Functional reconstruction of the medial collateral ligament with double-bundle allograft technique / 中华外科杂志

<p><b>OBJECTIVE</b>To discuss a new technique about reconstruction of medial collateral ligament (MCL) with double bundle allograft and to evaluate the short-term clinical efficacy.</p><p><b>METHODS</b>All 53 patients who suffered from valgus instability of the knee were selected. All cases were diagnosed of MCL injury because the medial gap of the knee widened more than 5 mm compared with collateral knee by the stress X-ray, MRI displayed discontinuity of MCL and valgus stress test was positive. All patients were accepted arthroscopic evaluation through inferomedial and inferolateral arthroscopy portal incisions to ascertain whether there were intra-articular injuries. An 8 cm incision was made from 1 cm superior adductor tubercle to 5 cm proximal medial tibia joint line in a longitudinal fashion. The anterior tibia insertion was defined as 15 mm lateral from the medial tibia edge and 45 mm under the medial tibia joint line. The posterior tibia insertion was defined as 15 mm lateral from the medial tibia edge and 20 mm under the medial tibia joint line. We used 5 mm or 6 mm reamer to drill the tibia tunnel along with guide pin, and then drill the femur tunnel with 6 mm or 7 mm drill in the top of the adductor tubercle about 25 mm or 30 mm length. The allograft was pulled into the tunnel from tibia to the femur and fixed with absorbable interference screw. Patients carried out active rehabilitation program after operation. One year after the operation, IKDC score, Lysholm score were used to evaluate the clinical effect.</p><p><b>RESULTS</b>The IKDC score (A or B, 86.78% vs. 0), Lysholm scores (89.7 ± 3.4 vs. 51.8 ± 4.9, t = -79.724, P < 0.05) were significantly improved compared with preoperative in all patients. Medial joint widened gap decreased from (10.4 ± 2.4) mm preoperative to (2.8 ± 1.5) mm postoperative from X ray and the differences were significant (t = 41.727, P < 0.05). Among these patients, the medial joint widened gap of 46 cases were less than 3 mm, 7 cases were from 3 mm to 5 mm. The range of motion was 135.4° ± 2.5° preoperative and 132.7° ± 3.7° postoperative. The 9 patients still had medial tenderness 1 year after operation.</p><p><b>CONCLUSION</b>Application double bundle allograft technique to reconstruct MCL can significantly improve the stability of the knee and the short-term clinical efficacy was sure.</p>

Arthroscopic single-bundle anterior cruciate ligament reconstruction with six-strand hamstring tendon and patellar tendon allograft / 中华外科杂志

<p><b>OBJECTIVE</b>To compare the outcome of arthroscopic single-bundle anterior cruciate ligament (ACL) reconstruction with six-strand hamstring tendon and patellar tendon allograft.</p><p><b>METHODS</b>From October 2006 to December 2009, 108 patients with arthroscopic single-bundle ACL reconstruction were retrospectively reviewed, with 58 patients with six-strand hamstring tendon (Group H), and 50 patients with patellar tendon allograft (Group P). Patients were available for clinical evaluation with KT-1000 arthrometer measurements, Lachman and pivot-shift test, and knee function with the International Knee Documentation Committee (IKDC), Lysholm scores.</p><p><b>RESULTS</b>All the patients were followed up at an average of 28.6 months (range 12 - 38 months). The average side-to-side difference was lesser for group H (1.2 ± 1.2) mm than group P (1.8 ± 1.5) mm (P < 0.05). On the pivot-shift test, 55 (94.8%) patients were negative and 3 (5.2%) were positive in group H, whereas 41 (82.0%) were negative and 9 (18.0%) were positive in group P, with significant difference between two groups (P < 0.05). All knee function scores were improved postoperatively, without statistically significant difference between the two groups (P > 0.05).</p><p><b>CONCLUSION</b>Arthroscopic single-bundle ACL reconstruction with six-strand hamstring tendon will achieve better knee stability than patellar tendon allograft.</p>

An experimental study on the basic fibroblast growth factor slow-releasing microsphere for knee osteoarthritis in the rabbit / 中华外科杂志

