Bond strength of bulk fill composite to teeth prepared with Er: YAG laser

Aim: The present in vitro study aimed to evaluate the bond strength of a bulk fill composite on dentin surfaces prepared with the Er: YAG laser. Methods: Twenty-four permanent third molars were selected and divided into 2 groups: CP - Conventional preparation with high-speed handpiece (control) and LA (laser) - Preparation with Er: YAG laser. The occlusal surface was removed to expose coronal dentin, which was subsequently prepared with a high-speed handpiece or Er: YAG laser (350mJ, 4Hz, 1.5 ml/min water flow). Both groups were restored with Filtek One Bulk Fill (3M ESPE) composite resin. After 24 hours, the samples were evaluated for microtensile bond strength (µTBS), fracture pattern, and scanning electron microscopy (SEM). Results: The data obtained in the µTBS test were submitted to t-test (α=0.05). The results showed no difference in µTBS when the different types of cavity preparation were compared (ρ=0.091). Fracture patterns revealed the prevalence of cohesive fracture in composite resin in CP (83.3%) and adhesive fracture in LA (92.1%). In the SEM analysis, the LA group demonstrated the presence of gaps between the composite resin and the irradiated dentin surface. The hybrid layer exhibited more regularity with the presence of longer and uniform resin tags in the CP group. Conclusion: The type of cavity preparation did not influence the values of bulk fill composite resin µTBS to dentin. Fracture patterns and scanning electron microscopy analyses suggested less interference at the adhesive interface in preparations performed using CP

Substituição de restauração classe IV em resina composta: relato de caso clínico / Class IV restoration replacement in composite resin: clinical case report

Introdução: a estética é um fator decisivo para a substituição de restaurações anteriores que apresentam falhas, causadas principalmente por alterações na coloração ou fraturas. Objetivo: o presente relato de caso descreve a substituição de uma restauração classe IV insatisfatória, apresentando o protocolo clínico utilizado desde o planejamento até a reabilitação definitiva, com o propósito de difundir o conhecimento sobre a técnica adotada e auxiliar outros profissionais no seu cotidiano clínico. Relato do caso: paciente JPJ, 28 anos, sexo masculino, apresentou-se ao consultório odontológico queixando-se do aspecto estético de uma restauração em resina composta no seu dente anterior. Durante o exame físico intrabucal foi identificada a presença de uma restauração classe IV insatisfatória no elemento 21, apresentando degradação e manchamento superficial. Para uma análise estética completa e planejamento do caso, foram realizadas fotografias intrabucais e moldagem com alginato para confecção de modelos de gesso. Resultados: como tratamento, foi realizado profilaxia, isolamento absoluto e substituição da restauração do dente 21 pela técnica direta com o auxílio de uma guia de silicone. Foi utilizado um sistema adesivo convencional de 2 passos (Single Bond 2, 3M ESPE, St. Paul, MN, USA) e resinas compostas nanohíbridas (Empress Direct, Ivoclar-Vivadent, Barueri, SP, BRA), uma para reprodução do esmalte e outra para dentina. Por fim, foram realizados acabamento e polimento das restaurações. Conclusão: restaurações diretas com resinas compostas, quando bem indicadas e executadas, permitem a devolução da função de forma satisfatória e resultados altamente estéticos.

Introduction: aesthetics are a decisive factor in replacing anterior restorations that present failures, mainly caused by color changes or fractures. Objective: this case report describes the replacement of a class IV restoration with composite resin by the direct technique, presenting the clinical protocol used, from planning to definitive rehabilitation, with the purpose of spreading knowledge of the technique and helping other professionals in their daily clinical routine. Case report: patient JPJ, 28 years old, male, presented to the dental office complaining about the aesthetic aspect of a composite resin restoration on his anterior tooth. During the intraoral physical examination, the presence of a class IV restoration in element 21 was identified, which was unsatisfactory due to degradation and surface staining. For a complete and detailed esthetic analysis, intraoral photographs and molding with alginate were taken to make plaster models. Results: as a treatment, prophylaxis, absolute isolation and replacement of the restoration of tooth 21 were performed by the direct technique with the aid of a silicone guide. A conventional 2-step adhesive system (Single Bond 2, 3M ESPE, St. Paul, MN, USA) and nanohybrid composite resins (Empress Direct, Ivoclar-Vivadent, Barueri, SP, BRA) were used, one for enamel reproduction and another for dentine. Finally, finishing and polishing of the restorations were carried out. Conclusion: direct restorations with composite resins, when properly indicated and executed, allow the return of function in a satisfactory way and highly esthetic results.

