The rehabilitation of an edentulous maxilla with an implant-supported fixed prosthesis using a zirconia framework: A case report / 대한치과보철학회지

Anatomical changes in the facial and alveolar bones occur after multiple teeth are extracted. In the maxilla, the alveolar bone is absorbed in the direction and inclination of the root, and the remaining alveolar bone becomes shorter, reducing the diameter of the arch. In addition, as the nasolabial angle increases, the support of the lips and the aesthetics of the face are lost. This case reports a functional and aesthetically satisfactory results of full mouth rehabilitation with the implant-supported fixed prosthesis using a zirconia framework.

DMLS (Direct Metal Laser Sintering) denture repair technique for a removable partial denture: A case report / 대한치과보철학회지

In recent years, digital technology has been developed in dentistry, which denture frameworks can be manufactured using DMLS (Direct Metal Laser Sintering) technique. A traditional impression method can be replaced by oral scanning and wax pattern production process can be achieved by the use of CAD/CAM techniques. The designed STL files can be sent to DMLS devices to fabricate final components of removable partial dentures (RPD). The advantages of digital dentistry are concision and precision. In this case study, a fracture of occlusal rests providing support and indirect retention was repaired by DMLS and laser welding techniques. It shows satisfactory results in adaptation accuracy and functional properties of the repaired denture.

Analysis on mandibular movement using the JT-3D system

Purpose@#This study aims to measure the mandibular movement using JT-3D system and provide a range of mandibular movement that can serve as a good reference for diagnosing the temporomandibular disorder. @*Materials and Methods@#This study was conducted in 60 young male and female adults. The maximum opening and closing movement was recorded using JT-3D system, and by regarding 5 times of repetitive movement as 1 cycle of movement, total 3 cycles of movement were recorded. During the maximum opening, vertical position of lower jaw, antero-posterior position, lateral deflection position, and maximum opening distance were recorded. To evaluate the reproducibility of JT-3D system, statistical analysis were conducted (α = 0.05). @*Results@#During the maximum opening, the average value appeared at 31.56 mm vertically and 24.42 mm rearwardly, lateral deflection position 0.72 mm, and maximum opening distance 40.32 mm. There was no statistical significance in all measured values for three cycles of movement recorded with JT-3D system (P > 0.05). @*Conclusion@#During the maximum opening, the average value appeared at 0.72 mm in lateral deflection position and the maximum opening distance at 40.32 mm, and the analysis on the maximum opening of lower jaw using JT-3D system showed sufficiently reproducible results.

A study on the occlusal wear patterns in maxillary posterior teeth with palatal side abfractions

PURPOSE: Aims to analyze the occlusal wear patterns in maxillary posterior teeth with palatal side abfractions and study the association between occlusal force and abfractions. MATERIALS AND METHODS: This study was conducted in a total of 308 teeth from 148 patients with palatal side abfractions in maxillary posterior teeth. The occlusal wears in maxillary premolars and molars with palatal side abfractions were classified and recorded. The classification was done by type of teeth, age, and gender, and in order to evaluate the statistical significance between groups, chi-square test was conducted (α = 0.05). RESULTS: Palatal side abfractions in maxillary posterior teeth were observed at the highest frequency in the 1st molars, and in all teeth with palatal side abfractions, more than one occlusal wear was observed. In classification by type of teeth, by age, and by gender, the occlusal wears in teeth with palatal side abfractions were observed at high frequency in cuspal inclined plane, central fossa, and marginal ridge, and there was a statistical significance (P < 0.05). CONCLUSION: Palatal side abfractions were observed at the highest frequency in maxillary 1st molars, and in all maxillary posterior teeth where palatal side abfractions were found, the occlusal wears were observed. And the occlusal wears were observed at high frequency in cuspal inclined plane, central fossa and marginal ridge. Such results show that abfraction is associated with occlusal force.

