ABSTRACT
AIM: To compare the differences and correlations between different types of anisometropia, binocular visual acuity and biological parameters in school-age children.METHODS: A total of 128 school-age children(6-12 years)with mild-to-moderate anisometropia were retrospectively analyzed. Subjects were divided into five groups according to anisometropia type. All participants underwent cycloplegic refraction, A-scan ultrasound biometry, and corneal topography. Refractive status, best-corrected visual acuity(BCVA), anterior chamber depth(ACD), lens thickness(LT), vitreous chamber depth(VCD), axial length(AL), corneal radius(CR), and ratio of AL and CR(AL/CR)were recorded. Kruskal-Wallis and Spearman rank correlation tests were then used for statistical analysis.RESULTS: Hyperopic anisometropia had the greatest binocular vision difference(0.14±0.20). Myopic anisometropia had the greatest asymmetry in AL and VCD(0.56±0.41 and 0.56±0.39 mm, respectively). Anisometropia was positively correlated with BCVA, VCD, AL, and AL/CR(r=0.266, 0.379, 0.350, 0.263, respectively; P<0.05), and it was not significantly correlated with LT and CR(r=-0.019,-0.069, respectively; P>0.05), while no parameters had a statistically significant correlation with anisometropia in each group.CONCLUSION: School-age children with hyperopic anisometropia showed the greatest difference of binocular acuity in the four types of anisometropia. The inter-ocular differences of biometric parameters in simple hyperopic or myopic anisometropia were mainly attributed to the asymmetry of VCD and AL, while the differences in ocular parameters were not statistically significant in school-age children with astigmatic anisometropia.
ABSTRACT
With the growing demand of personalized medicine for children, it is especially important to develop medicines for children. In this study, using metoprolol tartrate as model drug, we developed 3D printed chewable tablets suitable for children with automated dosage distribution using semi-solid extruded (SSE) 3D printing technology. Based on the quality by design concept, this study prepared a semi-solid material with good printability using gelatin as the substrate, constructed 3D models and printed tablets with the aid of computer-aided design. The printing parameters were optimized and determined as follows: print temperature of 35-37 ℃, print speed of 25 mm·s-1, fill rate of 15%, and number of outer profile layers of 2. Subsequently, the printing process and the quality uniformity of the tablets were verified, and a linear relationship between the dose and the number of model layers was obtained. Finally, 3D printed chewable tablets were superior in terms of appearance, dose accuracy and compliance compared with traditional split-dose commercially available tablets. In this study, 3D printed metoprolol tartrate chewable tablets with good performance were successfully prepared to address the personalized medication needs of pediatric patients.
ABSTRACT
The development of printing ink is a challenge for binder jetting 3D printed preparations, which directly determines the quality of the printed product. This study adopted a 23 full-factor Design of Experiment (DoE) with three central points to optimize the printing ink composition of levetiracetam 3D printed dispersible tablet based on the concept of Quality by Design. Firstly, using polyvinyl pyrrolidone K30, glycerin and polysorbate 20 as independent variables based on 40% (v/v) isopropanol aqueous solution, and weight variation, hardness, friability and dispersion uniformity of the printed tablets were used as dependent variables. Then obtained the design space of the printing ink prescription by DoE model analysis, and the response optimizer was used to obtain the optimal printing ink prescription: isopropanol aqueous solution containing 0.1% (w/w) polyvinyl pyrrolidone K30 and 4.0% (w/w) glycerin. The jetting mechanism and wettability of the printing ink were analyzed, and different strengths of personalized 3D printed tablets were prepared and characterized, which verified the rationality of the printing ink formulation. This study provided a reference for the development of printing ink for binder jetting 3D printed preparations.
ABSTRACT
@#AIM:To measure and analyze the relationship between ocular biometric parameters and refractive status in hyperopia preschool children.<p>METHODS: Two hundred and three cases(405 eyes)of hyperopia were included in this study, who were diagnosed in Northwest Women and Children Hospital from January 2016 to December 2018.According to different mean spherical equivalent(SE)diopter, the children were divided into mild hyperopia, moderate hyperopia and high hyperopia groups though the retinoscopy after cycloplegia. Anterior chamber depth(ACD), lens thickness(LT), vitreous depth(VITR)and axial length(AL)were measured by A-scan. The value of K1, K2 were got by computer refractor. And analyze the relationship between ocular biometric parameters and refractive. <p>RESULTS: The mean anterior chamber depth for hyperopia preschool children was 3.08±0.38mm, the lens thickness was 3.91±0.34mm, the vitreous depth was 14.53±1.85mm, the axial length was 21.45±1.01mm and the average cornea K was 43.34±1.70D; There were statistically significant differences in AL and VITR among the three hyperopia groups(<i>P</i><0.05). There were statistically significant difference in LT between low hyperopia and moderate hyperopia, moderate hyperopia and high hyperopia(<i>P</i><0.05). There were statistically significant difference in ACD between low hyperopia and moderate hyperopia(<i>P</i><0.05). No difference in K was found across the three groups(<i>P</i>>0.05); SE was negatively correlated with AL and ACD(<i>P</i><0.01), but had no correlation with ACD, LT and K(<i>P</i> >0.05).<p>CONCLUSION: The change of AL plays an important role affecting the refractive state of preschoolers with hyperopia ametropia, which is manifested as higher the hyperopia diopter, the shorter AL and the shallower vitreous cavity, which are co-involved in the change of refractive state, while the hyperopic degree had no correlation with ACD, LT and K. The axial refractive error is the main refractive error in preschoolers.