<p><b>OBJECTIVE</b>To study the therapeutic effect of chitosan-coated basic fibroblast growth factor (bFGF) slow-releasing microspheres on the knee osteoarthritis in the rabbit.</p><p><b>METHODS</b>From November 2008 to July 2009, 54 New Zealand rabbits were divided into 6 groups at random, which were the control group, the model group, the PBS-M group, the bFGF-S group, the 10-bFGF-M group and the 100-bFGF-M group, respectively. The model of knee osteoarthritis was induced by the injection of papain in the rabbit. Except the control and model groups, all the experimental groups were implanted 1 ml intervention solution at the third and sixth weeks, including the PBS microspheres, bFGF solution, 10 µg bFGF microspheres and 100 µg bFGF microspheres, respectively. The rabbits were sacrificed at the ninth week after operation, and then articular cartilage was conducted the morphological and histopathological evaluation.</p><p><b>RESULTS</b>The damage of articular cartilage in the model group was more serious than that in the control group, with statistical differences according to the Ink score (t = 8.22, P = 0.00) and Mankin score (t = 17.20, P = 0.00). The damage of articular cartilage in the PBS-M and bFGF-S groups were similar with that in the model group, according to the Ink score (t = 0.26, P = 0.79; t = 0.80, P = 0.45) and Mankin score (t = 1.51, P = 0.17; t = 0.56, P = 0.60). The Ink and Mankin scores in the 10-bFGF-M and 100-bFGF-M groups were better than that in the model group (Ink score: t = 3.58, P = 0.01; t = 6.82, P = 0.00; Mankin score: t = 3.41, P = 0.01; t = 5.00, P = 0.00), with the 100-bFGF-M group much better (t = 5.29, P = 0.00; t = 2.80, P = 0.02).</p><p><b>CONCLUSIONS</b>The bFGF slow-releasing microsphere can keep its effective intra-articular concentration, which may accelerate the synthesis of proteoglycan and inhibit its decomposition to reverse the damage of articular cartilage.</p>

The clinical value of cartilaginous surface and corresponding osseous contour of patellofemoral joint / 中华外科杂志

<p><b>OBJECTIVE</b>to investigate if the cartilaginous surface and corresponding osseous contour of the patellofemoral joint match in the axial plane for providing theoretical basis with evaluating alignment of patellofemoral joint and designing the part of patellofemoral joint in knee prosthesis.</p><p><b>METHODS</b>from January 2009 to March 2010, 9 human cadaver knees were prepared, which chandra of patellofemoral joint didn't degenerate. Each specimen was sectioned in the axial plane at 20° to 30° knee flax. The cross-sections revealed characteristics in the bony anatomy and corresponding articular surface geometry of the patellofemoral joint in the axial plane. Evaluating parameters included osseous patella congruence angle (OPCA), chondral patella congruence angle (CPCA), patella chondral convex point parameter (PCCPP), patella subchondral osseous convex point parameter (PSOCPP), the parameters of the deepest (chondral or osseous) point of the intercondylar sulcus. After that, the osseous and cartilaginous contours and subchondral osseous contours of the patella in the axial plane were analyzed through MRI data of 11 patients who didn't degenerate in patellofemoral joint cartilage. Parameters as same as cadaver knees were compared.</p><p><b>RESULTS</b>data from specimens of OPCA was (-4.5 ± 1.1)°, CPCA was (0.5 ± 0.8)°, PCCPP was 1.13 ± 0.11, PSOCPP was 1.67 ± 0.14, PCDPIS was 1.35 ± 0.28, PODPIS was 1.38 ± 0.33. Date from MRI of OPCA was (-3.8 ± 1.4)°, CPCA was (0.7 ± 1.0)°, PCCPP was 1.05 ± 0.21, PSOCPP was 1.73 ± 0.18, PCDPIS was 1.41 ± 0.21, PODPIS was 1.37 ± 0.27. The patella exhibited significant differences in the bony vs. chondral anatomy (P < 0.05), but the intercondylar sulcus nearly match in the bony vs. chondral anatomy.</p><p><b>CONCLUSIONS</b>the cartilaginous surface and corresponding osseous contour of the patella don't match in the patellofemoral joint axial plane, but that of the trochlea nearly matches. This is very important for accurately evaluating alignment of patellofemoral joint because the normal osseous alignment of patellofemoral joint don't represent the normal alignment and helpful for designing the part of patellofemoral joint in knee prosthesis.</p>

