ABSTRACT
OBJECTIVE@#To compare the biomechanical differences among the five internal fixation modes in treatment of Day type Ⅱ crescent fracture dislocation of pelvis (CFDP), and find an internal fixation mode which was the most consistent with mechanical principles.@*METHODS@#Based on the pelvic CT data of a healthy adult male volunteer, a Day type Ⅱ CFDP finite element model was established by using Mimics 17.0, ANSYS 12.0-ICEM, Abaqus 2020, and SolidWorks 2012 softwares. After verifying the validity of the finite element model by comparing the anatomical parameters with the three-dimensional reconstruction model and the mechanical validity verification, the fracture and dislocated joint of models were fixed with S 1 sacroiliac screw combined with 1 LC-Ⅱ screw (S 1+LC-Ⅱ group), S 1 sacroiliac screw combined with 2 LC-Ⅱ screws (S 1+2LC-Ⅱ group), S 1 sacroiliac screw combined with 2 posterior iliac screws (S 1+2PIS group), S 1 and S 2 sacroiliac screws combined with 1 LC-Ⅱ screw (S 1+S 2+LC-Ⅱ group), S 2-alar-iliac (S 2AI) screw combined with 1 LC-Ⅱ screw (S 2AI+LC-Ⅱ group), respectively. After each internal fixation model was loaded with a force of 600 N in the standing position, the maximum displacement of the crescent fracture fragments, the maximum stress of the internal fixation (the maximum stress of the screw at the ilium fracture and the maximum stress of the screw at the sacroiliac joint), sacroiliac joint displacement, and bone stress distribution around internal fixation were observed in 5 groups.@*RESULTS@#The finite element model in this study has been verified to be effective. After loading 600 N stress, there was a certain displacement of the crescent fracture of pelvis in each internal fixation model, among which the S 1+LC-Ⅱ group was the largest, the S 1+2LC-Ⅱ group and the S 1+2PIS group were the smallest. The maximum stress of the internal fixation mainly concentrated at the sacroiliac joint and the fracture line of crescent fracture. The maximum stress of the screw at the sacroiliac joint was the largest in the S 1+LC-Ⅱ group and the smallest in the S 2AI+LC-Ⅱ group. The maximum stress of the screw at the ilium fracture was the largest in the S 1+2PIS group and the smallest in the S 1+2LC-Ⅱ group. The displacement of the sacroiliac joint was the largest in the S 1+LC-Ⅱ group and the smallest in the S 1+S 2+LC-Ⅱ group. In each internal fixation model, the maximum stress around the sacroiliac screws concentrated on the contact surface between the screw and the cortical bone, the maximum stress around the screws at the iliac bone concentrated on the cancellous bone of the fracture line, and the maximum stress around the S 2AI screw concentrated on the cancellous bone on the iliac side. The maximum bone stress around the screws at the sacroiliac joint was the largest in the S 1+LC-Ⅱ group and the smallest in the S 2AI+LC-Ⅱ group. The maximum bone stress around the screws at the ilium was the largest in the S 1+2PIS group and the smallest in the S 1+LC-Ⅱ group.@*CONCLUSION@#For the treatment of Day type Ⅱ CFDP, it is recommended to choose S 1 sacroiliac screw combined with 1 LC-Ⅱ screw for internal fixation, which can achieve a firm fixation effect without increasing the number of screws.
Subject(s)
Adult , Male , Humans , Finite Element Analysis , Fracture Fixation, Internal/methods , Fractures, Bone/surgery , Pelvis , Spinal Fractures/surgery , Fracture Dislocation/surgery , Joint Dislocations/surgery , Biomechanical PhenomenaABSTRACT
Objective:To optimize the best molding process of Jinpuju Qingrelishi Granules.Methods:Based on the single factor test, the relative density of clear ointment and the amount of diluent (dextrin∶lactose=2∶1) are used as investigating factors, and the overall evaluation of the molding rate and angle of repose overall desirability (OD) is used as the evaluation index. The effect surface method is used to optimize the best molding process of Jinpuju Qingrelishi Granules.Results:The best molding process conditions: the relative density of the clear paste is 1.20 (60 ℃) and the amount of diluent is 3 times that of the clear paste. After mixing the clear paste and diluent, make soft material, pass through a 14-mesh sieve to granulate, dry in an oven (55 ℃) for 1 hour, and sizing to obtain. The molding rates of the three batches of verification test granules were 93.73%, 93.03%, 95.59%, respectively, the predicted OD value was 0.928, the verification value was 0.936, and the deviation from the predicted value was -0.86%.Conclusion:The molding process of this experiment is stable and reliable, with good repeatability, which can provide a reference for the follow-up research of Jinpuju Qingrelishi Granules.
