ABSTRACT
Objective To investigate the features of intravertebral vacuum phenomenon (IVP)in vertebral compression fractures (VCFs). Methods Two hundred and nine patients with VCFs underwent percutaneous vertebroplasty (PVP) and percutaneous kyphoplasty (PKP). The biopsies and the images of X-ray, CT, MRI of VCFs were obtained. The consistency between IVP and osteonecrosis on histology and the positive predictive value (PPV), negative predictive value (NPV), sensitivity, specificity and Youden index of IVP for diagnosing local osteonecrosis in VCFs were analyzed. Fisher exact probability test was used to analyze the coherence between IVP and osteonecrosis. Results Histological examination revealed 146(69.9%) osteoporoses, 10 (4.8%) osteonecroses with osteoporoses, 53 (25.4%) neoplasms. Prior to surgery,10 cases of IVP were found. Plain radiograph showed horizontally oriented lucent cleft in the vertebral body;CT further confirmed the location of gas;T_1-weighted MR image appeared hypointensity,while the signal intensity of T_2-weighted MR image differed, depending on the duration of recumbency. Nine of 10 patients with IVP showed osteonecrosis on histology, while 9 of 10 patients with osteonecrosis contained IVP. The association of osteonecrosis on histology and the IVP was statistically significant(P <0.01). The PPV, NPV, sensitivity, specificity, and Youden index for diagnosing local osteonecrosis was 90% (9/10), 99.5% (198/199), 90.0% (9/10), 99.5% (198/199), and 0.9, respectively. Conclusion The IVP is stongly suggestive of local osteonecrosis in vertebral compression fracture.
ABSTRACT
Objective To explore the safety and effectiveness of percutaneous vertebrophasty(PVP)in the treatment of the metastatic tumor involved axis.Methods Ten patients(8 male,2 female)with osteolytic metastases involved axis were treated with PVPs.The anterolateral approach with fluoroscopy guidance was selected in 9 cases,while the posterolateral approach with CT guidance was selected in 1 case.Results Successful unilateral-paracentesis for PVP were achieved in all patients without intervention related complications such as bleeding and symptomatic polymethylmethacrylate(PMMA)leakage.CT scan taken following PVP showed that over 70% of the osteolytic metastatic area was well filled with PMMA in all cases.Varying degrees of pain relief were observed(CR in 7 cases,PR in 3 cases)within 7 days.All patients could support their heads without brackets.During a 3 to 24 months follow up after the procedures,No aggravated pain was found in the group.Two patients died in 4 months,3 Patients died in 8 to 11 months 4 patients died in 13 to 15 months,and 1 patient still was alive after 24 months.Conclusion Anterolateral or posterolateral approach to Aixs in PVP is safe and effective in treating osteolytic metastatic tumors.
ABSTRACT
Objective To evaluate the clinical efficacy and safety of kyphoplasty with single balloon cross-midline expansion using unipedicular approach for osteoporotic vertebral body compressive fracture (OVCF).Methods Thirty six cases of painful OVCF were included in the study,with 61 vertebrae involved.Under X-ray fluoroscopy monitoring,kyphoplasty was performed using a unilateral,single,balloon via a unilateral transpedicular approach.A final balloon position was in the midline of the vertebral body with the balloon cross-midline expansions and bone cement filled. Clinical outcomes were determined by comparison of preoperative and postoperative VAS and ODI scores.Radiographic assessment included vertebral height restoration and correction of kyphosis.Follow-up was conducted for 6.0-12.0 months(mean 9.2 months).Results Thirty-six consecutive patients with 61 vertebrae were successfully operated with an operative time of(37.4±9.6)rain per vertebra.All patients had significant pain relief and functional recovery within 96 h after the procedure with no surgery-and device-related complications.VAS score improved from(7.3±1.0)preoperatively to(2.7±0.8)postoperatively(t=19.53,P＜0.01).ODI score was decreased from(71.1±10.9)%preoperatively to(26.6±6.4)%postoperatively(t=18.54,P＜0.01).The average anterior body height loss was(14.3±2.8)mm before procedure and(10.0±1.8)mm after procedure(t=14.68,P＜0.01).The average middle body height loss was(10.2±2.7)mm before procedure and(5.9±1.8)mm after procedure(t=16.44,P＜0.01).The Cobb's angle was corrected from 23.4°±5.0° to 16.2°±2.8°(t=15.60,P＜0.01).Some leakages of cement around the anterior margin of vertebra and inter-vertebral space were found in 2 patients,but there were no clinical symptoms.X-ray examination indicated there were no cement leakages in other vertebra.The pain relief and functional recovery were substantial and maintained to the last follow up without any re-collapse or adjacent level fracture.Conclusions A single-balloon cross-midline expansion using unipedicular approach in kyphoplasty for OVCF is effective and safety,less operation time,less radiation exposure compared to the conventional kyphoplasty technique.
