Surface roughness evaluation and whitening efficiency on tooth enamel after using whitening toothpaste: a randomized double-blinded study

The aim of this randomized double-blinded study was to evaluate the enamel surface roughness and color change after one month of whitening toothpaste use and the color stability obtained 1 month after its interruption. 30 volunteers were divided into 3 groups (n = 10) corresponding to the dentifrices: 1) Colgate Total 12 Clean Mint (TD) (Control), 2) Colgate Luminous White (LW) and 3) Sensodyne Whitening Extra Fresh (SB). The volunteers were impression with addition silicone to obtain an epoxy resin replica of the upper central incisor for the initial surface roughness evaluation using a profilometer and the initial color of the incisors and canines was evaluated with a spectrophotometer after one week of wash-out. After 1 month, the color of the central incisors and canines was measured again, and the volunteers were molded to obtain a second replica to the final roughness analysis. Data were submitted to ANOVA-one way (p≤0.05). The results showed that there was no statistical difference between the dentifrices for color difference and surface roughness for all the studied conditions. It was possible to conclude that the whitening dentifrices used in this study were not able to alter the initial color of the teeth and did not cause changes in the surface roughness of enamel.

Spatiotemporal analysis of distribution of pest and predator in corn crops

Crop pests have negative impacts on yield. This paper proposes a spatiotemporal geostatistical modeling to compare data of adult Syrphidae fly count and corn leaf aphid Rhopalosiphum maidis (Fitch, 1856) colonies in corn crops. The use of a geostatistical model that allows the space-time variation makes the approach more interesting because it is a more complete model. Multiple regression was used to model the trend component for the variable response adult Syrphidae fly count and corn leaf aphid colonies, with the coordinates serving as covariates and the spatiotemporal variations around the deviation are described by a random spacetime residual field. Finally, the prediction map obtained by kriging may be a biological indicator of possible corn leaf aphid colonies in the corn crop. It was possible to verify that the occurrence of the pest provided a significant increase in adult predators and seminatural habitats may favor populations of natural enemies.

Effects of desensitizing products on the reduction of pain sensitivity caused by in-office tooth bleaching: a 24-week follow-up

Abstract Objective To clinically assess the effect of desensitizing gels and dentifrices on the reduction in pain sensitivity and color variation during tooth bleaching. Methodology A total of 108 volunteers were randomly separated into the following groups of n=12: GT/S-glycerine and thickener/sucralose; NF/S-potassium nitrate and sodium fluoride/sucralose; NA/S-potassium nitrate and arginine/sucralose; GT/AC-glycerine and thickener/arginine and calcium carbonate; NF/AC-potassium nitrate and sodium fluoride/arginine and calcium carbonate; NA/AC-potassium nitrate and arginine/arginine and calcium carbonate; GT/PN-glycerine and thickener/potassium nitrate; NF/PN-potassium nitrate and sodium fluoride/potassium nitrate; and NA/PN-potassium nitrate and arginine/potassium nitrate. Sensitivity was assessed with the numerical analogue scale, and color variation (ΔE) was measured with a spectrophotometer. The sensitivity values obtained were subjected to a multivariate analysis of variance (MANOVA) and color variation values were subjected to a randomized analysis of variance (p<0.05). Results The NF/AC, NA/AC, NF/PN, and NA/PN groups presented lower sensitivity values and reduced sensitivity compared to those of the other groups throughout the clinical sessions. None of the groups showed sensitivity at the 24-week assessment. Statistically, no significant difference were observed in the color values among the groups four weeks after the beginning of bleaching (p=0.074). Additionally, the color assessment of all groups was statistically similar four weeks (p=0.084) and 24 weeks (p=0.118) after the beginning. Conclusion Our results indicate that adding NF/S, NA/S, NF/AC, and NA/AC desensitizers to tooth bleaching protocols reduces pain sensitivity without affecting its effectiveness.

