O-arm navigation versus C-arm navigation for guiding percutaneous long sacroiliac screws placement in treatment of Denis type Ⅱ sacral fractures / 中国修复重建外科杂志

OBJECTIVE@#To compare the effectiveness of O-arm navigation and C-arm navigation for guiding percutaneous long sacroiliac screws in treatment of Denis type Ⅱ sacral fractures.@*METHODS@#A retrospective study was conducted on clinical data of the 46 patients with Denis type Ⅱ sacral fractures between April 2021 and October 2022. Among them, 19 patients underwent O-arm navigation assisted percutaneous long sacroiliac screw fixation (O-arm navigation group), and 27 patients underwent C-arm navigation assisted percutaneous long sacroiliac screw fixation (C-arm navigation group). There was no significant difference in gender, age, causes of injuries, Tile classification of pelvic fractures, combined injury, the interval from injury to operation between the two groups ( P>0.05). The intraoperative preparation time, the placement time of each screw, the fluoroscopy time of each screw during placement, screw position accuracy, the quality of fracture reduction, and fracture healing time were recorded and compared, postoperative complications were observed. Pelvic function was evaluated by Majeed score at last follow-up.@*RESULTS@#All operations were completed successfully, and all incisions healed by first intention. Compared to the C-arm navigation group, the O-arm navigation group had shorter intraoperative preparation time, placement time of each screw, and fluoroscopy time, with significant differences ( P<0.05). There was no significant difference in screw position accuracy and the quality of fracture reduction ( P>0.05). There was no nerve or vascular injury during screw placed in the two groups. All patients in both groups were followed up, with the follow-up time of 6-21 months (mean, 12.0 months). Imaging re-examination showed that both groups achieved bony healing, and there was no significant difference in fracture healing time between the two groups ( P>0.05). During follow-up, there was no postoperative complications, such as screw loosening and breaking or loss of fracture reduction. At last follow-up, there was no significant difference in pelvic function between the two groups ( P>0.05).@*CONCLUSION@#Compared with the C-arm navigation, the O-arm navigation assisted percutaneous long sacroiliac screws for the treatment of Denis typeⅡsacral fractures can significantly shorten the intraoperative preparation time, screw placement time, and fluoroscopy time, improve the accuracy of screw placement, and obtain clearer navigation images.

Osteotomy of non-core weight-bearing area of the lateral tibial plateau, reduction, and internal fixation in treatment of tibial plateau fractures involving posterolateral column collapse / 中国修复重建外科杂志

OBJECTIVE@#To investigate the effectiveness of osteotomy of non-core weight-bearing area of the lateral tibial plateau, reduction, and internal fixation in the treatment of tibial plateau fractures involving posterolateral column collapse.@*METHODS@#A clinical data of 23 patients with tibial plateau fractures involving posterolateral column collapse, who had undergone osteotomy of non-core weight-bearing area of the lateral tibial plateau, reduction, and internal fixation between January 2015 and June 2021, was retrospectively analyzed. There were 14 males and 9 females with an average age of 42.6 years ranging from 26 to 62 years. The causes of injury included traffic accident in 16 cases, falling from height in 5 cases, and other injuries in 2 cases. According to Schatzker classification, there were 15 cases of type Ⅴ and 8 cases of type Ⅵ. The time from injury to operation was 4-8 days with an average of 5.9 days. The operation time, intraoperative blood loss, fracture healing time, and complications were recorded. The depth of articular surface collapse of posterolateral column and posterior inclination angle (PSA) of the tibial plateau were compared before operation and at 2 days and 6 months after operation; fracture reduction of tibial plateau fracture was evaluated by Rasmussen anatomic score. The recovery of knee function was evaluated by Hospital for Special Surgery (HSS) score at 2 days and 6 months after operation.@*RESULTS@#All 23 patients were completed the operation successfully. The operation time was 120-195 minutes, with an average of 152.8 minutes; the intraoperative blood loss was 50-175 mL, with an average of 109.5 mL. All patients were followed up 12-24 months, with an average of 16.7 months. One patient had superficial wound infection after operation, and the incision healed after dressing change; primary healing of incision of other patients was obtained. The fracture healing time was 12-18 weeks, with an average of 13.7 weeks. No failure of internal fixation, varus and valgus deformity of the knee joint, and instability of the knee joint was found at last follow-up. One patient developed joint stiffness and the range of motion of the knee joint was 10°-100°; the range of motion of the knee joint of other patients was 0°-125°. At 2 days and 6 months after operation, the depth of articular surface collapse of posterolateral column, PSA, and Rasmussen anatomic scores significantly improved when compared with those before operation ( P<0.05). There was no significant difference between the two postoperative time points ( P>0.05). The HSS score at 6 months after operation was significantly higher than that at 2 days after operation ( P<0.05).@*CONCLUSION@#For tibial plateau fractures involving posterolateral column collapse, reduction and internal fixation through osteotomy of non-core weight-bearing area of the lateral tibial plateau has the advantages of fully expose the posterolateral column fragment, good articular surface reduction, sufficient bone grafting, and fewer postoperative complications. It is beneficial to restore knee joint function and can be widely used in clinic.

