Comparative evaluation of three methods of adhesive remnant removal after orthodontic bracket debonding

ABSTRACT Objective: This study aimed to assess the effects of three methods of adhesive remnant removal (carbide bur and low speed handpiece, carbide bur and high speed handpiece, and zircon-rich glass fiber reinforced composite bur), after orthodontic bracket debonding, on tooth color and enamel surface roughness. Methods: Ninety sound premolar teeth were selected. The baseline tooth color was assessed using Vita spectrophotometer. The teeth were subjected to bracket bonding processes and then randomly divided into three equal groups. In each group, composite remnant was removed by one of the three methods of adhesive removal, and the teeth were then subjected to color assessment again. To measure the surface roughness, a scanning electron microscope (SEM) with x400 magnification was used. Results: ANOVA showed that the effect of the three methods of adhesive remnant removal on ∆L, ∆b and ∆E was statistically significant (p=0.01), but without significant effect on ∆a. Comparison of the means showed that composite bur and high speed carbide bur yielded the highest ∆E (p=0.05), and had a significant difference when compared to carbide bur and low speed handpiece. The highest ∆L and ∆b values belonged to samples approached with composite bur and carbide bur with high speed handpiece, respectively. SEM analysis showed that the composite bur created a very smooth surface, compared to the other two methods. Conclusion: Zircon-rich glass fiber reinforced composite created the smoothest enamel surface and highest color change, when compared to the other two methods.

RESUMO Objetivo: O presente estudo teve como objetivo avaliar os efeitos de três métodos de remoção de adesivo remanescente (broca carbide e peça de mão em baixa rotação, broca carbide e peça de mão em alta rotação, e broca de compósito reforçado com fibra de vidro rica em zircônia), após a descolagem de braquetes ortodônticos, sobre a cor dos dentes e rugosidade superficial do esmalte. Métodos: Noventa pré-molares hígidos foram selecionados. A cor inicial dos dentes foi avaliada usando um espectrofotômetro Vita. Os dentes foram submetidos à etapa de colagem dos braquetes e, então, divididos aleatoriamente em três grupos. Em cada grupo, o adesivo remanescente foi removido usando um dos três métodos de remoção, e os dentes foram novamente submetidos à avaliação de cor. Para medir a rugosidade superficial dos dentes, foi usado um microscópio eletrônico de varredura (MEV) com aumento de 400x. Resultados: A ANOVA mostrou que os três métodos de remoção do adesivo remanescente tiveram efeito estatisticamente significativo (p=0,01) em ∆L, ∆b e ∆E, mas sem efeito significativo em ∆a. A comparação das médias mostrou que a broca de compósito e a broca carbide em alta rotação produziram o maior ∆E (p=0,05) e tiveram uma diferença significativa quando comparadas com a broca carbide e a peça de mão em baixa rotação. Os maiores valores de ∆L e ∆b foram encontrados, respectivamente, nos grupos com broca de compósito e broca carbide usando peça de mão em alta rotação. A análise MEV mostrou que o uso da broca de compósito resultou em uma superfície muito lisa, em comparação com os outros dois métodos. Conclusão: Em comparação aos outros métodos, a broca de compósito reforçado com fibra de vidro rica em zircônia criou a superfície de esmalte mais lisa e resultou em uma maior mudança de cor.

Depression in Orthodontic Patients

This study aimed to determine the prevalence of depression in a group of patients referred for orthodontic treatments which can be helpful in the better and more successful treatment planning. METHODSBeck’s depression inventory was administered to 350 patients in the age group of 16 - 29 years who were referred to the Department of Orthodontics. Each patient was examined by the orthodontist for type of malocclusion classifications and finally the relation between the severity of the depression and the type of malocclusion was determined. SPSS software was used for analysing the data using the chi-square, one-way Anova, t-test and Tukey’s test. The significance was set at 0.05. RESULTSPrevalence of depression among class I, II, and III patients was 22.4%, 32.7% and 39.6%, respectively. There was no significant relation between gender, marital status, educational status, and depression (p>0.05). However, there was a significant relation between types of malocclusion and depression (p<0.05). The relation between class I and class III malocclusions and depression was significantly different, with the highest depression prevalence in Class III patients (p = 0.003). CONCLUSIONSThere is a relatively high prevalence of depression among orthodontic patients, especially among patients with Angle's class III malocclusion.