Effects of primer excess on marginal adaptation, nanoleakage and bond strength of adhesive systems after aging

There is no consensus about the amount of primer inserted into the cavity. Aim: This study aimed to evaluate the effects of the amount of primer used on dentin microtensile bond strength (µTBs), nanoleakage and marginal sealing, following thermomechanical aging. Methods: 48 human third molars were selected and a box-shaped class I cavity was constructed to maintain enamel margins. Teeth were randomly assigned to 6 experimental groups (n=8). For the bonding protocols of the restorative procedure, two adhesive systems were used: three-step etch-and-rinse and two-step self-etch. Epoxy resin replicas of the occlusal surface were made, and the specimens were submitted to thermomechanical aging. Newer replicas were obtained after thermomechanical aging, and marginal adaptation was observed using SEM. To obtain sections (0.7 x 0.7 mm) for testing at a tension of 0.5 mm/min, teeth were serially sectioned in the buccallingual direction, parallel to the occlusal surface. Failure mode was then obtained. For nanoleakage evaluation, one section of each tooth was immersed in AgNO3 and evaluated using SEM. The µTBs data were submitted to a two-way ANOVA and Tukey's test (α= 0.05) Results: One drop of primer promoted higher µTBs than two or three drops. Besides, the three-step etch-and-rinse promoted greater µTBs (19.78) than the two-step self-etch adhesive (12.23). The increase in the amount of primer was directly proportional to the increase of infiltration. All groups exhibited more gaps after thermomechanical aging. Conclusion: Using an excess of primer is not recommended because it reduces the µTBs and forms an unsatisfactory hybrid layer

Influence of whitening dentifrices and mechanical brushing on color change and surface roughness of bulk fill resins

The use of whitening dentifrices during oral hygiene may cause surface modifications such as color change (ΔE) and increase surface roughness (Ra) of composite resin. Aim: This study aimed to evaluate the effect of whitening dentifrices and mechanical brushing on color change and surface roughness of Bulk Fill (Filtek Bulk Fill - F) and (Aura Bulk Fill - A) composite resins. Materials and methods: Sixty cylindrical specimens were fabricated of each composite resin. After initial color evaluations (Konica Minolta CM-700d), with D65 standard illuminant, and the surface roughness (Surfcorder SE 1700, Kosalab), the specimens were assigned (n=10) according to the whitening dentifrice used: True White (T), Colgate Total 12 Professional Whitening (D), Luminous White Advanced (L). Specimens were submitted to mechanical brushing (10,000 cycles); new color and surface roughness evaluations were taken. Data were analyzed by ANOVA, Duncan test and Dunnet test were used to identify differences between groups (α=5%). Results: The results showed that the tooth brushing time promoted a significant increase in ΔE of the FT group. The FD group exhibited intermediate values of ΔE and was similar to all groups tested. There was a significant increase in the surface roughness of the AD and AT groups after the mechanical tooth brushing. Conclusion: The results showed no significant changes were observed in surface roughness for F groups after toothbrushing. It be concluded that the color change and surface roughness of the composite resins after toothbrushing are dependent on the interaction between the composition of the composite resin and the characteristics of the dentifrice

Selection of mango rosa genotypes in a breeding population using the multivariate-biplot method / Seleção de genótipos em uma população de melhoramento de manga rosa usando o método multivariado biplot

ABSTRACT: Mango ( Mangifera indica L.) trees stand out among the main fruit trees cultivated in Brazil. The mango rosa fruit is a very popular local variety (landrace), especially because of their superior technological characteristics such as high contents of Vitamin C and soluble solids (SS), as well as attractive taste and color. The objective of this study was to select a breeding population of mango rosa (polyclonal variety; ≥5 individuals) that can simultaneously meet the fresh and processed fruit markets, using the multivariate method of principal components and the biplot graphic. The principal components, biplot graphic, and phenotype correlations were obtained using the R (2012) software. Pulp percentage and the pulp, skin, and seed mass variables can be indirectly selected using the smallest fruit diameter, which allowed an easier measurement. The P23R AREA3, P30R AREA3, and P32R AREA3 genotypes are selection candidates due to the presence of alleles, which are important agro-technological traits for mango breeding. This study showed that the biplot analysis is a valuable tool for decision making and visualization of interrelationships between variables and genotypes, facilitating the mango selection process.

