Color evaluation of white spot lesions treated with resin infiltration after water or grape juice storage

Aim: To evaluate the color stability of bovine enamel with artificial white spot lesions treated with resin infiltration (ICON) or remineralization with fluoride using two storage methods. Methods: Sixty incisors were submitted to artificial white spot lesion induced by demineralization-remineralization (DE-RE) cycling. Initial color was evaluated with CIE-Lab to measure ΔEab. Demineralized teeth were divided according to the treatment of the white spot lesion (n = 20): 1) Remineralization with 2% neutral fluoride gel for 4min (control); 2) ICON application following manufacturer's recommendations; and 3) ICON with decreased drying time after the application of ethanol. After 24h, color was evaluated and samples were subdivided (n = 10) according to storage: 1) distilled water for 1 month; 2) grape juice for 10min daily. After storage, color was evaluated. L*, a* and b* data were analyzed by one-way ANOVA and ∆Eab data by two-way ANOVA followed by Tukey's HSD (α = 0.05). Results: L* was affected by juice storage, and decreased when ICON was applied with decreased drying time after the ethanol application. The same behavior occurred with a* (increase with reduced drying time), while b* was not affected. For ∆Eab significant differences were observed between groups (p = 0.0219) and storage methods (p = 0.0007). There was no interaction effect (p = 0.1118). Remineralization with fluoride presented the lowest color changes after storage in water. Conclusion: Treatment of artificial carious lesions with resin infiltration presented greater color changes than fluoride remineralization after storage in both solutions in vitro

Assessment of a conservative approach for restoration of extensively destroyed posterior teeth

Abstract Extensive restorations in posterior teeth always bring doubts to the clinicians regarding the best protocol, mainly when structures of reinforcement were lost. Objective This study aimed to evaluate the effect of beveling on the fracture resistance and pattern of class II (MOD) restored teeth. Methodology Ninety human premolars were randomly assigned into 9 groups: CTR (control/sound); NC (cavity preparation, non-restored); RU (restored, unbeveled); RTB (restored, entire angle beveling); RPB (restored, partial/occlusal beveling); EC (endodontic access/EA, non-restored); EU (EA, unbeveled); ETB (EA, entire angle beveling); EPB (EA, partial/occlusal beveling). Teeth were restored with Esthet X resin composite and stored in distilled water for 24 h before the inclusion in PVC cylinders. The axial loading tests were performed with 500 kgF at 0.5 mm/min crosshead speed until fracture of the specimens. Fracture resistance and pattern were accessed and data were analyzed using one-way ANOVA and Tukey's HSD test (α=0.05). Results Mean (±SD) failure loads ranged from 136.56 (11.62) to 174.04 (43.5) kgF in the groups tested without endodontic access. For endodontically accessed teeth, fracture resistance ranged from 95.54 (13.05) to 126.51 (19.88) kgF. Beveling of the cavosurface angle promoted the highest fracture resistance values (p<0.05) and prevented catastrophic fractures. Conclusions Cavosurface angle beveling is capable of improving fracture resistance and pattern for both endodonticaly accessed and non-accessed teeth.

Remoção de pigmentação melânica gengival por meio de dermoabrasão û relato de caso / Elimination of gingival melanin pigmentation through dermabrasion û case report

A pigmentação melânica gengival é uma condição clínica mais prevalente em indivíduos da raça negra e oriental, consistindo frequentemente em um problema estético. Embora a recidiva seja imprevisível, vários tratamentos são propostos, entre eles a mucodermoabrasão com diferentes instrumentos. O objetivo do presente relato de caso clínico foi demonstrar duas técnicas para resolução desses casos: emprego dos gengivótomos e de uma ponta de cerâmica em alta rotação.

Gingival melanin pigmentation is a clinical condition, more prevalent in oriental and black people, and may generate esthetical problems. Despite the fact that recurrence is unpredictable, different treatments are proposed, such as epithelial abrasion with different instruments. The objective of the present case report is to show two different techniques for resolution of such cases: use of Kirkland periodontal knife, and abrasive ceramic burs in high speed.

A simplified restorative technique of fractured maxillary anterior teeth

Introduction: Fractures of the anterior teeth consists of a clinical condition that generates not only aesthetic and psychological problems, but may also cause dental pain. Thus, the affected teeth should be treated as urgencies in dental offices and their resolution whenever possible should be in a single session. Direct resin composite restorations should wherever possible be preferred due to the speed and possibility of obtaining good results. Objective: The objective of this case report is to describe the clinical sequence for restoration of a maxillary central incisor that presented a crown fracture using an immediate insert technique for resin composite (a "free hand" technique) with a modification to obtain dentin layer. Case report: A patient sought treatment after she fractured tooth #21. The restoration was performed with resin composite using the immediate technique. To facilitate the layering technique, the immediate insertion technique was changed for making the dentin lobes with the aid of a Teflon tape and the support with the index finger. Conclusion: The restoration of fractured anterior teeth can be performed quickly with the use of resin composites of different opacities and the use of the technique of immediate insertion proposed in this case report.