ABSTRACT
BACKGROUND: In kyphoplasty procedure, two balloons are inserted into the vertebral body and inflated simultaneously for height symmetric restoration of the vertebral body. However, the expensive cost of balloon of kyphoplasty limits the extensive development of this procedure in developing countries. In this study, we try to inflate single balloon with bilateral transpedicular routes alternatively to achieve vertebral body height balanced restoration and reduce operation expenditure. But biocompatibility of bone cement and effect of kyphoplasty still need further observation.OBJECTIVE: To investigate the biocompatibility of bone cement and the clinical efficacy of bipedicular kyphoplasty for osteoporotic vertebral compression fractures by inserting single inflatable balloon into injured vertebral body and filling bone cement in the cavity caused by inflating balloon via bipedicular approach.DESIGN: Controlled observation.SETTING: Department of Medical Imaging, General Hospital of Jinan Military Area Command of Chinese PLA.PARTICIPANTS: Twenty-two patients (31 vertebral bodies) undergoing kyphoplasty with single balloon in Department of Medical Imaging, General Hospital of Ji'nan Military Area Command of Chinese PLA from May 2004 to May 2005 were selected, including 5 males and 17 females aged 68-85 years. Patients with painful compression fractures caused by osteoporosis were enrolled, and confirmed by CT and MRI with complete vertebral posterior wall but no spine deformity. The informed consent was obtained from all subjects, and the experiment and treatment were approved by Ethics Committee. METHODS: The especial instrument for kyphoplasty including puncturing device and balloon were provided by Shandong Guanlong Medical Utensils Co., Ltd. [LDAI (T) 2004 No. 2150017]; bone cement (Polymethymethacrylate) was made in China [MAIT 2005(T) No. 3650267]. Under X-ray fluoroscopy monitoring, single inflatable balloon was inserted into fractured vertebral body by puncturing needle and inflated via bipedicular approach to restore vertebral height. MAIN OUTCOME MEASURES: ①Bone cement biocompatibility during and after surgery; ②pain relief within 72 hours after surgery, restoration of vertebral height and correction of kyphotic deformity.RESULTS: ①Bone cement biocompatibility: Little cement leakage was observed at one intervertebral space of one patient by X-ray film, but no clinical symptoms, inflammatory reaction or rejection were found. ②Obvious pain relief was found in 22 cases with within 72 hours after kyphoplasty. ③The height loss of the anterior and middle vertebral body reduced from (14.70±4.21) mm and (10.62±4.11) mm preoperatively to (10.38±4.23) mm and (6.45±4.04) mm postoperatively after single balloon inflation and cement filling. Cobb angle was corrected averagely from (21.15±6.33)° preoperatively to (11.64±4.33)° postoperatively. CONCLUSION:Biocompatibility of bone cement is good, and no specific adverse effects are found in despite of cement leakage. Bipedicular kyphoplasty with single balloon for painful osteoporotic vertebral compression fractures effectively restores vertebral heights and relieves pain.
ABSTRACT
Carotid artery stenting possesses more advantages with lesser damage and pain. From the point of evidence medicine, it could replace the classical technique of carotid endarterectomy as the effective method to manage the carotid artery stenosis. The purpose of this article is to review the issues concerned about the carotid artery stenting. With the accomplishment of many successful clinical large scale experiments carried out by multiple centers ,it is believed that carotid artery stenting will play an important role in the prevention and treatment of cerebral stroke initiated by carotid artery stenosis.
ABSTRACT
<p><b>OBJECTIVES</b>To evaluate the effect of percutaneous vertebroplasty on vertebral tumor metastasis using instruments and drugs made in China and to explore the technique of percutaneous vertebroplasty.</p><p><b>METHODS</b>Thirty-two patients with vertebral metastasis were treated with percutaneous vertebroplasty with instruments and drugs made in China. Anterolateral approach for cervical vertebrae and transpedicular approach for thoracic and lumbar vertebrae were used. The volume of disease focus and the amount of polymethy methacrylate (PMMA) injected were calculated with formula V = 4/3pi (D/2)(3) preoperatively. PMMA with contrast was mixed according to the ratio of powder/liquid/contrast of 3:2:1. The procedures were monitored under fluoroscopy. PMMA was injected in the polymerization time. CT scanning was performed before and after the operation.</p><p><b>RESULTS</b>The percentage of lesion PMMA fill was more than 50% as demonstrated by CT. Clinical data were obtained from the cases followed up for 7 - 12 months, and the rate of pain relief was 90.6% (29/32) at one week, 71.8% (23/32) at six months, and 58.6% (17/29) at 12 months after operation. There were no cases of PMMA leakage that affected clinical performance.</p><p><b>CONCLUSIONS</b>Percutaneous vertebroplasty for vertebral tumor metastasis using instruments and drugs made in China was effective. It is important to prevent paravertebral leaks of PMMA and to ensure that PMMA is injected within the polymerization time.</p>