RESUMO: Dentre as principais fruteiras cultivadas no Brasil, destaca-se a mangueira ( Mangifera indica L.). A manga rosa é uma variedade local bastante apreciada, especialmente devido a suas características tecnológicas superiores, tais como alto teor de Vitamina C, conteúdo de sólidos solúveis totais (SS), bem como sabor e cor atraentes. O objetivo deste estudo foi selecionar uma população de melhoramento de manga rosa (variedade policlonal; ≥5 indivíduos) que atenda simultaneamente aos mercados de frutas frescas e processadas, empregando o método multivariado de componentes principais e o gráfico biplot. Os componentes principais, o gráfico biplot e as correlações fenotípicas foram obtidos usando o software R (2012). As variáveis porcentagem de polpa e as massas de polpa, casca e semente podem ser selecionadas indiretamente por meio do diâmetro menor do fruto, que permite uma mensuração mais fácil. Os genótipos P23R ÁREA3, P30R ÁREA3, e P32R ÁREA3 são candidatos à seleção devido à presença de alelos para caracteres agrotecnológicos, que são importantes para o melhoramento da manga. Este estudo mostrou que a análise biplot é uma ferramenta valiosa para a tomada de decisão e visualização das inter-relações entre variáveis e genótipos, facilitando o processo seletivo da manga.

Influência da camada híbrida na resistência à microtração de sistemas adesivos após armazenamento / Hibrid layer influence in bond systems microtensile test after storage

O objetivo deste estudo foi avaliar a resistência à microtração de sistemas adesivos em função da presença ou não da camada de colágeno e do tempo de armazenamento. Para tanto foram utilizados 24 terceiros molares restaurados utilizando-se diferentes sistemas adesivos, com ou sem tratamento prévio com NaOCl, e armazenados por 24 horas e 12 meses. Os valores de resistência foram submetidos à análise estatística. O tratamento prévio com NaOCl não foi significativo em 24 horas. Entretanto, este tratamento manteve resultados satisfatórios de adesão após 12 meses para todos os sistemas adesivos, com exceção apenas do Prime & Bond NT.

The aim of the present study was to evaluate the microtensile bond strength of different bond systems due to presence or absence of the collagen layer and storage time. Therefore, 24 third molars were restored using different bond systems, with or without pretreatment with NaOCl, and stored for 24 hours and 12 months. The microtensile strength values were subjected to statistical analysis. The pretreatment with NaOCl was not significant in 24 hours. However, this pretreatment remained satisfactory bond results after 12 months for all bond systems, except for Prime & Bond NT.

Biologia de Mahanarva fimbriolata em gramíneas forrageiras / Biology of Mahanarva fimbriolata on forage grasses

Estudou-se a biologia de Mahanarva fimbriolata nas gramíneas Setaria anceps cv. 'Kazungula', Brachiaria brizantha cv. 'Marandu', ecótipos BB 33, BB 39, seleções IAC-BBS 5 e IAC-BBS 8, e cana-de-açúcar. 'SP-80-1842' (testemunha) em laboratório, visando a avaliar a resistência desses genótipos a essa praga. Os parâmetros avaliados foram: mortalidade e duração da fase de ninfa, razão sexual, período de pré-oviposição, número de ovos por fêmea, longevidade, duração e viabilidade da fase embrionária. Constatou-se maior mortalidade e prolongamento na fase de ninfa em IAC-BBS 8, B. brizantha cv. 'Marandu' e S. anceps cv. 'Kazungula'. Os menores valores de longevidade e fecundidade foram verificados em IAC-BBS 8 e IAC-BBS 5 e os maiores em cana-de-açúcar. A menor viabilidade da fase embrionária foi obtida em IAC-BBS 5 e a maior em IAC-BBS 8. Segundo os resultados da tabela de vida, a taxa líquida de reprodução (Ro) e a taxa finita de crescimento (λ) foram menores em IAC-BBS 8. Concluiu-se que IAC-BBS 8 é o genótipo mais resistente a M. fimbriolata, sendo a resistência do tipo antibiose e/ou não-preferência para alimentação.

Under controlled conditions, six forage grasses (Setaria anceps cv. 'Kazungula' and Brachiaria brizantha cv. 'Marandu'; and codified genotypes BB33, BB39; BBS 5 and BBS8), along with a control check (sugarcane cv. 'SP80-1842') were evaluated as to Mahanarva fimbriolata resistance. The following parameters have been evaluated: nymphal phase duration and mortality, sex ratio, pre-oviposition period, number of eggs per female, longevity, viability and embryonic period. The highest mortalities and longer nymphal periods occurred on BBS 8, cv. 'Marandu' and cv. 'Kazungula'. BBS5 also caused high nymph mortality, however with the shortest nymphal period. The lowest longevity and fecundity values were detected for BBS5 and BBS8, whereas the sugarcane control check revealed the highest one. As to embryonic phase viability, BBS 8 originated the highest values and BBS 5, the lowest ones. Among the tested plants, BBS 8 along with the cv. 'Marandu', proved to be the most resistant genetic material, both through antibiosis and/or nonpreference for feeding mechanism.