ABSTRACT
Objective:To compare the early outcome of proximal femoral nail antirotation (PFNA) and bipolar hemiarthroplasty in treatment of intertrochanteric fractures in elderly patients aged 90 years or more.Methods:A retrospective case-control study was conducted to analyze the clinical data of 43 elderly patients aged 90 years or more with intertrochanteric fractures admitted to Henan Provincial People's Hospital from January 2017 to June 2018. There were 12 males and 31 females, aged 90-102 years [(92.3±2.5)years]. A total of 31 patients were treated by PFNA (PFNA group) and 12 patients by bipolar hemiarthroplasty (hemiarthroplasty group). Comparisons were made between the two groups in terms of operation time, intraoperative blood loss, time of weight bearing after operation, rate of blood transfusion, incidence of complications 2 weeks and 3 months after operation, Harris score 12 months after operation and mortality 12 months after operation.Results:All patients were followed up for 1-30 months [(19.1±9.8)months] in PFNA group and for 0.5-29 months [(18.6±10.6)months] in hemiarthroplasty group. Operative time was (95.8±31.0)minutes in PFNA group, shorter than (128.8±40.5)minutes in hemiarthroplasty group ( P<0.05). Intraoperative blood loss was (71.3±25.7)ml in PFNA group and (212.5±113.1)ml in hemiarthroplasty group ( P<0.05). Time of weight bearing after operation was (43.9±31.9)days in PFNA group, longer than (5.9±2.8)days in hemiarthroplasty group ( P<0.05). The perioperative blood transfusion rate in PFNA group (29%) was less than hemiarthroplasty group (75%) ( P<0.05). Incidence of complications 2 weeks after operation was similar between PFNA group (23%) and hemiarthroplasty group (42%) ( P>0.05). Incidence of complications 3 months after operation in PFNA group was 26%, similar with 42% in hemiarthroplasty group ( P>0.05). Harris score 12 months after operation in PFNA group was (56.3±32.3)points, comparable to (59.3±36.7)points in hemiarthroplasty group ( P>0.05). Mortality rate 12 months after operation was 19% in PFNA group and 25% in hemiarthroplasty group ( P>0.05). Conclusion:For intertrochanteric fractures in elderly patients aged 90 years or more, PFNA and bipolar hemiarthroplasty are both effective treatments, but PFNA may be a better choice with shorter operation time and less intraoperative blood loss.
ABSTRACT
Objective To evaluate the clinical application of a three-dimensional (3D) printing personalized guide for medial open wedge high tibial osteotomy(MOWHTO) in the treatment of knee varus osteoarthritis.Methods A retrospective study was conducted of the 16 patients with knee varus osteoarthritis who had been treated at Department of Orthopaedics,Zhengzhou Central Hospital of Zhengzhou University from January 2016 to January 2017.They were 6 men and 10 women,aged from 49 to 65 years (mean,55.8 years).Bilateral knees were involved in 2 cases and a unilateral knee was involved in 14 cases.Their disease duration ranged from one to 12 years (mean,5.3 years).A personalized guide for MOWHTO was designed and manufactured by 3D printing for every patient preoperatively.All the patients underwent knee arthroscopy before osteotomy which was assisted by the personalized guide.The femorotibial angle (FTA),medial proximal tibial angle (MPTA),weight bearing line (WBL),posterior tibial slope (PTSA) and the patellofemoral height Insall-Salvati index (IS index) were measured on their X-ray radiographs preoperatively and 6 months postoperatively.The Hospital for Special Surgery (HSS) score and visual analogue scale (VAS) were used to evaluate the outcomes at the final follow-ups.Results All surgeries were successful.The 16 patients were followed up for 6 to 12 months (mean,9.1 months).The FTA,MPTA,WBL and IS index at postoperative 6 months were significantly improved than the preoperative values (P ＜ 0.05).There was no significant difference between postoperative PTSA and preoperative PTSA (P =0.990).The mean VAS scores for the 16 patients at the final follow-ups were 0.8 ± 0.7 peints,significantly better than the preoperative ones (4.2 ± 0.9 points) (P ＜ 0.05);their mean postoperative HSS scores (89.3 ± 6.7 points) were also significantly improved than the preoperative ones (61.9 ± 10.5 points) (P ＜ 0.05).According to the HSS scores at the final follow-ups,the surgical outcomes were excellent in 14 knees,good in 3 and fair in one.Conclusion A 3D printed osteotomy guide can be used to perform precise osteotomy in MOWHTO for knee varus osteoarthritis,leading to effective correction of the alignment of the lower limb and good short-term surgical outcomes.
