ABSTRACT
In this work,a high performance liquid chromatography-ultraviolet( HPLC-UV) detection technology was used to establish fingerprint analysis method for Sanye Tangzhiqing Decoction following an analytical quality by design( AQb D) approach. Firstly,column temperature,flow rate,and gradient elution conditions were determined as the method parameters needing to be optimized. Then according to the results of definitive screening design,three critical method attributes( CMAs) were identified,including peak number,the percentage of common peak area to total peak area,and retention time of the last peak. A stepwise regression method was used then to build quantitative models between CMAs and method parameters. Probability-based design space was calculated and successfully verified using the experimental error simulation method. After the analysis conditions were optimized,the contents of six components,namely chlorogenic acid,paeoniflorin,rutin,hyperoside,quercetin-3-O-β-D-glucuronide,and salvianolic acid B were simultaneously determined. There were 19 common peaks in the fingerprint and their common peak area accounted for 96% of the total peak area. Both fingerprint and quantitative analysis methods were validated applicable in methodology study,and they can be applied to determine new samples.
Subject(s)
Chlorogenic Acid , Chromatography, High Pressure Liquid , Drugs, Chinese HerbalABSTRACT
The paper-based analytical device (PAD) was applied in this study to analyze the antioxidant activity of Danhong injection and its intermediates. First polycaprolactone was printed on the surface of a filter paper with a 3D printing device. The modified filter paper was then prepared using polycaprolactone and solid paraffin as the modifiers. The PAD was prepared after adding DPPH ethanol solution to the modified filter paper. Ascorbic acid solutions with different concentrations were used as the positive drug on PAD. After the occurrence of color reactions, the PAD was dried, and the data of color were collected by a cell phone. The color component G and grayscale were selected as the potential indices for measurement according to the values of determination coefficients, detection limits, and effective number of digits. Qualitative and quantitative analysis of Danhong injection and the concentrate of aqueous extract were realized with the PAD. Because no significant differences were observed between the results obtained using the two potential indices, the average values of these two were used for analysis, and the antioxidant activity of Danhong injection and the concentrate of aqueous extract was equivalent to ascorbic acid solutions of 3.7, 46 g·L⁻¹, respectively. The PAD method presented in this work can be a simple method to determine biological activities of Chinese medicines and their intermediates.
ABSTRACT
In this work, two algorithms (overlapping method and the probability-based method) for design space calculation were compared by using the data collected from extraction process of Codonopsis Radix as an example. In the probability-based method, experimental error was simulated to calculate the probability of reaching the standard. The effects of several parameters on the calculated design space were studied, including simulation number, step length, and the acceptable probability threshold. For the extraction process of Codonopsis Radix, 10 000 times of simulation and 0.02 for the calculation step length can lead to a satisfactory design space. In general, the overlapping method is easy to understand, and can be realized by several kinds of commercial software without coding programs, but the reliability of the process evaluation indexes when operating in the design space is not indicated. Probability-based method is complex in calculation, but can provide the reliability to ensure that the process indexes can reach the standard within the acceptable probability threshold. In addition, there is no probability mutation in the edge of design space by probability-based method. Therefore, probability-based method is recommended for design space calculation.