Interferências no consórcio de milho com Urochloa spp. / Interferences in the intercropping of corn with Urochloa spp.

Objetivou-se com este trabalho estudar a inter-relação entre a cultura de milho e cultivares de Urochloa spp. em consórcio, assim como a interferência de plantas daninhas nesses sistemas. O ensaio foi aleatorizado em três blocos em esquema de parcelas subdivididas, sendo as parcelas constituídas por sete sistemas de produção (Urochloa brizantha cv. 'Marandu' e cv. 'Piatã' e U. decumbens cv. 'Basilisk' em cultivo solteiro e em consórcio com o milho e cultivo solteiro de milho) e as subparcelas pelo controle de plantas daninhas (com e sem capina manual). Verificou-se que o estabelecimento dos consórcios de milho com as cultivares de Urochloa spp. não afeta os componentes de rendimento de produção, altura e produtividade do milho, assim como não reduz a comunidade de plantas daninhas, mas interfere na densidade populacional e massa de matéria seca por planta e por área das cultivares de Urochloa spp. Houve níveis de interferência semelhantes das plantas daninhas entre os sistemas de produção sem capina, devido à similaridade entre suas comunidades de plantas daninhas, com predomínio de espécies consideradas altamente competitivas, como Panicum maximum, e à predominância de espécies como Richardia brasiliensis e Ageratum conyzoides, associadas ao controle com capina.

This research was carried out to study the interaction between the corn and Urochloa spp. cultivars in association, as well as the interference of weeds in this cropping system. A randomized experiment in three blocks with split-plots design was conducted. The plots consisted of seven cropping systems (Urochloa brizantha cv. 'Marandu' and cv. 'Piatã' and U. decumbens cv. 'Basilisk' a sole culture and in association with corn as well as the sole culture of corn) and the split-plots by weed control (with and without weeding). It was found that the establishment of corn-Urochloa spp. cultivars association does not affect yield components such as height and grain yield, nor reduces the weed community, but interferes in the density, mass of dry matter per plant and per area of Urochloa spp. cultivars. There were similar levels of interference of weeds between cropping systems without weeding due to the similarity between the weed communities, showing the predominance of species considered as highly competitive such as Panicum maximum and also due to the low infestation with predominance of species such as Richardia brasiliensis and Ageratum conyzoides, associated with weed control.

Interação genótipo x local x regime alimentar em bovinos nelore por meio de componentes principais de três modos

O principal objetivo deste estudo foi aplicar componentes principais com múltiplas matrizes de dados para verificar a interação tripla genótipo x local x regime alimentar no valor genético do efeito direto do peso, aos 205 dias de idade. Foram utilizados touros com filhos em três regiões de produção do Nordeste Brasileiro (Maranhão, Mata e Agreste, e Recôncavo Baiano) e criados nos regimes alimentares a pasto ou com suplementação. Não se evidenciou interação genótipo x local para a característica estudada, entretanto, constatou-se interação do genótipo x regime alimentar. A utilização dos touros deve ser direcionada de acordo com o regime alimentar de seus filhos.

The main objective of this study was to apply three-mode principal component analysis to assess the triple interaction (genotype x location x feeding) on direct genetic value for weight at 205 days of age. We used 60 sires with offspring in three regions of northeastern Brazil (Maranhão, Mata and Agreste, and Recôncavo Baiano) and raised on a pasture regime or with supplementation. There was no interaction between genotype and location, but there was a correlation between genotype and direct effect of feeding. The use of sires should be dictated according to the system of rearing of their offspring.

Water quality assessment in piracicamirim creek upstream and downstream a sugar and ethanol industry through toxicity tests with cladocerans

An environmental impact study was conducted to determine the Piracicamirim's creek water quality in order to assess the influence of effluents from a sugar industry in this water body. For this, toxicity tests were performed with a water sample upstream and downstream the industry using the microcrustaceans Daphnia magna, Ceriodaphnia dubia and Ceriodaphnia silvestrii as test organisms, as well as physical and chemical analysis of water. Results showed that physical and chemical parameters did not change during the sampling period, except for the dissolved oxygen. No toxicity was observed for D. magna and reproduction of C. dubia and C. silvestrii in both sampling points. Thus, the industry was not negatively impacting the quality of this water body.

