ABSTRACT
Objective:To investigate the clinical significance of a new classification system for atlas fractures based on pre- and post-treatment CT features, with a focus on diagnosis and treatment.Methods:A retrospective analysis was conducted on 75 cases of cervical vertebra fractures treated at the Sixth Hospital of Ningbo City between January 2015 and December 2020. The study included 44 males and 31 females, with an average age of 53.3±13.0 years (range: 27-81 years). The fractures were classified according to the Landells classification, resulting in 12 cases of type I, 13 cases of type II, 33 cases of type III, 9 cases that were difficult to classify due to fracture lines located at anatomical junctions, and 8 cases that could not be classified using the Landells classification due to diverse injury mechanisms. To establish a new preliminary classification for cervical vertebra fractures, the researchers considered whether the fracture line in the CT images involved the facet joint surface of the atlas, the impact on bilateral half-rings, and the displacement distance of the fracture ends. Five spinal surgeons were randomly selected to classify the CT images of the 75 patients using the new classification method. After one month, the imaging data of the 75 cases of cervical vertebra fractures were randomized and reclassified to assess the reliability and repeatability of the classification.Results:The new cervical vertebra fracture classification method comprised three types based on whether the fracture line involved the facet joint surface of the atlas: type A (no involvement of the facet joint surface of the atlas), type B (involvement of one side of the facet joint surface with intact contralateral half-ring), and type C (involvement of one side of the facet joint surface with fractured contralateral half-ring). Additionally, based on the maximum displacement distance between the fracture ends (>4 mm), six subtypes were identified: subtype 1 (≤4 mm displacement) and subtype 2 (>4 mm displacement). Consequently, the subtypes were classified as A1, A2, B1, B2, C1, and C2. According to the new classification method, the 75 patients included 17 cases of A1, 12 cases of A2, 7 cases of B1, 13 cases of B2, 12 cases of C1, and 14 cases of C2. The classification demonstrated excellent consistency, as assessed by the five doctors, with Kappa values of 0.85 and 0.91 for reliability and repeatability, respectively. At the final follow-up, all conservatively treated patients achieved bone healing, while four surgically treated patients experienced non-union of the fracture ends but exhibited good fusion between the atlas and axis. The remaining surgically treated patients achieved bony union without complications such as loosening or fracture of internal fixation.Conclusion:The new cervical vertebra fracture classification method, based on CT imaging features, comprehensively covers common clinical cases of cervical vertebra fractures and demonstrates excellent consistency. It provides valuable clinical guidance for the diagnosis and treatment of cervical vertebra fractures.
ABSTRACT
Objective To investigate the clinical effect of tenofovir alafenamide fumarate (TAF) on chronic hepatitis B (CHB) patients with low-level viremia (LLV) after entecavir (ETV) treatment. Methods A total of 160 CHB patients who received ETV antiviral therapy in Wuhan Jinyintan Hospital from March 2019 to October 2020 were enrolled and divided into experimental group and control group by propensity score matching, with 80 patients in each group. The patients in the experimental group were given TAF antiviral therapy, and those in the control group were given ETV treatment; the course of treatment was 24 weeks for both groups. The two groups were compared in terms of HBV-DNA clearance rate, HBeAg clearance rate, alanine aminotransferase (ALT) level, estimated glomerular filtration rate (eGFR), FIB-4 value, liver stiffness measurement, and adverse drug reactions after treatment. The t -test was used for comparison of continuous data between two groups, and the chi-square test was used for comparison of categorical data between two groups. Results After 24 weeks of treatment, compared with the control group, the experimental group had significantly higher HBV DNA clearance rate (96.25% vs 16.25%, χ 2 =104.03, P 0.05). Conclusion For CHB patients with LLV after ETV treatment, the change to TAF antiviral therapy can effectively increase their HBV DNA clearance rate and HBeAg clearance rate, improve liver and renal function, and reduce the degree of liver fibrosis, with good safety.
ABSTRACT
Objective:To investigate the role of Caveolin (Cav-3)/extracellular signal-regulated kinase (ERK) signaling pathway in reduction of myocardial ischemia-reperfusion (I/R) injury by morphine preconditioning in rats with chronic heart failure.Methods:Clean-grade healthy adult male Sprague-Dawley rats, weighing 200-250 g, were used in this study.Chronic heart failure was induced by ligating the left anterior descending coronary artery for 6 weeks.Thirty-six Langendorff-perfused hearts with chronic heart failure were divided into 4 groups ( n=9 each) by a random number table method: myocardial I/R group (group IR), morphine preconditioning group (group MP), morphine preconditioning plus methyl-β-cyclodextrin group (group MP+ MβCD), and methyl-β-cyclodextrin group (group MβCD). Global myocardial I/R was induced by 30 min ischemia followed by 120 min reperfusion.In group MP, after 15 min of equilibration, hearts were subjected to 3 cycles of 5 min perfusion with K-H solution containing 1 μmol/L morphine for preconditioning followed by 5 min perfusion with K-H solution, 30 min in total, and after the end of treatment, hearts were subjected to 30 min ischemia followed by 120 min reperfusion.In group MP+ MβCD, hearts were perfused with K-H solution containing 200 μmol/L methyl-β-cyclodextrin at 10 min before preconditioning with morphine, and the other treatments were similar to those previously described in group MP.In group MβCD, hearts were perfused with K-H solution containing 200 μmol/L methyl-β-cyclodextrin at 40 min before ischemia, and the other treatments were similar to those previously described in group IR.At the end of 15 min of equilibration (T 0) and 5 and 10 min of reperfusion (T 1, 2), coronary outflow was collected for determination of actate dehydrogenase (LDH) activity by chemical colorimetry.Myocardial infarct size (IS) and area at risk (AAR) were measured, and IS/AAR was calculated at the end of 120 min reperfusion.Myocardial tissues of left ventricle were taken to detect the expression of Cav-3, ERK1/2 and phosphorylated ERK1/2 (p-ERK1/2) by Western blot, and p-ERK1/2/ERK1/2 ratio was calculated. Results:Compared with group IR, IS, IS/AAR and LDH activity in coronary outflow were significantly decreased, the expression of Cav-3 was up-regulated, and p-ERK1/2/ERK1/2 ratio was increased in group MP ( P<0.05). Compared with group MP, IS, IS/AAR and LDH activity in coronary outflow were significantly increased, the expression of Cav-3 was down-regulated, and p-ERK1/2/ERK1/2 ratio was decreased in group MP+ MβCD ( P<0.05). Conclusions:The mechanism by which morphine preconditioning reduces I/R injury may be related to activation of Cav-3/ERK signaling pathway in rats with chronic heart failure.
