Analysis of Thermal Characteristics and Insulation Resistance Based on the Installation Year and Accelerated Test by Electrical Socket Outlets

Background@#Electrical socket outlets are used continuously until a failure occurs because they have no indication of manufacturing date or exchange specifications. For this reason, 659 electrical fires related to electrical socket outlets broke out in the Republic of Korea at 2018 only, an increase year on year. To reduce electrical fires from electrical socket outlets, it is necessary to perform an accelerated test and analyze the thermal, insulation resistance, and material properties of electrical socket outlets by installation years. @*Methods@#Thermal characteristics were investigated by measured the temperature increase of electrical socket outlets classified according to year with variation of the current level. Insulation resistance characteristics was measured according to temperature for an electrical socket outlets by their years of use. Finally, to investigate the thermal and insulation resistance characteristics in relation to outlet aging, this study analyzed electrical socket outlets’ conductor surface and content, insulator weight, and thermal deformation temperature. @*Results@#Analysis showed, regarding the thermal characteristics, that electrical socket outlet temperature rose when the current value increased. Moreover, the longer the time that had elapsed since an accelerated test and installation, the higher the electrical socket outlet temperature was. With respect to the insulation resistance properties, the accelerated test (30 years) showed that insulation resistance decreased from 110 °C. In relation to the installation year (30 years), insulation resistance decreased from 70 °C, which is as much as 40 °C lower than the result found by the accelerated test. Regarding the material properties, the longer the elapsed time since installation, the rougher the surface of conductor contact point was, and cracks increased. @*Conclusion@#The 30-year-old electrical socket outlet exceeded the allowable temperature which is 65 °C of the electrical contacts at 10 A, and the insulation resistance began to decrease at 70 °C. It is necessary to manage electrical socket outlets that have been installed for a long time.

Analysis of Thermal Characteristics and Insulation Resistance Based on the Installation Year and Accelerated Test by Electrical Socket Outlets

Background@#Electrical socket outlets are used continuously until a failure occurs because they have no indication of manufacturing date or exchange specifications. For this reason, 659 electrical fires related to electrical socket outlets broke out in the Republic of Korea at 2018 only, an increase year on year. To reduce electrical fires from electrical socket outlets, it is necessary to perform an accelerated test and analyze the thermal, insulation resistance, and material properties of electrical socket outlets by installation years. @*Methods@#Thermal characteristics were investigated by measured the temperature increase of electrical socket outlets classified according to year with variation of the current level. Insulation resistance characteristics was measured according to temperature for an electrical socket outlets by their years of use. Finally, to investigate the thermal and insulation resistance characteristics in relation to outlet aging, this study analyzed electrical socket outlets’ conductor surface and content, insulator weight, and thermal deformation temperature. @*Results@#Analysis showed, regarding the thermal characteristics, that electrical socket outlet temperature rose when the current value increased. Moreover, the longer the time that had elapsed since an accelerated test and installation, the higher the electrical socket outlet temperature was. With respect to the insulation resistance properties, the accelerated test (30 years) showed that insulation resistance decreased from 110 °C. In relation to the installation year (30 years), insulation resistance decreased from 70 °C, which is as much as 40 °C lower than the result found by the accelerated test. Regarding the material properties, the longer the elapsed time since installation, the rougher the surface of conductor contact point was, and cracks increased. @*Conclusion@#The 30-year-old electrical socket outlet exceeded the allowable temperature which is 65 °C of the electrical contacts at 10 A, and the insulation resistance began to decrease at 70 °C. It is necessary to manage electrical socket outlets that have been installed for a long time.

Direct Detection of Drug-Resistant Hepatitis B Virus in Serum Using a Dendron-Modified Microarray

BACKGROUND/AIMS: Direct sequencing is the gold standard for the detection of drug-resistance mutations in hepatitis B virus (HBV); however, this procedure is time-consuming, labor-intensive, and difficult to adapt to high-throughput screening. In this study, we aimed to develop a dendron-modified DNA microarray for the detection of genotypic resistance mutations and evaluate its efficiency. METHODS: The specificity, sensitivity, and selectivity of dendron-modified slides for the detection of representative drug-resistance mutations were evaluated and compared to those of conventional slides. The diagnostic accuracy was validated using sera obtained from 13 patients who developed viral breakthrough during lamivudine, adefovir, or entecavir therapy and compared with the accuracy of restriction fragment mass polymorphism and direct sequencing data. RESULTS: The dendron-modified slides significantly outperformed the conventional microarray slides and were able to detect HBV DNA at a very low level (1 copy/μL). Notably, HBV mutants could be detected in the chronic hepatitis B patient sera without virus purification. The validation of our data revealed that this technique is fully compatible with sequencing data of drug-resistant HBV. CONCLUSIONS: We developed a novel diagnostic technique for the simultaneous detection of several drug-resistance mutations using a dendron-modified DNA microarray. This technique can be directly applied to sera from chronic hepatitis B patients who show resistance to several nucleos(t)ide analogues.

