ABSTRACT
ObjectiveTo compare and observe the effect of Reduning injection （mainly clearing heat）， Shenfu injection （mainly warming Yang） combined with gefitinib on the proliferation， apoptosis， stemness characteristics and metabolism of lung cancer cells. MethodDifferent non-small cell lung cancer （NSCLC） cell lines were selected and intervened with gefitinib （5， 10， 20 μmol·L-1）， Reduning injection （0.6%， 0.9%）， Shenfu injection （0.6%， 0.9%）， gefitinib combined with Reduning injection， and gefitinib combined with Shenfu injection. Cell proliferation in each group was detected by cell counting kit-8 （CCK-8） assay， and cell apoptosis was detected by flow cytometry. The mRNA and protein expressions of lung cancer stem cell markers sex determining region Y-box 2 （Sox2） and aldehyde dehydrogenase family 1 member A1 （ALDH1A1） were determind by real-time quantitative polymerase chain reaction （Real-time PCR） and Western blot， respectively. The redox ratio of lung cancer cells was observed by femtosecond label-free imaging （FLI） and energy metabolism instrument was used to determine the glycolysis level in cells. ResultCompared with the blank group， Reduning injection reduced the survival rate of lung cancer cells （P<0.05）， increased the apoptosis rate （P<0.05）， down-regulated the mRNA and protein expressions of Sox2 and ALDH1A1 （P<0.05）， and up-regulated the redox ratio of cells （P<0.05）， while Shenfu injection exerted no remarkable effect on the above indexes. In addition， compared with gefitinib alone， Reduning injection combined with gefitinib inhibited the survival rate of lung cancer cells （P<0.05）， promoted the cell apoptosis （P<0.05）， down-regulated the mRNA and protein expressions of Sox2 and ALDH1A1 （P<0.05）， up-regulated the redox ratio of cells （P<0.05）， and lowered the proton efflux rate of glycolysis （P<0.05）， while Shenfu injection combined with gefitinib failed to affect these indexes of lung cancer cells significantly. ConclusionReduning injection may inhibit stemness characteristics of tumor cells by regulating their metabolism to enhance the proliferation-inhibiting and pro-apoptotic effects of gefitinib on lung cancer cells， while Shenfu injection had no significant enhancing effect on gefitinib. This indicates that epidermal growth factor receptor tyrosine kinase inhibitors （EGFR-TKIs） should be used in combination with heat-clearing Chinese medicines.
ABSTRACT
Objective:To investigate the etiological spectrum, clinical features, and surgical treatment of patients with Cushing's syndrome (CS) who underwent adrenal surgery.Methods:From August 2002 to August 2022, the clinical data of 985 patients with Cushing's syndrome who underwent surgical treatment in the department of urology, Peking Union Medical College Hospital were retrospectively analyzed. There were 210 males and 775 females. The average age was 43.33±13.49 years old. The age of males was older than that of females (45.53±14.39 vs. 42.68±13.16 years, P=0.016). The principle of preoperative surgical method selection for patients in this group was described as follow. For adrenocorticotropin (ACTH) independent CS, adrenal tumor resection was considered for unilateral solitary lesions and unilateral adrenalectomy was considered for unilateral multiple lesions. For bilateral lesions, the larger tumor was removed first, and the contralateral operation was decided according to the follow-up results. Patients with suspicion of cortical cancer are subjected to R0 resection, and open surgery was performed if the tumor diameter is≥6 cm. The clinical characteristics of CS patients were summarized. The clinical symptom characters, etiology spectrum and the corresponding selection principles of surgical methods were analyzed. Results:Among the 985 cases, ACTH-independent CS accounted for 92.8% (914/985), and ACTH-dependent CS accounted for 7.2% (71/985). According to the postoperative pathological results, ACTH-independent CS was the most common, among which adrenal adenoma was the most common 75.94% (748/985), PBMAH 11.37% (112/985), Cushing's disease 4.26% (42/985), PPNAD 3.25% (32/985), EAS 2.94 (29/985), cortical carcinoma 2.23% (22/985). In terms of clinical manifestations, full moon face, bloody face, buffalo back, central obesity and weight gain were more common. The incidence of the above single symptoms was >30%. In terms of hormone secretion, the cortisol level of ACTH-dependent CS patients was significantly higher than that of ACTH-independent CS ( P<0.001). Cortisol [(16.61±6.78) μg/dl] and 24h-UFC [103.65 (59.83, 175.70) μg/24h] in patients with subclinical cortical adenoma were lower than those in other types of patients ( P<0.001). Among the patients with bilateral adenomas, 4 patients underwent simultaneous resection of bilateral adrenal tumors due to severe CS symptoms, and the remaining 74 patients underwent two-stage simple tumor resection, total adrenalectomy or subtotal adrenalectomy according to the size and number of tumors. Of the 22 patients with cortical carcinoma, 2 patients underwent R0 resection after neoadjuvant therapy with mitotane after being diagnosed by needle biopsy due to local infiltration of the tumor. In patients with EAS and Cushing's disease, 62.07% (18/29) and 23.81% (10/42) were treated with simultaneous bilateral target gland resection due to severe CS symptoms, respectively. In 112 cases of PBMAH and 32 cases of PPNAD, the initial treatment was unilateral adrenalectomy or subtotal adrenalectomy, and the follow-up was continued to decide whether to perform contralateral adrenalectomy or subtotal adrenalectomy. Conclusions:The etiological spectrum of CS patients admitted to the urology department is different from that of the overall CS, and is dominated by adrenal disease, and Cushing's disease is rare. Due to the different etiological spectrum, the patient's symptom spectrum is different, and difficulty in squatting and fracture are rare. The main treatment for unilateral adrenal disease is tumor resection or unilateral adrenalectomy. For ACTH-dependent CS in bilateral lesions, bilateral adrenalectomy is recommended, and hormone supplementation is recommended after surgery. For ACTH-independent CS, unilateral adrenalectomy is recommended first, and individualized treatment plans are formulated based on the results of follow-up.