Finite element analysis of five internal fixation modes in treatment of Day type Ⅱcrescent fracture dislocation of pelvis / 中国修复重建外科杂志

OBJECTIVE@#To compare the biomechanical differences among the five internal fixation modes in treatment of Day type Ⅱ crescent fracture dislocation of pelvis (CFDP), and find an internal fixation mode which was the most consistent with mechanical principles.@*METHODS@#Based on the pelvic CT data of a healthy adult male volunteer, a Day type Ⅱ CFDP finite element model was established by using Mimics 17.0, ANSYS 12.0-ICEM, Abaqus 2020, and SolidWorks 2012 softwares. After verifying the validity of the finite element model by comparing the anatomical parameters with the three-dimensional reconstruction model and the mechanical validity verification, the fracture and dislocated joint of models were fixed with S 1 sacroiliac screw combined with 1 LC-Ⅱ screw (S 1+LC-Ⅱ group), S 1 sacroiliac screw combined with 2 LC-Ⅱ screws (S 1+2LC-Ⅱ group), S 1 sacroiliac screw combined with 2 posterior iliac screws (S 1+2PIS group), S 1 and S 2 sacroiliac screws combined with 1 LC-Ⅱ screw (S 1+S 2+LC-Ⅱ group), S 2-alar-iliac (S 2AI) screw combined with 1 LC-Ⅱ screw (S 2AI+LC-Ⅱ group), respectively. After each internal fixation model was loaded with a force of 600 N in the standing position, the maximum displacement of the crescent fracture fragments, the maximum stress of the internal fixation (the maximum stress of the screw at the ilium fracture and the maximum stress of the screw at the sacroiliac joint), sacroiliac joint displacement, and bone stress distribution around internal fixation were observed in 5 groups.@*RESULTS@#The finite element model in this study has been verified to be effective. After loading 600 N stress, there was a certain displacement of the crescent fracture of pelvis in each internal fixation model, among which the S 1+LC-Ⅱ group was the largest, the S 1+2LC-Ⅱ group and the S 1+2PIS group were the smallest. The maximum stress of the internal fixation mainly concentrated at the sacroiliac joint and the fracture line of crescent fracture. The maximum stress of the screw at the sacroiliac joint was the largest in the S 1+LC-Ⅱ group and the smallest in the S 2AI+LC-Ⅱ group. The maximum stress of the screw at the ilium fracture was the largest in the S 1+2PIS group and the smallest in the S 1+2LC-Ⅱ group. The displacement of the sacroiliac joint was the largest in the S 1+LC-Ⅱ group and the smallest in the S 1+S 2+LC-Ⅱ group. In each internal fixation model, the maximum stress around the sacroiliac screws concentrated on the contact surface between the screw and the cortical bone, the maximum stress around the screws at the iliac bone concentrated on the cancellous bone of the fracture line, and the maximum stress around the S 2AI screw concentrated on the cancellous bone on the iliac side. The maximum bone stress around the screws at the sacroiliac joint was the largest in the S 1+LC-Ⅱ group and the smallest in the S 2AI+LC-Ⅱ group. The maximum bone stress around the screws at the ilium was the largest in the S 1+2PIS group and the smallest in the S 1+LC-Ⅱ group.@*CONCLUSION@#For the treatment of Day type Ⅱ CFDP, it is recommended to choose S 1 sacroiliac screw combined with 1 LC-Ⅱ screw for internal fixation, which can achieve a firm fixation effect without increasing the number of screws.