A study of incidence of palatal side abfractions in maxillary posterior teeth

PURPOSE@#Most of studies dealing with abfractions are limited to the buccal surfaces of the teeth. In this study, we analyzed the cause for abfraction by investigating the incidence of palatal side abfractions in maxillary posterior teeth.@*MATERIALS AND METHODS@#We investigated a total of 3193 maxillary posterior teeth by an intraoral examination, model observation, and observation of virtual model fabricated using model scanning. We recorded the results and classified them depending on the type of teeth, age, gender, and side of arches. We also performed Chi-square test to evaluate the statistical significance among the groups (α = 0.05).@*RESULTS@#The incidence of palatal side abfraction of the maxillary molars (10.8%) was higher than the premolars (6.8%), and among them, the incidence of the 1st molars (39.1%) were the highest. The incidence of palatal side abfraction increased with age and was statistically significant (P 0.05); in the case of arches, left arch showed higher incidence and it was statistically significant (P < 0.05).@*CONCLUSION@#Palatal side abfraction in maxillary posterior teeth was frequently observed in the maxillary 1st molars, and the incidence increased with age. This result suggests that the main reason for abfraction is due to occlusal force.

An occlusal contact analysis of lateral mandibular movement using T-Scan system / 대한치과보철학회지

PURPOSE: Most of the former studies about the occlusal contact patterns during the mandibular movement focused on foreigner. The purpose of this study is analyzing the occlusal contacts of young Koreans by using T-Scan system. MATERIALS AND METHODS: The sample size was 87 and the occlusal contacts of each right and left lateral movements were measured from the maximum intercuspation to the 3mm excursive position for three times respectively. All of the occlusal contacts were double checked through the thin metal foil. The results were categorized as two; 1) considering occlusal contact patterns on working side only, 2) considering occlusal contact patterns on working and nonworking sides. RESULTS: The results showed that the nonworking side occlusal contacts play major roles in the lateral mandibular movement. In both cases of considering with and without the nonworking side occlusal contacts, the group function was the most prevalent. In the working side, the contacts were the most frequent in canine and the frequency of contacts was decreased as the distance was increased from canine to molar. In the nonworking side, the contacts were the most frequent in second molar. And the gender factor was statistically significant (alpha=.05), as females have more nonworking side occlusal contacts in this study. CONCLUSION: Among the three factors of anterior guidance, the group function was the most dominant factor. The analysis of 87 samples showed that canine contact was the most frequent in the working side and second molar contact was the most common in the nonworking side.

A comparative study on crowding according to the status of the third molars in mandibular arch / 대한치과교정학회지

It has been generally believed that the impaction or eruption of mandibular third molars has significant correlations with the growth of the mandible, size of mandibular arch and size of teeth. The purpose of this study was to examine if there is any correlation between the status of eruption of mandibular third molars and the amount of mandibular crowding. The effect of missing of third moalrs to mandibular crowding was studied as well. 140 adult students of Yonsei University were selected and divided into three groups according to the status of mandibular third molars, Group 1) congenital missing group, Group 2) eruption group, and Group 3) impaction group. The tooth size, dimensions of the mandibular dental arch, and the amount of crowding were measured and compared. Results were as follows; 1. There was no statistically significant difference in tooth size between the missing group and the eruption group(p<0.05). Impaction group showed larger total tooth material, incisal tooth material, and individual tooth size except central incisors compared to missing group (p<0.05). Impaction group showed larger total tooth material, incisal tooth material compared to eruption group as well(p<0.05). When individual tooth size was compared, impaction group had larger central incisors, canines, and second premolars than eruption group(p<0.05). 2. Missing group showed larger intermolar width than impaction group and it was statistically significant(p<0.05). 3. When compared the amount of total crowding, impaction group showed the largest amount of crowding, then eruption group, and missing group showed the least amount of crowding respectively(p<0.05). There was no statistically significant difference between missing group and eruption group in the amount of incisal crowding (p<0.05). Impaction group showed the largest amount of incisal crowding among all three groups(p<0.05).