ABSTRACT
Periprosthetic joint infection ( PJI), defined as infection involving the joint prosthesis and adjacent tissue, is one of the most serious complications associated with joint arthroplasty.Its accurate diagnosis is still a challenge confronted by arthroplasty surgeons.In this article, we summarize the latest progress on the serological , synovial fluid, microbiologic, histopathological and radiological diagnosis of PJI to provide new concepts for arthroplasty surgeons.
ABSTRACT
Objective To investigate the clinical effects of subemergency treatment of femoral intertrochanteric fractures in elderly patients.Methods From June 2013 through February 2014,47 patients older than 65 years were treated for femoral intertrochanteric fracture at our department and completed full follow-ups.Of them,20 received subemergency operation.They were 9 men and 11 women,with an average age of 72.2 ± 4.8 years.By the Evans-Jensen classification,there were 2 cases of type Ⅰ,5 of type Ⅱ,5 of type Ⅲ,5 of type Ⅳ,and 3 of type Ⅴ.The time from injury to surgery ranged from 0.5 to 1.7 days (average,0.8 days).The other 27 patients underwent selective operation.They were 11 men and 16 women,with an average age of 74.9 ± 5.7 years.By the Evans-Jensen classification,there were 3 cases of type Ⅰ,6 of type Ⅱ,6 of type Ⅲ,7 of type Ⅳ,and 5 of type Ⅴ.The time from injury to surgery ranged from 2 to 5 days (average,3.4 days).We compared the 2 groups in terms of in-hospital complications,fracture healing time,length of hospital stay,and hip scores at the last follow-up.Results All the patients were followed up for 12 to 15 months (mean,13.4 months).The rate of in-hospital complications in the subemergency operation group (35.0％,7/20) was significantly lower than that in the selective operation group (51.9％,14/27),and the length of hospital stay in the former (12.1 ± 1.6 days) was significantly shorter than in the latter (16.1 ± 1.8 days) (P ＜ 0.05).There was no significant difference between the 2 groups in fracture healing time (13.1 ± 1.8 weeks versus 13.6 ± 1.2 weeks) (P ＞ 0.05).According to the hip scores at the last follow-up,the subemergency operation group had 16 excellent,2 good,one fair and one poor cases (with an excellent to good rate of 90.0％) while the selective operation group had 21 excellent,2 good,2 fair and 2 poor cases (with an excellent to good rate of 85.2％),showing no significant difference between groups (P ＞ 0.05).Conclusion Subemergency operation can reduce not only in-hospital complications but also length of hospital stay for old patients with femoral intertrochanteric fracture.