Effect of hollow lag screw combined with calcaneal locking plate in the treatment of Letenneur type III Hoffa fracture / 中华创伤杂志

Objective:To compare the clinical effect of cannulated lag screw combined with calcaneal locking plate versus cannulated lag screw in the treatment of Letenneur type III Hoffa fracture.Methods:A retrospective cohort study was performed on clinical data of 41 patients with Letenneur type III Hoffa fracture admitted to General Hospital of Central Theater Command of PLA from January 2010 to June 2020. There were 22 males and 19 females, aged 28-78 years［(51.9±1.9)years］. A total of 18 patients were treated with cannulated lag screw combined with calcaneal locking plate (plate-screw group) and 23 patients were treated with cannulated lag screw (screw group). The bed rest time, hospital time and bone healing time were compared between the two groups. Range of motion (ROM) of the knee at 3 and 6 months postoperatively, knee society score (KSS) at 3 and 6 months postoperatively and incidence of long-term complications were compared between the two groups.Results:All patients were followed up for 10-24 months［(14.5±2.1)months］. The bed rest time was (37.6±2.4)days in plate-screw group, lower than (45.2±1.6)days in screw group ( P<0.05). The hospital time was (16.7±3.7)days in plate-screw group, and (15.8±3.7)days in screw group ( P>0.05). The bone healing time was (12.2±0.9)weeks in plate-screw group and (12.7±0.7) weeks in screw group ( P>0.05). ROM of the knee at 3 and 6 months after operation was (119.9±2.9)° and (125.4±4.5)° in plate-screw group, greater than (116.6±4.5)°and (122.1±3.9)° in screw group (both P<0.05). KSS at 3 and 6 months after operation was (83.4±3.1)points and (86.2±2.5)points in plate-screw group, greater than (79.5±2.1)points and (82.2±2.2)points in screw group (both P<0.05). ROM of the knee and KSS in two groups increased significantly over time (both P<0.01). The long-term complications in plate-screw group included delayed fracture healing in 1 patient, traumatic arthritis in 1 and stiff joint in 1, showing the complication rate of 17% (3/18). The long-terem complications in screw group included internal fixation failure in 1 patient, delayed fracture healing in 2, nonunion in 1, traumatic arthritis in 2 and stiff joint in 2, showing the complication rate of 35% (8/23). The two groups had no significant difference in the complication rate ( P>0.05) .Conclusion:For Letenneur type III Hoffa fracture, cannulated lag screw fixation combined with calcaneal locking plate is superior to seperate cannulated lag screw fixation in aspects of short bed-term bed rest, early functional exercise, improved ROM and good function recovery.

Efficacy comparison of navigation-assisted percutaneous cannulated screw fixation and posterior percutaneous plate fixation for the treatment of Day type II crescent fracture dislocation of pelvis / 中华创伤杂志

