ABSTRACT
Objective@# To compare the differences in the stress distribution in simulated first molars prepared with three rotary nickel-titanium instruments. @*Methods @#Four simulated first molars were prepared without instruments and with Reciproc, WaveOne and Protaper. Before and after preparation, each simulated molar was scanned by Micro-CT. The data were imported to Mimics 16.0 software to establish three-dimensional models. Finite element analysis was processed with Abaqus 6.14 software under conditions of longitudinal and lateral load. @*Results@# Under vertical load conditions, the maximum von Mises stress of the enamel increased by 1.36%, 21.48% and 20.99% in the Reciproc, WaveOne and Protaper groups, respectively, after preparation, while the maximum von Mises stress of the cementum increased by 55.98%, 41.18% and 33.04%, respectively, and the maximum von Mises stress of the alveolar bone increased by 45.55%, 40.37% and 24.09%, respectively. Under 45° lateral load conditions, the maximum von Mises stress of the enamel increased by 1.79%, -4.58% and 3.82% in the Reciproc, WaveOne and Protaper groups, respectively, after preparation, while the maximum von Mises stress of cementum increased by 16.33%, 7.58% and 4.32%, respectively, and the maximum von Mises stress of the alveolar bone increased by 46.82%, 36.40% and 8.29%, respectively. Under the same conditions, the von Mises stresses of the cementum and alveolar bones of the simulated molars were higher after preparation than before preparation, especially under lateral load conditions. The stress was focused on the border between the crown and the root. The von Mises stress of the cementum and alveolar bones increased much more in the Reciproc group than in the other two groups under both conditions.@*Conclusion@#The von Mises stress of simulated molars was greater after preparation than before preparation. The von Mises stress of the cementum and alveolar bones increased much more in the Reciproc group than in the other two groups.
ABSTRACT
@#With the increasing development of digital technologies, digital surgical templates have been widely used in stomatology. However, the accuracy of digital surgical templates is always a consideration for many researchers and dentists. This article analyzed the factors affecting the accuracy of digital surgical templates and found that errors arise from six factors, including the design and manufacture of the templates, implant guide support, implant systems and guide systems, implant length, bone density and the clinical experience of the operator; this literature review aims to reduce or eliminate human factors and improve accuracy, objectivity and security in implant placement.
ABSTRACT
Objective @#To describe a novel workflow for the anterior dental esthetics in immediate implant and immediate aesthetic restoration with digital technique. @*Methods @#Before the implant placement, a intra-oral optical scan(IOS) combined with CBCT was performed to virtually design the 3D implant position and restoration. A surgical guide and an individualized Ti abutment restoration was CAD/CAM-fabricated out of the PMMA-based in a fully digital workflow and seated at the stage of minimal invasive surgery.@*Results @#The technique achieved immediate implant and immediate restoration after tooth extraction. Immediate restoration of temporary crown could be completed immediately in second patient visit after the operation, finally realized the aesthetic implantation with preserved soft tissue contour. @*Conclusin @# The fully digital technique changed the conventional workflow which achieves more efficiency and better aesthetic effect.
ABSTRACT
@#Gardner syndrome is a rare disease in oral and maxillofacial diseases which is characterized by intestinal polyposis, multiple osteomas, skin and soft tissue tumors. Early treatment has a better prognosis; therefore the early diagnosis of Gardner syndrome is very important. Maxillofacial pathology always appears to precede the other pathologies, so the importance of early detection of the syndrome by dentists is also emphasized. This review summarizes the etiology of Gardner syndrome-related mutations and the clinical manifestations of Gardner syndrome characterized by oral and maxillofacial deformities, multiple gastrointestinal polyps, and desmoid tumour, and their associated treatment.