Radiopacity and physical properties evaluation of infiltrants with Barium and Ytterbium addition

Abstract Radiopaque properties in the infiltrant should be interesting for clinicians to feel more confident to indicate this treatment. Thus, the aim of this study was to evaluate the effect of the incorporation of barium and ytterbium particles on the physical properties of resin infiltrants. Groups were divided according to the addition of ytterbium oxide (Y) alone (30 or 40%) or Y with barium (YB) (15/15% or 20/20% respectively) in the Icon commercial infiltrant and in the experimental infiltrant base. Digital radiography (n=5), Microradiography (n=5), Microtomography (n=3), degree of conversion (n=5), water sorption (n=16), solubility (n=16), contact angle (n=16), flexural strength (n=16), elastic modulus (n=16) and Energy dispersive X-ray Spectroscopy (n=10) were performed. Analyses were performed using the R program, with a significance level of 5%, and microradiography and Microtomography analyses were evaluated qualitatively. In groups with 30 or 40% of ytterbium, radiopacity was higher or equal to enamel. Microradiography and Microtomography appear to have more radiopacity in groups with 40% (Y). Among the groups with no particle addition, those of the experimental infiltrant presented a higher degree of conversion than those of Icon®. In most groups, there was solubility below the ISO-recommended levels. The addition of particles resulted in higher viscosity. Groups with Icon had higher flexural strength and elastic modulus than groups with experimental infiltrant. The addition of 40% (Y) improved polymerization, had low solubility, and had greater radiopacity than enamel, however negatively affected the viscosity increasing then. Experimental groups with the base showed a higher water sorption than Icon groups.

Resumo O objetivo desse estudo foi avaliar o efeito da incorporação de partículas de Bário e Itérbio nas propriedades físicas de infiltrantes resinosos. Os grupos foram divididos de acordo com a adição de Itérbio puro (30 ou 40%) ou Itérbio com Bário (15/15% ou 20/20% respectivamente) no infiltrante comercial Icon e no Infiltrante experimental base. Foram realizados os testes de: radiografia digital (n=5), microradiografia Transversa (n=5), microtomografia (n=3), grau de conversão (n=5), sorção (n=16), solubilidade (n=16), ângulo de contato (n=16), resistência flexural (n=16), modulo de elasticidade (n=16) e Espectroscopia por energia dispersiva (n=10). As análises foram realizadas utilizando o programa R, com nível de significância de 5%, e os testes de microradiografia e microtomografia foram analisados qualitativamente. Nos grupos com 30 ou 40% de Itérbio, a radiopacidade foi maior ou igual ao esmalte dentário. Na microradiografia e microtomografia parece ter maior radiopacidade nos grupos com 40% de itérbio. Dentre os grupos sem adição de partículas, os do infiltrante experimental apresentaram maior grau de conversão do que os do Icon e o grupo controle experimental e com 40% de itérbio apresentaram os melhores resultados. Na maioria dos grupos, a solubilidade foi abaixo dos níveis recomendados pela ISO. A adição de particulas resultou em maior viscosidade. Os grupos com Icon apresentaram maior resistência flexural e modulo de elasticidade do que os grupos com infiltrante experimental e a quantidade de partícula aumentou a resistência e o módulo de elasticidade. A adição de 40% de itérbio melhorou a polimerização, apresentou baixa solubilidade e maior radiopacidade do que o esmalte, porém afetou negativamente a viscosidade, aumentando-a.

Conservative treatment of interproximal incipient caries lesions by resin infiltration

Minimally invasive dentistry is based on conservative techniques for the treatment of initial caries lesions, the so-called white spot lesions. One of the conservative maneuvers includes the use of enamel resin infiltrant: a low viscosity material that penetrates the enamel pores to stop lesion progression. Aim: Therefore, this case report aimed to describe the clinical case of a 28-year-old female patient under routine consultation, in which a radiographic examination showed the presence of two incipient caries lesions in the left upper premolars. Methods: The application of a resin infiltrating agent (Icon®, DMG ­ Hamburg, Germany) was chosen as treatment to stop caries lesions progression. Conclusion: The use of this conservative technique can be considered a promising approach for the prevention of dental tissue wear, and the resin infiltrant is considered an effective material

Is there correlation between polymerization shrinkage, gap formation, and void in bulk fill composites? A µCT study

Abstract: This in vitro study aimed to evaluate the volume of polymerization shrinkage (VS), gap (VG), and void (VV) using computerized microtomography (μCT) in bulk fill resin composites and conventional class I restorations, and to establish a correlation between these factors. Class I cavities (4 x 5 x 4 mm), C-factor = 4.2, were performed on caries-free human third molars and randomly divided into five groups (n = 6): FSI (Filtek Supreme XTE incremental insertion); FSS [(Filtek Supreme XTE single insertion(SI)]; TBF [(Tetric Bulk Fill: SI and manual filling (MF)]; SFM (Sonic Fill: SI/MF); and SFS (SonicFill: SI and sonic filling). The teeth were scanned and analyzed by μCT at T0, after filling the cavity with resin, and at T1, after polymerization for VG and VV, and for VS (T1-T0). There was statistically significant difference in VS in μCT for the FSI and FSS groups and between SFS and FSS as well as some difference in VV for FSI and bulk fill resin composites and no difference in VG between the conventional technique and bulk fill composites. Bulk fill resin composites presented similar VS and gap formation to those of incrementally inserted conventional resin composites. There is a moderate and weak positive correlation between polymerization shrinkage and gap formation and void, respectively. The final gap formation was more dependent on the initial gap than on polymerization shrinkage or void volume.