Comparison of clinical results between an isometric and an anatomic technique for medial patellofemoral ligament reconstruction / 中华外科杂志

<p><b>OBJECTIVE</b>To compare the clinical results of single-stranded isometric with double-stranded anatomic reconstruction of medial patellofemoral ligament (MPFL) for recurrent patellar dislocation.</p><p><b>METHODS</b>Retrospective analysis of 60 consecutive patients (72 knees) with recurrent patellar dislocation underwent medial patellofemoral ligament reconstruction between August 2004 and October 2008, 22 cases (27 knees) with single-stranded isometric reconstruction, 38 cases (45 knees) with double-stranded anatomic reconstruction. Postoperatively patellar stability was examined, and recurrent rate was recorded. Patellar lateral shift ratio and tilt were measured on CT scans. Knee function was evaluated with subjective questionnaire and the Kujala score.</p><p><b>RESULTS</b>All patients were followed up for more than 12 months without recurrent redislocation. (1) Recurrent instability rate was 18.5% in single-stranded group and 2.2% in double-stranded group, with statistical difference (P < 0.05). (2) The patellar tilt and lateral shift ratio returned to normal, without statistical difference between groups (P > 0.05). (3) The Kujala score were 59 ± 9 and 62 ± 9 preoperatively and 87 ± 4 and 94 ± 6 postoperatively in single- and double-stranded group, with statistical difference (P < 0.05). (4) The excellect rate was 85.2% in single-stranded group, 97.8% in double-stranded group, with statistical difference(P < 0.05).</p><p><b>CONCLUSION</b>Both reconstruction can improve patellar stability and knee function significantly, with double-stranded anatomic reconstruction better in clinic evaluation.</p>

Combination of medial patellofemoral ligament reconstruction with vastus medialis advancement for chronic patellar dislocation / 中华医学杂志(英文版)

<p><b>BACKGROUND</b>The medial patellofemoral ligament (MPFL) reconstruction is popular in clinical practice for chronic patellar dislocation; however, the combination with vastus medialis advancement is rare. The aim of this study was to evaluate the clinical outcome of the combination of MPFL reconstruction with vastus medialis advancement.</p><p><b>METHODS</b>We retrospectively analyzed 69 patients with chronic patellar dislocation between July 2004 and October 2008: twenty eight cases with isolated MPFL reconstruction (group I), forty one cases with the combination of MPFL reconstruction with vastus medialis advancement (group C). All patients had CT scans available for review with knee flexion at 30 degree, on which the congruence angle, patellar tilt angle and patellar lateral shift were measured. Physical apprehension tests were examined and the redislocation was recorded. In addition, knee function was evaluated using the Kujala score and subjective questionnaires.</p><p><b>RESULTS</b>Patients were followed up for a mean of 42 months (12 - 65 months) without a recurrent dislocation reported. Postoperatively, all indexes on CT scan were within the normal range without a statistical difference between the two groups. Results from the apprehension test showed eight patients in group I and three in group C had patellar lateral shift exceeding 1.5 cm with a hard end point (P < 0.05). The Kujala score improved significantly from 51.3 ± 4.5 to 79.9 ± 6.2 in group I and from 53.7 ± 5.2 to 83.9 ± 6.5 in group C (P > 0.05). However, the subjective questionnaire revealed a significant difference (P < 0.05), including 12 excellent, seven good and nine fair in group I and 30 excellent, six good and five fair in group C.</p><p><b>CONCLUSION</b>The combination of MPFL reconstruction with vastus medialis advancement is better than isolated reconstruction to improve the subjective effects and decrease the patellar instability rate for chronic patellar dislocation.</p>

The anatomical study of safe zones of the screw fixations in acetabular revision surgery / 中华外科杂志

