Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 43
Filter
1.
Pesqui. bras. odontopediatria clín. integr ; 23: e220056, 2023. tab, graf
Article in English | LILACS, BBO | ID: biblio-1529134

ABSTRACT

ABSTRACT Objective: To evaluate the association of oral health-related quality of life (OHRQoL) with the longevity of ART-restorations in children after 18 months. Material and Methods: A longitudinal clinical study with 62 six- to seven-year-old children, both genders, 31 of whom underwent four weeks of oral health education strategy (OHES) followed by ART (GOHES+ART) and the others only ART (GART). The Brazilian short-version of the Child Perceptions Questionnaire (16-CPQ8-10) was used to evaluate the OHRQoL and the perception of change in oral health was assessed by a single question. Data was analyzed using Mann-Whitney, Wilcoxon and Friedman's tests. Results: After 18 months, GOHES+ART reported a greater impairment on OHRQoL, mainly in oral symptoms domain (p<0.05). In this period, greater impairment of oral symptoms was reported in children with failed restorations and with treatment considered to have a minor failure (p<0.05). In inter-group analysis, the GOHES+ART, with 2 to 4 restorations, Class I, of small size, located in the upper arch and with a smaller failure, reported more oral symptoms than the GART. Conclusion: In the long-term, children submitted to OHES followed by ART reported more oral symptoms. Factors such as number, class, size and location of the restorations need to be considered for the implementation of an efficient and effective oral health program, as well as for greater longevity of ART-restorations.


Subject(s)
Humans , Male , Female , Child , Quality of Life/psychology , Oral Health , Dental Caries/therapy , Dental Atraumatic Restorative Treatment , Data Interpretation, Statistical , Longitudinal Studies , Statistics, Nonparametric , Dental Restoration, Permanent
2.
Arq. odontol ; 59: 106-113, 2023. ilus
Article in English | LILACS, BBO | ID: biblio-1518971

ABSTRACT

Aim: The purpose of this study was to evaluate the efficacy to determine the root canal length, in vitro,of both the electronic apex locator (M2) and the autostop (AS - M3) functions of the Endus Duo Gnatus endodontic motor (Gnatus, São Paulo, SP, Brazil). Methods: Thirty extracted human single-rooted premolars had their root canal lengths (TLs) up to the apical foramen determined using the Endus Duo Gnatus in two ways: (1) In the stainless steel (SS) control group, the measurement was obtained using a stainless steel hand instrument with the electronic locator mode (M2 function) connected to a stainless-steel hand instrument (K-file #15). In the NiTi rotary instrument (NiTi RI) intervention group, the measurement was obtained during the instrumentation (M3 function) of the root canals with a nickel-titanium rotary instrument (Hyflex CM: Coltene Whaledent, Cuyahoga Falls, OH, USA), size 25/.06. The NiTi manually used instrument (NiTi MUI) Intervention group performed the measurement in locator mode using a Hyflex instrument, placed to true length manually. Statistical analysis was performed using ANOVA followed by the Tukey post-hoc test with a significance level of p < 0.05. Results: The true mean length and standard deviation (SD) of the standardized root canals were 18.40 ± 2.14mm, while the mean lengths and standard deviations (SD) were 18.29 ± 1.89mm, 18.22 ± 1.85mm, and 17.24 ± 2.09mm for the SS, NiTi RI, and NiTi MUI groups, respectively. However, data from the NiTi MUI Intervention group indicated shorter root canal lengths when compared to the SS control group and the NiTi RI Intervention group values, and were significantly shorter than the true canal length (p < 0.001). Conclusions:The use of the motor in NiTi RI Intervention group showed acceptable results. However, the NiTi MUI Intervention group resulted in unacceptable short measurements.


Objetivo: O objetivo deste estudo foi avaliar a eficácia na determinação do comprimento do canal radicular, in vitro, das funções localizador eletrônico foraminal (M2) e auto-parada durante a instrumentação (M3) do motor endodôntico Endus Duo Gnatus ( Gnatus, São Paulo, SP, Brasil). Métodos: Trinta pré-molares humanos uniradiculares extraídos tiveram seus comprimentos de canais radiculares (CRTs) até o forame apical determinados usando o Endus Duo Gnatus de duas maneiras: (1) No grupo controle de aço inoxidável (SS), a medida foi obtida usando um instrumento manual de aço inoxidável com modo de localização eletrônica foraminal (função M2) conectado a um instrumento manual de aço inoxidável (lima tipo K #15). No grupo intervenção instrumento rotatório NiTi (NiTi RI), a medida foi obtida durante a instrumentação (função M3) dos canais radiculares com instrumento rotatório de níquel-titânio (Hyflex CM: Coltene Whaledent, Cuyahoga Falls, OH, EUA), tamanho 25/.06. O grupo de intervenção NiTi instrumento usado manualmente (NiTi MUI) realizou a medição no modo localizador foraminal usando um instrumento Hyflex, colocado manualmente no comprimento real do dente. A análise estatística foi realizada por meio de ANOVA seguida do teste post-hoc de Tukey com nível de significância de p < 0,05. Resultados: Os comprimentos reais médios dos dentes e desvios-padrão (DP) dos canais radiculares padronizados foram 18,40 ± 2,14 mm, enquanto os comprimentos médios e desvios- padrão (DP) foram 18,29 ± 1,89 mm, 18,22 ± 1,85 mm e 17,24 ± 2,09 mm para os grupos SS, NiTi RI e NiTi MUI, respectivamente. No entanto, os dados do grupo de intervenção NiTi MUI indicaram comprimentos de canais radiculares mais curtos quando comparados aos valores do grupo controle SS e do grupo de intervenção NiTi RI, e foram significativamente mais curtos que o comprimento real do canal (p < 0,001). Conclusões: A utilização do motor no grupo Intervenção NiTi RI apresentou resultados aceitáveis. No entanto, o grupo de intervenção NiTi MUI resultou em medições curtas inaceitáveis.