ABSTRACT
Objective To compared different fixation methods for acetabular fractures involving the quadrilateral plate using a finite element model of the acetabulum.Methods A model of acetabular fractures with quadrilateral plate involved was developed in the finite element software and processed in Hypermesh V10.0 to generate internal fixation with dual-column titanium plate (Group A),anterior special titanium moulding plate plus quadrilateral screws (Group B),and anterior special titanium moulding plate plus quadrilateral screws combined with posterior column screws (Group C).Pelvic stress in sitting and standing positions were simulated in sequence with constraint of tuber nodes and inferior femur.Maximum stress and displacement of the acetabulum and displacement of nodes on fracture lines were measured after a force of 600 N was applied to S1 verterbrae in line with the direction of gravity in sitting and standing positions.Results In sitting position,the maximum stress and displacement of the acetabulum exhibited a sequence of Group C (9.47,1.08) ＜ Group B (19.84,1.11) ＜ Group A (29.73,1.14).Moreover,the same result was found in standing position with Group C (9.62,1.09) ＜ Group B (12.18,1.10) ＜ Group A (13.28,1.13).Mean displacement of nodes on fracture lines ranked in order of Group C ＜ Group B ＜ Group A (P ＞ 0.05).Conclusions The finite element model can reflect the distribution of pelvic stress effectively.Anterior special titanium moulding plate plus quadrilateral screws combined with posterior column screws provide favorable biomechanical stability in treatment of acetabular fractures involving the quadrilateral area.
ABSTRACT
Objective To explore the effect of microsurgery for refractory temporal lobe epilepsy . Methods A retrospective analysis was made in 102 patients with refractory temporal lobe epilepsy from January 2005 to December 2011.The patients received comprehensive preoperative localization , intraoperative frontotemporal pterional incision , and microsurgical resection of epileptogenic focus .The efficacy was evaluated according to the Engel standards .Indications such as self-care ability, learning ability, and working ability were used to evaluate the quality of life , which were recorded and compared before and after operation . Results Follow-up was accomplished in all the 102 cases for a duration of 1 year and 9 months to 7 years.There were no mortality and serious complications .The effects evaluations at 1 year after operation showed complete disappearance of symptoms ( levelⅠ) in 61 cases (59.8%), almost disappearance (level Ⅱ) in 17 cases (16.7%), symptoms improvement more than 75% (level Ⅲ) in 13 cases (12.7%),and ineffective (level Ⅳ) in 11 cases (10.8%), bearing an effective rate of 89.2% (91/102) and a good-and-excellent rate of 76.5%(78/102).At one year and nine months postoperatively , 6 patients could not take care of themselves , 32 patients obtained partial self-care, and 64 patients had complete self-care,as compared with which there were 21 patients, 67 patients, and 14 patients preoperatively, respectively, having significant differences before and after surgery (Z =-7.001, P =0.000). Statistical significances were obtained before and after operation in 67 cases of children and adolescents with learning ability ( Z=-3.747, P =0.000) and in 35 adult cases with working ability ( Z =-2.564, P =0.010). Conclusions Microsurgical treatment is an effective method for refractory temporal lobe epilepsy .Patients ’ quality of life can get significant improvement after surgery.
ABSTRACT
Objective To evaluate the recent clinical outcomes of fixing posterior acetabular wall fractures combining the AO mini plate with reconstruction plate.Methods From Jan 2009 to Jul 2013,28 patients with posterior acetabular wall fracture were fixed by the AO mini-steel plate combined with reconstruction plate,including 17males and 11 females with the mean age of 45.8 years (range,18-65).After admission,reduce the dislocation of hip joint immediately,and take femoral condyle or tibial tubercle traction.Preoperative and postoperative anteroposterior and Judet oblique radiographs,acetabular CT scan and three-dimensional reconstruction imaging were routine taken.Using Kocher-Langenbeck approach,intraoperative,try to protect the soft tissue attached on the small fragments,and reduct the fracture.Cutting the mini plate into proper length with reconstruction plate fix to its surface crossover.The functional outcomes were evaluated by the modified Merle d'Aubigné and Postel clinical grading system.The radiographs were graded according to the Matta/Judet criteria.Results Twenty-three patients are followed up 13 months(82.2％),and 5 cases lost in 12 weeks (17.8％).By the Matta/Judet criteria,22 cases achieved excellent reduction,4 good reduction and two fair reduction,with a good and excellent rate of 92.8％.By the modified Merle d'Aubigné and Postel criteria,functional recovery of the affected hip six month post-operation was rated as excellent in 15 cases,good in 5 cases,fair in 2 cases and poor in one case.with a good and excellent rate of 87.9％.One case occurred femoral head necrosis.In 2 patients 2 years after surgery developed traumatic arthritis.Two patients had heterotopic ossification after six month operation.One patient with injury to the sciatic nerve recovered 3 months post-operation.Conclusion Using the AO mini plate combined with reconstruction plate can fix the acetabular posterior wall fractures stably.The technique meet the requirements of patients with early functional exercise,which provides an effective method of internal fixation.
