ABSTRACT
OBJECTIVE@#To manufacture a new type of transverse process retractor by using computer-aided design(CAD) combined with 3D printing technology and investigate its clinical application effect.@*METHODS@#A new type of transverse protrusion retractor was developed by CAD combined with 3D printing technology. From September 2018 to September 2019, the new transverse process retractor was applied in clinic. Sixty patients with lumbar single segment lesions who needed treatment by pedicle screw fixation, bone grafting and interbody fusion were divided into new transverse process retractor group and control group, with 30 cases in each group. There were 14 males and 16 females in new type transverse process retractor group, the age was (68.0±4.3) years old on average; lesion segment of 8 cases were L3,4, 9 cases were L4,5, 13 cases were L5S1;5 cases of lumbar disc herniation, 20 cases of lumbar spinal stenosis, 5 cases of degenerative lumbar spondylolisthesis;new transverse process retractor was used to pedicle screw placement. While there were 15 males and 15 females in control group, with an average age of (69.2±4.5) years old;lesion segment of 8 cases were L3,4, 10 cases were L4,5, 12 cases were L5S1;5 cases of lumbar disc herniation, 21 cases of lumbar spinal stenosis, 4 cases of degenerative lumbar spondylolisthesis;the traditional lamina retractor was used for soft tissue pulling and finished pedicle screw placement by freehand. The length of surgical incision, the time required for inserting a single screw, fluoroscopy times, the times of adjusting the positioning needle or screw in insertion process, and the visual analogue scale (VAS) of surgical incision 72 hours after operation were compared between two groups.@*RESULTS@#Using CAD and 3D printing technology, a new type of transverse protrusion retractor was developed quickly. The length of surgical incision, the time required for inserting a single screw, fluoroscopy time, and the times of adjusting the positioning needle or screw in insertion process in new transverse process retractor group were less than those in control group(P<0.05). There was no significant difference in VAS of lumbar incision pain at 72 hours after operation between two groups(P>0.05).@*CONCLUSION@#Using CAD combined with 3D printing technology to develop a new transverse protrusion retractor has the advantages of convenient design, short development cycle and low cost. It provides a new idea for the research and development of new medical devices. The new transverse process retractor has the advantages of easy operation, reliable fixation, less damage to paravertebral muscle, convenient pedicle screw placement, reducing fluoroscopy time and so on.
Subject(s)
Aged , Female , Humans , Male , Middle Aged , Intervertebral Disc Displacement/surgery , Low Back Pain , Lumbar Vertebrae/surgery , Pedicle Screws , Printing, Three-Dimensional , Spinal Fusion , Spinal Stenosis/surgery , Spondylolisthesis/surgery , Surgical Wound , Treatment OutcomeABSTRACT
OBJECTIVE@#To evaluate accuracy and safety of individualized 3D printing guided template for thoracolumbar pedicle screw placement in patients with ankylosing spondylitis.@*METHODS@#From January 2016 to September 2019, thoracolumbar spine three-dimensional CT data of 8 patients with ankylosing spondylitis were included, Mimics 17.0 and ideaMaker computer software were applied to design thoracolumbar pedicle screw guided template of patients with AS, physical model of all patients (T-L)were printed by 3D printer, 2 parts in each patient, and divided into guide-plate-assisted screw group (experimental group) and free-hand nail group (control group). Thoracolumbar pedicle screws of both groups were placed by the same spinal surgeon. The accuracy of pedicle screw placement between two groups were evaluated according to results of postoperative CT, the accuracy of the fixation of thoracolumbar pedicle screw was divided into 4 grades, grade 0 and 1 screws were acceptable nails, grade 2 and 3 screws were unacceptable nails. The diameter and length of pedicle screws, the distance between entry point and posterior median line designed by preoperative 3D printing were compared with actual use in operation.@*RESULTS@#Twenty three blocks of thoracolumbar 3D printing screw of ankylosing spondylitis guided templates were designed and printed in guide-plate-assisted screw group, 46 screws were inserted and 44 screws were accepted. The time of implanting a screw into thoracolumbar pedicle was (4.20±1.15) min, the frequency of X-ray was (5.00±1.25) times and the average adjustment times of screw and Kirschner needle during screw placement was (1.76±1.32) times. In the control group, 46 nails were placed by traditional surgical method and 30 screws were accepted. The time of implanting a screw into thoracolumbar pedicle was (14.67±2.23) min, the frequency of X-ray fluoroscopy was (14.46±2.21) times and the average times of Kirschner needle adjustment was (4.76±3.39) times. The success rates between experimental group and control group were 95.65%(44 / 46) and 56.22%(30 / 46) respectively, and had statistical difference (χ=13.538, 0.05). The operation time of inserting a single screw, the times of X-ray fluoroscopy, and the average times of adjustment screw and Kirschner needle in experimental group were significant less than those in control group(<0.01).@*CONCLUSION@#The personalized guide template assisted the thoracolumbar fixation designed by 3D printing could significantly improve safety, accuracy and efficiency of surgery, especially suitable for thoracolumbar vertebral bodies requiring posterior pedicle screw fixation for fracture or dislocation with AS.