Subject(s)
Weights and Measures , Dental Equipment , Dental Pulp Cavity , Endodontics
3.
Rev Enferm UFPI ; 11(1): e2809, 2022-12-31. tab
Article in English, Portuguese | LILACS, BDENF | ID: biblio-1519111

ABSTRACT

Objetivo: Identificar o conhecimento dos enfermeiros atuantes no setor de emergência sobre a identificação e tratamento inicial da sepse. Métodos: Estudo descritivo, transversal, quantitativo, desenvolvido na emergência de um hospital público de Roraima, com 25 enfermeiros. Os dados sociodemográficos, ocupacionais e de conhecimento dos enfermeiros sobre sepse foram coletados por meio de um formulário estruturado online através do Google Forms e analisados utilizando-se estatística descritiva por meio do programa Statistical Package for the Social Sciences(SPSS) versão 20.0. Resultados: Dentre os participantes, 76,0% relataram não terem recebido treinamento sobre sepse e não possuírem conhecimento sobre a existência de protocolos de sepse na instituição. Quanto às questões específicas sobre sepse, 68,0% apresentaram conhecimento desatualizado sobre a definição atual e os sinais clínicos dasepse. O manejo inicial de sepse, tempo ideal para administrar a primeira dose do antibiótico e iniciar antibiótico de amplo espectro, foram as questões que obtiveram melhores percentuais de acerto, com 88,0% e 80,0%, respectivamente. Conclusão: Verificou-se que há lacunas no conhecimento dos enfermeiros da emergência sobre a identificação e o tratamento precoce da sepse, justificando a necessidade urgente de realização de capacitações e implantação de protocolos clínicos sobre o tema na instituição. Descritores:Identificação da Emergência. Sepse. Enfermeiras e Enfermeiros. Planejamento de Assistência ao Paciente. Emergências


Objective: To identify the knowledge of nurses working in the emergency sector about the identification and initial treatment of sepsis.Methods: Descriptive, cross-sectional, quantitative study, developed in the emergency room of a public hospital in Roraima, with 25 nurses. Sociodemographic, occupational and nurses' knowledge of sepsis data were collected by applying a structured online form using Google Forms and analyzed using descriptive statistics employing the Statistical Package for the Social Sciences (SPSS) version 20.0. Results:Among the participants, 76.0% reported not having received training on sepsis and not having knowledge about the existence of sepsis protocols in the institution. As for the specific questions about sepsis, 68.0% had outdated knowledge about the current definition and clinical signs of sepsis. The initial management of sepsis, the ideal time to administer the first dose of the antibiotic and start a broad-spectrum antibiotic, were the questions that obtained the best percentages of correct answers, with 88.0% and 80.0%, respectively. Conclusion:It was found that there are gaps in the knowledge of emergency nurses on the identification and early treatment of sepsis, justifying the urgent need for training and implementation of clinical protocols on the subject in the institution.Descriptors:Emergency Identification. Sepsis. Nurses. Patient Care Planning. Emergencies.


Subject(s)
Patient Care Planning , Sepsis , Emergency Identification , Emergencies , Nurses
4.
RGO (Porto Alegre) ; 70: e20220018, 2022. tab, graf
Article in English | LILACS-Express | LILACS, BBO | ID: biblio-1376099

ABSTRACT

ABSTRACT Objective: Compare the accuracy of early diagnosis of simulated internal root resorptions and external root resorption, using digital periapical radiography and cone beam computed tomography. Methods: Root resorption were simulated in extracted human teeth by demineralization with 5% nitric acid solution and 8% Sodium Hypochlorite in different periods (1 and 5 days). For the group external root resorption (n=12) composite resin cylinders were positioned on middle third of buccal surface of roots, to delimit application of demineralization substances. In group internal root resorptions (n=12) the teeth were sectioned longitudinally, and the composite resin cylinders were positioned in the middle third of root canals. The teeth were mounted in a dry mandible and evaluated by digital radiography and tomography. The images were evaluated by two examiners. Results: Analyzing the tomographic images in period of 1 day, the examiner 2 identified internal root resorptions that were not identified in radiographic images (p<0.05). No examiner was capable of diagnosing external root resorption irrespective of exam, in the group of 1 day (p>0.05). In 5 day period of induction, both exams identified internal root resorptions (p>0.05), however, the tomographic images were more effective in identifying external root resorption (p <0.05) for both examiners. Conclusion: Cone beam computed tomography was shown to be more effective than digital periapical radiography for detecting internal root resorptions with 1 day of induction. The imaginological resources used in this study were not able to early detect external root resorption.


RESUMO Objetivo: Comparar a acurácia do diagnóstico precoce de reabsorções radiculares interna (RRI) e reabsorções radiculares externa (RRE) simuladas, por meio de radiografia periapical digital e tomografia computadorizada de feixe cônico. Métodos: Reabsorções radiculares foram simuladas em dentes humanos extraídos utilizando a desmineralização com ácido nítrico 5% e hipoclorito de sódio 8% em diferentes períodos (1 e 5 dias). Para o grupo reabsorções radiculares externa (n=12) cilindros de resina composta foram posicionados no terço médio das faces vestibulares das raízes, delimitando a aplicação das substâncias de desmineralização. No grupo reabsorções radiculares interna (n=12) os dentes foram seccionados longitudinalmente, e os cilindros de resina posicionados no terço médio dos canais radiculares. Os dentes foram montados em mandíbula seca e avaliados por meio de radiografia digital e tomografia por dois examinadores. Resultados: Nas imagens tomográficas no período de 1 dia, o examinador 2 identificou reabsorções radiculares interna as quais não foram identificadas nas radiografias (p<0,05). Nenhum examinador foi capaz de diagnosticar as reabsorções radiculares externa independente do exame no grupo de 1 dia (p>0.05). No período de indução de 5 dias ambos os exames identificaram as reabsorções radiculares interna (p>0,05), entretanto, as tomografias foram mais eficazes na identificação das reabsorções radiculares externa (p<0,05) para ambos os examinadores. Conclusão: A tomografia computadorizada de feixe cônico mostrou-se mais eficaz do que a radiografia periapical digital na detecção de reabsorções radiculares interna com 1 dia de indução. Os recursos imaginológicos utilizados neste estudo não foram capazes de detectar precocemente a reabsorção radicular externa.

5.
Pesqui. bras. odontopediatria clín. integr ; 22: e210179, 2022. tab, graf
Article in English | LILACS, BBO | ID: biblio-1422279

ABSTRACT

Abstract Objective: To assess the incidence of caries in a two-year period among low birth weight (LBW), very low birth weight (VLBW), and extremely low birth weight (ELBW) children considering socioeconomic indicators, dietary factors and oral hygiene. Material and Methods: A convenience sample was formed of 42 low birth weight children aged two to five years at baseline. Two examiners diagnosed caries using the World Health Organization criteria. Birth weight, socioeconomic indicators and diet were collected from medical records and questionnaires. Binomial models were used to estimate unadjusted and adjusted rate ratios (RR) and respective 95% confidence intervals for the factors evaluated. Results: Thirty-six children were re-examined after two years. The incidence of dental caries was 36.7%. The dmft index was 0.44 (±1.25) at baseline and increased to 1.36 (±3.85) at follow-up. VLBW children (1,000 to 1,500 g) (RR=0.23; 95%CI: 0.08-0.72) and LBW children (1,500 to 2,500 g) (RR=0.06; 0.01-0.55) had fewer carious lesions compared to ELBW children (<1,000 g). Carious lesions were more frequent among children with a lower income (RR=6.05; 1.05-34.84) and less frequent among those who did not consume sweetened juice, tea or yogurt (RR: 0.21; 0.07-0.62). Conclusion: An inverse dose-response relation was found between birth weight and the incidence of caries. A lower income and the consumption of sweetened beverages were risk factors for the development of caries (AU).