ABSTRACT
@#AIM: To analyze the therapeutic effects of comprehensive amblyopia therapy in 715 eyes of children.<p>METHODS: Three hundred and nineteen-three cases(715 eyes)of amblyopia were included in this study, who were diagnosed and treated in our hospital from July 2015 to July 2017. The amblyopia treatment file was established, and the therapeutic effect of amblyopia comprehensive therapy was observed. The relationship between age, amblyopia type, amblyopia degree, treatment compliance and fixation were analyzed.<p>RESULTS: Totally 393 children(715 eyes), 520 eyes(72.7%)were basically cured, 117 eyes(16.4%)were progressive, and 78 eyes(10.9%)were ineffective. The total effective rate was 89.1%. The age, amblyopia type, amblyopia degree, fixation and treatment compliance were related with the therapeutic effect of amblyopia respectly.<p>CONCLUSION:The overall treatment effect of amblyopia in children is better. It is closely related to the clinical characteristics included age, amblyopia type, amblyopia degree, fixation and treatment compliance. The treatment effect was poor in children with older age, amblyopia type of aberrant amblyopia, strabismus amblyopia, severe amblyopia, paracentric fixation and poor compliance.
ABSTRACT
· AIM:To investigate the incidence and risk factors of retinopathy of prematurity (ROP) in preterm infants.· METHODS:The wide-field digital pediatric Retinal imaging system was used to screen 2203 preterm infants with gestational age ＜ 37wk or birth weight ≤ 2000g in NICU and the Ophthalmology Department of Northwest Women and Children Hospital from January 15,2015 to October 15,2017.The screening results were used to calculate the incidence of ROP and to analyze the risk factors.· RESULTS:Totally 367 infants (621 eyes) were diagnosed as retinopathy among 2203 premature infants and the incidence of ROP was 16.66％;236 cases (399 eyes) of ROP (26.61％) were detected in 887 cases of premature infants in accord with screening standard of the Chinese Premature Retinopathy Screening Guidelines (2014),and 131 cases (222 eyes) of ROP (9.95％) was detected in 1316 cases of premature infants outside the screening standard.In our research,the incidence of ROP was related with gestational age,birth weight,oxygen duration and mechanical ventilation.However,the relationship had not been found with artificial insemination,caesarean birth,gender,polyembryony,acute respiratory distress syndrome (ARDS),hypertensive disorders in pregnancy,gestational diabetes mellitus,intrauterine infection,intrauterine distress,premature rupture of membrane.The incidence of ROP was statistically significant between different gestational age groups,different birth weight groups and different oxygen groups (P＜ 0.05).Logistic analysis showed that gestational age,birth weight,oxygen duration and mechanical ventilation were independent risk factors of ROP.· CONCLUSION:The incidence of ROP is 16.66％ in this study,and there is still a certain proportion outside the screening standard of the Chinese Premature Retinopathy Screening Guidelines (2014).Gestational age,birth weight,oxygen duration and mechanical ventilation are high risk factors for ROP.
ABSTRACT
OBJECTIVE: Tiny cerebral aneurysms are difficult to embolize because the aneurysm's sac is too small for a single small coil, and coils within the aneurysm may escape from the confinement of a stent. This study was performed to introduce the stent-assisted coil-jailing technique and to investigate its effect on the coil embolization of tiny intracranial aneurysms. MATERIALS AND METHODS: Sixteen patients with tiny intracranial aneurysms treated with the stent-assisted coil-jailing technique between January 2011 and December 2013 were retrospectively reviewed and followed-up. RESULTS: All aneurysms were successfully treated with the coil-jailing technique, and at the end of embolization, complete occlusion of the aneurysm was achieved in 9 cases (56.3%), incomplete occlusion in 6 (37.5%), and partial occlusion in 1 (6.3%). Intraprocedural complications included acute thrombosis in one case (6.3%) and re-rupture in another (6.3%). Both complications were managed appropriately with no sequela. Follow-up was performed in all patients for 3-24 months (mean, 7.7 months) after embolization. Complete occlusion was sustained in the 9 aneurysms with initial complete occlusion, progressive thrombosis to complete occlusion occurred in the 6 aneurysms with initial near-complete occlusion, and one aneurysm resulted in progressive thrombosis to complete occlusion after initial partial occlusion. No migration of stents or coils occurred at follow-up as compared with their positions immediately after embolization. At follow-up, all patients had recovered with no sequela. CONCLUSION: The stent-assisted coil-jailing technique can be an efficient approach for tiny intracranial aneurysms, even though no definite conclusion regarding its safety can be drawn from the current data.