Finite element analysis on stress concentration improvement in patellofemoral joint by releasing lateral patellar retinaculum with stiletto needle based on the theory of Jinshugu() / 中国骨伤

OBJECTIVE@#To study mechanism of improvement of stress concentration on patellofemoral joint by stiletto needle releasing lateral patellar retinaculum guided by the theory of Jinshugu() and based on the finite element model of knee joint. and to elucidate the biomechanical mechanism of stiletto needle releasing changing patellar trajectory and reducing patellofemoral joint pressure.@*METHODS@#CT data of knee joint from a normal male (aged 29, heighted 171 cm, weighted 58 kg) was selected. Starting with construction of three-dimensional model of knee joint by using finite element software, the finite element model of knee joint with complete tendonand bone structures were established through several steps, such as geometric reconstruction, reverse engineering, meshing, material assignment and loading analysis. The loading condition was set as 500 N load on knee joint, and the average tensile stress of quadriceps femoris tendon was about 200 N. To simulate the release of lateral patellar retinaculum by stiletto needle at 30 and 90 position of knee flexion in finite element model separately, and to compare the improvement of stress concentration of patellofemoral joint by stiletto needle intervention under different knee flexion conditions.@*RESULTS@#The peak stress of patellofemoral joint and tibiofemoral joint decreased after stiletto needle releasing of patellofemoral lateral retinaculum compared with before intervention, which was(1) knee flexion at 30 degrees:patellar cartilage decreased by 0.498 MPa (decreased 9.06%), femoral trochlea decreased by 0.886 MPa(decreased 16.27%);(2) knee flexion at 90 degrees:patellar cartilage decreased by 0.558 MPa (decreased 8.6%), femoral trochlea decreasedby 0.607 MPa (decreased 9.94%).@*CONCLUSION@#Releasing lateral patellofemoral retinaculum with stiletto needle could effectively alleviate the stress concentration of patellofemoral joint and reduce local stress peak value, which it is helpful to improve patellar trajectory and make stress distribution more uniform.

Construction and simulation mechanical analysis of dynamic knee joint finite element model based on CT image / 中国骨伤

OBJECTIVE@#To construct a dynamic knee joint finite element model based on CT image data and verify the validity of the model. To provide a simulation model and basic data for biomechanical research of the knee joint by further finite element analysis.@*METHODS@#The CT data of a healthy male knee joint was selected. With the help of Mimics 19.0 and Hypermesh 12.0 software, a high simulation finite element model of knee joint was established following steps, including geometric reconstruction, reverse engineering, meshing and material characterization. The dynamic knee flexion model was generated by determining the boundary conditions and torque loading, and the validity of themodel was confirmed. The biomechanical changes of the tibiofemoral and patellofemoral joints under different knee flexion angles were analyzed by applying the loads (500 N) to the finite element model during knee flexion.@*RESULTS@#A finite element model of knee joint was established based on CT images and anatomical characteristics. The model included three-dimensional elements such as bone, ligament, cartilage, meniscus and patellar retinaculum. The different finite element models of knee flexion states were produced by applying different torques after establishing boundary conditions. According to equivalent conditions (knee flexion 30 degrees, quadriceps tendon under 200 N stretch), the peak stress value of patella was 2.209 MPa and the average Mises stress was 1.132 MPa; the peak stress value of femoral trochlear was 1.405 MPa and the average Mises stress was 0.936 MPa. The validity of the model was proved by the difference between the model and previous studies of 1% to 13.5%. Dynamic model loading showed that the Mises stressof tibiofemoral joint decreased with the increase of knee flexion angle, while the Mises stress of patellofemoral joint was positively correlated with knee flexion angle. The Mises stress of cartilage stress planes at different knee flexion angles was significantly different(<0.05).@*CONCLUSION@#The finite element model established in this study is more comprehensive and can effectively simulate the biomechanical characteristics of dynamic knee joint, which provides support for further simulation mechanics researches of the knee joint.