Relação de estratificação como indicador do sequestro de carbono em macroagregados de Latossolo sob plantio direto / Stratification ratio as soil carbon sequestration indicator in macroaggregates of Oxisol under no-tillage

A redução no conteúdo de carbono (C) nas camadas mais profundas do solo indica a estratificação entre a camada superficial e as subsuperficiais, devido à adição contínua de C pelos resíduos culturais na superfície. O objetivo deste trabalho foi avaliar a variação (∆) da relação de estratificação (RE) de carbono como indicadora do sequestro de C total e particulado em macroagregados de dois Latossolos de classes texturais diferentes, manejados em sistema plantio direto. Os ensaios foram desenvolvidos em delineamento inteiramente casualizado com doze repetições. Os fatores analisados foram: (a) dois solos (Latossolo Vermelho Distrófico típico com classe textural franco-argilo-arenosa e Latossolo Vermelho Distrófico típico com classe textural franco-argilosa); (b) duas camadas de amostragem (0-5 e 5-20cm de profundidade); (c) duas épocas de amostragem (E1-outubro de 2007; E2-setembro de 2008). Observou-se relação linear e significativa entre o delta RE com a taxa de sequestro de C total em macroagregados no Latossolo Vermelho com classe textural franco argilo arenosa (R²=0,78**) e franco argilosa (R²=0,81**), indicando ter havido sequestro de C e confirmando ser este um indicador sensível da taxa de sequestro de C no solo em macroagregados.

The decrease in soil organic carbon (SOC) content in deeper layers indicates the occurrence of stratification between the surface layer and subsurface layer of soil due to continuous C addition by crop residues. The objective was to evaluate the change (delta) of stratification (RE) of carbon (C) as an indicator of C sequestration and soil total and particulate soil in macroaggregates of two soils (Typic Hapludox) with different textures, managed in no-tillage system. The tests were developed in completely randomized design twelve repetitions.Analyzed factors were: (a) two soils: Oxisol with medium texture and Oxisol with clay texture, (b) sampling depth: 0-5 and 5-20cm, (c) two sampling times (October 2007-T1, September 2008-T2). The results were submitted to variance analysis by program SISVAR 5.3, using the Tukey test at 5% significance. There was a significant linear relationship between the ∆ RE and carbon sequestration rate total macroaggregates Oxisol with medium texture (R²=0.78**) and Oxisol with clay texture (R²=0.81**) indicating that there was C sequestration confirming to be a sensitive indicator of the rate of C sequestration in soil macroaggregates.

Toxicidade aguda e crônica do extrato de NIM (Azadirachta indica) para Ceriodaphnia dubia / Acute and chronic toxicity of the extract of Nee (Azadirachta indica) to Ceriodaphnia dubia

A preocupação com as questões ambientais tem levado ao crescimento de pesquisas relacionadas aos compostos com potencial no controle de pragas na agricultura, direcionando alternativas que minimizem os impactos ao ambiente. Nesse sentido acredita-se que a utilização de produtos proveniente de plantas possa representar opção eficaz para o controle de pragas com menor risco ambiental.Objetivou-se com este trabalho avaliar a toxicidade aguda e crônica de uma formulação comercial de nim para Ceriodaphnia dubia. A CE50 (48h) determinada foi de 0,032 mL·L-1, e os valores de CENO, CEO e VC foram respectivamente em mL·L-1:0,004; 0,008 e 0,006. Os testes de toxicidade mostraram efeitos do produto tanto na mobilidade como na reprodução de C. dubia.

Influence of selective acid etching on microtensile bond strength of a self-adhesive resin cement to enamel and dentin