Subject(s)
Humans , Male , Female , Child, Preschool , Infant, Low Birth Weight , Infant, Premature , Child , Oral Health , Risk Factors , Dental Caries/epidemiology , Medical Records , Incidence , Surveys and Questionnaires , Cohort Studies , Models, Statistical , Social Indicators
6.
Rev. Fac. Odontol. Porto Alegre (Online) ; 62(1): 108-120, jan.-jun. 2021.
Article in Portuguese | LILACS, BBO | ID: biblio-1445001

ABSTRACT

Introdução: A indicação de higiene bucal em bebês edêntulos entre os profissionais de saúde ainda é controversa, sendo necessária a busca científica sobre esta indicação e a padronização da informação. Objetivo: Investigar criticamente as evidências relacionadas a indicação da higiene bucal para bebês edêntulos. Métodos: A busca de artigos foi realizada nas bases de dados PubMed, LILACS e Google Scholar, de modo a avaliar a seguinte pergunta: "A higienização da cavidade bucal de bebês edêntulos pode influenciar a microbiota bucal?". Uma busca em 8 livros de Odontopediatria também foi realizada. Resultados: Foram encontrados 317 artigos (167-PubMed, 146-Google Scholar e 4-LILACS). Não foram encontrados estudos primários que avaliaram o efeito da higiene bucal em bebês edêntulos na microbiota, impossibilitando a condução de revisão sistemática. Assim, para a revisão foram incluídos 6 estudos que investigaram micro-organismos na cavidade bucal de bebês edêntulos e o papel das imunoglobulinas salivares. Dentre os livros avaliados, somente 4 indicaram a higiene bucal em bebês edêntulos. Conclusão: Diante dos dados analisados, não existem estudos primários que avaliaram o efeito da higienização na microbiota bucal de bebês edêntulos. Torna-se relevante a condução de estudos clínicos para obtenção de evidências científicas sobre a indicação ou não da higienização da cavidade bucal de bebês edêntulos.


Introduction: The indication of oral hygiene in edentulous babies is still controversial among health professionals, being necessary the search of this recommendation and the standardization of information. Objective: To inves-tigate critically the evidence related to the indication of oral hygiene for edentulous babies. Methods: The search for articles was performed in the PubMed, LILACS and Google Scholar databases, in order to assess the following question: "Can oral cavity hygiene of edentulous babies influence oral microbiota?" A search in 8 books of Pediatric Dentistry was also performed. Results: 317 articles were found (167-PubMed, 146-Google Scholar and 4-LILACS). There were no primary studies that evalu-ated the effect of oral hygiene of edentulous infants on microbiota, which impair the conduction of a systematic review. Thus, it was included for this review six studies that investigated microorganisms in the oral cavity of edentulous infants and the role of salivary immunoglo- bulins. Among the textbooks evaluated, only 4 indicated the oral hygiene in edentulous infants. Conclusion:According to the data, there are no primary studies that assessed the effect of oral hygiene in the oral microbiota of edentulous babies. It is relevant to conduct clinical studies in order to obtain scientific evidence about the indication or no of the oral hygiene in edentulous babies


Subject(s)
Humans , Infant, Newborn , Infant , Oral Hygiene , Mouth, Edentulous , Microbiota
7.
Rev. odontol. UNESP (Online) ; 50: e20210020, 2021. tab, ilus
Article in English | LILACS, BBO | ID: biblio-1347770

ABSTRACT

Introduction: Enamel microabrasion is achieved by abrasion of the enamel surface and it is a quick, practical and efficient procedure. Objective It was assessed the weight loss and surface aspect of enamel after microabrasion procedures with commercial and mixtures made in-office. Material and method Eighty bovine incisors were divided into four groups (n=10): OpalustreTM (6.6% HCl + silicon carbide); Whiteness RMTM (6% HCl + silicon carbide); 37% H3PO4 + pumice and 10% HCl + pumice. Treatment was performed by 15 applications of 10s duration. The enamel weight loss was determined by the difference in weight before and after the microabrasion. The surfaces were analyzed by a surface roughness equipment and scanning electron microscopy. Data were submitted to paired-T test, one-way ANOVA and Tukey tests (α=0.05). Result It was observed significantly weight loss for all groups. The difference in weight loss ranged from 0.037±0.012 for group 37% H3PO4 and from 0.054±0.009 for group 6,6% HCl. There was a significant increase in surface roughness for all groups and 10% HCl group showed the lower results (0.65±0.09). It was observed different patterns of enamel morphology by SEM images. Conclusion The in-office mixtures resulted in the lowest enamel structure loss (37% H3PO4) and the lowest surface roughness (10% HCl).


Introdução: A microabrasão do esmalte é realizada através da abrasão da superfície do mesmo, apresentando-se como um procedimento rápido, prático e eficiente. Objetivo Avaliar a perda de peso e o aspecto superficial do esmalte após procedimentos de microabrasão com agentes comerciais e não comerciais. Material e método Oitenta incisivos bovinos foram divididos em quatro grupos (n = 10): OpalustreTM (6,6% HCl + carboneto de silício); Whiteness RMTM (6% HCl + carboneto de silício); 37% H3PO4 + pedra-pomes e 10% HCl + pedra-pomes. O tratamento foi realizado em 15 aplicações de 10s de duração. A perda de peso do esmalte foi determinada pela diferença de peso antes e depois da microabrasão. As superfícies foram analisadas por equipamento de rugosidade superficial e microscopia eletrônica de varredura. Os dados foram submetidos ao teste T-pareado, ANOVA one-way e teste de Tukey (α = 0,05). Resultado Foi observada perda de peso significativa para todos os grupos, a diferença na perda de peso variou de -0,037±0,012 para o grupo 37% H3PO4 a -0.054±0.009 para o grupo 6.6% HCl. Houve um aumento significativo na rugosidade da superfície para todos os grupos e o grupo 10%HCl apresentou os resultados mais baixos (0,65±0,09). Foram observados diferentes padrões de morfologia do esmalte por meio de imagens MEV. Conclusão Os agentes não comerciais resultaram na menor perda de estrutura do esmalte (37% H3PO4) e na rugosidade superficial (10% HCl).