New Technique for Removal of the Ulnar Intramedullary Nail Failed to Remove: Broken Assembly Piece in the Nail

Methods about removal of intramedullary nail in complicated cases were reported in some literatures but there are no reports about nail removal in the ulna. The authors would like to report such a case and the technique. We removed bone of the inlet site and created another bony window using an osteotome to expose the interlocking screw holes. Only a bony window the size of 2 inter-interlocking holes at the most proximal part of the nail can be used to remove the nail with minimal damage of the triceps brachii tendon and soft tissue.

New Technique for Removal of the Ulnar Intramedullary Nail Failed to Remove: Broken Assembly Piece in the Nail

Methods about removal of intramedullary nail in complicated cases were reported in some literatures but there are no reports about nail removal in the ulna. The authors would like to report such a case and the technique. We removed bone of the inlet site and created another bony window using an osteotome to expose the interlocking screw holes. Only a bony window the size of 2 inter-interlocking holes at the most proximal part of the nail can be used to remove the nail with minimal damage of the triceps brachii tendon and soft tissue.

Panner's Disease Occurred in a Five-year-old Child: A Preliminary Case Report

Panner's disease, osteonecrosis of the capitellum of the elbow, was first reported by Panner in 1927. The disease occurs mainly in boys between 6 and 15 years old and shows unilateral distribution. Pain, stiffness, localized tenderness over the lateral condyle of the elbow, and decreased range of motion are the typical clinical symptoms. Conservative treatment is generally recommended for patients in the early stage of this disease. A few cases of Panner's disease have been reported and few are related to long-term follow-up results. To the best of our knowledge, all reported cases were over six years. Therefore, we report on a five-year-old boy diagnosed as Panner's disease that showed resorption and regeneration of the humeral capitellum with no limitation of motion over three years. The current study was exempted from review by the institutional review board because it was a single retrospective case report. Informed consent was obtained from the patient's guardian.

Panner's Disease Occurred in a Five-year-old Child: A Preliminary Case Report

Panner's disease, osteonecrosis of the capitellum of the elbow, was first reported by Panner in 1927. The disease occurs mainly in boys between 6 and 15 years old and shows unilateral distribution. Pain, stiffness, localized tenderness over the lateral condyle of the elbow, and decreased range of motion are the typical clinical symptoms. Conservative treatment is generally recommended for patients in the early stage of this disease. A few cases of Panner's disease have been reported and few are related to long-term follow-up results. To the best of our knowledge, all reported cases were over six years. Therefore, we report on a five-year-old boy diagnosed as Panner's disease that showed resorption and regeneration of the humeral capitellum with no limitation of motion over three years. The current study was exempted from review by the institutional review board because it was a single retrospective case report. Informed consent was obtained from the patient's guardian.

Extensor Indicis Brevis: A Case Report / 대한정형외과학회잡지

Anatomical variations of the extensor tendon of the hand are common. However, the majority of anomalous variations are asymptomatic throughout a lifetime and are found incidentally during surgery or after trauma of the hand. The index finger has two independent extensor tendons and lower incidence of anomalous variations than other extensor tendons. We experienced a rare muscular variant of extensor indicis proprius (EIP) during a tendon reconstruction for spontaneous rupture of the 3rd and 4th extensor digitorum communis. Tendon reconstruction using EIP was planned preoperatively. However, EIP was absent and anomalous muscle known as extensor indicis brevis, which originated from the capsular ligament of the wrist and inserted into the ulnar side on the 2nd extensor digitorum communis of the extensor hood, was found. We performed tendon reconstruction using an alternative surgical procedure because extensor indicis brevis was not useful. Attention is required during tendon reconstruction because anatomical variation of EIP may affect a surgical procedure.

Acute Rupture of Flexor Tendons as a Complication of Distal Radius Fracture / 대한정형외과학회잡지

Acute rupture of flexor tendons following distal radius fracture is very rare. We experienced four cases of acute rupture of flexor tendons that were treated surgically. Injured tendons included flexor pollicis longus, flexor carpi radialis, palmaris longus and third flexor digitorum profundus. A severely displaced fracture with a volar spike of the distal radius was detected on plain radiographs in all cases. Ruptures of flexor pollicis longus and third flexor digitorum profundus were diagnosed on preoperative examination but ruptures of other tendons were identified during the operation. Repairs of fractures and ruptured tendons were performed simultaneously and good functional outcomes were achieved.