<p><b>OBJECTIVE</b>To evaluate the safe zones of screw fixations of Jumbo cup and reinforcement rings in acetabular revision surgery.</p><p><b>METHODS</b>From December 2006 to January 2008, 11 fresh frozen human cadaver pelvises were prepared by removing all soft tissues except the medial neurovascular structures, each specimen was held in supine position with clamps. The anteroposterior radiographs were taken after the Jumbo cups or reinforcement rings were fixed in places. Left sides of acetabulum were used to create the models to evaluate the safe zones of the high hip center and Jumbo cups. Right sides were used to evaluate the safe zones of 3 different designs of acetabular reinforcement rings (Müller, Ganz, Burch-Schneider cage).</p><p><b>RESULTS</b>Jumbo cups: screws in the superoanterior and anteroinferior quadrants could cause neurovascular injuries. High hip center: neurovascular injuries could be expected in all quadrants except the inferoposterior and posterior half of superoposterior quadrant. Müller ring: screws placed in the intra-acetabular and extra-acetabular areas of the superoanterior quadrant could cause neurovascular injuries. Ganz ring:the screws placed in superoanterior quadrant and apex area were dangerous. The insults were confirmed in all of the specimens. Burch-Schneider cage: the medial nervous and vasculature structures were injured in all of the specimens if the screws placed in the superoanterior (intra-acetabular and extra-acetabular) quadrant. Screws for ischial fixation could cause sciatic nerve injury.</p><p><b>CONCLUSIONS</b>In revision acetabular surgery, the superoanterior quadrant, the anterior half of the superoposterior quadrant and the implant's central area are unsafe for screw fixation, especially when the exposed thread is longer than 15 mm.</p>

A cadaveric study of relationships among rotational alignment reference axes of distal femur and tibial mechanical axis / 中华外科杂志

<p><b>OBJECTIVES</b>To investigate the relationships among rotational alignment reference axes of distal femur and tibial mechanical axis, and determine the safest rotational alignment reference axis.</p><p><b>METHODS</b>Digital photos were taken of 30 cadaveric lower extremities with knee in extension and flexion at 90 degrees , angles were measured among tibial mechanical axis and a line perpendicular to clinical epicondylar axis, a line perpendicular to surgical epicondylar axis, Whiteside's line and femoral mechanical axis. Statistical analysis of relationships among those axes were performed.</p><p><b>RESULTS</b>The angles among the tibial mechanical axis and a line perpendicular to the clinical epicondylar axis, a line perpendicular to the surgical epicondylar axis, Whiteside's line and femoral mechanical axis were 0.6 degrees varus, 3.9 degrees varus, 0.2 degrees valgus and 3.0 degrees varus respectively. The angle between the femoral mechanical axis and the tibial mechanical axis was significantly larger than the angles among the tibial mechanical axis and a line perpendicular to the clinical epicondylar axis, the Whiteside's line (P < 0.05). There was no significant difference compared with the angle between a line perpendicular to the surgical epicondylar axis and the tibial mechanical axis. Angles of the clinical epicondylar axis, the surgical epicondylar axis and the Whiteside's line between knee extension and flexion were 2.3 degrees valgus, 0.9 degrees varus and 3.1 degrees valgus respectively.</p><p><b>CONCLUSION</b>The surgical epicondylar axis rather than the clinical epicondylar axis or the Whiteside's line is the safest femoral rotational alignment reference axis intraoperatively.</p>

Arthroscopic simultaneous reconstruction of posterior cruciate ligament using double femoral tunnel technique and anterior cruciate ligament with achilles allograft / 中华外科杂志

<p><b>OBJECTIVES</b>To introduce the technique of arthroscopic simultaneous reconstruction of posterior cruciate ligament (PCL) using double femoral tunnel, single-bundle transtibial tunnel PCL technique and anterior cruciate ligament (ACL) with achilles allograft, and to evaluate the clinical outcome.</p><p><b>METHODS</b>Fourteen patients with PCL and ACL injuries after a minimum follow-up 18 months were received. Arthroscopically assisted simultaneous ACL/PCL reconstruction with achilles allograft were performed using the single-incision endoscopic ACL technique and the double femoral tunnel, single-bundle transtibial tunnel PCL technique. The Lysholm and Tegner knee score scale were used for functional evaluation. All patients were evaluated with physical examination and KT-1000 arthrometer testing. The mean knee flexion was (123.6 +/- 2.5) degrees preoperatively. The Lysholm score was 52.8 +/- 2.2. The Tegner score was 5.9 +/- 0.5 before injury, 1.2 +/- 0.9 preoperatively.</p><p><b>RESULTS</b>The mean time from injury to the reconstructive procedure was 19.5 d. The mean knee flexion was (117.9 +/- 2.8) degrees postoperatively( t = 1.54, P = 0.14). As to the Lachman test for 14 patients, the results of 13 patients (92.9%) was negative. As to posterior drawer test, the results of 12 patients (85.7%) was negative. The Lysholm score was 92.9 +/- 3.3 at final evaluation (t = 17.009, P < 0.001). KT-1000 arthrometer testing at 25 degrees knee flexion showed that the side-to-side difference was below 2 mm in 9 cases, 3-5 mm in 4 cases, 6 mm in 1 case. At 75 degrees knee flexion the difference was below 2 mm in 10 cases, 3-5 mm in 3 cases, 6 mm in 1 case. The Tegner score was 5.4 +/- 0.8 at final evaluation. The difference between the preoperative score and the postoperative was statistically significant (F = 4.2, P < 0.01).</p><p><b>CONCLUSIONS</b>Combined ACL and PCL injuries can be successfully treated with arthroscopic simultaneous reconstruction of PCL using double femoral tunnel technique and ACL with achilles allograft. The double femoral tunnel technique more closely approximates the anatomic insertion the native PCL. Most patients recover a functionally stable knee.</p>