Subject(s)
Animals , Cattle , Microscopy, Electron, Scanning , Analysis of Variance , Enamel Microabrasion , Dental Enamel , Tooth Wear
8.
J. appl. oral sci ; 29: e20210120, 2021. tab, graf
Article in English | LILACS | ID: biblio-1340104

ABSTRACT

Abstract Objective Our study aims to synthesize, characterize, and determine the effects of a ChNPs suspension on human enamel after cariogenic challenge via pH-cycling. Methodology ChNPs were synthesized by ion gelation and characterized by Transmission Electron Microscopy (TEM) and Dynamic Light Scattering. Forty enamel blocks were divided into four groups (n=10/group): (i) ChNPs suspension; (ii) chitosan solution; (iii) 0.05% sodium fluoride (NaF) solution; and (iv) distilled water. Specimens were exposed to cariogenic challenge by cycling in demineralization solution (3 h) and then remineralized (21h) for 7 days. Before each demineralization cycle, the corresponding solutions were passively applied for 90 s. After 7 days, specimens were examined for surface roughness (Ra) and Knoop hardness (KHN) before and after the cariogenic challenge; % KHN change (variation between initial and final hardness), and surface topography by an optical profilometer. The data were analyzed by repeated-measures ANOVA, One-way ANOVA, and Tukey tests (α=0.05). Results TEM images showed small spherical particles with diameter and zeta potential values of 79.3 nm and +47.9 mV, respectively. After the challenge, all groups showed an increase in Ra and a decrease in KHN values. Optical profilometry indicated that ChNPs- and NaF-treated specimens showed uneven roughness interspersed with smooth areas and the lowest %KHN values. Conclusion The ChNPs suspension was successfully synthesized and minimized human enamel demineralization after a cariogenic challenge, showing an interesting potential for use as an oral formulation for caries prevention.


Subject(s)
Humans , Tooth Demineralization/prevention & control , Chitosan , Nanoparticles , Sodium Fluoride , Cariostatic Agents , Dental Enamel , Hardness
9.
Rev. Fac. Odontol. Porto Alegre ; 61(2): 30-38, jul-dez. 2020.
Article in Portuguese | LILACS, BBO | ID: biblio-1281073

ABSTRACT

Introdução: A técnica de microabrasão pode ser realizada através de pasta pronta para uso, disponível comercialmente, ou o profissional pode manipulá-la no consultório. Objetivo: Verificar o efeito da apresentação comercial do ácido clorídrico a 10% na manipulação de pasta para microabrasão sobre a superfície do esmalte. Metodologia: Foram selecionados incisivos bovinos e divididos em dois grupos, de acordo com a apresentação comercial do ácido clorídrico (líquido ou em gel). O tratamento foi realizado através de dez aplicações com 10s de duração cada, intercaladas por lavagem de 10s. Vinte incisivos (n=10) foram utilizados para se determinar a perda de estrutura do esmalte. Cada amostra foi pesada, em balança analítica, antes e após submissão à microabrasão. Outras 20 amostras (n=10) foram utilizadas para determinação da rugosidade superficial média (Ra) utilizando-se um rugosímetro. Três amostras de cada grupo do experimento anterior foram selecionadas, aleatoriamente, e outras três amostras adicionais foram preparadas como controle (baseline) para análise em MEV. Resultados: Verificou-se diferença estatística significativa entre a massa final e a inicial e rugosidade superficial das amostras, independente da apresentação comercial do ácido. Nas imagens de MEV observou-se presença de superfície regular para o grupo controle (baseline). Nas demais imagens verificou-se superfície com considerável irregularidade e dissolução discreta do esmalte. Conclusões: O tratamento realizado causou perda significativa de estrutura e aumentou a rugosidade superficial dos espécimes, independente da apresentação comercial do ácido e sem apresentar diferença entre os grupos ao final. A apresentação comercial do ácido não parece ser um fator a interferir no tratamento. (AU)


Introduction: The microabrasion technique can be performed using a commercially available paste, or the dentist can prepare it in his office. Objective: To verify the effect of hydrochloric acid commercial presentation in the handling of microabrasion paste on the enamel surface. Methodology: Bovine incisors were divided into two groups, according to the commercial presentation of 10% hydrochloric acid (liquid or gel). The treatment was carried out through ten applications of 10 s duration each, intercalated with a 10s wash. Twenty teeth (n=10) were used to determine the loss of enamel structure. Each sample was weighed on an analytical balance before and after submission to microabrasion. Another 20 teeth (n=10) were used to determine the average surface roughness (Ra) using a rugosimeter. Three samples from each group of the previous experiment were selected, randomly, and another three additional samples were repared as a control (baseline) for SEM analysis. Results: There was a statistically significant difference between the final and initial mass and the surface roughness of the samples, regardless of the acid commercial presentation. In the SEM images, a regular surface was observed for the control group (baseline). In the other images, there was a surface with considerable irregularity and a slight dissolution of the enamel. Conclusions: The treatment carried out. (AU)


Subject(s)
Animals , Cattle , Enamel Microabrasion , Dental Enamel/drug effects , Hydrochloric Acid/therapeutic use , Hydrochloric Acid/pharmacology , Materials Testing , Microscopy, Electron, Scanning , Gravimetry , Incisor
10.
J. Health Biol. Sci. (Online) ; 8(1): 1-6, 01/01/2020. ilus
Article in English | LILACS | ID: biblio-1103713

ABSTRACT

Objectives: This study aimed to compare the efficiency of three different substances used for the bleaching of non-vital teeth. Methods: Forty bovine teeth were divided into five groups: three test groups (sodium perborate + 20% hydrogen peroxide ­ SPG; 37% carbamide peroxide ­ CPG; 35% hydrogen peroxide ­ HPG) and two control groups (CG1 and CG2). Teeth of the test groups were stained artificially with blood and bleached using the in-office and walking bleach techniques. The efficiency of the bleaching agents was evaluated objectively by comparing the color variables L*, a*, and b* measured spectrophotometrically according to the CIELab system. The data were analyzed by ANOVA and the Tukey test, adopting a 5% level of significance. Results: The results showed a reduction in lightness (L*) after staining and an increase after the bleaching sessions. The values of a* and b* increased after staining and decreased after the application of the bleaching substances. Conclusions: All substances used for non-vital tooth bleaching exhibited the same bleaching efficiency. No significant differences in this efficiency were observed between the bleaching techniques at the end of the experiment. However, in-office bleaching provided the same bleaching result as the walking bleach technique within a shorter period. Clinical significance: Given the increasing demand for esthetics, the use of different bleaching techniques and the variety of whitening agents, oral health professionals should offer evidence-based treatment, more efficient and in less time.