Subject(s)
Humans , Fluoroscopy , Pedicle Screws , Printing, Three-Dimensional , Spinal Fusion , Spondylitis, Ankylosing , Surgery, Computer-AssistedABSTRACT
Objective::Dalbergiae Odoriferae Lignum is a rare traditional Chinese medicine material in China. However, there are many varieties of various sources and different qualities in the market at present. In order to further define the pharmacodynamic substance basis, electrospray time-of-flight tandem mass spectrometry (UPLC-Q-TOF-MS/MS) was used to rapidly analyze chemical constituents of methanol extract of Dalbergiae Odoriferae Lignum. Method::Chromatographic separation was performed on an UPLC RRHD SB-C18(3.0 mm×100 mm, 1.8 μm)for gradient elution, with mixtures of acetonitrile and 0.1%formic acid-water as mobile phases at a flow rate of 0.3 mL·min-1. The column temperature was maintained at 40 ℃. The data was collected in a negative ion mode with electro-spray ionization source(ESI). Result::According to molecular ion peaks and MS2 mass spectrometry characteristic fragment ions, Mass Bank databases, as well as the mass spectrometry information of reference substances and relevant literatures, a total of 83 constituents were identified, including 18 flavones, 31 isoflavones, 10 neoflavonoids, 9 isoflavanones, 7 other flavonoids and 8 other components. Conclusion::UPLC-Q-TOF-MS/MS can quickly, accurately and comprehensively identify chemical constituents in methanol extract of Dalbergiae Odoriferae Lignum, and isoflavones, flavones, neoflavonoids and isoflavanones are the main chemical constituents, which laid a foundation for the basic research of medicinal substances of Dalbergiae Odoriferae Lignum, and provided theoretical basis and technical support for the improvement of quality standards of Dalbergiae Odoriferae Lignum.
ABSTRACT
OBJECTIVE@#To explore the application value of 3D printing technology in preoperative surgery plan and intraoperative auxiliary operation for adult kyphoscoliosis deformity.@*METHODS@#The clinical data of 12 adult patients with kyphoscoliosis deformity treated from September 2017 to January 2019 were retrospectively analyzed. There were 3 males and 9 females, aged from 21 to 63 years old with an average of (47.67±13.32) years old. Among them, 4 cases were congenital kyphoscoliosis, 2 cases were old tuberculosis thoracolumbar kyphosis ; 2 cases were idiopathic kyphoscoliosis, 4 cases were degenerative kyphoscoliosis. The CT scan data of the patient's spine was imported into Mimics17.0 software to establish the three dimensional model of the spine, and the spine model was produced by 3D printer. Using the spine model simulated operation, preoperative surgery program planning and formulated a precise surgery, and further analysed postoperative imaging parameters improvement. All the patients were followed up for more than 1 year. Before and after operation and at the last follow-up, the scoliosis Cobb angle, maximum kyphosis Cobb angle, and coronal plane balance (distance between C 7 plumbline and center sacral vertical line, CPL-CSVL), sagittal plane balance (sagittal vertical axis, SVA), pelvic parameters and other related imaging parameters were measured to further evaluate its orthopedic effect.@*RESULTS@#Twelve patients with spine deformity were treated with different osteotomy and internal fixation fusion methods under the guidance of a 1∶1 spine model (pedicle screw placement of 4 patients with severe deformity were assisted by pedicle screw guide plates), nail placement and osteotomy have good effects, no major tissue damage such as blood vessels, nerves and spinal cord during and after surgery, no complications such as cerebrospinal fluid leakage and infection. Preoperative Cobb angle of scoliosis was (56.5±22.5) °, Cobb angle of kyphosis was (65.2±19.5) °, C PL-CSVL was (45.8±16.9) mm, SVA was (48.7±25.4) mm. Postoperative at 4 weeks, Cobb angle of scoliosis was (20.8±11.5) °, and Cobb angle of kyphosis was (22.0±6.6) °, with correction rates of (65.1±9.7)% and (64.6± 10.6)%, respectively ; C PL-CSVL was (22.3±8.9) mm, and SVA was (23.3±13.1) mm, all of which were significantly improved compared with preoperative results. The mean follow-up time was (18.5±7.9) months in 12 patients. At the last follow-up, the Cobb angles of scoliosis and kyphosis were (22.2±10.8) ° and (23.6±7.7) °, respectively, C PL-CSVL was (23.5±10.8) mm, and SVA was (24.7±12.5) mm. The results were statistically significant compared preoperative (0.05).@*CONCLUSION@#The 3D print model can visually and clearly show the vertebral morphology and structure of adult kyphoscolisis and its spatial relationship with the adjacent vertebrae, blood vessels, and nerves, which provides a good and intuitive stereoscopic anatomical structure observation for the individualization of the surgical plan. Pre-simulation of operations to determine the internal fixation, fusion segment and osteotomy orthopedic way, may to provide a reference for actual clinical surgery, and can improve the accuracy and safety of surgery.
