ABSTRACT
Objective: Endodontic perforation is a challenging mishap that should be repaired with a biocompatible material, Mineral trioxide aggregate (MTA) and Biodentine are the most commonly used repair materials. However, these materials are expensive, (MTA) has prolonged setting time and difficult manipulation. The purpose of this study is to prepare the experimental nano calcium-aluminate/tri-calcium-silicate (CA/C3S) material and comparing its physical properties with biodentine and MTA, to evaluate the experimental material eligibility to compete the commercial repair materials. And to perform part two (animal study) that will evaluate the cytotoxicity, the biocompatibility and the efficacy of (CA/C3S) in furcal perforation repair compared to diode laser. Material and Methods: A mixture of calcium carbonate and aluminum oxide was used to formulate calcium aluminate phase (CA), tri-calcium-Silicate phase (C3S) was formulated by firing of calcium carbonate and quartz. The produced powders were investigated by X-ray diffraction, then (CA) and (C3S) mixed with water.(CA/ C3S) compared with MTA and biodentine for setting-time, micro-hardness, dimensional-stability and solubility. Results: Mean setting time of (CA/C3S) was (32.70±0.75min) which is significantly higher than MTA and Biodentine. The Mean microhardness of (CA/C3S) was (56.50±7.41VHN) which has no statical difference with MTA and Biodentine. Solubility results showed weight increase for (CA/C3S) as following (6.29±3.05)and loss of weight for MTA and Biodentine. The percentage of change in dimensions for(CA/C3S) increased as following (0.64±0.78) while decreased for MTA and Biodentine. Conclusion: The experimental (CA/C3S) material showed good microhardness, dimensional stability and acceptable setting time that could be improved in further work (AU)
Objetivo: A perfuração endodôntica é um percalço desafiador que deve ser reparado com um material biocompatível, Agregado de trióxido mineral (MTA) e Biodentina são os materiais de reparo mais comumente usados. No entanto, esses materiais são caros, (MTA) tem tempo de presa prolongado e difícil manipulação. O objetivo deste estudo é preparar o material experimental de nano aluminato de cálcio/silicato tricálcico (CA/C3S) e comparar suas propriedades físicas com biodentina e MTA, para avaliar a elegibilidade do material experimental para competir com os materiais de reparo comerciais. E realizar a segunda parte (estudo animal) que avaliará a citotoxicidade, a biocompatibilidade e a eficácia do (CA/C3S) no reparo de perfuração de furca em comparação ao laser de diodo.Material e Métodos: Uma mistura de carbonato de cálcio e óxido de alumínio foi usada para formular a fase de aluminato de cálcio (CA), a fase tri-cálcio-silicato (C3S) foi formulada por queima de carbonato de cálcio e quartzo. Os pós produzidos foram investigados por difração de raios X, em seguida (CA) e (C3S) misturados com água. (CA/ C3S) comparados com MTA e biodentina para tempo de presa, microdureza, estabilidade dimensional e solubilidade. Resultados: O tempo médio de presa de (CA/C3S) foi (32,70±0,75min) que é significativamente maior que MTA e Biodentine. A microdureza média de (CA/C3S) foi (56,50±7,41VHN) que não tem diferença estática com MTA e Biodentine. Os resultados de solubilidade mostraram aumento de peso para (CA/C3S) conforme a seguir (6,29±3,05) e perda de peso para MTA e Biodentine. A porcentagem de mudança nas dimensões para (CA/C3S) aumentou como segue (0,64±0,78), enquanto diminuiu para MTA e Biodentine. Conclusão: O material experimental (CA/C3S) apresentou boa microdureza, estabilidade dimensional e aceitável tempo de presa, que pode ser melhorado em trabalhos futuros (AU)
Subject(s)
X-Ray Diffraction , Biocompatible Materials , Calcium Carbonate , Lasers, Solid-State , Aluminum OxideABSTRACT
The phytochemical investigation of the aerial parts of Astragalus annularis Forssk. and A. trimestris L., Fabaceae, growing in Egypt, resulted in the isolation of eight compounds, for the first time from these two species. These compounds were identified by chemical methods, NMR spectroscopy, UV spectroscopy as well as MS analysis. The antimicrobial activity of the isolated compounds were tested against Staphylococcus aureus, Esherichia coli and Candida albicans.
A investigação química das partes aéreas de Astragalus annularis Forssk. e A. trimestris L., Fabaceae, do Egito, resultou no isolamento de oito compostos, pela primeira vez nestas duas espécies. Estes compostos foram identificados por métodos químicos, espectroscopia de RMN, espectroscopia UV, bem como análise de EM. A atividade antimicrobiana dos compostos isolados foi testada contra Staphylococcus aureus, Escherichia coli e Candida albicans.
ABSTRACT
Six patients with heterozygous familial hypercholesterolemia [FH] [age range 49-59 years] and 10 healthy controls were studied. Diagnosis of FH in this group of patients upon the presence of a history of ischemic heart disease [IHD] started at an early age, tendon xanthoma, strong family history of IHD and raised plasma total cholesterol above 386 mg/dL and low density lipoprotein cholesterol [LDLc] above 190 mg/L. All patients were refractory to diet and drug treatment. Plasma exchange [PE] on seven separate occasions reduced significantly the level of LDL-c with a rise in HDL-c during the first two hours of PE, and reached the baseline in 3 days. However, long term PE, after several weeks does not normalize the level of HDL-c. Using selective LDL-c filtration procedure, in which LDL-c fraction was removed by membrane filtration over a poly alcohol filter, LDL-c was reduced by about 50% and HDL-c was increased by about 60%. Both PE and selective filtration are successful methods of treatment of heterozygous FH