ABSTRACT
Objective:To explore the difference in properties of anterior occipital condyle plate screws compared with common anterior occipitalcervical fusion internal fixation.Methods:A 28-year-old healthy adult male volunteer's CT data of the occiput and neck was selected to establish finite element models：including the normal model，simple artificial vertebral fixation model（special-shaped titanium cage+clival screws），anterior occipital condyle plate and screw fixation model，and clival plate and screw fixation model，then a 50 N gravity and a torque of 1.5 N m were exerted upon the upper surface of the occipital bone to make the model produce flexion and extension，lateral bending and rotation. The motion range，internal fixation stress distribution and occipital bone stress distribution of each model under varying conditions were compared.Results:Under the conditions of flexion，extension，lateral bending and rotation，the range of motion of the normal model was 18.65°，15.35°，9.82° and 34.68°，respectively；that of the simple artificial vertebral fixation model was 3.20°，3.63°，2.94° and 3.92°，respectively；that of the clival plate and screw fixation model was 0.40°，0.50°，0.35° and 0.89°，respectively；that of the anterior occipital condylar plate and screw fixation model was 0.27°，0.33°，0.13° and 0.30°，respectively. Compared with the simple artificial vertebral fixation model，the range of motion of the clival plate and screw fixation model decreased by 87.5%，86.2%，88.1% and 77.3% in flexion，extension，lateral bending and rotation. The range of motion of the anterior occipital condylar plate and screw fixation model decreased by 91.5%，90.1%，95.6% and 92.3%，respectively. Under the conditions of flexion and extension，lateral bending and rotation，the stress peak of the simple artificial vertebral fixation model was 52.3 MPa，51.9 MPa，52.6 MPa，respectively；that of the clival plate and screw fixation was 100.1 MPa，158.1 MPa，170.6 MPa，respectively；that of the anterior occipital condylar plate and screw fixation was 114.2 MPa，62.9 MPa，132.9 MPa，respectively. Under the condition of flexion and extension，lateral bending and rotation，the stress peak of the occipital bone in the simple artificial vertebral body internal fixation model was 52.9 MPa，50.9 MPa and 62.3 MPa，respectively；that of the clival plate and screw fixation model was 19.7 MPa，55.9 MPa and 38.3 MPa，respectively；that of the anterior occipital condylar plate and screw fixation model was 37.8 MPa，15.0 MPa and 16.3 MPa，respectively. The stress in bone near the hypoglossal canal was close to 0 MPa，much smaller than the stress peak in occipital bone.Conclusion:Anterior occipital condylar plate and screw fixation in front of the special-shaped titanium cage can improve the stability of occipitocervical fusion with little effect on the occipital bone and hypoglossal canal or without obvious stress concentration，and hence is a safe and reliable anterior fixation method for upper cervical spine instability.
ABSTRACT
Radiation-induced lung injury is a common complication of radiotherapy for thoracic tumor, usually involves the radiation-induced pneumonitis at early stage and radiation-induced pulmonary fibrosis at late stage, which seriously affects the treatment and prognosis of patients. At present the common treatments for radiation-induced pulmonary fibrosis include anti-inflammatory therapy, glucocorticoid therapy, antioxidant therapy and so on. Recentlywith the further research of radiation-induced pulmonary fibrosis, more and more attention has attracted in molecular targeted therapy. Molecular targeted inhibitors is a new class of drugs for the treatment of radiation-induced lung injury, mainly targeting a variety of cytokines, signaling pathways, tyrosine kinase receptors and other targets. This article systematically reviews the pathogenesis and molecular targeted therapy of radiation-induced lung injury.
ABSTRACT
Objective:To investigate the anatomical safety and feasibility ofposterior occipitocervical fixation with atlan-tooccipital-clivus screw.Methods:Data of 60 patients who treated in the spinal department of our hospital with upper cervical computed tomographic scans from February 2017 to November 2019 were retrospectively collected. Occipitocervical infection, injury, tumor and deformity were excluded. The Mimics software was used to reconstruct the occiput, atlas and measure the anatomical parameters, including the height and width of the anterior edge of the clivus, the height and width of the middle part of the clivus, the thinnest distance of the soft tissue in front of the clivus, the anteroposterior diameter, transverse diameter, the angle of inside tilting in coronary plane of the occipital condyle, the distance from the hypoglossal canal to the atlantooccipital articular surface, the anteroposterior diameter and transverse diameter of the superior joint of atlas, the height of the lateral mass, and the height and transverse diameter of the inferior articular process of the superior atlas joint. The three-dimensional digital modeling was performed and the screw diameter of 3.5mm was simulated. 3-Matic software were used to measure the screw placement parameters, including the inside tilting angle in coronary plane of screw, and the angle of upper tilting in sagittal plane and length of screw. The atlanto-occipital junction was exposed at the rear of 8 cadavers. According to the above parameters, the titanium alloy screws with a diameter of 3.5 mm were transferred from the inferior articular process and posterior arch of the atlas to the clivus through the atlantooccipital. Finally, the screw path was cut along the nail path with a pendulum saw, and the track of the screw was observed to confirm the safety and effectiveness of the screw.Results:The leading edge height and width of male clivus was 16.8±2.5 mm and 20.1±3.1 mm. The middle part of the clivus was 9.7±2.3 mm and 22.4±3.7 mm. The thinnest soft tissue in front of the clivus was 5.8±1.48 mm. The anteroposterior diameter of the occipital condyle was 19.1±1.9 mm, the transverse diameter was 12.6±2.0 mm, the inside tilting angle was 33.7°±4.5°, and the vertical distance from the lowest point of the neural tube to the articular surface of the occipital condyle was 9.6±1.1 mm. The height of the lateral mass of atlas was 12.9±2.4 mm, the anteroposterior diameter of the upper joint of atlas was 21.7±1.9 mm, and the transverse diameter was 11.7±1.4 mm. The width of the inferior facet was 14.9±1.4 mm and the height of the inferior facet was 5.7±0.85 mm. The distance from the screw entry point to the vertical line of the lateral mass migration midpoint was 2.5±0.6 mm; The distance from the screw entry point to the horizontal line of the midpoint was 2.3±0.7 mm.The inside titling angle of screw was 18.4°±1.6°, the upper tilting angle was 55.6°±3.1°, the length of the screw track was 53.0±2.8 mm, the adjustment range of upper tilting angle was 15.0±2.8 mm, the adjustment range of inside tilting angle was 10.4±2.4 mm. The anatomical parameters of females were slightly smaller than those of males, and the difference was statistically significant, but there was no significant difference between left and right parameters. The screws of 8 specimens could be inserted safely and effectively.Conclusion:Atlan-tooccipital-clivus screw can be implanted without damaging the nerve and vascular structure, and it can be used as a choice for occipitocervical fixation.