Aim: To evaluate the selective acid etching of enamel and dentin on microtensile bond strength (¦ÌTBS) of a self-adhesive resin cement. Methods: Forty-eight bovine teeth were selected and had the buccal surface ground to obtain a flat dentin (n=24) or enamel (n=24) surface. Z250 composite resin blocks (4 x 3 x 8 mm) were prepared for cementation at enamel and dentin. Each substrate received three experimental resin cementation strategies: 1) 37% phosphoric acid etching before the application of RelyX Unicem; 2) application of RelyX Unicem alone; 3) RelyX ARC as a control. Samples were light-cured using a halogen light (Optilux 501, 700mW/cm2), for 40 s. Hourglass-shaped specimens were obtained and submitted to a tensile strength at a crosshead speed of 0.5 mm/min in a universal testing machine. For statistical analysis, data were submitted to ANOVA and Tukey¡¯s test at a pre-set alpha (¨¢=0.05). Results: RelyX Unicem showed similar bond strength value (16.5 MPa) when compared to the pretreatment with acid etching (11.9 Mpa) and to the conventional resin cement (18.1 MPa) for enamel. All luting strategies presented similar dentin bond strength, but significantly lower than enamel bond strength. Conclusions: Acid etching prior to RelyX Unicem application did not improve microtensile bond strength for enamel and dentin.

A irradiação gama no tempo de cocção e na absorção de água em grãos de soja com e sem lipoxigenase / The gamma irradiation on the cooking time and absorption of water in soybean grains with and without lipoxygenase

O processamento térmico adequado contribui para aumentar a digestibilidade e eliminar fatores antinutricionais presentes em grãos. Porém, esse processo pode ser prejudicial, causando a perda de nutrientes. A irradiação de grãos pode facilitar sua cocção, reduzindo o tempo de amolecimento. O objetivo do presente trabalho foi avaliar possíveis alterações causadas pela irradiação no tempo de cocção e embebição de grãos de soja convencionais e sem lipoxigenase. As duas cultivares analisadas ('BRS 232' - com lipoxigenase e 'BRS 257' - sem lipoxigenase) diferiram entre si na quantidade de água absorvida, no tempo de embebição e no tempo de cocção dos grãos. A irradiação dos grãos, nas doses de 4kGy e 8kGy, diminuiu a absorção de água e o tempo de cocção.

The appropriate heat processing helps to improve the digestibility and eliminate antinutritional factors present in grain. However, this process can be harmful, causing nutrient losses. The irradiation on grain can facilitate their cooking, and reduces the time for its softening. The objective of this study was to evaluate possible changes caused by irradiation in the time of hydration and cooking in conventional soybean and soybeans without lipoxygenase. The two cultivars ('BRS 232' - with lipoxygenase and 'BRS 257' - without lipoxygenase) differ in the amount of water absorbed, in time of hydration and time of cooking. Irradiation caused lower water absorption, but less time for cooking.

Comparação entre métodos para a análise de coliformes totais e E. coli em amostras de água / Comparison of methods for analysis of total coliforms and E. coli in water samples

Neste estudo foram realizadas as contagens de coliformes totais e de E. coli por meio de três metodologias(fermentação em tubos múltiplos - FTM, Colilert e Colitag) em amostras de água coletadas de três diferentes pontos (abastecimento, bica e rio). O desempenho analítico dessas metodologias foi comparado analisando-se 90 amostras de água. Nas contagens de coliformes totais em amostras de água provenientes de bica e de abastecimento e nas contagens de E. coli em amostras de água coletadas de abastecimento, bica e rio, as técnicas Colilert e Colitag mostraram resultados equivalentes aos da metodologia FTM. Nas análises de coliformes totais em amostras de água do rio, a técnica de FTM apresentou diferenças significativas quando comparada aos testes rápidos. Esta diferença pode ter ocorrido pela presença de Aeromonas nas amostras ou, possivelmente, pela maior capacidade das técnicas Colilert e Colitag em recuperar as células danificadas. Dessa forma, nos casos em que as técnicas rápidas forem equivalentes à metodologia convencional, dá-se preferência ao uso dos primeiros testes, por serem mais rápidos, práticos e de menor custo.

The total coliform and E. coli counts were performed using three methodologies (Multiple-TubeFermentation - MTF, Colilert and Colitag) in water samples collected from three different points (watersupply, spout and river). The performances of three methodologies were compared analyzing ninety watersamples. In the analysis of total coliform of water samples from spout and supply and analysis of E. coliof water samples from supply, tap and river, Colilert and Colitag techniques were equivalent to MTF in counting these bacteria. However, for analyzing the total coliform in water samples collected from river, the MTF technique differed significantly from those rapid tests. This significant difference may be due to the presence of Aeromonas in water samples, or possibly because of the increased capacity of Colilert andColitag techniques in recovering the injured cells. Thus, in event of the rapid technique were equivalent to conventional ones, the former should be used, as they are fast, practical and inexpensive.

