Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 2 de 2
Filter
Add filters








Year range
1.
Eng. sanit. ambient ; 15(4): 357-366, out.-dez. 2010. ilus, graf, tab
Article in Portuguese | LILACS | ID: lil-578701

ABSTRACT

O objetivo deste trabalho foi caracterizar os efluentes gerados em cabines de pintura de uma indústria moveleira e avaliar a eficiência de sistemas biológicos (anaeróbio e aeróbio) para o seu tratamento. O efluente industrial apresentou elevado teor de matéria orgânica (DQO total de 634 a 2.790 mg.L-1; DBO5 total de 360 a 972 mg.L-1) e baixos teores de macronutrientes (NTK de 1,9 mg.L-1 e Ptotal de 0,5 mg.L-) e metais tóxicos. Os ensaios de tratabilidade em reator UASB (~25ºC e tempo de detenção hidráulica - TDH = 10 horas), indicaram uma eficiência máxima de remoção de matéria orgânica de 90 por cento na composição volumétrica 70:30 (efluente industrial:esgoto sanitário). A alimentação do reator UASB só com efluente industrial resultou em acúmulo de ácidos graxos voláteis e inibição microbiana, mas o uso de pós-tratamento aeróbio (TDH = 96h) garantiu elevada eficiência global (~88 por cento) de remoção de matéria orgânica.


The main objective of this work was to characterize the wastewater from the dying hood of a woven furniture industry, and to assess the efficiency of biological processes (anaerobic and aerobic) for its treatment. The physical-chemical characterization of the industrial wastewater showed a high organic matter content (total COD from 634 to 2,790 mg.L-1; total BOD5 from 360 to 972 mg.L-1), low content of macronutrients (NTK of 1.9 mg.L-1 and P of 0.5 mg.L-1) and toxic metals. The anaerobic degradation tests in a bench-scale UASB reactor (25ºC and hydraulic retention time - HRT = 10 hours) showed that a maximum removal efficiency of 90 percent was obtained when the reactor was fed with 30 percent raw sewage and 70 percent industrial wastewater. The feeding of UASB reactor with only industrial wastewater resulted in volatile fatty acids accumulation and microbial inhibition; however, the use of aerobic post-treatment (HRT = 96 hours) granted a high (~88 percent) organic matter removal efficiency.

2.
Eng. sanit. ambient ; 13(3): 271-277, jul.-set. 2008. ilus, tab
Article in Portuguese | LILACS | ID: lil-493945

ABSTRACT

O presente trabalho caracterizou e avaliou a tratabilidade dos efluentes líquidos produzidos no campus da Universidade Federal de Ouro Preto. Os parâmetros físico-químicos mostraram que o efluente do campus possui uma característica típica a dos esgotos domésticos, com valores médios de DBO5 total, DQO total, NTK e P total de 300 mg.L-1, 670 mg.L-1, 56 mg.L-1 e 6 mg.L-1 respectivamente. Dos metais monitorados somente o Fe (0,847 mg/L), Al (0,355 mg/L) e Zn (0,389 mg/L) estavam presentes em maiores concentrações, mais ainda assim, tais concentrações eram inferiores aos va-lores considerados tóxicos para microrganismos. Os testes de biodegradabilidade mostraram que, a despeito da potencial presença de compostos orgânicos tóxicos, o efluente final pode ser biodegradado aerobiamente (97 por cento de eficiência, K1app = 1,73 d-1) e anaerobiamente (50 por cento de eficiência, AME = 0,0579 gDQO CH4/gSSV.d).


The aim of this study was to characterize and evaluate the tratability of wastewater produced in the campus of the Federal University of Ouro Preto (UFOP). The physical-chemical parameters showed the wastewater from the campus had characteristics of typical domestic wastewater, with average values of total BOD, total COD, Kjeldahl Nitrogen and total phosphorus of 300 mg.L-1, 670 mg.L-1, 56 mg.L-1 e 6 mg.L-1 respectively. Only the metals Fe (0,847 mg/L), Al (0,355 mg/L) and Zn (0,389 mg/L) were present in higher concentration, nonetheless, such concentrations were below the thresholds limits for microbial toxicity. The biodegradability tests showed that despite the potential presence of toxic organic compounds, the wastewater could be degraded aerobically (97 percent efficiency, K1app = 1,73 d-1) and anaerobically (50 percent efficiency, AME = 0,0579 gDQO CH4/gSSV.d).

SELECTION OF CITATIONS
SEARCH DETAIL