ABSTRACT
Objective:To investigate the efficacy of screw-rod fixation and fusion in revision surgery after percutaneous vertebroplasty (PVP) or percutaneous kyphoplasty(PKP) for osteoporotic vertebral fractures (OVFs).Methods:A retrospective case series study was carried out on clinical data of 19 patients treated by revision surgery after PVP or PKP at Zhejiang Ningbo No.6 Hospital from January 2014 to December 2017. There were 5 males and 14 females, with age of (70.7±6.0)years (range, 58-81 years). Injured segment was located at T 9 in 1 patient, T 11 in 3, T 12 in 5, L 1 fracture in 5, L 2 in 2, L 3 in 2 and L 4 in 1. Caused for revision and operation methods were as follows, 5 patients underwent debridement, screw-rod fixation and fusion due to infection, 9 patients underwent osteotomy due to progressive kyphosis, screw-rod fixation and fusion, 5 patients underwent spinal canal decompression, screw-rod fixation and fusion due to neurological dysfunction. The operation time, intraoperative blood loss, and perioperative complications were recorded. The white blood cell (WBC), erythrocyte sedimentation rate (ESR) and C-reactive protein (CRP) were used to evaluate the control of infection before operation, before discharge and at postoperative 3 months. The changes in Cobb angle were measured before and after operation and at the final follow-up. The American spinal injury association (ASIA) scale, visual analog scale (VAS) and Oswestry disability index (ODI) were evaluated at the final follow-up. Results:All patients were followed up for 24-46 months [(32.7±8.3)months]. The revision operation time was 135-320 minutes [(226.3±75.6)minutes]. The intraoperative blood loss was 350-1 500 ml [(825.5±230.6)ml]. There were 1 patient with poor wound healing, 2 with pulmonary infection, and 2 with hardware loosening. The WBC, ESR and CRP decreased from preoperative (9.2±1.7)×10 9/L, (88.7±19.2)mm/h, (58.7±22.9)mg/L to (7.3±0.9)×10 9/L, (42.5±13.7)mm/h, (37.3±16.3)mg/L before discharge, and (6.6±0.7)×10 9/L, (26.8±9.5)mm/h, (17.8±8.6)mg/L at postoperative 3 months ( P<0.01). The Cobb angle improved from preoperative (29.3±5.2)° to (4.8±1.2)° ofter operation and (7.3±1.6)° at the final follow-up ( P<0.05). The patients with ASIA grade C ( n=2) and grade D ( n=1) improved to grade E, and the patients with ASIA grade C ( n=2) improved to grade D at the final follow-up. Imagines showed good bone fusion in all patients at the last follow-up. The mean VAS decreased from preoperative (7.5±0.8)points to (2.1±0.5)points at the last follow-up ( P<0.05). The ODI decreased from preoperative (60.7±15.2)% to (19.9±5.9)% at the last follow-up ( P<0.05). Conclusion:For patients with OVFs undergoing revision surgery after PVP or PKP, debridement, kyphosis correction, spinal canal decompression combined with screw-rod fixation and fusion can reduce infection, correct kyphotic deformity, improve neurological function, relieve pain and improve quality of life.
ABSTRACT
Objective:To investigate the safety of posterior atlantoaxial transarticular screw combined with atlas pedicle screw fixation in Chinese.Methods:CT data of upper cervical spine in 48 patients were collected from Ningbo No.6 Hospital, including 26 males and 22 females aged 26-58 years [(37.3±13.5)years]. All CT data was transformed into 3D dimensional model and inserted with virtual screws by Mimics 19.0. Firstly, the vertical plane P 1 and the horizontal plane P 2 of the atlas were built in those atlantoaxial models, secondly the atlantoaxial transarticular screw S 0 was inserted by Margel method, and it's insertion point was located at 3 mm lateral and 2 mm cephalad in the C 2 inferior articular process. Finally, four atlas pedicle screws were inserted at the midline of atlas lateral mass. The four screws are inserted as follows. S 1: the screw was tangent to the lateral side of the S 0 or the medial of the atlas pedicle. S 2: the screw was tangent to the lateral wall of the atlas pedicle. S 3: the screw was tangent to the upper wall of the atlas pedicle. S 4: the screw was tangent to the inferior wall of the atlas pedicle. The angles between S 1, S 2 and P 1 as the camber angle, and the angle between S 3, S 4 and P 2 as the gantry angle were measured. Then the safety range of camber angle and gantry angle were calculated, and the screw length of S 1, S 2, S 3 and S 4 was measured. In all models, the camber angle and gantry angle of the screws were adjusted an interval of 2°, the number of successful cases was calculated and the success rate of insertion was calculated. Results:All 3D models were inserted successfully. The minimum value, maximum value and safety range of the camber angle of atlas pedicle screws were (-6.7±5.2)°, (10.4± 4.3)°, (17.1±3.7)°, respectively; and of the gantry angle were (-0.5±3.5)°, (11.0±5.8)°, (11.5±4.9)°, respectively. The length of screw placement was S 1: (31.1±2.4)mm, S 2: (28.3±2.5)mm, S 3: (29.2±3.8)mm, S 4: (29.6±3.0)mm, respectively ( P<0.05). When the camber angle was from -1°to 5°, the success rate of screw placement was 87.5%; when inserting with 2° camber angle, the success rate was 100%; when the gantry angle was 5°, the success rate was 93.8%. Conclusion:The posterior atlantoaxial transarticular screw combined with atlas pedicle screw can achieve satisfy insertion length and success rate.