ABSTRACT
Combined with the clinical use condition of MR in use in Shanghai Sixth People's Hospital, MR components are divided into scanning type I and scanning type II. At the same time, combined with the main loss force of MR components, the research divides MR components into dynamic components and electric thermal components. In this study, a complete set of MR system reliability indexes and implementation methods are given, including system reliability index determination, system reliability allocation, component reliability index realization, system reliability prediction and system reliability verification. At the same time, this study also gives the methods of reliability prediction and reliability verification, and gives the MTBF calculation method of MR system based on clinical use data statistics.
Subject(s)
Humans , China , Magnetic Resonance Imaging , Magnetic Resonance Spectroscopy , Reproducibility of ResultsABSTRACT
Based on the clinical application data of medical X-ray computed tomography (CT) in the Shanghai Sixth People's Hospital, this study transformed it into the product reliability index requirements, and took the mechanical representative component-examination table (hereinafter referred to as "patient table") and the electronic representative component-DCB (data control board) as examples. Based on the relationship between failure characteristics and clinical application data, a complete set of closed-loop implementation methods from reliability index requirements to reliability design and verification are discussed.
Subject(s)
Humans , China , Reproducibility of Results , Tomography, X-Ray ComputedABSTRACT
Objective:To evaluate the precision of digital impressions taken under simulated clinical impression taking conditions with TRIOS and to compare with the precision of extraoral digitalizations . Methods:Six #14 -#17 epoxy resin dentitions with extracted #16 tooth preparations embedded were made.For each artificial dentition , ( 1 ) a silicone rubber impression was taken with individual tray , poured with type IV plaster ,and digitalized with 3Shape D700 model scanner for 10 times;(2) fastened to a dental simulator , 10 digital impressions for each were taken with 3Shape TRIOS intraoral scanner .To assess the precision , best-fit algorithm and 3 D comparison were conducted between repeated scan models pairwise by Geomagic Qualify 12.0, exported as averaged errors (AE) and color-coded diagrams.Non-parametric analysis was performed to compare the precisions of digital impressions and model images .The color-coded diagrams were used to show the deviations distributions .Results:The mean of AE for digital impressions was 7.058 281 μm, which was greater than that of 4.092 363 μm for the model images (P<0.05).However, the means and medians of AE for digital impressions were no more than 10 μm, which meant that the consistency between the digital impressions was good .The deviations distribution was uniform in the model images ,while nonuniform in the digital impressions with greater deviations lay mainly around the shoulders and interproximal surfaces .Conclusion:Digital impressions with TRIOS are of good precision and up to the clinical standard .Shoulders and interproximal surfaces scanning are more difficult.
ABSTRACT
Objective:To investigate the fatigue damage mechanism of porcelain,and its relation with the microscopic defects in clinically failed all-ceramic crowns.Methods: Collecting the bilayered all-ceramic crowns failed in vivo.The fractured surfaces and occlusial surfaces of failed crowns were examined by an optical microscope followed by detailed fractography investigations using a field emission scanning electron microscope.When chemical impurities were of concern,energy-dispersive X-ray spectroscopy analysis was performed to examine chemical composition.A standard practice for fractography failure analysis of advanced ceramics is applied to disclose the fracture mode,and damage character.Results: Three types of fracture features are defined as breakdown of the entire crown,and porcelain chipping-off/delamination.Alumina crowns were usually characterized by breakdown of the entire crown,while zirconia crowns by porcelain chipping-off and delamination.The fatigue damage of porcelain was classified into surface wear,cone crack,and porcelain delamination.The observed microscopic defects in this study included air bubbles and impurity particles.Conclusion: The multi-point occlusial contacts were recommended in all-ceramic restorations clinically.The thickness of porcelain is important for the anti-fatigue ability of porcelain.Cautions have to be taken to avoid contaminations during the veneering processes.
ABSTRACT
Objective: To evaluate the effect of core∶dentin thickness ratio on the flexure strength, fracture mode and origin of bilayered IPS Empress Ⅱceramic composite specimens. Methods: IPS EmpressⅡ core ceramic, dentin porcelain and bilayered composite specimens with core∶dentin thickness ratio of 2∶1 and 1∶1 were tested in three-point flexure strength. Mean strengths and standard deviations were determined. The optical microscopy was employed for identification of the fracture mode and origin. Results: The flexure strength of dentin porcelain was the smallest (62.7 MPa), and the strength of bilayered composite specimens was smaller than single-layered core ceramic(190.2 MPa). The core∶dentin ratio did not influence the strength of bilayered composite specimens. The frequency of occurrence of bilayered specimen delaminations was higher in the group of core∶dentin thickness ratio of 1∶1 than in the group of 2∶1. Conclusion: IPS Empress Ⅱcore ceramic was significantly stronger than veneering dentin porcelain. Core∶dentin thickness ratio could significantly influence the fracture mode and origin, and bilayered IPS Empress Ⅱceramic composite specimens showed little influence in the fracture strength.