ABSTRACT
Objective Using infrared spectroscopy to analyze three kinds of lignum Chinese medicine to provide a theoretical basis for the establishment of medicinal overall quality evaluation system. Methods Functional groups identification, Fourier Transform-infrared spectroscopy(FT-IR) and the second derivative infrared spectroscopy (SD-IR) could be applicable to analyze and identify the overall chemical composition of three kinds of lignum Chinese medicine. Results The main chemical components of Aquilariae Lignum Resinatum (ALR), Dalbergiae Odoriferae Lignum (DOL) and Sappan Lignum (SL) were cellulose, lignin and aromatics. The main chemical compositions of Sappan Lignum (SL) were cellulose, lignin and aromatics. The differences in FT-IR and SD-IR of DOL and SL indicated that they had different aromatic compounds. Conclusion Infrared spectroscopy can be used as a simple and accurate quality control method of three kinds of lignum Chinese medicine.
ABSTRACT
Objective To provide effective reference for quality analysis of the chemical composition and extraction of astragalus separation process by comparing the extract of astragalus and it’s IR spectra. Methods The saponins and flavonoids in astragalus were firstly extracted by the method of circumfluence with ethanol as solvent and the residue of ethanol-extraction was then used to extract polysaccharides by distilled water. Fourier transform infrared spectroscopy (IR) combined with second derivative infrared spectroscopy was applied to quickly identify astragalus herbs powder, water extraction of astragalus, astragalus alcohol extraction and water extraction of the residue of ethanol-extraction. Results The powder and 70% ethanol extract, 80% ethanol extract were around at 1 735 cm-1 (carbonyl stretching vibration absorption peak) has a weak, broad absorption, while the absorption peak was less obvious in boiling water extraction. So the maln components of astragalus water extraction are polysaccharides and also contaln a small amount of water-insoluble flavonoids. Alcohol extraction malnly contalns saponins and flavonoids, and flavonoid extract volume increases with increasing alcohol concentration in a certaln range.Conclusion This method can be a quick and easy identification for astragalus and it’s extraction for its chemical composition class, and provide the basis for further research quality.
ABSTRACT
In this review, the authors summarized the new technologies and methods for identifying traditional Chinese medicinal materials, including molecular identification, chemical identification, morphological identification, microscopic identification and identification based on biological effects. The authors introduced the principle, characteristics, application and prospect on each new technology or method and compared their advantages and disadvantages. In general, new methods make the result more objective and accurate. DNA barcoding technique and spectroscopy identification have their owner obvious strongpoint in universality and digitalization. In the near future, the two techniques are promising to be the main trend for identifying traditional Chinese medicinal materials. The identification techniques based on microscopy, liquid chromatography, PCR, biological effects and DNA chip will be indispensable supplements. However, the bionic identification technology is just placed in the developing stage at present.
Subject(s)
DNA Barcoding, Taxonomic , Drugs, Chinese Herbal , Chemistry , Medicine, Chinese Traditional , Oligonucleotide Array Sequence Analysis , Polymerase Chain ReactionABSTRACT
Objective Infrared spectroscopy was used to study on both raw material and different degree water processing varieties extract of Radix Aconiti kusnezoffii,to observe the changes of main toxic components in processing,and thus to improve the quality of Radix Aconiti kusnezoffii processed products.Methods Fu Liye transform infrared spectroscopy was adopted to study the infrared spectrum characteristic of raw materials and different degree water processing varieties of.Radix Aconiti kusnezoffii.Results ①Aconitine and hypaconitine infrared spectrum showed that 1717 cm-1,1727 cm-1 and 1711 cm-1 is the C=O stretching vibration peak.It is a diester alkaloids characteristic peaks; ② although absorption peak of all vesicular samples had a certain change,it still existed diester alkaloids absorption peak,indicating the incomplete hydrolysis; ③ boiled aconite processing methods demonstrated diester alkaloids absorption peak shift in the water sample.Conclusion Diester alkaloids in Radix Aconiti kusnezoffii shows a positive relation with its time soaked in water.