ABSTRACT
Objective To compare the clinical efficacy of posterior atlantoaxial screw-rod fixation combined with spinous process muscle-vessel complex bone graft or iliac bone graft for atlantoaxial instability.Methods A retrospective case-control study was conducted to analyze the clinical data of 56 patients with atlantoaxial instability admitted to the Sixth Hospital of Ningbo from September 2014 to October 2016.There were 35 males and 21 females,with the age range from 9 to 59 years [(50.3 ±3.2) years].A total of 26 patients were treated with posterior atlantoaxial screw-rod fixation combined with spinous process muscle-vessel complex bone graft (complex group),while 30 patients were treated with iliac bone graft (ilium group).Patients showed different degrees of neck pain and limited neck activity preoperatively.X-ray films and three-dimensional CT examination of the cervical spine were taken before and after operation for evaluating the atlantoaxial reduction,bone graft fusion and internal fixation.The operation time,intraoperative bleeding,bone fusion time,visual analogue scale (VAS),Japanese Orthopaedic Association (JOA) score,atlantodental interval (ADI) and axial symptoms were compared between the two groups,and the complications were recorded.Results Both groups were followed up for 24-30 months,with an average of 27.4 months.In the complex group and the ilium group,the operation time was (2.21 ±0.25) hours and (2.72 ±0.26) hours (P ＜0.01);the intraoperative blood loss was (227.3 ± 45.4) ml and (277.7 ± 43.4) ml,respectively (P ＜ 0.05);the bone fusion time was (6.9 ±0.5) months and (8.1 ± 1.8) months (P ＞ 0.05),respectively.In the complex group,the VAS was (5.45 ± 0.69)points before operation,(2.64 ± 0.51)points at the follow-up one month after operation,(0.91 ± 0.7) points at the follow-up 12 months after operation,and (0.45 ± 0.16) points at the follow-up 24 months after operation;and in the ilium group,the VAS was (5.18 ± 0.75) points,(2.45 ± 0.52)points,(1.27 ± 0.19) points and (0.41 ± 0.18) points correspondingly.In terms of VAS,there were significant differences before and after operation within each group (P ＜ 0.01),while there were no significant differences between the two groups at different time points (P ＞ 0.05).In the complex group,the JOA score was (10.82 ± 0.35) points before operation,(12.73 ± 0.65) points at the follow-up one month after operation,(15.18 ±0.61) points at the follow-up 12 months after operation,and (15.64 ±0.15) points at the follow-up 24 months after operation;and in the ilium group,the JOA score was (10.73 ± 1.19) points,(13.01 ± 0.63) points,(14.73 ± 0.91) points and (15.55 ± 0.51) points correspondingly.In terms of JOA score,there were significant differences between before and after operation within each group (P ＜ 0.01),while there were no significant differences between the two groups at different time points (P ＞ 0.05).In the complex group,the ADI was (2.28 ± 0.59) mm before operation,(1.83 ± 0.56)mm at the follow-up one month after operation,(1.71 ± 0.56)mm at the follow-up 12 months after operation,and (1.59 ± 0.67)mm at the follow-up 24 months after operation;and in the ilium group,the ADI was (2.23 ± 0.60) mm,(1.80 ± 0.18) mm,(1.67 ± 0.69) mm and (1.62 ± 0.53) mm correspondingly.In terms of ADI,there were significant differences between before and after operation within each group (P ＜ 0.01),while there were no significant differences between the two groups at different time points (P ＞ 0.05).The axial symptom scores were graded as excellent in 23 patients and good in three patients of the complex group while excellent in 21 patients and good in nine patients in the ilium group (P ＞ 0.05).There were no patients with spinal nerve injury caused by pedicle screw placement after operation.One patient in the ilium group had incision errhysis and recovered after dressing change,and other patients had no incision infection.Conclusions For atlantoaxial instability,posterior atlantoaxial screw-rod fixation combined with spinous process muscle-vessel complex bone graft or autogenous iliac bone graft can both achieve satisfactory clinical results.The spinous process-muscle-vascellum complex graft has less operation time and intraoperative bleeding than the autogenous iliac bone graft,which can be a feasible alternative operation.
ABSTRACT
Objective@#To investigate the efficacy of microscope-assisted free-hand atlantal pedicle screw technique for unstable atlas burst fracture.@*Methods@#A retrospective case control study was conducted to analyze the clinical data of 48 patients with unstable atlas burst fracture admitted to Ningbo No.6 hospital from January 2016 to June 2018. There were 32 males and 16 females, aged 24-72 years [(49.5±15.2 years)]. A total of 22 patients were treated with the technique of atlas screw placement by drill under microscope (Group A), including 14 males and eight females, aged 24-68 years. Twenty six patients (Group B) were treated with atlantal pedicle screw placement by hand, including 18 males and 8 females, aged 26-72 years [(50.7±15.4 years)]. The operation time, intraoperative blood loss and the times of intraoperative fluoroscopy were compared between the two groups. X-ray and CT were reexamined to evaluate the accuracy of screw placement within one week after operation. The visual analogue score (VAS) and cervical dysfunction index (NDI) were compared before operation and 1 year after operation. The intraoperative complications were recorded. One year after operation, X-ray and CT were reexamined to observe fracture healing, atlantoaxial fusion and failure of internal fixation.@*Results@#Group A was followed up for 12-24 months [(18.4±6.8)months], and Group B for 12-24 months [(17.4±7.2)months]. The amount of intraoperative bleeding [(180.5±60.8) ml] and the times of intraoperative fluoroscopy [(1.3±0.8) times] in Group A were significantly lower than those in Group B [(280.1±80.2) ml, (2.2±0.8) times] (P<0.05), but there was no significant difference in the time of operation and the accuracy of screw placement (P>0.05). There were statistically significant differences in VAS and NDI before operation and one year after operation in both groups (P<0.05), but there was no significant difference between the two groups (P>0.05). No serious complications such as vertebral artery, nerve root and spinal cord injury occurred. One year follow-up CT showed healed fracture or continuous bone bridge passing through the atlantoaxial intervertebral space. Except for one patient in Group B with lost reduction, other patients had no loosening or fracture of internal fixation.@*Conclusion@#Compared with screw placement by hand, the pedicle screw placement by drill under the microscope can reduce the amount of bleeding and the times of fluoroscopy.