ABSTRACT
Objective To explore the value of serum circulating immune complex C 1q(CIC-C1q),comple-ment C3and C4in the diagnosis and treatment of patients with rheumatoid arthritis(RA).Methods From June 2014 to June 2016,60 cases of rheumatoid arthritis treated in Luoyang Central Hospital Affiliated to Zhengzhou University were selected as the observation group.Meanwhile,60 cases who under went healthy physical examination were chosen as control group.The levels of CIC-C1q,C3and C4in serum of two groups were detected by C1q solid-phase ELISA and immunoturbidimetry respectively,and the differences were com-pared.Results The level of CIC-C1q in the observation group was significantly higher than that in the control group,the level of C4was lower than control group,and there was statistical significance in the differences (P<0.05).But there was no statistical difference between the two groups of the C3level(P>0.05).The level of CIC-C1q was ascending in control group,quiescent phase RA group and active phase RA group,the statisti-cal significance was existed(P<0.05).The level of C4was successively decrease in the three groups,and there was a statistically significant difference(P<0.05).There was no significant difference in the level of C3the three groups(P> 0.05).Conclusion The detection of CIC-C1q and C4has a good application value in the treatment evaluation for patients with RA.
ABSTRACT
Gut microbiota provide enzymes and additional biochemical metabolic pathways for the host, which together with the host genome and the external environment, influence the body function. The composition of gut microbiota in infant is closely related to health in later life. However, it is influenced by many factors, including delivery mode, feeding pattern, prenatal diet, pregnancy psychology and antepartum antibiotic treatment. Vaginal delivery and breastfeeding is beneficial for shaping gut microbiota, while cesarean section and formula feeding would reduce the amount of gut dominant bacteria. In addition, inappropriate diet during pregnancy, prenatal stress and antepartum antibiotic treatment alters bacterial colonization of the gut in infant.
ABSTRACT
Objective: To explore the antagonistic effect of quercetin on fine particulate matter (PM2.5)-induced embryonic developmental toxicity in vitro.Methods: PM2.5 was collected on glass fiber filters by PM2.5 samplers during the heating period of Dec.2015 to Mar.2016 in an area of Haidian District, Beijing City.The sampled filters were cut into 1 cm×3 cm pieces followed by sonication.The PM2.5 suspension was filtered into a 10 cm glass dish through 8 layers of sterile carbasus and stored at-80 ℃ until freeze drying.Frozen PM2.5 suspension was dried by vacuum freeze-drying.In vitro post-implantation whole embryo culture was used in this study.Pregnant rats with 9.5 gestation days (GD) were killed by cervical dislocation and the uteri were removed into sterile Hank's solution.The embryos with intact yolk sacs and ecto placental cones were induced by PM2.5, and then subjected to intervention of quercetin at the doses of 0.1 μmol/L, 0.5 μmol/L, 1.0 μmol/L and 5.0 μmol/L, respectively.At the end of the 48 h culture period, the cultures were terminated, and all embryos were removed from the culture bottles and placed in prewarmed Hank's solution for evaluation.Morphological evaluation of the embryos was conducted under a stereomicroscope using the morphologic scoring system by Brown and Fabro.The mitochondrial reactive oxygen species (ROS) level was detected by FACSCalibur flow cyto-metry using MitoSOXTM Red staining.Results: An obvious antagonistic effect was achieved through querce-tin at the dose of 1.0 μmol/L, which could result in an increase of visceral yolk sac (VYS) diameter, crown-rump length and head length, somite number, and the differentiation of visceral yolk sac vascular vessels.The scores of allantois, flexion, heart, hind brain, midbrain, forebrain, auditory system, visual system, olfactory system, branchialarch, maxillary process, forelimb bud and hindlimb bud also revealed a significant increase and the relative mitochondrial ROS level of embryonic cells was significantly decreased when compared with PM2.5 group.Although quercetin at the doses of 0.1 μmol/L, 0.5 μmol/L, 5.0 μmol/L also exhibited protective effects against PM2.5-induced embryonic developmental toxicity, the protective effect was weaker when compared with the dose of 1.0 μmol/L.Conclusion: Quercetin at proper dose may be of great benefit for the development of embryos exposed to PM2.5 in the uterus of the rats.Quercetin provides an effective strategy for the prevention of PM2.5-induced embryonic developmental toxicity.Clearance of mitochondrial ROS may be one of its mechanisms.