Gráficos biplot e joint plot para o estudo da interação tripla / Biplot and joint plot graphics to study the triple interaction

Este trabalho teve os seguintes objetivos: propor uma sistemática para o estudo e a interpretação da estabilidade e adaptabilidade fenotípica, por meio do modelo de Tucker3; avaliar o uso do gráfico joint plot; e comparar os resultados obtidos pela metodologia de três entradas com os resultados obtidos pelos modelos AMMI e pela análise biplot. Os dados utilizados são relativos a experimentos com 13 genótipos de feijão conduzidos em nove experimentos. Os resultados indicaram que o gráfico joint plot facilita o entendimento da interação tripla e traz ao pesquisador informações mais reais sobre a interação tripla do que a modelagem AMMI de duas entradas; o genótipo 6 foi o que menos contribuiu para a interação, e os genótipos 12, 9 e 5 foram os que mais contribuiram para a interação.

The present research had the following objectives: to propose a systematics for the study and the interpretation of the phenotypic stability and adaptability, through Tucker3 models; assess the use of the joint plot; comparing the results obtained by tucker3 model with the results obtained by biplot analysis and AMMI models. The data used are related to the experiments with 13 genotypes of beans that had been lead in 9 distinct experiments. The results indicated that the joint plot graph facilitates the understanding of triple interaction and bring to the researcher more real information about triple interaction, than AMMI modeling of two entries. The genotype 6 was the one which least contributed for the triple interaction and genotypes 12, 9 and 5 were those e which had contributed more for the interaction.

Tabela de vida de fertilidade de três espécies neotropicais de Trichogrammatidae em ovos de hospedeiros alternativos como critério de seleção hospedeira / Fertility life table of three neotropical species of Trichogrammatidae on factitious hosts as a criterion for selection of hosts

Tabela de vida de fertilidade de três espécies neotropicais de Trichogrammatidae em ovos de hospedeiros alternativos como critério de seleção hospedeira. O objetivo deste trabalho foi selecionar o hospedeiro alternativo que permita o melhor desenvolvimento das três espécies neotropicais de tricogramatídeos, Trichogramma atopovirilia Oatman & Platner, 1983; Trichogramma bruni Nagaraja, 1983 e Trichogrammatoidea annulata De Santis, 1972, utilizando-se como parâmetro comparativo as tabelas de vida de fertilidade nos respectivos hospedeiros. Foram estimados a duração média de uma geração (T), taxa líquida de reprodução (Ro), razão infinitesimal (r m) e a razão finita de aumento (λ). A tabela de vida de fertilidade pode ser utilizada para selecionar o hospedeiro alternativo mais adequado para as espécies de tricogramatídeos. Corcyra cephalonica (Stainton, 1865) (Lepidoptera, Pyralidae) foi o hospedeiro alternativo mais adequado para criação de T. annulata e de T. bruni, enquanto que para T. atopovirilia, Anagasta kuehniella (Zeller, 1879) (Lepidoptera, Pyralidae) e/ou C. cephalonica foram os hospedeiros mais adequados. Sitotroga cerealella (Olivier, 1819) (Lepidoptera, Gelechiidae) apresentou baixa capacidade de aumento populacional para as três espécies de parasitóides, sendo, portanto, uma espécie inadequada como hospedeiro alternativo para as mesmas.

The objective of this work was to select the factitious host that permit the best development of three neotropical Trichogrammatidae species, Trichogramma atopovirilia Oatman & Platner, 1983; Trichogramma bruni Nagaraja, 1983, and Trichogrammatoidea annulata De Santis, 1972, using the fertility life table on their respective hosts as a comparative parameter. Mean generation time (T), net reproductive rate (Ro), intrinsic rate of natural increase (r m) and the finite rate of increase (λ) were estimated. A fertility life table is useful to select the most adequate factitious hosts for the trichogrammatid species. Corcyra cephalonica (Stainton, 1865) (Lepidoptera, Pyralidae) was the most suitable factitious host for rearing of T. annulata and T. bruni; while Anagasta kuehniella (Zeller, 1879) (Lepidoptera, Pyralidae) and/or C. cephalonica were the most suitable hosts for T. atopovirilia. Sitotroga cerealella (Olivier, 1819) (Lepidoptera, Gelechiidae) presented a low capacity of population increase for the three species of parasitoids, therefore, being an inadequate species as a factitious host.