ABSTRACT
Objective@#To investigate the accuracy and feasibility of individual 3D printing model for pedicle screw placement in treating patients with upper cervical spine fracture.@*Methods@#A retrospective case control study was conducted to analyze the clinical data of 30 patients with upper cervical spine fracture admitted to Ningbo No.6 Hospital from August 2013 to December 2018. There were 19 males and 11 females, aged 45-67 years with an average age of 53.5 years. The 15 patients in the study group were treated with pedicle screw fixation and another 15 patients in the control group were treated with traditional freehand screw fixation. A total of 120 pedicle screws were implanted, with 60 screws in each group. The operation time, intraoperative blood loss, preoperative and postoperative visual analogue score (VAS), Japan Orthopedic Association (JOA) score were recorded. The position and grade of screws were evaluated according to Kawaguchi's evaluation method of screw grade after operation. The patients took monthly reexamination for the first three months after discharge. In the first two months after discharge, the patients took X-ray examination for observation of screw loosening or rupture of internal fixation. At the third month after operation, the patients took CT of cervical spine for observation of bone healing and fusion.@*Results@#The mean follow-up duration was 17.8 months (range, 13-21 months). The study group had shorter operation time (99.13±3.04)minutes compared with the control group (107.00±6.92) minutes (P<0.01). There were no significant differences in intraoperative blood loss, preoperative VAS, JOA scores before operation and 1 year after operation between the two groups (P>0.05), but the VAS in study group was significantly lower than that in control group (P<0.05). In the study group, the VAS score 1 year after operation [(2.3±0.5)points] was lower than that before the operation [(7.7±0.7)points], and the JOA score [(16.8±0.4)points] was significantly higher than that before the operation [(15.9±0.7)points](P<0.01). In the control group, the VAS 1 year after operation [(2.5±0.5)points] was significantly lower than that before operation [(7.5±0.5)points] (P<0.01), and the JOA score [(16.5±0.5)points] was significantly higher than that before operation [(15.9±0.8)points] (P<0.05). In the study group, according to the CT results, there were 28 atlas pedicle screws of grade 0 (93.3%), two of grade 1 (6.7%), 0 of grade 2, 0 of grade 3, and there were 27 axial pedicle screws of grade 0 (90.0%), three of grade 1 (10.0%), 0 of grade 2, and 0 of grade 3. In the control group, there were 25 atlas pedicle screws of grade 0 (83.3%), four of grade 1 (13.3%), one of grade 2 (3.4%), 0 of grade 3, and there were 27 axial pedical screws of grade 0 (90.0%), three of grade 1 (10.0%), 0 of grade 2, and 0 of grade 3. There was no significant difference in the accuracy of pedicle screw placement between the two groups (P>0.05). No serious complications such as spinal cord or vertebral artery injury occurred. At 3 months after operation, CT showed that the fracture of cervical vertebra healed.@*Conclusion@#Individualized 3D printed cervical spine model can guide the pedicle screw placement for upper cervical spine fracture, which can shorten the operation time, reduce the postoperative pain of patients, improve the accuracy of screw placement, and reduce the risks related to operation.
ABSTRACT
Objective@#To compare the clinical efficacy of posterior atlantoaxial screw-rod fixation combined with spinous process muscle-vessel complex bone graft or iliac bone graft for atlantoaxial instability.@*Methods@#A retrospective case-control study was conducted to analyze the clinical data of 56 patients with atlantoaxial instability admitted to the Sixth Hospital of Ningbo from September 2014 to October 2016. There were 35 males and 21 females, with the age range from 9 to 59 years [(50.3±3.2)years]. A total of 26 patients were treated with posterior atlantoaxial screw-rod fixation combined with spinous process muscle-vessel complex bone graft (complex group), while 30 patients were treated with iliac bone graft (ilium group). Patients showed different degrees of neck pain and limited neck activity preoperatively. X-ray films and three-dimensional CT examination of the cervical spine were taken before and after operation for evaluating the atlantoaxial reduction, bone graft fusion and internal fixation. The operation time, intraoperative bleeding, bone fusion time, visual analogue scale (VAS), Japanese Orthopaedic Association (JOA) score, atlantodental interval (ADI) and axial symptoms were compared between the two groups, and the complications were recorded.@*Results@#Both groups were followed up for 24-30 months, with an average of 27.4 months. In the complex group and the ilium group, the operation time was (2.21±0.25)hours and (2.72±0.26)hours (P<0.01); the intraoperative blood loss was (227.3±45.4)ml and (277.7±43.4)ml, respectively (P<0.05); the bone fusion time was (6.9±0.5)months and (8.1±1.8)months (P>0.05), respectively. In the complex group, the VAS was (5.45±0.69)points before operation, (2.64±0.51)points at the follow-up one month after operation, (0.91±0.7)points at the follow-up 12 months after operation, and (0.45±0.16)points at the follow-up 24 months after operation; and in the ilium group, the VAS was (5.18±0.75)points, (2.45±0.52)points, (1.27±0.19)points and (0.41±0.18)points correspondingly. In terms of VAS, there were significant differences before and after operation within each group (P<0.01), while there were no significant differences between the two groups at different time points (P>0.05). In the complex group, the JOA score was (10.82±0.35)points before operation, (12.73±0.65)points at the follow-up one month after operation, (15.18±0.61)points at the follow-up 12 months after operation, and (15.64±0.15)points at the follow-up 24 months after operation; and in the ilium group, the JOA score was (10.73±1.19)points, (13.01±0.63)points, (14.73±0.91)points and (15.55±0.51)points correspondingly. In terms of JOA score, there were significant differences between before and after operation within each group (P<0.01), while there were no significant differences between the two groups at different time points (P>0.05). In the complex group, the ADI was (2.28±0.59)mm before operation, (1.83±0.56)mm at the follow-up one month after operation, (1.71±0.56)mm at the follow-up 12 months after operation, and (1.59±0.67)mm at the follow-up 24 months after operation; and in the ilium group, the ADI was (2.23±0.60)mm, (1.80±0.18)mm, (1.67±0.69)mm and (1.62±0.53)mm correspondingly. In terms of ADI, there were significant differences between before and after operation within each group (P<0.01), while there were no significant differences between the two groups at different time points (P>0.05). The axial symptom scores were graded as excellent in 23 patients and good in three patients of the complex group while excellent in 21 patients and good in nine patients in the ilium group (P>0.05). There were no patients with spinal nerve injury caused by pedicle screw placement after operation. One patient in the ilium group had incision errhysis and recovered after dressing change, and other patients had no incision infection.@*Conclusions@#For atlantoaxial instability, posterior atlantoaxial screw-rod fixation combined with spinous process muscle-vessel complex bone graft or autogenous iliac bone graft can both achieve satisfactory clinical results. The spinous process-muscle-vascellum complex graft has less operation time and intraoperative bleeding than the autogenous iliac bone graft, which can be a feasible alternative operation.