ABSTRACT
The accumulation of rosmarinic acid, acetylshikonin, deoxyshikonin, β, β'-dimethylacrylshikonin and isovalerylshikonin was investigated in cell suspension cultures of Arnebia euchroma (Royle) Johnst under the influence of 2-aminoindan-2-phosphonic acid (AIP), an inhibitor of phenylalanine ammonia lyase (PAL), and of the effector methyl jasmonate (MeJA). The results showed that methyl jasmonate promoted the accumulation of rosmarinic acid and shikonin derivatives. Conversely, 2-aminoindan-2-phosphonic acid suppressed the formation of rosmarinic acid, which indicated that AIP, indeed, was able to inhibit the phenylpropanoid pathway in A. euchroma. Meanwhile, the content of total shinkonins and other four kinds of shikonin derivatives, though varied in degrees, was also inhibited. And the inhibition was dose-dependent and time-dependent. Acetylshikonin responsed most rapidly to the treatment of AIP, the content reduced after 24 h of treatment and decreased to only half of those untreated control 48 h after teratment. β, β'-Dimethylacrylshikonin, difffer from acetylshikonin, responded much slowly to the treatment, inhibition could only be observed 96 h later. These suggest that phenylpropanoid pathway plays an important role in the shikoninsbiosynthesis, and this study provides a reference for the further research in metabolic regulation of producing shikonins by cell culture technology and biosynthesis pathways of shikonin derivatives. Still, shikonins biosynthesis pathways is complicated, the exact dose- and time-effect relationship of AIP and interaction between AIP and other effectors like MeJA need further research.
ABSTRACT
@#Objectives. Polymorphisms in metabolic genes which alter rates of bioactivation and detoxification have been shown to modulate susceptibility to colorectal cancer. This study sought to evaluate the colorectal cancer risk from environmental factors and to do polymorphism studies on genes that code for Phase I and II xenobiotic metabolic enzymes among Filipino colorectal cancer patients and matched controls. Methods. A total of 224 colorectal cancer cases and 276 controls from the Filipino population were genotyped for selected polymorphisms in GSTM1, GSTP1, GSTT1, NAT1 and NAT2. Medical and diet histories, occupational exposure and demographic data were also collected for all subject participants.Results. Univariate logistic regression of non-genetic factors identified exposure to UV (sunlight) (OR 1.99, 95% CI: 1.16-3.39) and wood dust (OR 2.66, 95% CI: 1.21-5.83) and moldy food exposure (OR 1.61, 95% CI:1.11-2.35) as risk factors; while the NAT2*6B allele (recessive model OR 1.51, 95% CI :1.06-2.16; dominant model OR 1.87, 95% CI: 1.05-3.33) and homozygous genotype (OR 2.19, 95% CI: 1.19-4.03) were found to be significant among the genetic factors. After multivariate logistic regression of both environmental and genetic factors, only UV radiation exposure (OR 2.08, 95% CI: 1.21-3.58) and wood dust exposure (OR 2.08, 95% CI: 0.95-5.30) remained to be significantly associated with increasing colorectal cancer risk in the study population.Conclusion. This study demonstrated that UV sunlight and wood dust exposure play a greater role in influencing colorectal cancer susceptibility than genotype status from genetic polymorphisms of the GST and the NAT` genes.