Objective:To compare the clinical outcome of navigation-assisted percutaneous cannulated screw fixation and posterior percutaneous plate fixation for Day type II crescent fracture dislocation of pelvis (CFDP).Methods:A retrospective cohort analysis was performed on clinical data of 40 patients with Day type II CFDP treated in General Hospital of Central Theater Command of PLA from January 2012 to June 2021. There were 23 males and 17 females, with age range of 42-73 years [(54.2±7.8)years]. A total of 19 patients were treated with navigation-assisted percutaneous cannulated screw fixation (navigation group) and 21 with posterior percutaneous plate fixation (plate group). The incision length, operation time, intraoperative blood loss and in-hospital time were compared between the two groups. The reduction quality was evaluated by Matta radiographic standard at day 2 after surgery. The functional recovery was assessed by Majeed functional score at 3 and 6 months after surgery. The postoperative complications were observed.Results:All patients were followed up for 10-24 months [(13.6±2.9)months]. The incision length, operation time, intraoperative blood loss and in-hospital time was (2.4±0.3)cm, (43.1±5.2)minutes, (48.4±18.4)ml and (14.4±1.9)days in navigation group, showing significant difference compared with plate group [(8.8±0.4)cm, (132.2±19.4)minutes, (302.9±57.5)ml, (18.9±3.7)days] (all P<0.01). According to Matta radiographic standard at day 2 after surgery, the excellent and good rate was 89% in navigation group (excellent in 13 patients, satisfactory in 4 and poor in 2) and 95% in plate group (excellent in 15 patients, satisfactory in 5 and poor in 1) ( P>0.05). According to Majeed criteria at 3 months after surgery, the excellent and good rate was 89% in navigation group (excellent in 12 patients, good in 5 and poor in 2) and 95% in plate group (excellent in 15 patients, good in 5 and poor in 1) ( P>0.05). According to Majeed criteria at 6 months after surgery, the excellent and good rate was 95% in navigation group (excellent in 14 patients, good in 4 and poor in 1) and 95% in plate group (excellent in 17 patients, good in 3 and poor in 1) ( P>0.05). There was no iatrogenic neurovascular injury. The incidence of complications was 11% (2/19) in navigation group, including one patients with sacroiliac screw loosening and one with posterior iliac screw penetrating the medial cortex of the bone, while that was 29% (6/21) in plate group, including two patients with skin tenderness, two with deep vein thrombosis in the lower extremity and two with incision infection ( P<0.05). Conclusions:For Day type II CFDP, both navigation-assisted percutaneous cannulated screw fixation and posterior percutaneous plate fixation can attain satisfactory efficacy, but the former has advantages of shorter operation time, less surgical trauma, less bleeding, shorter in-hospital time and lower incidence of complications.

Effect of irisin on hypoxic-ischemic brain damage in neonatal rats / 中国当代儿科杂志

OBJECTIVE@#To study the effect and mechanism of action of irisin on hypoxic-ischemic brain damage in neonatal rats.@*METHODS@#A total of 248 7-day-old Sprague-Dawley rats were randomly divided into a sham-operation group, a model group, and low- and high-dose irisin intervention groups (n=62 each). The rats in the model and irisin intervention groups were given hypoxic treatment after right common carotid artery ligation to establish a model of hypoxic-ischemic brain damage. Those in the sham-operation group were given the separation of the right common carotid artery without ligation or hypoxic treatment. The rats in the high- and low-dose irisin intervention groups were given intracerebroventricular injection of recombinant irisin polypeptide at a dose of 0.30 µg and 0.15 µg respectively. Those in the model and sham-operation groups were given the injection of an equal volume of PBS. The water maze test was used to compare neurological behaviors between groups. TTC staining, hematoxylin-eosin staining and TUNEL staining were used to observe histopathological changes of the brain. Western blot was used to measure the expression of the apoptosis-related molecules cleaved-caspase-3 (CC3), BCL-2 and BAX.@*RESULTS@#Compared with the sham-operation group, the model group had a significant increase in latency time and a significant reduction in the number of platform crossings (P<0.05). Compared with the model group, the high-dose irisin intervention group had a significant reduction in latency time and a significant increase in the number of platform crossings (P<0.05). Compared with the sham-operation group, the model group had massive infarction in the right hemisphere, with significant increases in karyopyknosis and karyorrhexis. Compared with the model group, the high-dose irisin intervention group had a smaller infarct area of the right hemisphere, with reductions in karyopyknosis and karyorrhexis. The model group had a significantly higher apoptosis rate of cells in the right cerebral cortex and the hippocampus than the sham-operation group. The high-dose irisin intervention group had a significantly lower apoptosis rate than the model group (P<0.05). At 24 and 48 hours after modeling, the sham-operation group had a significantly lower level of CC3 than the model group (P<0.05). Compared with the model group, the high-dose irisin intervention group had a significantly lower level of CC3 and a significantly higher BCL-2/BAX ratio (P<0.05). The low-dose irisin intervention group had similar laboratory markers and histopathological changes of the brain to the model group.@*CONCLUSIONS@#Irisin can alleviate hypoxic-ischemic brain damage in neonatal rats in a dose-dependent manner, possibly by reducing cell apoptosis in the cerebral cortex and the hippocampus.