Assessment of influence of LED curing units used on microhardness of resin-modified glass ionomer sealants

Aim: Resin modified glass ionomer (RMGI) is class of material that can be used as sealant for preventing and arresting the progression of caries in pits and fissures. As these are hybrid materials, their properties can be affected by factors related to the polymerization process. Therefore, this study aimed to evaluate the influence of different generations of LED curing units (Elipar DeepCure-L and VALO Grand) on Knoop microhardness values (KHN) of RMGI sealants (Clinpro XT and Vitremer). Methods: Forty cylindrical specimens (6mm ø x 1 mm high) were prepared according to the manufacturer's instructions and divided into four groups (n=10) according to the type of RMGI and LED used. The KHN of the top surface of each sample was calculated 7 days after light-curing. Data were submitted to two-way ANOVA (α = 0.05). Results: Vitremer had higher KHN values than Clinpro XT after using both LEDs (p<0.0001), but especially when light-cured with the use of VALO Grand (p<0.0001). Whereas the KHN value of Clinpro was not influenced by the LED device (p>0.05). Conclusions: Top surface microhardness values of RGMI sealants were affected by both material composition and generations of LED curing units used. Third generation LED curing units seemed to be more efficient for the polymerization of RMGI-based sealants

Effect of bleaching gels with different thickeners under normal and hyposalivation conditions: in situ study

Abstract Bleaching gel thickeners induce important changes in tooth enamel and these changes are reversed by saliva. Objective This in situ study aimed to evaluate the effect of bleaching gels with different thickeners on tooth enamel under normal and hyposalivation conditions. Methodology Of 28 participants, 14 had normal salivary flow and 14 had low salivary flow. For each salivary flow, four types of treatment were performed with different thickeners: no bleaching (negative control), bleaching with a commercial 10% carbamide peroxide (CP) gel with carbopol (positive control) and bleaching with experimental 10% CP gels with natrosol and aristoflex. Participants used a palatal appliance containing bovine enamel/dentin specimens for 15 days. From day 2 to day 15, specimens were bleached extraorally. The bleaching gel was applied according to the groups for four hours. When the bleaching gel was removed, the palatal appliance was inserted again in the participants' mouth until the next day for another bleaching application. This procedure was repeated for 14 days and on day 15, surface microhardness (SMH), color (ΔE*ab and ΔE00), surface roughness (Ra), scanning electron microscopy (SEM), and energy-dispersive X-ray spectrometry (EDS) analyses were performed and data were subjected to statistical analysis. Results Neither salivary flow nor thickeners influenced ΔE*ab and ΔE00 results. Carbopol had the lowest SMH, the highest Ra, and the lowest Ca% among all groups. For normal flow, natrosol and aristoflex had higher SMH. For low flow, aristoflex had higher SMH and natrosol and aristoflex had lower Ra. Aristoflex had higher Ca% and Ca/P and differed from carbopol for normal flow. Conclusion For normal flow, 10% CP gels with natrosol and aristoflex caused fewer surface changes, and for low flow, only the 10% CP gel with aristoflex.