Subject(s)
Colorectal Neoplasms , Polymorphism, GeneticABSTRACT
Objectives@#The highly polymorphic nature of the CYP2D6 gene and its central role in the metabolism of commonly used drugs make it an ideal candidate for pharmacogenetic screening. This study aims to determine the prevalence of CYP2D6 polymorphisms among Filipinos and their association to lung cancer. @*Method@#Forty seven single nucleotide polymorphisms (SNPs) of the CYP2D6 gene were genotyped from DNA samples of 115 cases with lung cancer and age- and sex-matched 115 controls. @*Results@#Results show that 18 out of 47 polymorphisms have significant genotypic variability (>1% for at least 2 genotypes). No variant is associated with lung cancer. However, rs1135840, rs16947 and rs28360521, were found to be highly variable among Filipinos. @*Conclusion@#This study demonstrated that CYP2D6 polymorphisms are present among Filipinos, which, although not found to be associated with lung cancer, can be useful biomarkers for future pharmacogenetic studies. The SNP rs16947 is found to be associated with cancer and timolol-induced bradycardia; the SNP rs1135840, on the other hand, is only shown to be linked with cancer. The genetic variant rs28360521 is known to be associated with low-dose aspirin-induced lower gastrointestinal bleeding.
Subject(s)
Pharmacogenetics , Cytochrome P-450 CYP2D6 , Lung Neoplasms , BiomarkersABSTRACT
This article mainly summarises the results of the chemical compositions and its pharmacological activities of Atractylodes Radix. The chemistry components isolated from Atractylodes Radix are mainly sesquiterpenoids, enediynes, triterpenoids, aromatic glycosides, and etc. Pharmacological results showed that Atractylodes Radix has inhibition of gastric acid secretion, promoting gastrointestinal movement and gastric emptying, hpyerglycemic, antibacterial, anti-inflammatory, cardiovascular protection and nervous system activity, etc. This article hopefully to provide a reference for further research, development and utilization of Atractylodes Radix.
ABSTRACT
The p-hydroxybenzoate geranyltransferases(PGT) play an important role in the biosynthesis pathways of shikonin derivatives. Six PGTs were obtained from transcriptome datebase of Arnebia euchroma by using bioinformatics methods and the proteins＇physiochemical properties they encoded were predicted. The result of protein domain prediction showed all of the six protein sequences contained the conserved domain of Ubia prenyltransferase family and possessed the motif NDxxDxxxD for prenyldiphosphate binding and a GX(K/Y)STAL sequence for putative aromatic ring binding. The phylogenetic tree showed that PGT and p-hydroxybenzoate polyprenyltransferase(PPT) belonged to two different clades. The results of gene expression analyses showed that the expression levels in the red shikonin-proficient line and the overground part of A. euchroma that could produce shikonin derivatives was much higher than the white shikonin-deficient line and the underground part, which suggested a positive correlation between the expression levels of PGT genes and shikonin production. This study aims to lay a foudation for further understanding of the function and enzymatic properties of PGT and provide a basis for the biosynthesis pathways and metabolic regulation of shikonin derivatives.
ABSTRACT
This article mainly summarise the results of the chemical compositions and their pharmacological activities of Arnebiae Radix since 1966. The chemistry components isolated from Arnebiae Radix are mainly naphthoquinone, monoterpene phenol and quinone, phenolic acids and their salts, alkaloids, aliphatic and esters. Pharmacological results showed that the chemical compositions and the extracts of Arnebiae Radix have antibacterial, anti-inflammatory, anti-viral, hepatoprotection, antioxidant, anti-tumor and immune function and other activities. This article hopefully to provide a reference for further research, development and utilization of Arnebiae Radix.
Subject(s)
Animals , Humans , Boraginaceae , Chemistry , Drugs, Chinese Herbal , Chemistry , Pharmacology , Molecular Structure , Plant Roots , ChemistryABSTRACT
Arnebia euchroma is the main source for medicinal herb Zicao. and its most important component shikonin compounds have high medicinal and industrial value. This research is aimed to build overexpression vectors and RNAi vectors for key secondary metabolism genes of A. euchroma, and bulid platform for constructions of related transgenic lines using GATEWAY technology. To build genetic material based genetic research platform is to provide a great convenience for digging and functional verification of the genes on secondary metabolic pathway, and also to fill the gaps in transgenic research of A. euchroma. This study is also important for the cultivation of shikonin high-yielding strains of A. euchroma.