The incidence and variation of tunnel enlargement after anterior cruciate ligament reconstruction / 中华外科杂志

<p><b>OBJECTIVE</b>To investigate the incidence and variation of tunnel enlargement after anterior cruciate ligament (ACL) reconstruction.</p><p><b>METHODS</b>ACL reconstructions using hamstring tendons were performed in 58 patients (58 knees) in the study. MRI scans were taken in a consistent manner at 1, 3, 6, 12 and 24 months after surgery to measure tibial and femoral tunnel expansion.</p><p><b>RESULTS</b>Femoral tunnel enlargement was observed in 9 knees (9/58, 15.5%); Tibial tunnel enlargement was found in 12 knees (12/58, 20.7%). Of those with enlarged bone tunnels, there was no significant difference of tunnel diameters between 1 and 3 months after surgery (P>0.05). Six, 12 and 24 months postoperatively, the average tunnel diameters were larger than those of 1 or 3 months after surgery (P<0.05), however, no significant difference was found in between the tunnel diameters 6, 12 and 24 months postoperatively either (P>0.05).</p><p><b>CONCLUSION</b>Tunnel expansion mainly occurs during 3 to 6 months after surgery, and it remains basically unchanged between 12 and 24 months postoperatively.</p>

Effect of increased posterior tibial slope or partial posterior cruciate ligament release on knee kinematics of total knee arthroplasty / 中华外科杂志

<p><b>OBJECTIVE</b>To compare the effects of increased posterior tibial slope or partial posterior cruciate ligament (PCL) release on knee kinematics of total knee arthroplasty (TKA).</p><p><b>METHODS</b>Anteroposterior laxity, rotational laxity, varus and valgus laxity and maximum flexion angle were evaluated in 6 normal cadaver knees and the knees after TKA at flexion 0 degrees , 30 degrees , 60 degrees , 90 degrees and 120 degrees . Then the femoral prosthesis was shifted 5 mm posteriorly to simulate the tightly implanted knee. The same tests were performed on the tightly implanted knees. After that, the posterior tibial slope was increased 4 degrees or the PCL was partially released, and the same tests were made as in the normal knees respectively. Statistical analysis of the results was made using student's t test.</p><p><b>RESULTS</b>Anteroposterior laxity, rotational laxity and varus and valgus laxity of the tightly implanted knees at flexion 30 degrees , 60 degrees , 90 degrees and 120 degrees were significantly less than those of the normal TKA knees (P < 0.05). Compared with the tightly implanted knees, anteroposterior laxity, rotational laxity and varus and valgus laxity at flexion 30 degrees , 60 degrees , 90 degrees and 120 degrees significantly improved after increased 4 degrees posterior tibial slope (P < 0.05); in the partial PCL released group, anteroposterior laxity at flexion 30 degrees , 60 degrees , 90 degrees and 120 degrees was significantly improved (P < 0.05), varus and valgus laxity was significantly improved only at flexion 90 degrees (P < 0.05), and rotational laxity was significantly improved at flexion 30 degrees , 60 degrees and 90 degrees (P < 0.05). Compared with PCL released group, varus and valgus laxity at flexion 30 degrees , 60 degrees and 90 degrees and rotational laxity at flexion 0 degrees , 30 degrees , 60 degrees and 90 degrees were significantly improved in the group of increased 4 degrees posterior tibial slope (P < 0.05). Maximum flexion angle of the tightly implanted knee (120.4 degrees ) was less than that of the normal TKA knees (130.3 degrees , P < 0.05) and that of increased 4 degrees posterior tibial slope group (131.1 degrees , P < 0.05). There was no significant difference at the maximum flexion angle between the increased 4 degrees posterior tibial slope group and the PCL released group (131.1 degrees vs 124.0 degrees , P = 0.0816).</p><p><b>CONCLUSIONS</b>Anteroposterior laxity, varus and valgus laxity, rotational laxity and maximum flexion angle of the tightly implanted knees are less than those of the normal TKA knees. After increased 4 degrees posterior tibial slope, these indexes are improved significantly. Partial PCL released can significantly improve the anteroposterior laxity and had less effect on the varus and valgus laxity, rotational laxity and maximum flexion angle. So, a knee that is tight in flexion can be more likely to be corrected by increasing posterior tibial slope than by partially releasing PCL.</p>