Comparison of antibacterial effects of orthodontic composites containing different nanoparticles on Streptococcus mutans at different times

ABSTRACT Introduction: Plaque accumulation can cause white spot lesions. Adding nanoparticles to composites can be effective in reducing the number and function of microorganisms. Objective: The aim of this study was to evaluate the antibacterial effects of orthodontic composites containing different nanoparticles on Streptococcus mutans at different times. Methods: Hydroxyapatite, titanium oxides, zinc oxide, copper oxide and silver oxide nanoparticles were prepared at 0.5% and 1% weight concentrations. Accordingly, ten study groups and one control group were obtained. Then, 26 composite discs were prepared from each group. Strain of Streptococcus mutans was cultured, and colonies of Streptococcus mutans were counted. Further bacterial culture was swapped onto enriched Mueller-Hinton agar. The composites were placed on the culture medium, and after incubation the diameter of growth inhibition was measured. To investigate the long-term effect of nanoparticles, the colonies were counted at days 3, 15 and 30. Results: The results showed that 1% copper oxide and 1% silver oxide significantly reduced the number of bacteria (p< 0.05), but there was no significant difference between the other groups and control group (p> 0.05). At day three, there was a significant difference between control group and 0.5% silver oxide, 1% silver oxide and 1% copper oxide groups (p< 0.05). However, colonies had grown in all groups at day 30 but showed no significant difference with control group (p> 0.05). Conclusion: Addition of 1% copper oxide and 1% silver oxide has short-term antibacterial effects, so the clinical use of these nanoparticles cannot be justified.

RESUMO Introdução: O acúmulo de placa bacteriana pode causar lesões de mancha branca. A adição de nanopartículas nas resinas ortodônticas pode ser eficaz para reduzir o número e a função dos microrganismos. Objetivo: O objetivo do presente estudo foi avaliar os efeitos antibacterianos contra o Streptococcus mutans, em diferentes intervalos de tempo, de resinas ortodônticas contendo diferentes tipos de nanopartículas. Métodos: Foram criados dez grupos experimentais e um grupo controle contendo nanopartículas de hidroxiapatita, óxido de titânio, óxido de zinco, óxido de cobre e óxido de prata em concentrações de 0,5% e 1%. Em seguida, foram preparados 26 discos de resina para cada grupo. Colônias de Streptococcus mutans foram cultivadas e contadas. Posteriormente, as culturas bacterianas foram colocadas em solução de ágar Mueller-Hinton. Os discos de resina foram colocados no meio de cultura e, depois da incubação, mediu-se o diâmetro de inibição do crescimento. Para avaliar os efeitos em longo prazo das nanopartículas, as colônias foram analisadas após 3, 15 e 30 dias. Resultados: Os resultados mostraram que o óxido de cobre a 1% e o óxido de prata a 1% reduziram significativamente o número de bactérias (p< 0,05), mas não houve diferença estatisticamente significativa entre os outros grupos e o grupo controle (p> 0,05). Após 3 dias, houve uma diferença significativa entre o grupo controle e os grupos óxido de prata a 0,5%, óxido de prata a 1% e óxido de cobre a 1% (p< 0,05). Porém, após 30 dias, as colônias haviam crescido em todos os grupos, sem diferença com o grupo controle (p> 0,05). Conclusão: A adição de óxido de cobre a 1% e óxido de prata a 1% apresenta efeitos antibacterianos apenas no curto prazo; portanto, o uso clínico dessas nanopartículas não se justifica.

Comparison of the efficacy of calcium versus acetaminophen on reduction of orthodontic pain.

Background: Pain and discomfort are common during orthodontic treatment. Aim: The aim of this single blind clinical trial was to compare the effectiveness of oral calcium versus acetaminophen in pain reduction. Materials and Methods: In this study, the patients recorded their pain on a 100-mm visual analogue scale (VAS). Forty female patients (14-19 years old) who had passed at least 2 months of their first orthodontic archwire placement and their pain intensity was 40-100 mm (VAS) were selected and randomly assigned to two groups. Psychotic status was measured using Hospital Anxiety and Depression Scale (HADS). In group 1 calcium forte tablets (500 mg) and in group 2 acetaminophen (325 mg) tablets were prescribed to be taken one tablet per day. After consumption of all tablets (n=60), pain intensity was measured and compared with that before drug therapy. Results: The results indicated that the difference in pain intensity before and after drug administration in the calcium group was statistically significant (P<0.001), but not significant in the acetaminophen group (P=0.468). The difference between the pain reduction in the two groups were also statistically significant (P<0.001). In the calcium group 9.5% and in the acetaminophen group 15.8% had anxiety that was not statistically significant (P=0.631). In both groups, no subject had depression. Conclusion: Calcium is more effective than acetaminophen in long-term pain reduction during orthodontic treatment.