Objetivos: este estudo teve como objetivo comparar a eficiência de três substâncias diferentes utilizadas no clareamento de dentes não vitais. Métodos: quarenta dentes bovinos foram divididos em cinco grupos: três grupos-teste (perborato de sódio + 20% de peróxido de hidrogênio - PS; 37% de peróxido de carbamida - PC; 35% de peróxido de hidrogênio - PH) e dois grupos-controle (CG1 e CG2). Os dentes dos grupos-teste foram pigmentados artificialmente com sangue e clareados usando as técnicas de branqueamento em consultório e walking-bleach. A eficiência dos agentes clareadores foi avaliada objetivamente, comparando-se as variáveis de cor L*, a* e b* medidas espectrofotometricamente de acordo com o sistema CIELab. Os dados foram analisados por ANOVA e teste de Tukey, adotando nível de significância de 5%. Resultados: os resultados mostraram uma redução da luminosidade (L*) após a pigmentação e um aumento após as sessões de clareamento. Os valores de a* e b* aumentaram após a pigmentação e diminuíram após a aplicação das substâncias clareadoras. Conclusões: todas as substâncias utilizadas no clareamento de dente não-vital apresentaram a mesma eficiência. Não foram observadas diferenças significativas nesta eficiência entre as técnicas de branqueamento no final do experimento. No entanto, o branqueamento em consultório forneceu o mesmo resultado de clareamento que a técnica walking-bleach em um período mais curto. Significado clínico: Dada a crescente demanda por estética, o uso de diferentes técnicas de clareamento e a variedade de agentes clareadores, os profissionais de saúde bucal devem oferecer tratamento baseado em evidências, mais eficiente e em menos tempo.


Subject(s)
Tooth Bleaching , Hydrogen Peroxide
11.
Article in English | LILACS, BBO | ID: biblio-1135499

ABSTRACT

Abstract Objective: To evaluate the effect of immersion and acid challenge with cola drink on color change (ΔE), Vickers hardness (VHN) and surface roughness (Ra) of artificial acrylic resin teeth. Material and Methods: The artificial teeth were divided into 6 groups (n= 8): TC (Trilux/Control), BC (Biotone/Control), TAC (Trilux/Acid challenge), BAC (Biotone/Acid challenge), TI (Trilux/Immersion) and BI (Biotone/Immersion). The teeth were embedded in acrylic resin and the labial side was serially polished to provide appropriate flat surface. The samples of TC, BC, TI, BI groups were immersed in artificial saliva and cola drink (coke) for 7 days, respectively. The acid challenge was performed with immersion of samples in coke for 5 min, and subsequently immersion in artificial saliva for 2h. This cycle was repeated at 4 times/day, during 7 days. The tests of VHN, ΔE and Ra were analyzed before and after the challenge and immersion groups. Data was analyzed by ANOVA, Tukey and T test (α = 0.05). Results: There was no difference in Ra values between groups after treatments. However, there was a decrease in VHN for all groups. BI (19.2 ± 0.3) presented significantly lower hardness than BAC (19.5 ± 0.9) and BC (20.2 ± 0.5). Groups BI (2.18 ± 0.41) and TI (1.50 ± 0.43) had statistically higher ΔE compared to the other groups. Conclusion: The hardness of resin teeth decreased after acid challenges, but the roughness surface was not affected. The color was more affected by the times of exposure in cola beverage and remineralization in artificial saliva, which were associated to the material degradation (AU).


Subject(s)
Tooth, Artificial , Acrylic Resins/chemistry , In Vitro Techniques/methods , Dental Prosthesis , Beverages , Brazil , Analysis of Variance , Cola/chemistry , Hardness Tests/instrumentation
12.
J. Health Biol. Sci. (Online) ; 7(2): 172-176, abr.-jun. 2019.
Article in Portuguese | LILACS | ID: biblio-1005733

ABSTRACT

Introdução: o diagnóstico de fratura radicular é difícil, pois não há sinais/sintomas clínicos e características radiográficas patognomônicas, podendo ser confundido com um insucesso no tratamento endodôntico e até mesmo com doença periodontal. Objetivo: descrever as características clínicas, radiográficas e tomográficas em dentes com suspeita de fratura radicular. Métodos: a amostra foi composta por seis indivíduos cujos dados clínicos foram coletados, realizados testes de percussão vertical e horizontal, verificando se o dente apresentava mobilidade dentária e bolsa periodontal. Achados radiográficos e tomográficos foram avaliados em relação à presença de fratura radicular e de lesão periapical e/ou perda óssea associada ao terço apical/lateral da raiz para se obter o diagnóstico complementar da fratura radicular. Resultados: os achados clínicos mais prevalentes foram percussões vertical e horizontal positivos seguidos de dor e mobilidade. Os exames por imagem evidenciaram que todos os casos de suspeita de fratura radicular estavam relacionados a dentes com pino metálico. Em apenas um caso, não foi possível visualizar a lesão periapical e/ou perda óssea e a fratura na radiografia periapical, sendo detectadas nas imagens tomográficas. Conclusões: os achados clínicos de suspeita de fraturas radiculares são muito variáveis, necessitando correlacioná-los com exames de imagem. A TCFC se mostrou mais eficaz que a radiografia periapical na detecção da linha de fratura, porém esses dois exames podem ser utilizados para complementar o exame clínico e alcançar um diagnóstico mais acurado..


Introduction: the diagnosis of dental fracture is usually difficult because there are no pathognomonic clinical signs/symptoms and radiographic characteristics, and may be mistaken for failure of endodontic treatment and even periodontal disease. Purpose: to describe clinical, radiographic and tomographic characteristics in teeth with suspected root fracture. Methods: the sample consisted of 06 individuals and their clinical data were collected. Vertical and horizontal percussion tests were performed, verifying tooth mobility and periodontal pocket. In relation to radiographic and tomographic findings, the presence of root fracture and periapical lesion and/or bone loss associated with the apical/lateral third of the root were evaluated in order to obtain the diagnosis of root fracture. Results: the most prevalent clinical findings were positive vertical and horizontal percussions followed by pain and mobility. Imaging tests showed that all cases of suspected root fracture were related to teeth with metallic post. In only one case, it was not possible to visualize the periapical lesion and/or bone loss and fracture in the periapical radiography, being detected in tomographic images. It`s possible to conclude with the analysis of some clinical cases that cone-beam computed tomography favors accuracy and precision regarding the visualization, location and extension of root fracture, as well as periapical alterations. Conclusions: the clinical findings of suspected root fractures are very variable, requiring to correlate them with imaging exams. The CBCT was more effective than the periapical radiography in the detection of the fracture line, but these two exams can be used to complement the clinical examination and reach a more accurate diagnosis.