In vitro study of knee stability after two-band two-tunnel posterior cruciate ligament reconstruction / 中华创伤杂志(英文版)

<p><b>OBJECTIVE</b>To compare the ability of three different reconstruction procedures in restoring the posterior displacement of tibia and the posterior stability of the knee joint from 0 degree to 120 degrees flexion.</p><p><b>METHODS</b>Three posterior cruciate ligaments (PCL) reconstruction procedures were performed, namely two-band two-tunnel reconstruction, one-band anterior tunnel reconstruction and one-band posterior tunnel reconstruction. The posterior displacement of the tibia in relation to the femur was measured when a 200N posterior force was applied.</p><p><b>RESULTS</b>Within the flexion range of 0 degree to 30 degrees, the displacement in the one-band posterior tunnel reconstruction showed little difference from that of an intact knee (P>0.05). But when the flexion exceeded 30 degrees, especially when it exceeded 60 degrees, the displacement in one-band posterior tunnel reconstruction was much greater than that of an intact knee (P<0.01). In two-band two-tunnel reconstruction and one-band anterior tunnel reconstruction, the displacement was approximately the same as that of an intact knee ranging from 0 degree to 120 degrees (P>0.05), while a slight over-restriction might be found at some angles.</p><p><b>CONCLUSIONS</b>Two-band reconstruction could effectively restrict the posterior displacement of the tibia and restore anterior, posterior stability of the knee joint within its full range of flexion. One-band anterior tunnel reconstruction also could maintain the posterior stability of the knee, while the result of one-band posterior tunnel reconstruction is the most unsatisfactory.</p>

Application of bipolar radiofrequency energy in the treatmemt of elongated anterior cruciate ligament reconstruction / 中华外科杂志

<p><b>OBJECTIVE</b>To introduce the application of bipolar radiofrequency energy in the treatment of elongated anterior cruciate ligament (ACL) reconstruction during arthroscopy.</p><p><b>METHODS</b>From January 2002 to June 2003, 12 cases whose anterior cruciate ligament reconstruction were elongated accepted the therapy of bipolar radiofrequency energy during arthroscopy. The 12 patients included 11 men and 1 woman with an average age of 30 years ranging from 18 to 45 years old. The ACL grafts were composed of 5 patellar tendons and 7 semitendinosus tendons. The elongated reconstruction were treated by bipolar radiofrequency energy with an output of 284W. This was continued until the elongated reconstruction were tight. After the operation, the patients received unlimited orthosis and were conducted to do functional exercise of the knees. All the patients were followed up. The Lysholm-Tegner score and clinical examination of the knees were recorded and analyzed statistically with paired t text.</p><p><b>RESULTS</b>The elongated ACL reconstruction became shrinkage and tighten after treated by bipolar radiofrequency energy. The palpation by hook and Lachman test showed negative results. The follow-up time was 5-13 months, averaged 8 months. The postoperative mean Lysholm-Tegner score of the knee was 88.5, which was significantly higher than that of preoperative score of 45.5 (P < 0.01). All the patients had no postoperative complications.</p><p><b>CONCLUSION</b>By application of bipolar radiofrequency energy, the elongated ACL reconstruction can be shrunk and tightened to make the knees stabilize. The shrinkage procedure is simple, convenient and effective.</p>