Treatment of non-carious lesions: diagnosis, restorative materials and techniques

Management of non-carious cervical lesions (NCCLs) still is a challenge in clinical practice. The diagnosis is the key to treat these lesions successfully. Aim/Case report: Therefore, the aim of this case report is to describe the diagnosis and treatment of generalized abfraction lesions associated to abrasion lesions of a 43 years old patient and to discuss considerations about the technique and materials to be used appropriately. After the diagnosis, a treatment plan with preventive and restorative approach was elaborated. The occlusal adjustment was performed to distribute the contact points and the patient was instructed in relation to tooth brushing habits. It was also recommended that the patient use a dentifrice with potassium nitrate for the control of sensitivity. For lesions over 1mm deep, the restorative treatment was performed using the self-etching adhesive system and nanohybrid composite by the stratification technique. Unsatisfactory restorations have been replaced. Occlusal splint was done and the patient was instructed to use the device every day overnight. One year after treatment, follow-up was performed. The appearance of new NCCLs was not observed. There was no progression of lesions smaller than 1 mm. There was no loss of restorations. All restorations were fully satisfactory and the patient reported absence of dentin hypersensitivity. Conclusion: The treatment performed besides being aesthetically satisfactory after 1 year resulted in the control of the disease, preventing the appearance of new lesions and guaranteeing a better quality of life to the patient

Effect of different concentrations of nanohydroxyapatite on tooth bleaching effectiveness and enamel bond strength / Efeito de diferentes concentrações de nanohidroxiapatita na efetividade clareadora e força de adesão ao esmalte

Objective: To evaluate the effect of 35% hydrogen peroxide (35% HP) combined to different concentrations of nanohydroxyapatite (nHA) on the effectiveness of dental bleaching (superficial enamel and deep dentin) and enamel bond strength. Material and Methods: Fifty bovine dental specimens (5x5x2mm) were divided into 5 groups, according to the treatments (n = 10): no bleaching (negative control); 35% HP (positive control); 35% HP+ 5% nHA; 35% HP + 10% nHa; and 35% HP + 15% nHA. Three in-office bleaching sessions were made. The color analysis was performed on the enamel surface and the opposite dentin, using a spectrophotometer. The results were expressed in the CIE L*a*b* system. After this, the adhesive system was applied to the tooth structure, and the dental specimens received a composite restoration. The microshear bond strength test was performed 24 h after the restoration. Data were submitted to ANOVA and Tukey's test (α=0.05). Results: For the enamel color analysis, all bleached groups differed statistically from the unbleached group, with increasing L* values and decreasing b* values. The addition of different concentrations of nHA did not interfere with the bleaching effectiveness for the enamel and opposite dentin. For microshear bond strength, no statistically significant differences were presented between groups. The adhesive failure rate of the 35% HP + 10% nHA group was lower than the 35% HP group and similar to the negative control. Conclusion: The addition of different concentrations of nHA in 35% of hydrogen peroxide did not interfere with the bleaching efficacy of enamel and deep dentin and did not affect the enamel bond strength after bleaching.(AU)

Objetivo: avaliar o efeito do peróxido de hidrogênio a 35% (HP 35%) associado a diferentes concentrações de nanohidroxiapatita (nHA) sobre a efetividade clareadora do esmalte superficial, dentina profunda e da força de adesão ao esmalte. Material e Métodos: Cinquenta espécimes bovinos (5x5x2mm) foram divididos 5 grupos (n = 10): sem clareamento (controle negativo); HP 35% (controle positivo); HP 35% + nHA 5%; HP 35% + nHA 10%; e HP 35% + nHA 15%. Três sessões de clareamento de consultório foram realizadas. A análise de cor foi realizada na superfície do esmalte e na dentina oposta e os resultados expressos no sistema CIE L*a*b*. Depois disso, os sistemas adesivos foram aplicados no esmalte, e os blocos receberam uma restauração em resina composta. O teste microcisalhamento foi realizado 24 h após a restauração. Os dados foram submetidos à ANOVA e ao teste de Tukey (α = 0,05). Resultados: Para a análise de cor do esmalte, todos os grupos clareados diferiram estatisticamente do grupo não clareado. A adição de diferentes concentrações de nHA não interferiu com a eficácia clareadora para o esmalte e dentina. Para o microcisalhamento, não houve diferença entre os grupos. A taxa de falha adesiva do grupo HP 35% + nHA 10% foi menor do que o grupo HP 35% e similar ao controle negativo. Conclusão: a adição de diferentes concentrações de nHA em PH 35% não interferiu na eficácia clareadora do esmalte e da dentina e não afetou a força de adesão do esmalte após o clareamento (AU)