Subject(s)
Radiography, Dental , Endodontics , Cone-Beam Computed Tomography
13.
HU rev ; 45(1): 65-75, 2019.
Article in Portuguese | LILACS | ID: biblio-1048520

ABSTRACT

Introdução: A erosão dentária é caracterizada por uma perda progressiva e irreversível dos tecidos dentários mineralizados que ocorre sem envolvimento bacteriano. Acredita-se que o uso frequente de medicamentos líquidos orais, em crianças, possa desenvolver erosão dentária visto que esses medicamentos apresentam, em sua maioria, pH ácido, que pode atuar como fator predisponente ao desenvolvimento da erosão dentária. Objetivo: O presente estudo avaliou os efeitos do uso de medicamentos líquidos orais na estrutura de dentes decíduos por meio de revisão sistemática da literatura. Material e Métodos: Foi realizada pesquisa de artigos científicos, em março de 2018, nas bases de dados PubMed e Web of Science utilizando descritores específicos para a pesquisa, de modo a avaliar, descritivamente, a seguinte pergunta "Os medicamentos infantis de uso contínuo podem causar erosão na superfície de dentes decíduos?" Foram encontrados 278 artigos na base de dados Pubmed e 41 na base Web of Science, dos quais 18 artigos eram coincidentes, assim 301 títulos e resumos foram lidos e analisados. Destes, 293 foram excluídos de modo que 8 artigos foram selecionados para análise crítica. Resultados: Os medicamentos líquidos de uso contínuo, geralmente utilizados para o tratamento de condições crônicas em crianças, promovem efeito erosivo sobre a estrutura dentária, principalmente quando relacionado ao pH e acidez titulável dos medicamentos, por avaliação de estudos conduzidos "in vitro". Conclusão: Torna-se necessária a realização de estudos clínicos para avaliação mais adequada do efeito erosivo de medicamentos infantis na superfície de dentes decíduos.


Introduction: Dental erosion is characterized by a progressive and irreversible loss of mineralized dental tissues that occurs without bacterial involvement. It is believed that the frequent use of oral liquid medicines in children can develop dental erosion since the majority of these medications has acidic pH, which can act as a predisposing factor for dental erosion development. Objective: The present study evaluated the effects of the use of liquid oral medications on the structure of deciduous teeth by a systematic review of literature. Material and Methods: We conducted a survey of scientific articles in PubMed and Web of Science databases on March 2018, using specific descriptors for the research, in order to evaluate descriptively the following question: "Children's medicines for continuous use may cause erosion on the surface of deciduous teeth?". We found 278 articles in the PubMed database and 41 in the Web of Science database, of which 18 articles were matched, so 301 titles and abstracts were read and analyzed. Of these, 293 were excluded. Thus, 8 articles were selected for the critical analysis. Results: Liquid medications of continuous use, generally used for the treatment of chronic conditions in children, promoted erosive effect on dental structure, especially when related to pH and titratable acidity of the drugs in in vitro studies. Conclusion:It is necessary to carry out clinical studies for a more adequate evaluation of the erosive effect of children's medicines on the surface of deciduous teeth.


Subject(s)
Humans , Male , Female , Child, Preschool , Child , Tooth, Deciduous , Tooth Erosion , Pharmaceutical Preparations , Child , Administration, Oral , Tooth Demineralization , Dental Care for Children , Drug Utilization
14.
J. appl. oral sci ; 26: e20170222, 2018. tab, graf
Article in English | LILACS, BBO | ID: biblio-893701

ABSTRACT

Abstract The effect of fluoride agents on the retention of orthodontic brackets to enamel under erosive challenge is little investigated. Objective: The aim of this study was to evaluate the effect of titanium tetrafluoride (TiF4) and sodium fluoride (NaF) agents on the shear bond strength of brackets to enamel and on the enamel microhardness around brackets under erosive challenge. Methods: Brackets were bonded to bovine incisors. Five groups were formed according to fluoride application (n=10): TiF4 varnish, TiF4 solution, NaF varnish, NaF solution and control (without application). The specimens were submitted to erosive challenge (90 s cola drink/2h artificial saliva, 4x per day for 7 days). Solutions were applied before each erosive cycle and varnishes were applied once. Vickers Microhardness (VHN) was obtained before and after all cycles of erosion and the percentage of microhardness loss was calculated. Shear bond strength, adhesive remnant index and polarized light microscopy were conducted after erosion. The data were analyzed by ANOVA, Tukey, Kruskal-Wallis and Mann-Whitney U tests (α=0.05). Results: The %VHN had no statistically significant differences among the experimental groups. However, considering the comparisons of all groups with the control group, TiF4 varnish showed the highest protection from enamel demineralization (effect size of 2.94, while the effect size for the other groups was >2.4). The TiF4 varnish group had significantly higher shear bond strength compared to other groups. There was no difference among groups for adhesive remnant index. Polarized light microscopy showed higher demineralization depth for the control group. Conclusions: Application of NaF and TiF4 agents during mild erosive challenge minimized the enamel mineral loss around brackets, however only the experimental TiF4 varnish was able to prevent the reduction of shear bond strength of brackets to enamel.


Subject(s)
Animals , Cattle , Sodium Fluoride/chemistry , Titanium/chemistry , Tooth Erosion/prevention & control , Cariostatic Agents/chemistry , Dental Bonding/methods , Orthodontic Brackets , Dental Enamel/drug effects , Fluorides/chemistry , Reference Values , Saliva, Artificial/chemistry , Surface Properties , Materials Testing , Reproducibility of Results , Analysis of Variance , Tooth Demineralization/prevention & control , Statistics, Nonparametric , Dental Enamel/chemistry , Shear Strength , Hardness Tests , Microscopy, Polarization
15.
Braz. dent. j ; 28(1): 16-23, Jan.-Feb. 2017. tab, graf
Article in English | LILACS | ID: biblio-839124

ABSTRACT

Abstract The aim of this study was to evaluate the μTBS in different dentin substrates and water-storage periods. Twenty-four dentin blocks obtained from sound third molars were randomly divided into 3 groups: Sound dentin (Sd), Caries-affected dentin (Ca) and Caries-infected dentin (Ci). Dentin blocks from Ca and Ci groups were subjected to artificial caries development (S. mutans biofilm). The softest carious tissue was removed using spherical drills under visual inspection with Caries Detector solution (Ca group). It was considered as Ci (softer and deeply red stained dentin) and Ca (harder and slightly red stained dentin). The Adper Single Bond 2 adhesive system was applied and Z350 composite blocks were built in all groups. Teeth were stored in deionized water for 24 h at 37 ºC and sectioned into beams (1.0 mm2 section area). The beams from each tooth were randomly divided into three storages periods: 24 h, 6 months or 1 year. Specimens were submitted to µTBS using EZ test machine at a crosshead speed of 1.0 mm/min. Failure mode was examined by SEM. Data from µTBS were submitted to split plot two-way ANOVA and Tukey’s HSD tests (a=0.05). The µTBS (MPa) of Sd (41.2) was significantly higher than Ca (32.4) and Ci (27.2), regardless of storage. Ca and Ci after 6 months and 1 year, presented similar µTBS. Mixed and adhesive failures predominated in all groups. The highest µTBS values (48.1±9.1) were found for Sd at 24 h storage. Storage of specimens decreased the µTBS values for all conditions.