Standardization of preparation of rice fried Codonopsis Radix based on correlation analysis of functional component and shape index / 中国中药杂志

The quality standard of Chinese herbal medicine is the key in quality control, and the establishment of rice processing technology standard of rice fried Codonopsis Radix has important significance for the overall quality control. In this study, the color brightness (L*), red-green chromaticity coordinate (a*), yellow-blue chromaticity coordinate (b*) and total color value（E*ab）were determined by colorimeter and used as the shape indexes. Ethanol extractives, polysaccharide, lobetyolin and 5-hydroxymethyl furfural contents were determined by using high performance liquid chromatography (HPLC) and ultraviolet (UV), and used as chemical indexes in the analysis by normalization distance method. The two index methods were adopted to optimize the processing technology of rice fried Codonopsis Radix by taking processing temperature, processing time, rice types and rice dosage as factors. The correlation analysis between the two index methods was carried out by SAS 9.40 and JMP 11 software. The results showed that all the four factors had significant differences, and the best processing technology was as follows: polished round-grained rice as raw material, processing temperature at 140 °C, processing time of 10min, and the ratio of Codonopsis pilosula and rice is 100:30. Chemical indexes showed significant positive correlations with shape indexes, providing basis for the quality evaluation of rice fried Codonopsis Radix in processing.

Standardization system of industry decoction pieces based on whole process quality control concept / 中国中药杂志

Traditional Chinese medicine (TCM) decoction pieces refer to prescription drugs that can be used in clinical or preparation production after processing medicinal herbs. TCM decoction pieces industries are inherited from the culture of TCM and are important because of their independent intellectual property rights. The Chinese Pharmacopoeia (Ch. P) 2010 edition stipulated that "All drugs taken are decoction pieces", which raised the drug status to statutory law for the first time and clearly specified that TCM decoction pieces should be applied to TCM prescription deployment and production of proprietary Chinese medicines. It also pointed out that "The specifications of the decoction pieces used in the preparation should comply with the requirements of the actual process of the corresponding formulation type". For a long time, both the processing methods and the specification grades of the clinically used pieces of Chinese medicine were based on the inheritance and supported by the classical theory and method system centered on TCM processing. However, the theoretical research and specification standards of the decoction pieces used in the production of proprietary Chinese medicines based on modern industry are scarce, and this has led to a series of problems related to the industry, making the processing of decoction pieces becoming a limiting factor in the promotion of the Chinese medicine industry. Aiming at the existing problems of the TCM decoction pieces industry, this article was guided by the standardization system of TCM based on the concept of whole-process quality control, combined with the reference to the Japanese Kampo medicine industry's feeding mode and the reflection on the combination of traditional Chinese medicine processing and modern industry, as well as the study of the core law of the whole-process of TCM production, etc. Industrial decoction pieces and the idea of building a standardized system of TCM industry decoction pieces based on the whole-process quality control were discussed in this paper, which can provide insights for exploring the effective fusion between TCM processing theory and classic heritage and modern manufacturing and can provide the basis for the establishment of a standardized system for industrial decoction pieces based on whole-process quality control of TCM. It can also offer reference for the development of the advantages of geo-authentic crude drug and the establishment of high spots of industry decoction pieces.

