ABSTRACT
Introduction: The success of implant-supported prostheses is related to the passive union between the prostheses’ connections and the implants, so it is necessary to obtain an accurate working cast. Objective: To evaluate the accuracy of the transfer impressions of implants performed with individual acrylic resin trays and conventional trays using polyvinyl siloxane. Material and methods: To carry out the transfer impressions, a master cast with four external hexagon implants parallel to each other was used. Five impressions were made with individual acrylic resin trays and five other impressions with modified conventional trays, opened in the region of the implants. The linear measurements between the implants were made with a digital caliper with an accuracy of 0.01 mm and the results were statistically evaluated (alpha = %). Results: For the points AB and BC, the measurements obtained with the individual trays were statistically similar to the master cast. For the points CD and DA no statistical differences among the three groups were observed. Conclusion: Given the obtained results and the methodology used, it can be concluded that the impressions performed with individual trays presented higher accuracy compared to the ones obtained with conventional trays.
ABSTRACT
Introdução: As cerâmicas são consideradas uma excelente alternativa como material estético restaurador, entretanto questões relevantes, como adaptação marginal, exigem um maior critério na confecção quando comparadas aos sistemas convencionais. Objetivo: Este trabalho avaliou a adaptação marginal de uma coroa In-Ceram confeccionada sobre um dente que, após 3 anos, teve sua extração indicada pela ortodontia. Material e métodos: A avaliação deu-se por meio de microscópio eletrônico de varredura. Resultados e conclusão: Foram encontrados valores de falta de adaptação entre 157 e 390 um, obtendo uma média estatística acima do considerado aceitável clinicamente pela literatura.
Introduction: Ceramics are considered an excellent choice as esthetic restorative material, but relevant questions like marginal fit require more attention in manufacturing than conventional systems. Objective: This work evaluated the marginal adaptation of an In-Ceram crown over a tooth that, after three years, had been indicated to extraction by orthodontics. Material and methods: The evaluation was by mean scanning electron microscope. Results and conclusion: It was found values of gaps between 157 and 390 um, getting a statistic average considered greater than the accepted by literature.