ABSTRACT
Aconitum kusnezoffi leaves and their extracts were analyzed and evaluated by fourier transform infrared spectroscopy, second derivative spectra, and two dimensional correlation infrared spectroscopy in this research. There was characteristic IR absorption peaks of polyose (767 cm(-1)) in the Aconitum kusnezoffii leaves. The IR spectra of the aether extract were similar with the ethanol extract of Aconitum kusnezoffi leaves. The strong absorption peaks of carbonyl (1 715 cm(-1)) and saturated alkyl groups (2 921, 2 851 cm(-1)) could be detected. Some fatty acids were also detected in the water extract. Infrared spectroscopy, combined with two dimensional correlation infrared spectroscopy, can provide much structural information for herbs, which will benefit the quality control, components tracing and identification of extraction process of herbs roundly and qualitatively.
Subject(s)
Aconitum , Chemistry , Plant Extracts , Chemistry , Plant Leaves , Chemistry , Spectroscopy, Fourier Transform InfraredABSTRACT
<p><b>OBJECTIVE</b>To establish a rapid determination method of pinoresinol diglucoside in Eucommiae unloads by near-infrared reflectance spectroscopy (NIRS).</p><p><b>METHOD</b>Forty-one samples of E. unloads were collected from three different producing areas and their main component, namely pinoresinol diglucoside, was determined by HPLC. Corresponding data of samples were collected from 12 000 to 4 000 cm(-1) by near-infrared reflectance spectroscopy. The spectral pretreatment was optimized by OPUS software and the calibration equations between the content of pinoresinol diglucoside and spectrum data were constructed by partial least squares regression.</p><p><b>RESULT</b>Available information could be extracted from spectra in the range from 7 502 to 4 597.6 cm(-1) after corrected by applying second derivative transformation and subtract a linear correction. Cross validation was used to prevent over-fitting. Good correlation existed between pinoresinol diglucoside content and NIR spectra ( R2 = 0.926 4, SEC = 0.029 and SEP = 0.066 2).</p><p><b>CONCLUSION</b>NIRS calibration equations developed in this study could be applied to the rapid analysis of the pinoresinol diglucoside content.</p>
Subject(s)
Eucommiaceae , Chemistry , Lignans , Spectrophotometry, Infrared , Methods , Time FactorsABSTRACT
A method of using Fourer transform infrared spectroscopy (FTIR) to detect 36 Ganoderma lucidun products rapidly and undamaged is reported. As the result, each of the samples has its characteristic infrared spectrum. By the difference of the relative intensity of those absorption peaks, different kinds of Ganoderma lucidums products can be detected. It is very fast, simple, reliable and has no solution effects.
ABSTRACT
Objective To determine ecdysterone content in Radix Achyranthis Bidentalae by near-infrared diffuse reflectance spectroscopy (NIRDRS) combined with partial least squares (PLS). Methods NIRDRS and PLS. Results The correlation coefficient of the quantitative mathematics model between the prediction and the true values was 0.948 9. It is feasible to appling the above established method to determination of chemical constituents in Chinese materia medica. Conclusion Compared with other methods, the method is simple, rapid, high efficient, low expenditure, no pollution and with preparation undone and is suit for large quantity of unknown samples.
ABSTRACT
AIM: To study the process of Radix Rehmannia Preparata and find “the proper processing end point”, then standardize the slice. METHODS: Monolithic surveillance to the process and analyzing the change of the characteristic peaks between dried Radix Rehmannia and Radix Rehmannia Preparata by FT IR spectroscopy. RESULTS: We can know the dynamic change in Radix Rehmannia Preparata during the convenient processing course by the FT IR spectroscopy. CONCLUSION:FT IR is a powerful measure to standardize processing techniques, standardize the slice on the base of traditional processing experiences.