Evaluation of Associated Carpal Bone Fractures in Distal Radial Fractures

BACKGROUND: The purpose of this study was to investigate the frequency and distribution of associated carpal bone fractures (CBFs) in distal radial fractures (DRFs). METHODS: Three hundred and thirteen patients who underwent surgical treatment for DRFs between March 2007 and January 2010 were reviewed retrospectively. In this study, 223 patients who had preoperative computed tomography (CT) were included. We investigated the frequency and distribution of associated CBFs on CT scans. The relationship between the frequency of associated CBFs and patient factors such as age, gender, body mass index, and the mechanism of injury was assessed. RESULTS: CBFs were complicated in 46 of 223 DRFs (20.9%). The distribution of CBFs was 23 cases in the triquetrum, 16 in the lunate, 12 in the scaphoid, five in the hamate, and four in the pisiform. Among the 46 cases, a fracture of one carpal bone occurred in 36 cases, two in seven cases, three in two cases, and four in one case. In 10 of the 46 cases, associated CBFs occurred in more than two carpal bones. No significant differences were observed for age, sex, body mass index, or the mechanism of injury between patients with DRFs and CBFs and those without CBFs. CONCLUSIONS: Because CBFs that mainly occur in the proximal carpal row are complicated in DRFs at a relatively high frequency, assessment of carpal bones using CT scans is beneficial.

Acute Cerebral Infarction Associated With Stress Erythrocytosis: Susceptibility-Weighted Imaging Findings

No abstract available.

A Case of Idiopathic Isolated Hypoglossal Nerve Palsy / 영남의대학술지

Isolated hypoglossal nerve palsy is a rare clinical condition and it causes deviation of the tongue and dysarthria. A 50-year-old female presented with tongue deviation to the left and mild dysarthria. She had no remarkable past medical history except several recent upper respiratory infections. On examination, the other cranial nerves were intact and she had no focal neurological signs. The findings of MRI and MR angiography were normal. Cerebrospinal fluid analysis revealed only mild elevation of protein. We diagnosed her as suffering with idiopathic isolated hypoglossal nerver palsy and we administered steroid therapy. The dysarthria was improved, but the tongue deviation still remained at 50 days after onset. We report here on a rare case of idiopathic isolated hypoglossal nerve palsy.

Expression and functional characterization of odontoblast-derived gene: OD314 / 대한치과보존학회지

Odontoblasts are responsible for the formation and maintenance of dentin. They are known to synthesize unique gene products including dentin sialophosphoprotein (DSPP). Another unique genes of the cells remain unclear. OD314 was isolated from the odontoblasts/pulp cells of rats and partially characterized as an odontoblast-enriched gene (Dey et al., 2001). This study aimed to elucidate the biological function of OD314, relating to odontoblast differentiation and dentinogenesis. After determining the open reading frame (ORF) of OD314 by transient transfection analysis using green fluorescent protein (GFP) expression vector, mRNA in-situ hybridization, immunohistochemistry, reverse transcription-polymerase chain reaction (RT-PCR) and western analysis were performed. The results were as follows: 1. In in-situ hybridization, OD314 mRNAs were expressed in odontoblasts of developing coronal and root pulp. 2. OD314 was a novel protein encoding 154 amino acids, and the protein was mainly expressed in cytoplasm by transient transfection analysis. 3. Mineralized nodules were associated with multilayer cell nodules in the culture of human dental pulp cells and first detected from day 21 using alizarin-red S staining. 4. In RT-PCR analysis, OD314, osteocalcin (OC) and DSPP strongly expressed throughout 28 days of culture. Whereas, osteonectin (ON) mRNA expression stayed low up to day 14, and then gradually decreased from day 21. 5. Western blots showed an approximately 17 kDa band. OD314 protein was expressed from the start of culture and then increased greatly from day 21. In conclusion, OD314 is considered as an odontoblast-enriched gene and may play important roles in odontoblast differentiation and dentin mineralization.

Conservative Treatment of Femoral Shaft Fractures in Children / 대한정형외과학회잡지

Forty-nine children between the ages of 2 and 10 years, treated conservatively for fomoral shaft fracture, were studied clinically and radiographically to access the complications and related factors. They had an average follow-up of 48.8months(range, 12 to 77months). 35 percent of the patients had significant associated injuries. Leg length discrepancies of 10mm to 20mm are observed in 5 cases(10%) of the patients. The average overlap of bone ends at union was 6.5mm. The average growth acceleration was 8.8mm regardless of sex, age, upper limb dominance, fracture site or shape, but was promoted by overriding of the fracture ends at union, There were 16 cases(32%) of excessive angular deformity of 10° to 25° after union. However all deformities were remodelled enough to give normal alignment of the joint surface. The growth plate played on important role in the remodelling process.