ABSTRACT
Objective:To develop a national secondary reference material of Urea and Creatinine in frozen human serum as a standard for metrological traceability.Methods:According to JJF1343-2012 "General and Statistical Principles for Characterization of Reference Materials" and JJF 1006-1994 " Technical Norm of Primary Reference Material ", the homogeneity, stability, and commutability were evaluated;Using the JCTLM recommended methods, the value of the reference materials was assigned through collaboration with 6 accredited reference laboratories from Guangdong Provincial Hospital of Chinese Medicine, Beijing Aerospace General Hospital, Shenzhen Mindray Bio-Medical Electronics, Maccura Biotechnology, Beijing Leadman Biochemistry, and Zhejiang MedicalSystem Biotechnology. Uncertainty components including inhomogeneity, stability and value assignment were evaluated.Results:The results of one-way analysis of variance of homogeneity for the reference materials showed P>0.05, and the stability evaluation was less than the critical value of the t-test. The measured values were in the 95% confidence interval in the four conventional detection systems for commutability, and the certified values and expanded uncertainties were urea:(14.7±0.3) mmol/L ( k=2),Cr:(313.9±14.5) μmol/L ( k=2). Conclusion:The prepared secondary reference materials of urea and creatinine had promising homogeneity, stability, and commutable, the values of urea and creatinine concentration in reference materials were accurate and reliable.
ABSTRACT
Objective:To establish a candidate reference method for serum progesterone using isotope dilution liquid chromatography tandem mass spectrometry (ID-LC/MS/MS) in our laboratory, validate the analytic performance of five clinical routine detection systems to explore the comparability of serum progesterone detection by different detection systems.Methods:A candidate reference method for serum progesterone using ID-LC/MS/MS method was established. The sample was pretreated by liquid-liquid extraction method, and the reversed phase liquid phase separation in positive ion mass spectrometry mode was used to detect progesterone in human serum, and the detection time of a single sample was controlled within 5 minutes by gradient elution. In order to improve the accuracy of the method, the bracketing calibration method (BCM) was used to establish the standard curve. The sensitivity, accuracy, precision and specificity of BCM and classical calibration curve method were evaluated according to CLSI C62-A, EP15-A2, EP6-A2 and EP9-A3, and the analytical performance and comparability of five clinical routine progesterone detection systems were evaluated,compared with ID-LC/MS/MS method, the bias at medical decision level 2 and 25 ng/ml was evaluated to see if they were <1/2TEa (12.5%).Results:The limit of detection (LOD) of ID-LC/MS/MS was 0.005 ng/ml. The recoveries of BCM method and classical calibration curve method are 97.95%-101.58% and 96.88%-110.70%, respectively. The measurement results of BCM method for certified reference materials are within its declared uncertainty range. The intra-and inter-assay coefficient of variation ( CV) of BCM method was less than 3.0%, which was better than that of classical calibration curve method ( CV: 2.48%-9.33%). The precision and linear range of the five clinical routine detection systems can meet the detection requirements. The measurement bias of detection system 1, 3 and 5 at 25 ng/ml of medical decision level was less than 1/2TEa, and the measurement bias at 2 ng/ml of medical decision level was more than 1/2TEa. The measurement bias of detection system 2 and 4 at two medical decision levels was less than 1/2TEa. Conclusion:The candidate reference method for serum progesterone ID-LC/MS/MS established in our laboratory meets the requirements of the reference method. BCM has better detection performance than classical calibration curve method. The precision and linearity of the five progesterone clinical detection systems are satisfactory. The five clinical detection systems could meet the clinical requirements at the medical determination level of 25 ng/ml, however, only two of the five clinical detection systems meet the clinical requirements at the medical determination level of 2 ng/ml.
ABSTRACT
The concentration and accumulation rate of advanced glycation end products (AGEs) in the body are highly correlated with glycometabolic disorders. Therefore, the clinical detection of AGEs is of great value for the early diagnosis and prognostic evaluation of these diseases. However, due to the complexity of its structure, the diversity of glycosylation sites, and the limitations of existing detection methods, there is still a lack of widely available detection methods in clinical practice. Starting from the structure and classification of AGEs and the value of clinical testing, this article summarizes current status of various laboratory detection methods of AGEs, and the deficiencies and challenges of these testing methods, future directions are further prospected.
ABSTRACT
The performance of high sensitivity, specificity and throughput makes liquid chromatography-tandem mass spectrometry (LC-MS/MS) quickly developed and well applicated in clinical laboratories, such as quantitative detection of steroids, vitamins and metabolic small molecules, monitoring drug concertrations as well as the establishing reference methods or verifying reference materials. However, there were still some challenges for the widespread clinical application of LC-MS/MS.
ABSTRACT
There are many types of serum tumor markers,and their structures and functions vary.The standardization and harmonization of serum tumor markers will contribute to clinical diagnosis and treatment.Therefore,many scholars are committed to the research of their standardization.However,there are only a few items have been standardized.Due to the complexity of determination,most tumor markers are still facing problems and challenges in the process of achieving standardization.
ABSTRACT
Renal function test items mainly include creatinine, urea, uric acid, cystatin C, urine-alb, urine protein, α1-microglobulin, β2-macroglobulin and retinol binding protein, etc.The standardization and harmonization of these renal function test items will contribute to clinical diagnosis and treatment.Therefore, many scholars are committed to the standardization of renal function tests and part of these testshave been standardized.But some test items, due to the complexity of the determination, the process of achieving standardization are still facing some problems and challenges.