Degree of conversion of a flowable composite light-activated through ceramics of different shades and thicknesses

Abstract The cementation of thin ceramic veneers employing fluid light-activated resin-based materials is a common procedure in the dental practice. Aim: To evaluate the influence of ceramic thickness and shade on the degree of conversion (DC) of a flowable light-activated material. Methods: flowable resin composite (Tetric N-Flow - shade A1) was light-activated through ceramic discs of two shades (IPS Classic - A1 and A3) in three thicknesses (0.5, 0.7 and 1.0 mm). For control, the resin composite was light-activated without ceramic interposition. DC was evaluated by FTIR (n=5). Data were analyzed by one-way ANOVA and Dunnett's T3 test (α=0.05). Results: Statistically significant differences between groups were observed (p<0.001). Control group (without the interposition of ceramic) showed the highest mean for DC (71.9± 1.7). Considering the interposed ceramic disc groups, the highest DC values were obtained when 0.5 and 0.7 mm A1 ceramics were used (64.6±1.2 and 64.4 5.0, respectively) and the lowest DC values were obtained for 0.7 and 1 mm A3 ceramics (61.74±0.9 and 62.0±1.9, respectively). Conclusions: No flowable resin composite group with interposing ceramics reached a DC similar to the control group.

Linear setting expansion of different gypsum products

Introduction:Stone casts are used in dentistry to allow the confection of indirect restorations. Thus, gypsum dimensional stability is fundamental in order to achieve a precise fit between dental structure and restorative material.Objective: The purpose of the present study was to evaluate the hygroscopic linear expansion of commercially available gypsum products. Material and methods: Fifteen dental stones were analyzed (4 type II, 5 type III, 4 type IV and 2 type V), with n = 5. One hundred grams of each gypsum product were mixed following the respective manufacturers' recommendations for powder/water ratio and poured into a V-shape mold, connected to an expansion-measuring device. The hygroscopic expansion was evaluated during 120 min and the collected data was converted into percentage and compared to initial dimensions of the specimen. Results: All type II and V dental stones showed expansion values compatible to the ADA and ISO recommendations. Considering type III stones, only Rutenium 3 was compatible with the recommendations. For type IV, only Durone IV showed expansion values higher than that recommended by ADA, but lower than that of ISO recommendations.Conclusion: The hygroscopic linear expansion of gypsum products should be periodically controlled in order to ensure their precision and reliability to dental practice.

Indications and restorative techniques for glass ionomer cement

Introduction:Due to its chemical, mechanical and biological properties, the glass ionomer cements (GIC) consist in one of the most versatile direct restorative materials, with many potential clinical indications, especially in the context of minimally invasive dentistry. Nevertheless, they have some limitations and require the knowledge of their characteristics and procedures of application in order to achieve their maximum potential.Objective: To demonstrate through literature review the main characteristics, indications, limitations and future perspectives for the use of GIC. Literature review: The database, such as Pubmed and Lilacs were used. Additionally, books were also evaluated and included. Conclusion: The GIC is in constant evolution and is one of the materials that are best suited in the context of preventive and conservative dentistry. It has satisfactory properties and versatility. On the other hand, presents inferior properties when compared to other direct restorative materials, requiring caution during its handling.

Abordagem multidisciplinar na restauração de um dente posterior extensamente destruído - relato de caso / Extensive posterior tooth restoration with a multidisciplinary approach - case report

Entre os tipos mais frequentes de restaurações dentárias, destacam-se as restaurações dos tipos compostas e/ou complexas em dentes posteriores, sendo comum a perda de uma ou mais cúspides, necessitando de uma abordagem multidisciplinar. No contexto atual da Odontologia minimamente invasiva, as resinas compostas têm destaque importante, pois possibilitam a substituição de restaurações insatisfatórias sem sacrificar excessivamente as estruturas dentárias sadias. Esta característica importante permite a realização de restaurações extensas em dentes desvitalizados. Este relato de caso clínico objetiva descrever uma técnica restauradora de um dente posterior envolvendo uma abordagem multidisciplinar (periodontia, endodontia e dentística restauradora), apresentando e discutindo a sequência dos procedimentos adotados. Neste caso clínico foi realizada uma cirurgia periodontal com intuito de possibilitar a posterior restauração direta em resina composta, associada a um retentor intrarradicular reforçado com fibra de vidro. Dessa forma, com a evolução das técnicas e materiais disponíveis para os clínicos gerais e especialistas, esta abordagem possibilita a devolução da estética e da função em um pequeno número de sessões clínicas, com custo reduzido quando comparado aos tratamentos restauradores indiretos.

