Study on the biodegradation of perfluorooctanesulfonate (PFOS) and PFOS alternatives

OBJECTIVES: In this study, we investigated the biodegradation features of 4 perfluorooctanesulfonate (PFOS) alternatives developed at Changwon National University compared to those of PFOS. METHODS: Biodegradation testing was performed with microorganisms cultured in the good laboratory practice laboratory of the Korea Environment Corporation for 28 days following the Organization for Economic Cooperation and Development guidelines for the testing of chemicals (Test No. 301 C). RESULTS: While C₈F₁₇SO₃Na, PFOS sodium salt was not degraded after 28 days, the 4 alternatives were biodegraded at the rates of 20.9% for C₁₅F₉H₂₁S₂O₈Na₂, 8.4% for C₁₇F₉H ₂₅S₂O₈Na₂, 22.6% for C₂₃F₁₈H₂₈S₂O₈Na₂, and 23.6% for C₂₅F₁₇H₃₂O₁₃S₃Na₃. CONCLUSIONS: C₂₅F₁₇H₃₂S₃O₁₃Na₃, C₂₃F₁₈H₂₈S₂O₈Na₂, and C₁₅F₉H₂₁S₂O₈Na₂ were superior to PFOS in terms of biodegradation rates and surface tension, and thus they were considered highly applicable as PFOS alternatives. Environmental toxicity, human toxicity, and economic feasibility of these compounds should be investigated prior to their commercialization.

Analysis of the utilization of existing test data for phase-in substance registration under the Act on the Registration and Evaluation, etc. of Chemical Substances

OBJECTIVES: Approximately 2000 phase-in substances are subject to registration according to the Act on the Registration and Evaluation, etc. of Chemical Substances (KREACH), and the expected testing cost is 2.06 trillion Korean won assuming all the test data required for registration are acquired. The extent to which these enormous test costs can be reduced depends on the availability of existing data that can be used to meet the requirements of the K-REACH we examined the current availability of test data that can be used for chemical substance registration. METHODS: We analyzed the possibility of utilizing the existing test data obtained from 16 reference databases for 369 of 518 kinds of phase-in substances subject to registration that were reported in last October 2014. RESULTS: The physical and chemical properties were available for 57.1% of substances, whereas data regarding human hazards and environmental hazards were available at considerably lower rates, 8.5% and 11.8%, respectively. CONCLUSIONS: Physical and chemical properties were available for a fairly high proportion, whereas human hazards and environmental hazards were reported for considerably fewer substances.

Study on the biodegradation of alternatives (four species including C8H8F9KO3S) for perfluorooctane sulfonate

OBJECTIVES: The objective of this study was to evaluate the biodegradation potential of four perfluorooctane sulfonic acid (PFOS) alternatives that were developed at Changwon National University. While PFOS has been used widely in industrial and consumer products, it is known to be a persistent organic pollutant. Therefore, greener alternatives are highly desirable. METHODS: Biodegradation tests were run for 28 days using standard test protocols. The biochemical oxygen demand was measured daily throughout the experimental period, and the data were used to calculate the biodegradation rates. Microorganisms were isolated from the some of the tests that showed evidence of biodegradation. RESULTS: C8H8F9KO3S, which has the same number of carbons as the parent compound PFOS but a reduced number of fluorines, showed the highest biodegradation rate followed by C10H8F13KO3S. Chemical alternatives with lower number of carbons did not biodegrade readily in the experiments. CONCLUSIONS: Together, these results suggest that it may be advantageous to develop PFOS alternatives with 8 carbons, the same as PFOS, but a reduced number of fluorines; as such, chemicals are more susceptible to biodegradation than the parent compound.

Existing test data for the Act on Registration & Evaluation, etc. of Chemical Substances

OBJECTIVES: In this study, the possibility of using existing test data provided in Korea and elsewhere for the registration of chemical substances was examined. Data on 510 chemical substances that are among the first subject to registration under the “Act on the Registration and Evaluation, etc. of Chemical Substances (K-REACH)” were analyzed. METHODS: The possibility of using existing data from 16 reference databases was examined for 510 chemical substances notified in July 2015 as being subject to registration. RESULTS: Test data with the reliability required for the registration of chemical substances under the K-REACH constituted 48.4% of the required physicochemical characteristics, 6.5% of the required health hazards, and 9.4% of the required environmental hazards. CONCLUSIONS: Some existing test data were not within the scope of this research, including data used for registration in the European Union (EU). Thus, considering that 350 of these 510 species are registered in EU Registration, Evaluation, Authorisation & Restriction of Chemicals, more test data may exist that can be utilized in addition to the data identified in this study. Furthermore, the K-REACH states that non-testing data (test results predicted through Read Across, Quantitative Structure- Activity Relationships) and the weight of evidence (test results predicted based on test data with low reliability) can also be utilized for registration data. Therefore, if methods for using such data were actively reviewed, it would be possible to reduce the cost of securing test data required for the registration of chemical substances.

Existing test data for the Act on Registration & Evaluation, etc. of Chemical Substances

OBJECTIVES: In this study, the possibility of using existing test data provided in Korea and elsewhere for the registration of chemical substances was examined. Data on 510 chemical substances that are among the first subject to registration under the “Act on the Registration and Evaluation, etc. of Chemical Substances (K-REACH)” were analyzed. METHODS: The possibility of using existing data from 16 reference databases was examined for 510 chemical substances notified in July 2015 as being subject to registration. RESULTS: Test data with the reliability required for the registration of chemical substances under the K-REACH constituted 48.4% of the required physicochemical characteristics, 6.5% of the required health hazards, and 9.4% of the required environmental hazards. CONCLUSIONS: Some existing test data were not within the scope of this research, including data used for registration in the European Union (EU). Thus, considering that 350 of these 510 species are registered in EU Registration, Evaluation, Authorisation & Restriction of Chemicals, more test data may exist that can be utilized in addition to the data identified in this study. Furthermore, the K-REACH states that non-testing data (test results predicted through Read Across, Quantitative Structure- Activity Relationships) and the weight of evidence (test results predicted based on test data with low reliability) can also be utilized for registration data. Therefore, if methods for using such data were actively reviewed, it would be possible to reduce the cost of securing test data required for the registration of chemical substances.