ABSTRACT
Objective To investigate the efficacy of microscope-assisted free-hand atlantal pedicle screw technique for unstable atlas burst fracture.Methods A retrospective case control study was conducted to analyze the clinical data of 48 patients with unstable atlas burst fracture admitted to Ningbo No.6 hospital from January 2016 to June 2018.There were 32 males and 16 females,aged 24-72 years [(49.5 ± 15.2 years)].A total of 22 patients were treated with the technique of atlas screw placement by drill under microscope (Group A),including 14 males and eight females,aged 24-68 years.Twenty six patients (Group B) were treated with atlantal pedicle screw placement by hand,including 18 males and 8 females,aged 26-72 years [(50.7 ± 15.4 years)].The operation time,intraoperative blood loss and the times of intraoperative fluoroscopy were compared between the two groups.X-ray and CT were reexamined to evaluate the accuracy of screw placement within one week after operation.The visual analogue score (VAS) and cervical dysfunction index (NDI) were compared before operation and 1 year after operation.The intraoperative complications were recorded.One year after operation,X-ray and CT were reexamined to observe fracture healing,aflantoaxial fusion and failure of internal fixation.Results Group A was followed up for 12-24 months [(18.4 ± 6.8)months],and Group B for 12-24 months [(17.4 ± 7.2) months].The amount of intraoperative bleeding [(180.5 ±60.8) ml] and the times of intraoperative fluoroscopy [(1.3 ±0.8) times] in Group A were significantly lower than those in Group B [(280.1 ± 80.2) ml,(2.2 ± 0.8) times] (P ＜ 0.05),but there was no significant difference in the time of operation and the accuracy of screw placement (P ＞ 0.05).There were statistically significant differences in VAS and NDI before operation and one year after operation in both groups (P ＜ 0.05),but there was no significant difference between the two groups (P ＞ 0.05).No serious complications such as vertebral artery,nerve root and spinal cord injury occurred.One year follow-up CT showed healed fracture or continuous bone bridge passing through the atlantoaxial intervertebral space.Except for one patient in Group B with lost reduction,other patients had no loosening or fracture of internal fixation.Conclusion Compared with screw placement by hand,the pedicle screw placement by drill under the microscope can reduce the amount of bleeding and the times of fluoroscopy.
ABSTRACT
Objective To investigate the accuracy and feasibility of individual 3D printing model for pedicle screw placement in treating patients with upper cervical spine fracture.Methods A retrospective case control study was conducted to analyze the clinical data of 30 patients with upper cervical spine fracture admitted to Ningbo No.6 Hospital from August 2013 to December 2018.There were 19 males and 11 females,aged 45-67 years with an average age of 53.5 years.The 15 patients in the study group were treated with pedicle screw fixation and another 15 patients in the control group were treated with traditional freehand screw fixation.A total of 120 pedicle screws were implanted,with 60 screws in each group.The operation time,intraoperative blood loss,preoperative and postoperative visual analogue score (VAS),Japan Orthopedic Association (JOA) score were recorded.The position and grade of screws were evaluated according to Kawaguchi's evaluation method of screw grade after operation.The patients took monthly reexamination for the first three months after discharge.In the first two months after discharge,the patients took X-ray examination for observation of screw loosening or rupture of internal fixation.At the third month after operation,the patients took CT of cervical spine for observation of bone healing and fusion.Results The mean follow-up duration was 17.8 months (range,13-21 months).The study group had shorter operation time (99.13 ± 3.04)minutes compared with the control group (107.00 ± 6.92) minutes (P ＜ 0.01).There were no significant differences in intraoperative blood loss,preoperative VAS,JOA scores before operation and 1 year after operation between the two groups (P ＞ 0.05),but the VAS in study group was significantly lower than that in control group (P ＜ 0.05).In the study group,the VAS score 1 year after operation [(2.3 ± 0.5) points] was lower than that before the operation [(7.7 ± 0.7) points],and the JOA score [(16.8 ± 0.4) points] was significantly higher than that before the operation [(15.9 ± 0.7) points] (P ＜ 0.01).In the control group,the VAS 1 year after operation [(2.5 ± 0.5) points] was significantly lower than that before operation [(7.5 ±0.5)points] (P ＜0.01),and the JOA score [(16.5 ±0.5)points] was significantly higher than that before operation [(15.9 ± 0.8)points] (P ＜ 0.05).In the study group,according to the CT results,there were 28 atlas pedicle screws of grade 0 (93.3％),two of grade 1 (6.7％),0 of grade 2,0 of grade 3,and there were 27 axial pedicle screws of grade 0 (90.0％),three of grade 1 (10.0％),0 of grade 2,and 0 of grade 3.In the control group,there were 25 atlas pedicle screws of grade 0 (83.3％),four of grade 1 (13.3％),one of grade 2 (3.4％),0 of grade 3,and there were 27 axial pedical screws of grade 0 (90.0％),three of grade 1 (10.0％),0 of grade 2,and 0 of grade 3.There was no significant difference in the accuracy of pedicle screw placement between the two groups (P ＞ 0.05).No serious complications such as spinal cord or vertebral artery injury occurred.At 3 months after operation,CT showed that the fracture of cervical vertebra healed.Conclusion Individualized 3D printed cervical spine model can guide the pedicle screw placement for upper cervical spine fracture,which can shorten the operation time,reduce the postoperative pain of patients,improve the accuracy of screw placement,and reduce the risks related to operation.
