ABSTRACT
To evaluate the shear bond strength of a recent adhesive system used in the cementation of zirconia.Material and Methods:Overall, 72 zirconia specimens (Zirconzhan) were divided and randomized into 3 groups according to the type of surface treatment: G1 no treatment + adhesive system; G2 blasted with aluminum oxide + adhesive system and G3 tribochemical treatment (Rocatec Plus) + adhesive system. Half of each group (n = 12) had bond strength evaluated on two occasions: 24 hours after cementation, kept stored in distilled water at 37 ° C without thermal cycling, and after thermal cycling (5000 cycles, 5°C-55°C). Data were analyzed by ANOVA with Tukey's post-test (α≤0.05).Results:At first moment, G1 and G3 showed higher bond strength (8.64 ± 3.43 MPa and 6.55 ± 2.27 MPa) compared to G2, with no statistically significant difference between them. After thermal cycling, G3 showed higher bond strength (7.70 ± 1.82 MPa).Conclusion:Initially, only the adhesive system promoted higher bond strength, but after thermal cycling,bond strength decreased. The best treatment to promote high bond strength to zirconia is to associate tribochemical treatment with the adhesive system; most failures observed after thermal cycling were mixed and cohesive, showing a mechanical imbrication of the adhesive system, suggesting that there is no chemical bond; and the surface of the group with greater bond strength after thermal cycling showed more surface irregularities compared to the other groups...