Complex or composite posterior teeth restorations are among the most common types, and the loss of one or more cuspids is very frequent and often requires a multidisciplinary approach. Within the context of minimally invasive Dentistry, composite resins are widely used since they allow the replacement of unsatisfactory restorations, avoiding excessive wear of the healthy tooth structure. This enables extensive restorations in devitalized teeth. This report aims to describe a restoration technique applied on a posterior tooth through multidisciplinary approach (periodontics, endodontics and restorative dentistry), presenting and discussing the adopted procedures. In this clinical case, a periodontal surgery was performed in order to allow the subsequent direct composite resin restoration associated with an intra-radicular fiber post. Thus, with the evolution of techniques and materials available to the general practitioner and specialists, direct restorations allow aesthetical and functional restoration with a small number of clinical sessions with a lower cost when compared to indirect restorations.

Evaluation of dentinal permeability reduction provided by different desensitizing treatments

problem at dental offices and new approaches may be developed. Objectives: The authors studied different desensitizing treatments and their efficacy in reducing dentinal permeability and dentinal tubules opening. Material and methods: One hundred bovine incisors roots had their buccal surface flattened and treated by 3 applications of each desensitizing agent, following the respective groups (n = 10). After treated, 7 specimens of each group were prepared for a 0.5% basic fuchsin permeability test and the other 3 specimens were prepared to SEM qualitative analysis. The permeability test specimens were sectioned with a diamond saw in order to evaluate the stained and unstained areas. Kruskall Wallis statistical analysis was performed (p < 0.05). Results: Colgate Pró-Alívio paste and toothpaste, diode and Nd:YAG Lasers, GHF, Sensi Active, Oxagel and 2% Desensibilize promoted a significant permeability reduction when compared with the respective control groups (p < 0.05). Comparing the mean permeability differences between the different groups after the treatments, Oxagel and Nd:YAG were better than 0.2% Desensibilize group. Conclusion: None of the treatments may be considered 100% effective in treating dentinal hypersensitivity since a partial reduction of the permeability was observed.

Use of restorative materials for direct and indirect restorations in posterior teeth by Brazilian dentists

Introduction: Often, dentists perform procedures aiming at more esthetical than long-term clinical performance of restorations. Objective: To evaluate the prevalence of use of different direct and indirect restorative materials in posterior teeth. Material and methods: In 2004, a questionnaire was applied to 486 dentists living at five geographical regions of Brazil. The dentists answered a questionnaire containing four questions, in which they reported the most widely used restorative material for direct (amalgam, composite resin, and glass ionomer) and indirect restorations (gold, silver, and copper/aluminum alloys, indirect resin composites, and ceramics) and specified the reason for using the material type selected. Results: In 2004, amalgam was the direct restorative material most used by dentists at almost all regions, except from South region, where resin composite was the most used. Esthetics was the main reason stated for the use of resin composites. As for indirect restorations, metallic restorations were the most used in Northeast (77.8%). No differences were found regarding the material type use between metallic and aesthetic materials at North, Southeast and Center-West regions. At South region, esthetic restorations were the most used. Conclusion: Despite the limitations of this present study, direct and indirect metallic restorations were the most common materials in 2004.

Bauru School of Dentistry Tele-Health League: an educational strategy applied to research, teaching and extension among applications in tele-health

Tele-health is more than an innovative alternative; it is an excellent tool that enables access to health and education in health, making it possible to minimize distances, optimize time and reduce costs. Based on these advantages, some Brazilian Universities have used these actions in strategies of education, research and extension, aiming at the application of Tele-health in Brazil. In that way, the Bauru School of Dentistry - University of São Paulo (FOB-USP) has applied the use of information and communication technologies in health by means of a "Tele-Health League" (TL), in order to diagnose, prevent and treat diseases, in addition to educate the population and health services. Objective: The present study aims to introduce the characteristics of the Tele-Health League of FOB-USP, as well as the development of its projects. Material and Methods: The Tele-Health League consisted as a Diffusion Course approved by the Provost of Culture and Academic Extension of the University of São Paulo. It is composed as a large group enclosing professoriate coordinator, academician principal, contributing professors and league members, those, diversified between undergraduates students, graduated, health employees, technology and information areas. The participant members are evaluated by the presence frequency (minimum of 85 percent), and by the performance of tests and paperwork about the theoretical content provided. Results: In four years of activities, the TLFOB-USP obtained a high satisfaction index (90 percent), an increased number of vacancies due to the interest to become a member, more commitment of the professors of the University and the accomplishment of association with other Brazilian leagues. It is emphasized that the approval percentage of the course results in approval from approximately half of its members. Also, it is important to identify and repair the causes related to the quitting of some members. Conclusions: The results showed that the TLFOB-USP members, adjoining to the professor's participants, develop projects in Tele-helth, in Tele-aid and Tele-education areas, thus resulting in the involvement of the University and the community.