ABSTRACT
Objective To assess the effects of axial spinous process-muscle-vascellum complex transplantation for posterior atlantoarial fusion.Methods Data of 27 cases with altantoarial disease who were treated by posterior atlantoarial fusion using axial spinous process-muscle-vascellum complex transplantation from June 2015 to June 2016 were retrospectively analyzed.There were 19 males and 8 females aged from 9 to 68 years old (mean,41.0±15.4 years old).Two cases were diagnosed with atlanto-axial instability.Fourteen cases were diagnosed with atlas fracture and eleven cases were diagnosed atlanto-axial fracture.All the 27 patients suffered from neck pain or limitations of cervical motion.All patients were assessed clinically by atlantoaxial reduction and bone graft fusion.The pre-operative and post-operative atlanto-dens interval (ADI),visual analogue scale (VAS),Japanese Orthopaedic Association scores (JOA),improvement rate of JOA score and axial symptoms were measured and statistically analyzed.Complications were recorded.Clinical outcome of latest follow-up was evaluated by X-ray and CT scan.Results The time of operation was 2.0-2.5 h and blood loss was 150-300 ml.All the patients were followed-up for 9 to 18 months (mean,11.5±2.1 months).The VAS of neck pain improved from 3.6±2.7 (range,2.0-5.0) pre-operatively to 1.4±0.2 (range,0-2.0) 12 months postoperatively (P=0.000).The JOA score improved from 11.7± 1.9 (range,10.0-15.0) pre-operatively to 15.3±0.6 (range,14.0-17.0)12 months post-operatively (P=0.000).The improvement rate of JOA score at the latest follow-up was 54.1％± 12.4％,including 23 cases (85.19％) excellent,and 4 cases (14.81％) good.The results of axial symptoms were no-symptom in 22 cases (81.48％) and mild symptoms in 5 cases (18.52％).Postoperative cervical spine X-ray and CT showed that the sagittal cervical spine alignment was restored.There was statistically significant difference between ADI of 4.3±1.1 mm (range,3.9-4.5 mm) pre-operatively to 2.5± 0.4 mm (range,2.1-2.6 mm) 12 months post-operatively,which was improved significantly (P=0.000).There were no complications found during the follow-up.Conclusion The application of axial spinous process-muscle-vascellum complex transplantation for posterior atlantoaxial fixation can preserve the dynamic function of muscles and reduce the postoperative pain,as well as avoid donor site morbidity.
ABSTRACT
Objective To evaluate the efficacy of proximal percutaneous pedicle screw fixation combined with distal open osteotomy for sagittal plane imbalance of adult spinal deformity.Methods From January 2011 to June 2015,23 patients with diagnosis of adult spinal deformity were treated with proximal percutaneous pedicle screw fixation combined with distal open osteotomy,there were 8 males and 15 females,aged from 52 to 67 years old (average,62.1 years old).The operation time,blood loss,drainage and perioperative complications were recorded;standing anteroposterior and lateral radiographs of the whole spine were taken and the following parameters were measured:sagittal vertical axis (SVA),lumbar lordosis(LL),pelvic tilt (PT),sacral slope (SS),pelvic incidence/lumbar lordosis mismatch (PI-LL),the above parameters were compared between preoperation and postoperation.Oswestry disability index (ODI) was used to evaluate the clinical efficacy.Results The mean operation time was 253.9±52.1 min,the mean blood loss and drainage was 1 258.5±272.2 ml and 725.1 ± 135.2 ml.No patient got infected,died or had deep vein thrombosis.All patients were followed up for an average of 21.2 months (range,13-52 m).The SVA was restored from 12.6±1.4 cm to 3.5±0.7 cm.In addition,LL,SS,PT,and PL-LL were improved from 13.5°±2.3°,13.9°±2.3°,29.7°±9.6°,29.5°±13.7° to 38.8°±9.6°,25.5°±5.8°,18.9°±8.2°,7.1°±3.6°.The ODI score decreased from 40.3％±12.5％ to 13.6％±2.57％ at the time of the last follow-up compared with preoperation.Conclusion Proximal percutaneous pedicle screw fixation combined with distal open osteotomy for sagittal plane imbalance of adult spinal deformity could restore the sagittal balance and improve the quality of life.
ABSTRACT
Objective To explore preliminarily the effects of preoperative depression condition in patients with breast cancer on the efficacy of intravenous analgesia with dezocine and the serum level of 5 hydroxytryptamine.Methods Sixty patients with breast cancer were assessed with Hamilton depression scale (HAMD).The total patients were divided into three groups according to HAMD scores,including normal group (26 cases),suspicious group (22 cases),and depression group (12 cases).The postoperative analgesia was facilitated with patients intravenous control analgesia with dezocine and the postoperative pain was assessed by visual analogue scale (VAS) at 2 hours,12 hours,and 24 hours.Yhe serum concentration of 5 hydroxytryptamine was measured by enzyme-linked immunosorbent assays before anesthesia,2 hours after surgery beginning,and 24 hours after surgery.Results The postoperative VAS at 12 hours and 24 hours in suspicious group and in depression group were higher than those in normal group (P ＜ 0.05).There was no statistical difference between depression and suspicious groups (P ＞ 0.05).The serum concentrations of 5 hydroxytryptamine in three groups increased obviously at 2 hours after surgery beginning (P＜0.05),and then decreased at 24 hours postoperation.The serum concentrations of 5 hydroxytryptamine in suspicious group and depression group at three measurement point were significantly lower than those in normal group (P ＜0.05).The serum concentrations of 5 hydroxytryptamine in depression group at three measurement point were significantly lower than those in suspicious group (P ＜ 0.05).Conclusions Under this preliminary study condition,the preoperative severity of the depression in patients with breast cancer may affect the analgesia effect of patients intravenous control analgesia with dezocine and maybe have some relationships with serum levels of 5 hydroxytryptamine.