Discussion on research thinking of traditional Chinese medicine standardization system based on whole process quality control / 中国中药杂志

The concept of "Quality by design" indicates that good design for the whole life cycle of pharmaceutical production enables the drug to meet the expected quality requirements. Aiming at the existing problems of the traditional Chinese medicine (TCM) industry, the TCM standardization system was put forward in this paper from the national strategic level, under the guidance by the idea of quality control in international manufacturing industry and with considerations of TCM industry's own characteristics and development status. The connotation of this strategy was to establish five interrelated systems: multi-indicators system based on tri-indicators system, quality standard and specification system of TCM herbal materials and decoction pieces, quality traceability system, data monitoring system based on whole-process quality control, and whole-process quality management system of TCM, and achieve the whole process systematic and scientific study in TCM industry through "top-level design-implement in steps-system integration" workflow. This article analyzed the correlation between the quality standards of all links, established standard operating procedures of each link and whole process, and constructed a high standard overall quality management system for TCM industry chains, in order to provide a demonstration for the establishment of TCM whole-process quality control system and provide systematic reference and basis for standardization strategy in TCM industry.

Development of whole process quality control and management system of traditional Chinese medicine decoction pieces based on traditional Chinese medicine quality tree / 中国中药杂志

The whole process quality control and management of traditional Chinese medicine (TCM) decoction pieces is a system engineering, involving the base environment, seeds and seedlings, harvesting, processing and other multiple steps, so the accurate identification of factors in TCM production process that may induce the quality risk, as well as reasonable quality control measures are very important. At present, the concept of quality risk is mainly concentrated in the aspects of management and regulations, etc. There is no comprehensive analysis on possible risks in the quality control process of TCM decoction pieces, or analysis summary of effective quality control schemes. A whole process quality control and management system for TCM decoction pieces based on TCM quality tree was proposed in this study. This system effectively combined the process analysis method of TCM quality tree with the quality risk management, and can help managers to make real-time decisions while realizing the whole process quality control of TCM. By providing personalized web interface, this system can realize user-oriented information feedback, and was convenient for users to predict, evaluate and control the quality of TCM. In the application process, the whole process quality control and management system of the TCM decoction pieces can identify the related quality factors such as base environment, cultivation and pieces processing, extend and modify the existing scientific workflow according to their own production conditions, and provide different enterprises with their own quality systems, to achieve the personalized service. As a new quality management model, this paper can provide reference for improving the quality of Chinese medicine production and quality standardization.

Simultaneous content determination of 14 components in Rhei Radix et Rhizoma by high performance liquid chromatography method / 中国中药杂志

To establish an HPLC (high performance liquid chromatography) method for the simultaneous content determination of gallic acid, (+)-catechin, (－)-epicatechin-3-O-gallate, isolindleyin, 4-(4'-hydroxyphenyl)-2-butanone, emodin, chrysophanol, physcion, aloe-emodin, rhein, lindleyin, 4-(4'-hydroxyphenyl)-2-butanone-4'-O-β-D-(2″-O-galloyl-6″-O-cinnamoyl)-glucopyranoside, sennoside A and sennoside B in Rhei Radix et Rhizoma. The analysis was performed on Agilent Zorbax SB-C₁₈ (4.6 mm×150 mm, 5 μm) with 0.05% phosphoric acid solution (A) - acetonitrile (B) as mobile phase for gradient elution. The flow rate was 1 mL•min⁻¹, with column temperature of 40 ℃ and the wavelength was set at 268 nm. All calibration curves showed good linearity (r > 0.999 9) within the concentration range. Both the intra- and inter-day precision for 14 analytes was less than 3.1%, with the mean recovery at the range of 91.80%-104.1%. Meanwhile, quantitative determination was carried out for 10 qualified samples from Rheum palmatum and 10 qualified samples from R. tanguticum, respectively. It was found that the content of 4-(4'-hydroxyphenyl)-2-butanone and aloe-emodin were higher in the R. tanguticum and R. palmatum, respectively, and the content of all the compounds was different in each sample. The established HPLC method for simultaneous content determination of 14 compounds from Rhei Radix et Rhizoma could be used for quantitative assessment and quality control of Rhei Radix et Rhizoma.