Subject(s)
Boraginaceae , Genetics , Metabolism , Genetic Vectors , Genetics , Metabolism , Plant Proteins , Genetics , Metabolism , RNA Interference , Secondary MetabolismABSTRACT
We embarked on autologous dendric cells (DC) transplantation as an adjuvant therapy with chemotherapy in a pleomorphic lung carcinoma patient. DC were isolated from PBMC and primed with the autologous tumor lysate. No adverse event was noted in DC transplantation. DC administration also correlated with immunomodulation, as evidenced by an approximately 5-fold increase in serum interferon gamma after 2 months. The utility of autologous DC transplantation may offer a clinical benefit with virtually no adverse event.
Subject(s)
Humans , Male , Adult , Interferon-gamma , Leukocytes, Mononuclear , Immunomodulation , Neoplasms , Transplantation, Autologous , Combined Modality TherapyABSTRACT
<p><b>OBJECTIVE</b>To investigate the effects of hypertonic sodium chloride hydroxyethyl starch 40 (HSH) on brain edema and morphological changes during whole body hyperthermia (WBH) in rats.</p><p><b>METHODS</b>Sixty adult male SD rats were randomized into control group, WBH group without fluid infusion (group HT), WBH group with Ringer's infusion (group RL), WBH group with HAES + Ringer's infusion (group HRL) and WBH group with HSH infusion (group HSH). WBH was induced by exposure to 36 degrees celsius; for 3 h to achieve a rectal temperature of 41-42 degrees celsius;, and the corresponding fluids were administered intravenously within 30 min at the beginning of WBH. The control rats were housed at a controlled room temperature (22∓1) degrees celsius; for 4 h. After cooling at room temperature for 1 h, the rats were sacrificed and brain water content and morphological changes were evaluated.</p><p><b>RESULTS</b>Compared with the control group, all the WBH groups had significantly increased brain water content (P<0.05 or 0.01), but group HSH showed a significantly lower brain water content than group HT (P<0.05). The rats in groups HT, RL and HRL showed serious to moderate structural changes of the brain tissue and nerve cells, but HSH group had only mild pathologies.</p><p><b>CONCLUSION</b>HSH can reduce brain edema and ameliorate the damages to brain cells in rats exposed to WBH.</p>
Subject(s)
Animals , Male , Rats , Brain , Pathology , Brain Edema , Pathology , Hydroxyethyl Starch Derivatives , Therapeutic Uses , Hyperthermia, Induced , Rats, Sprague-Dawley , Saline Solution, Hypertonic , Therapeutic UsesABSTRACT
In order to explore the method to prepare hypoxia UW solution and the stability and preservation of hypoxia UW solution, UW solution was purged by argon or air for 15 min or 60 at a flow rate of 0.8 or 2 L/min, and the oxygen partial pressure of UW solution was detected. The hy-poxia UW solution was exposed to the air or sealed up to preserve by using different methods, and the changes of oxygen partial pressure was tested. The results showed that oxygen partial pressure of 50 mL UW solution, purged by argon for 15 min at a flow rate of 2 L/min, was declined from 242±6 mmHg to 83±10 mmHg. After exposure to the air, oxygen partial pressure of hypoxia UW solution was gradually increased to 160±7 mmHg at 48 h. After sealed up by the centrifuge tube and plastic bad filled with argon, oxygen partial pressure of hypoxia UW solution was stable, about 88±13 mmHg at 72 h. It was concluded that oxygen of UW solution could be purged by argon efficiently. Sealed up by the centrifuge tube and plastic bag filled with argon, oxygen partial pressure of UW so- lution could be stabilized.
ABSTRACT
Cinco coelhos infectados experimentalmente pelo Schistosoma mansoni exibiram acentuada resistencia, a qual esteve refletida na baixa recuperacao dos vermes e na escassa producao de ovos. As lesoes histopatologicas se limitaram a focos esparsos de infiltracao eosinofila em torno de ovos imaturos e alguns raros granulomas periovulares. No soro dos coelhos normais (pre-infeccao) foi detectada por imunofluorescencia indireta a presenca de anticorpos contra as estruturas ovulares e dos vermes adultos. Estes anticorpos se tornaram mais evidentes apos a infeccao pelo S. mansoni. Os achados deste estudo preliminar acentuam as peculiaridades da imunopatologia da esquistossomose no coelho