Validação cruzada com correção de autovalores e regressão isotônica nos modelos de efeitos principais aditivos e interação multiplicativa / Cross-validation with eigenvalue correction and isotonic regression in the additive main effect and multiplicative interaction model

Neste trabalho é apresentada a aplicação dos modelos AMMI com o propósito de analisar a interação entre genótipo e ambiente em experimentos agronômicos multiambientais com dados balanceados. São apresentados dois métodos de validação cruzada e o aperfeiçoamento desses métodos por meio da correção de autovalores, sendo estes ordenados por meio da regressão isotônica. É realizado um estudo comparativo entre esses métodos por meio de dados reais. Os resultados mostram para esse conjunto de dados que o método de EASTMENT & KRZANOWSKI (1982) seleciona um modelo mais parcimonioso. Além disso, quando esse método é aperfeiçoado com a correção dos autovalores, o número de componentes não se altera. O método de GABRIEL (2002) seleciona um maior número de termos no modelo, e, quando se aplica a correção de autovalores, o número de termos diminui. O aperfeiçoamento desses métodos por meio da correção de autovalores traz um grande benefício para o pesquisador do ponto de vista prático, uma vez que a seleção do número de termos multiplicativos representa um ganho do número de blocos (ou repetições), quando se utiliza o modelo AMMI em vez do modelo completo, sendo, portanto, melhor utilizar o modelo AMMI com correção dos autovalores e selecionar o número de componentes por meio do método de Eastment e Krzanowski.

This paper presents an application of AMMI models - Additive Main effects and Multiplicative Interaction model - for a thorough study about the effect of the interaction between genotype and environment in multi-environments experiments with balanced data. Two methods of crossed validation are presented and the improvement of these methods through the correction of eigenvalues, being these rearranged by the isotonic regression. A comparative study between these methods is made, with real data. The results show that the EASTMENT & KRZANOWSKI (1982) method selects a more parsimonious model and when this method is improved with the correction of the eigenvalues, the number of components are not modified. GABRIEL (2002) method selects a huge number of terms to hold back in the model, and when this method is improved by the correction of eigenvalue, the number of terms diminishes. Therefore, the improvement of these methods through the correction of eigenvalues brings a great benefit from the practical point of view for the analyst of data proceeding from multi-ambient, since the selection of numbers of multiplicative terms represents a profit of the number of blocks (or repetitions), when the model AMMI is used, instead of the complete model.

Controle genético da regeneração in vitro em progênies de Eucalyptus grandis / Genetic control of in vitro regeneration of Eucalyptus grandis

Com o objetivo de avaliar o controle genético da regeneração direta in vitro a partir de plântulas de Eucalyptus grandis, foram utilizadas sementes de 10 progênies de polinização aberta da população base, origem Atherton, localizada em Anhembi, Estado de São Paulo. Vinte dias de cultivo após a germinação, 196 segmentos distais dos hipocótilos por progênie foram inoculados in vitro num Delineamento em Blocos Completos Aleatorizado Generalizado, com duas unidades experimentais por bloco e sete repetições por bloco, usando a interação blocos por progênie como estimadora do erro experimental. Após 14 semanas de cultivo, foram feitas avaliações da regeneração. Houve diferenças significativas de regeneração entre as progênies (P<0,0001) com extremos de regeneração de 11 por cento a 60 por cento. A herdabilidade no sentido restrito entre as médias das unidades experimentais do caráter foi alta (h2m=0,94), indicando que houve um forte controle genético na regeneração in vitro dentro da população. Houve também alta variabilidade dentro da amostra estudada, assim como um forte efeito do progenitor materno sobre a regeneração.

The genetic control of in vitro direct regeneration was tested on seedlings of ten open-pollinated progenies from the base population of Atherton origin of Eucalyptus grandis at University of São Paulo (Brazil). Seeds were germinated in vitro, after twenty days, distal hypocotyls segments from 196 seedlings per progeny were inoculated in culture media at Generalized Complete Randomized Block Design, with two experimental units per block and seven repetitions, using the interaction blocks by progenies as an estimate of the experimental error. At week 14 from the inoculation bud induction was evaluated. Regeneration among progenies were significantly different (P<0.0001). Regeneration varied from 11 to 60 percent. The narrow-sense heritability between means of experimental units for in vitro regeneration was height. (h2m=0.94), indicating a strong genetic control of the trait within the population and also a high maternal effect. High variability within the study sample was found.