Clinical observation of partial pancreatectomy as part of primary cytoreductive surgery in advanced epithelial ovarian cancer / 中华妇产科杂志

Objective The aim of this study is to evaluate the safety and efficacy of partial pancreatectomy as part of primary cytoreductive surgery in advanced epithelial ovarian cancer (EOC). Methods A total of 8 patients were recruited in this study who underwent partial pancreatectomy during the primary cytoreductive surgeries for advanced EOC in Fudan University Shanghai Cancer Center from April 2009 to July 2015. Their clinicopathological characteristics, diameter of metastatic tumors, the scope of cytoreductive surgeries, residual diseases after cytoreductive surgeries, postoperative complications and survival situation were retrospective analyzed. Results (1) Clinicopathological characteristics:the median age of these patients was 58 years old(range: 39-63 years old). The median value of preoperative serum CA125 was 1 688 kU/L(range: 119-5 000 kU/L). The median diameter of metastatic tumors involved in pancreatic body or tail was 4.5 cm (range:3-10 cm). All the tumors from the 8 patients were confirmed to be high-grade serous carcinoma. Four patients were staged as International Federation of Gynecology and Obstetrics (FIGO)Ⅳ, and the other 4 patients were staged as FIGOⅢc. (2) Tumor metastases and the scope of cytoreductive surgeries:all of these 8 patients had widely disseminated ovarian cancer, with involvement of upper abdominal, middle abdominal and pelvic cavity. Each patient underwent extensive intra-abdominal cytoreductive surgeries, including hysterectomy, bilateral salpingo-oophorectomy, omentectomy, pelvic periton-ectomy, splenectomy, partial pancreatectomy. Each patient had cytoreductive surgeries of 9.6 different sites on average. Of all 8 patients who underwent partial pancreatectomy, 7 patients had pancreatic tails removed;the other 1 patient had pancreatic body and tail removed. The median volume of blood loss during surgery was 1 350 ml(range:300-3 500 ml), blood transfusion was performed in 7 patients with the median volume of 1 150 ml (range: 500-1 800 ml). (3) Residual diseases after cytoreductive surgeries: optimal cytoreduction was achieved in all patients, with microscopic residual disease in 3 patients, residual tumors diameter < 0.5 cm in 3 patients, and residual tumors diameter between 0.5 and 1 cm in 2 patients. (4) Postoperative complications: 4 patients suffered from complications including pancreatic leakage (2/8), intraperitoneal hemorrhage (1/8) and pancreatic pseudocyst accompanied by infection (1/8). These complications were treated successfully by conservative managements. (5) Survival situation: during the median follow-up duration of 17 months (ranged from 2 to 46 months), 5 patients were still alive until the end of follow-up, including 4 cases under treatment and 1 case survived 29 months without relapse after treatment. Three patients were respectively died in 5, 20 and 46 months after surgery. Conclusion There is a higher risk of postoperative complications of pancreas resection as part of primary cytoreductive surgery in advanced epithelial ovarian cancer, but the resection of pancreatic metastases and part of the pancreas is feasible and necessary.

Analysis on second operation after laser in situ keratomileusis / 国际眼科杂志(Guoji Yanke Zazhi)

AlM:To observe clinical effects between the laser in situ keratomileusis ( LASlK ) surgery and the laser subepithelial keratomileusis ( LASEK ) surgery as the second operation after an unsuccessful LASlK surgery.METHODS:Forty-nine patients (98 eyes) with refractive regression after LASlK operation received the second surgery. All patients were divided into two groups:group A and B. Group A (48 eyes of 24 patients) received LASlK surgery and group B ( 50 eyes of 25 patients ) received LASEK surgery. lnspect the main parameters included visual acuity, refraction, corneal curvature, and the total value of high-aberration after 1wk, 1mo and 1a, t-test of groups was used as statistical analysis method.RESULTS: There was statistically significant (P0. 05). There developed one case of epithelium in growth after LASlK surgery, and one case of haze Ⅱ after LASEK surgery.CONCLUSlON: Both LASlK and LASEK surgery can obtain satisfactory therapeutic results after an unsuccessful LASlK surgery.