Resumo O objetivo neste estudo foi avaliar a resistência de união à microtração (RUµT) de um sistema adesivo convencional (Adper Single Bond 2 - SB) em diferentes substratos dentinários e períodos de armazenagem. Vinte e quatro blocos de dentina foram obtidos de terceiros molares hígidos e separados aleatoriamente em 3 grupos (n=8): dentina sadia (Ds), dentina afetada (Da) e dentina infectada (Di). A Da e a Di foram submetidas ao desenvolvimento biológico artificial de cárie (S. mutans). O tecido cariado amolecido foi removido usando broca esférica sob inspeção visual com a solução Caries Detector (grupo Da). Considerou-se como Di a dentina amolecida e fortemente pigmentada de vermelho e como Da, a dentina hígida e levemente pigmentada de vermelho. O sistema adesivo SB foi aplicado de acordo com as recomendações do fabricante e blocos da resina composta Z350 foram construídos (6 mm de altura). O conjunto (dente/bloco de resina) foi armazenado em água deionizada por 24 horas a 37 °C. Estes foram seccionados em palitos (1,0 mm2 de área), que foram separados aleatoriamente em 3 períodos de armazenagem: 24 horas, 6 meses e 1 ano. Os palitos foram submetidos ao ensaio de resistência de união à microtração na máquina EZ teste a uma velocidade de 1,0 mm/min. Dados de RUµT foram submetidos à Análise de Variância 2 fatores em esquema de parcela subdividida e ao teste de Tukey (a=0,05). Os valores de resistência (MPa) da Ds (41,2) foram significativamente maiores do que os da Da (32,4) e Di (27,2), independente do tempo de armazenagem. Di e Da, 6 meses e 1ano, apresentaram valores similares de resistência de união. As falhas adesivas e mistas foram predominantes para todos os grupos. Em conclusão, os maiores valores de RUµT (48,1±9,1) foram verificados para a Ds e 24 h de armazenagem. A armazenagem diminuiu os valores de RUµT para todas as condições.


Subject(s)
Dentin-Bonding Agents , Dental Caries , Dentin , Tensile Strength , In Vitro Techniques , Microscopy, Electron, Scanning , Healthcare Failure Mode and Effect Analysis , Molar, Third
16.
Rev. odontol. UNESP (Online) ; 45(5): 253-257, Sept.-Oct. 2016. tab
Article in English | LILACS, BBO | ID: lil-798169

ABSTRACT

Introduction: Methods of decontamination or sanitization of toothbrushes have been questioned. Objective: This study assessed the effectiveness of pomegranate peels infusion as a disinfectant of toothbrushes against Streptococcus mutans. Material and method: A sample of 16 schoolchildren aged between 7 and 9 years performed brushing 5 days/week, with a careful brushing once a day. After each day of brushing, the toothbrushes were washed and sprayed with one disinfectant solution. This procedure was repeated for 4 weeks using one of the different solutions per week: distilled water (G1; negative control), pomegranate (Punica granatum Linn) peels infusion (G2), 1% sodium hypochlorite (G3) and 0.12% chlorhexidine digluconate (G4). After the fifth day, toothbrushes were collected for laboratory analysis. Toothbrushes heads were subjected to agitation in saline dilution of 10–1, 10–2,10–3, and 25 μL of each dilution were seeded in mitis salivarius agar culture medium for S. mutans colony-forming unit (CFU) counting. One calibrated examiner (Kappa = 0.91) performed the CFU (mL–1 × 104) counts. Kruskal-Wallis and Dunn Multiple Comparison tests were used at a significance level of 5%. Result: G1 presented the highest number of CFU (3.9 ± 8.4), followed by G2 (3.2 ± 4.0). No S. mutans growth was observed in G3 and G4. There was no statistically significant difference between G1 and G2 and between G3 and G4 (p>0.05). Conclusion: Pomegranate infusion was completely ineffective for the disinfection of toothbrushes against S. mutans when compared with 1% sodium hypochlorite and 0.12% chlorhexidine digluconate solutions.


Introdução: Os métodos de descontaminação ou desinfecção de escovas dentais têm sido questionados. Objetivo: Este estudo avaliou a eficácia da infusão de cascas de romã como um desinfetante de escovas dentais contra Streptococcus mutans. Material e método: Uma amostra de 16 escolares com idade entre 7 e 9 anos realizou escovação dentária cuidadosa, uma vez ao dia por 5 dias/semana durante 4 semanas. Após cada dia de escovação, as escovas foram lavadas e pulverizadas com uma solução desinfetante. Este procedimento foi repetido por 4 semanas utilizando uma das diferentes soluções por semana: água destilada (G1; grupo controle), infusão de casca de romã (Punica granatum Linn) (G2), hipoclorito de sódio a 1% (G3) e digluconato de clorexidina a 0,12% (G4). Após o quinto dia, as escovas foram coletadas para análise laboratorial. As cabeças das escovas foram agitadas em solução salina diluída em 10–1, 10–2,10–3, e 25μL de cada diluição foi semeada em meio de cultura agar mitis salivarius para contagem de unidade formadora de colônias (UFC) de S. mutans. Um examinador calibrado (Kappa = 0,91) realizou a contagem de UFC mL–1 × 104. Os testes de Kruskal-Wallis e de Comparações Múltiplas de Dunn foram usados em um nível de significância de 5%. Resultado: G1 apresentou o maior número de UFC (3,9 ± 8,4), seguido de G2 (3,2 ± 4,0). Não foi observado crescimento de S. mutans em G3 e G4. Não houve diferença estatisticamente significante entre G1 e G2 e entre G3 e G4 (p>0,05). Conclusão: A infusão de romã foi completamente ineficaz para a desinfecção de escovas dentais contra S. mutans quando comparada às soluções de hipoclorito de sódio a 1% e digluconato de clorexidina a 0,12%.