ABSTRACT
Five hundred and nineteen patients with essential hypertension from 6 community health centers in Baoshan Distract of Shanghai were enrolled in the program,all patients received direct or indirect comprehensive interventions.These interventions were conducted by doctors from tertiary hospitals and community health serwice centers.Among these hyperpietic,462 patients were followed-up for 1 year.After interventions,the awareness rate of hypertension was significantly increased,unhealthy life styles were changed; blood pressure control rate and risk factors control rate were also increased; carotid-femoral artery pulse wave velocity and carotid-radial artery pulse wave velocity were decreased (P ＜ 0.01 or P ＜ 0.05).The results indicate that comprehensive interventions organized by tertiary hospitals with community health centers are effectivc in managcmcnt of hypcrtension.
ABSTRACT
Aim To establish an ideal hyperlipidemia animal model by a new way.Methods 30 mice were randomly divided into control group, positive control group and model group.The mice of control group were only fed with a standard diet.Those of positive control group were fed with high fat diet.Those of model group were fed with a standard diet and enough milk.After 30 days the TG, TC, HDL-C and LDL-C of serum and hepatic and LI were detected and pathological changes in the liver of mice were observed microscopically.Results Compared with the control group, the mice of model group developed hyperlipidemia with LI and the serum and the hepatic TG, TC, LDL-C elevated significantly, while HDL-C were significantly lower.The histopathological research showed hepatocellular macrovesicular steatosis and hepatitis in the model group.Conclusion An ideal model of hyperlipidemia is successfully established with standard diet and milk fed to mice for 30 days.
ABSTRACT
<p><b>OBJECTIVE</b>To study the chemical constituents of Buddleja albiflora.</p><p><b>METHOD</b>The constituents were isolated by column chromatography and their structures were elucidated by spectroscopic methods.</p><p><b>RESULT</b>Eleven compounds were isolated and identified as luteolin (1), quercetin (2), quercetin-3-O-beta-D-glucopyranoside (3), apigenin (4), apigenin-7-O-beta-D-glucopyranoside (5), apigenin-7-O-neohesperidoside (6), acacetin-7-O-beta-L-rhamnopyranosyl-(1-6)-beta-D-glucopyranoside (7), cranioside A (8), acetylmartynoside B (9), 4"-O-acetylmartynoside (10), isomartynoside (11).</p><p><b>CONCLUSION</b>All these compounds were obtained from B. albiflora for the first time and compound 8 was obtained from the genus Buddleja for the first time.</p>
Subject(s)
Buddleja , Chemistry , Plant ExtractsABSTRACT
Objective: To explore the mechanism of traditional Chinese medicine(TCM) combined with regular therapy in the treatment of pneumonia with systemic inflammatory response syndrome(SIRS) in(children).Methods: Sixty-four children with pneumonia including 51 cases with SIRS complication were(randomly) divided into three groups: treatment group(regular therapy+TCM,n=26),control group Ⅰ((regular)(therapy) only,n=25) and the control groups Ⅱ(13 pneumonia children without SIRS(receiving)(routine) treatment). The dynamic changes of tumor necrosis factor-?(TNF-?),interleukin-6(IL-6) and IL-8 were measured before and after treatment in all children.Serum Creactive protein(CRP) and total white blood cell(WBC) count were measured simultaneously.Clinical symptom and sign scores were(performed)(5 days) after treatment in children with pneumonia and SIRS complication.Results: Before(treatment),serum TNF-?,IL-6,IL-8 and CRP concentrations were significantly higher in treatment group and(control) group Ⅰ than(control) group Ⅱ(all P