ABSTRACT
Objective To explore the perioperative efficiency and safety of different regimen of tranexamic acid (TXA) in total knee arthroplasty (TKA).Methods From February 2013 to May 2013,150 female patients with knee osteoarthritis underwent unilateral TKA were randomly divided into three groups,50 cases in each group.Patients received 10 mg/kg TXA by fast intravenous infusion before closing the wound in first group (single dose group),patients in second group received two doses of 10 mg/kg TXA before closing the wound and 3 hours postoperation (repeated dose group),patients in the third group didn't receive TXA (control group).The postoperative blood loss via drainage,the total blood loss,the hidden blood loss,the postoperative hemoglobin concentration at different times and the numher of patients need blood transfusion were recorded.All patients were observed for detecting deep vein thrombosis (DVT) by the color doppler ultrasonography within 5 days postoperation,and the symptomatic DVT and pulmonary embolism (PE) were observed within 90 days postoperation.Results The blood loss via drainage was significantly less in the single dose group (273.6±99.6 ml) and repeated dose group (168.5±80.8 ml) compared with the control group (447.2±101.9 ml),and it was significantly less in the repeated dose group than the single dose group; the total blood loss was significantly less in the single dose group (959.1±291.7 ml) and repeated dose group (818.7±206.9 ml) compared with the control group (1 100.8±288.3 ml),and it was significantly less in the repeated dose group than in the single dose group; there was no differ ences about the hidden blood loss among the three groups.The hemoglobin concentration was significantly higher in the single dose group and repeated dose group than in the control group in day 1,3 and 5 postoperation; and it was significantly higher in the repeated dose group compared with the single dose group.The ratio of transfusion was significantly less in the single and repeated dose groups than in the control group,but no differences exists between the single dose group and repeated dose group.There was no DVT in all of the three groups within 5 days postoperation,and there was no symptomatic DVT and PE in all of the three groups within 90 days.Conclusion 10 mg/kg of TXA infused intravenous before closing the wound is effective and safe in TKA,another dose 3 hours postoperation is much more effective and will not increase the danger of DVT and PE.
ABSTRACT
Objective To compare the effects of preload with intravenous infusion of 6％ hydroxyethyl starch combined with phenylephrine or dopamine to prevent the hypotension after combined epiduralspinal anesthesia in parturient undergoing caesarean section.Methods Eighty patients with ASA class Ⅰ or Ⅱ[,were randomly divided into Dopamine group and Phenylephrine group,40 cases in each group.The 6％hydroxyethyl starch 500 ml was infused at the tate of 20 ml/(kg · h) after the intravenous catheterization was established and after the finishing of the infusion of 250 ml,the dopamine 5 mg (Dopamine group) or 200 ug phenylephrine (Phenylephrine group) were added respectively in residual liquid.After the bupivacaine was injected into the subarachnoid space,the intravenous infusion was continued at the same rate until the fetus was taken out and the blood pressure and heart rate were measured at intervals of 1 min.The blood sample of fetal cord was taken to measure ther troponin Ⅰ concentration.Results The incidence of hypotension after combined epidural-spinal anesthesia anesthesia in dopamine group (2/40) and in phenylephrine group (3/40) was with no statistical difference (P ＞ 0.05) ;The incidence of bradycardia in dopamine group (0/40) was significantly lower than that in phenylephrine group (6/40)) (P ＜0.05) ; The incidence of tachycardia in dopamine group (8/40) was significantly higher than that in phenylephrine group (1/40) (P ＜0.05) ; The troponin Ⅰ concentration of fetal cord blood in dopamine group [(0.21 ±0.07) ng/ml] and in phenylephrine group [(0.18 ±0.09)ng/ml]was with no statistical difference (P ＞0.05).Conclusion Preload with intravenous infusion of 6％ hydroxyethyl starch combined with phenylephrine or dopamine can effectively prevent the hypotension after combined epidural-spinal anesthesia in parturient undergoing caesarean section with no significant effect on the fetus and both can be chosen in terms of the heart rate of parturient before anesthesia.
ABSTRACT
Objective To study the impacts of berberine on the growth, migration and radiosensitivity in human breast cancer cells.Methods MTT assay was used to evaluate cell growth.In vitro scratch migration assay was used to determine cell migration.Annexin V assay was used to detect cell apoptosis.The distribution of cell cycle was evaluated by flow cytometry assay.Colony formation assay was used to detect the influence of berberine on cell radiosensitivity. Western blot assay was employed to measure protein expression.Results Berberine inhibited cell growth and migration in two human breast cancer cell lines, MCF-7 and MDA-MB-231, in a dose-and time-dependent manner. Furthermore,berberine resulted in a cell cycle G0/G1 arrest.Compared with control,the early apoptosis in MDA-MB-231 and MCF-7 cells treated with 40 pμmol/L of berberine was as high as 86.6％ and 66.6％ (t =8.79,10.32,P ＜ 0.01 ),respectively. Berberine caused a dose-dependent increase in Bax and Caspase-3 protein expressions,but did not change Cyclin D1 protein expression,while suppressed the expressions of Cyclin B1 and Bcl-2 protein. As analyzed with multi-target click model fitting curves,the SERD0 of berberine-treated cells were 1.12 and 1.22 for MDA-MB-231 and MCF-7cells respectively at the dose D0 of X-rays.Conclusions The berberine inhibited the growth and migration of breast cancer cells via apoptosis induction and cell cycle arrest.Moreover,berberine increases cell sensitivity to X-ray irradiation.