Subject(s)
Child , Streptococcus mutans , Toothbrushing , Child , Disinfection , Statistics, Nonparametric , Pomegranate , Sodium Hypochlorite , Distilled Water , Chlorhexidine , Saline Solution
17.
Rev. odontol. UNESP (Online) ; 45(2): 103-109, mar.-abr. 2016. tab, ilus
Article in English | LILACS, BBO | ID: lil-780064

ABSTRACT

Introduction: Few studies investigated the surface properties of luting cements after erosive challenge. Objective: To evaluate the surface roughness (Ra), Vickers hardness (VHN) and morphology of 4 luting cements after erosive challenge. Material and method: Twenty specimens of each cement were prepared (4×2mm) and divided into experimental (erosive challenge) and control (artificial saliva) groups (n=10): Rely X U200 (U200); Rely X ARC (ARC); Ketac Cem Easy Mix (Ketac) and Zinc phosphate (ZnP). The erosive challenge was performed by four daily erosive cycles (90s) in a cola drink and 2 h in artificial saliva over 7 days. Ra and VHN readings were performed before and after erosion. The percentage of hardness loss (%VHN) was obtained after erosion. The surface morphology was analyzed by scanning electron microscopy (SEM). ANOVA, Tukey and Student-T tests were used (α=0.05). Result: After erosion, all luting cements had increase in Ra values and U200 and ZnP groups had the highest %VHN. After saliva immersion, only U200 and ZnP groups had significant increases in Ra values and there were no significant differences among the groups in %VHN. SEM analysis showed that Ketac and ZnP groups had rough and porous surfaces, and U200 group had higher resin matrix degradation than ARC group. Conclusion: Erosive challenge with a cola drink affected the surface properties of all luting cements.


Introdução: Poucos estudos investigaram as propriedades de superfície de cimentos após desafio erosivo. Objetivo: Avaliar a rugosidade da superfície (Ra), dureza Vickers (VHN) e morfologia de superfície de 4 cimentos após desafio erosivo. Material e método: Vinte amostras de cada cimento foram preparadas (4×2mm) e divididas em grupo experimental (desafio erosivo) e controle (saliva artificial) (n=10): Rely X U200 (U200); Rely X ARC (ARC); Ketac Cem Easy Mix (Ketac) e Fosfato de Zinco (ZnP). O desafio erosivo foi realizado com quatro ciclos erosivos diárias (90s) em bebida à base de cola e 2h em saliva artificial durante 7 dias. As leituras de Ra e VHN foram realizadas antes e após erosão. A porcentagem de perda de dureza (%VHN) foi obtida depois da erosão. A morfologia de superfície foi analisada por microscopia eletrônica de varredura (MEV). Foram utilizados testes de ANOVA, Tukey e T-Student (α=0,05). Resultado: Após a erosão, foi observado aumento dos valores de Ra em todos os cimentos testados, e os grupos U200 e ZNP tiveram a maior %VHN. Após imersão em saliva, apenas os grupos U200 e ZnP tiveram aumento significativo nos valores de Ra e não houve diferenças significativas entre os grupos quanto à %VHN. A análise em MEV mostrou que os grupos Ketac e ZNP apresentaram superfícies rugosas e porosas, e o grupo U200 apresentou maior degradação da matriz comparado ao grupo ARC. Conclusão: O desafio erosivo com bebida a base de cola afetou as propriedades de superfície de todos os cimentos.


Subject(s)
Tooth Erosion , Microscopy, Electron, Scanning , Analysis of Variance , Resin Cements , Glass Ionomer Cements , Hardness Tests , Saliva, Artificial , Surface Properties , Beverages
18.
Pesqui. bras. odontopediatria clín. integr ; 16(1): 43-50, jan.-dez. 2016. tab
Article in English | LILACS, BBO | ID: biblio-911081

ABSTRACT

Objective: To evaluate in vitro the effect of erosive challenge and continuous immersion in cola drink on surface microhardness of orthodontic composites. Material and Methods: Forty samples of three composites (Transbond XT, Quick Cure and Ortho Cem) were prepared (4 x 2 mm) and distributed into 4 groups (n=10): erosive challenge, artificial saliva immersion (control 1), continuous cola immersion and artificial saliva immersion (control 2). Erosive challenge was performed 4 times per day (5 min) in cola drink for 2 h in artificial saliva for 7 days. Samples of continuous cola immersion group were soaked in cola drink for 5 weeks and the beverage was renewed every two days. Control samples were immersed in artificial saliva for 7 days (control 1) and 5 weeks (control 2). Vickers microhardness (VHN) measurements were performed before and after erosive challenge and continuous immersion. Data were evaluated by paired Student's T-test, ANOVA one-way and Tukey tests (α = 0.05). Results: After 7 days of erosive challenge, there was no statistical difference between VHN values before and after erosive challenge and artificial saliva immersion. However, after 5 weeks of cola drink and artificial saliva immersion, significant reduction in VHN values was observed for all composites when compared to baseline values, and specimens immersed in cola drink showed lower VHN compared to those immersed in saliva, regardless of composite composition. Conclusion: After 7 days of erosive challenge, there was no alteration in superficial VHN of orthodontic composites. However, after 5 weeks of immersion in cola drink, significant reduction of VHN values was observed for all composites.


Subject(s)
Composite Resins , In Vitro Techniques/methods , Orthodontic Appliances , Tooth Erosion/chemically induced , Analysis of Variance , Brazil , Hardness Tests/methods
20.
Braz. oral res. (Online) ; 30(1): e75, 2016. tab, graf
Article in English | LILACS | ID: biblio-951976

ABSTRACT

Abstract The layer formed by fluoride compounds on tooth surface is important to protect the underlying enamel from erosion. However, there is no investigation into the properties of protective layer formed by NaF and TiF4 varnishes on eroded enamel. This study aimed to evaluate the thickness, topography, nanohardness, and elastic modulus of the protective layer formed by NaF and TiF4 varnishes on enamel after erosion using nanoindentation and atomic force microscopy (AFM). Human enamel specimens were sorted into control, NaF, and TiF4 varnish groups (n = 10). The initial nanohardness and elastic modulus values were obtained and varnishes were applied to the enamel and submitted to erosive challenge (10 cycles: 5 s cola drink/5 s artificial saliva). Thereafter, nanohardness and elastic modulus were measured. Both topography and thickness were evaluated by AFM. The data were subjected to ANOVA, Tukey's test and Student's t test (α = 0.05). After erosion, TiF4 showed a thicker protective layer compared to the NaF group and nanohardness and elastic modulus values were significantly lower than those of the control group. It was not possible to measure nanohardness and elastic modulus in the NaF group due to the thin protective layer formed. AFM showed globular deposits, which completely covered the eroded surface in the TiF4 group. After erosive challenge, the protective layer formed by TiF4 varnish showed significant properties and it was thicker than the layer formed by NaF varnish.


Subject(s)
Humans , Sodium Fluoride/chemistry , Titanium/chemistry , Tooth Erosion/prevention & control , Cariostatic Agents/chemistry , Dental Enamel/drug effects , Fluorides/chemistry , Reference Values , Saliva, Artificial/chemistry , Surface Properties , Time Factors , Materials Testing , Carbonated Beverages , Reproducibility of Results , Analysis of Variance , Statistics, Nonparametric , Microscopy, Atomic Force , Elastic Modulus , Hardness Tests
SELECTION OF CITATIONS
SEARCH DETAIL