Non/hypo-response to hepatitis B vaccination and influencing factors in HIV-infected patients in the context of different immunization schedules / 中华流行病学杂志

Objective: To study the non/hypo-response to hepatitis B vaccination in HIV-infected patients, identify the influencing factors and provide evidence for the development of hepatitis B prevention and control strategies and measures for special population. Methods: On the basis of the randomized controlled trial of 20 µg hepatitis B vaccine immunization at 0-1-6 month, 0-1-2-6 month and 60 µg hepatitis B vaccine immunization at 0-1-2-6 month, the HIV-infected patients who completed one-month follow-up after the full course vaccination were selected as study subjects. Quantification of antibody to hepatitis B surface antigen (anti-HBs) in serum samples was performed by using chemiluminescent microparticle immunoassay (CMIA) and demographic characteristics, disease history, HIV infection and treatment status of the study subjects were collected. Statistical analysis was conducted by χ2 test, t test, unconditional logistic regression and interaction analyses. Results: The non/hypo-response rates to hepatitis B vaccination were 34.65% (35/101), 24.49% (24/98) and 10.99% (10/91) in 20 µg group at 0-1-6 month or 0-1-2-6 month and 60 µg group at 0-1-2-6 month (P<0.001), respectively. Logistic regression analysis showed that after controlling for confounding factors, the risk for non/hypo-response was 0.22 times higher in HIV-infected patients receiving 60 µg hepatitis B vaccine at 0-1-2-6 month than in patients receiving 20 µg hepatitis B vaccine at 0-1-6 month (95%CI: 0.10-0.50), the risk for non/hypo-response was higher in men than in women (OR=3.65, 95%CI: 1.88-7.07), and the risk for non/hypo-response was 2.64 times higher in those without hepatitis B vaccination history than in those with hepatitis B vaccination history (95%CI: 1.10-6.32). Moreover, there were multiplicative interactions between immunization schedule and gender (OR=2.49, 95%CI: 1.24-5.00). Conclusion: The non/hypo-response rate to hepatitis B vaccination was significantly lower in HIV-infected patients receiving 60 µg hepatitis B vaccine at 0-1-2-6 month than in those receiving 20 µg hepatitis B vaccine at 0-1-6 month and 0-1-2-6 month. Gender, vaccination schedule and history of hepatitis B vaccination were the influencing factors of the non/hypo-response to hepatitis B vaccination. There was a multiplicative interaction between vaccination schedule and gender, and men receiving 20 µg hepatitis B vaccines had a higher risk for non/hypo-response to hepatitis B vaccination.

HIV infection status and related factors in men who have sex with men in sentinel surveillance in Shanxi province, 2010, 2015 and 2020 / 中华流行病学杂志

Objective: To understand the infection status of HIV and related factors in men who have sex with men (MSM) in Shanxi province in 2010, 2015 and 2020. Methods: According to the sentinel surveillance protocol, continuous cross-sectional survey were conducted to collect the information about basic characteristics, general demographic characteristics, AIDS knowledge awareness, high-risk sexual behavior, sexually transmitted diseases, intervention services and HIV infection rate of the MSM in Shanxi in 2010, 2015 and 2020. Results: In 2010, 2015 and 2020, a total of 2 708 MSM were included in this study. There were significant differences in HIV infection rate among three years (χ2=23.76, P<0.001) with an increasing trend with year (trend χ2 =17.34, P<0.001). The rates of anal sex, commercial sex and heterosexual behavior in the past 6 months were 77.62% (2 102/2 708), 5.91% (160/2 708) and 28.14% (762/2 708) respectively, and the rates of consistent use of condom were 52.52% (1 104/2 102), 63.13% (101/160) and 23.49%(179/762) respectively, and the rate of consistent condom use was low. Results from multivariate logistic regression analysis showed that different cities, having educational level of junior high school or below, being recruited through internet, voluntary counseling and testing, suffering from sexually transmitted diseases, occasional condom use in anal sex in the past 6 months were the correlative factors of HIV infection of MSM. Conclusions: The HIV infection rate of MSM in Shanxi increased year by year from 2010, 2015 to 2020. The HIV/AIDS-related risk behavior persisted, and the proportion of condomuse adherence was low, and the HIV detection rate was low in the MSM, so targeted and effective measures should be taken to promote the condom use adherence and regular HIV testing in MSM.

Mechanism of cornus officinalis polysaccharide on proliferation and apoptosis of gastric cancer cells / 中国药理学通报

Aim To investigate the effect of nifedipine on the formation of autophagosomes in hepatoma cell line Huh-7 and its mechanism.Methods Different concentrations of nifedipine were used to interfere with the proliferation of Huh-7 cells in vitro.The effect of nifedipine on the proliferation of Huh-7 cells was detected by cell proliferation experiment and colony formation experiment.The expressions of Beclin1 and LC3B-Ⅱ were detected by Western blot.The effect of nifedipine on the formation of autophagosomes in Huh-7 cells was observed by laser scanning confocal microscopy.Results Nifedipine significantly inhibited the proliferation of Huh-7 cells in a time-and concentration-dependent manner.The IC50 of nifedipine on day 2 was 22.7 mg·L-1.Nifedipine at the concentration of 25 mg·L-1 significantly reduced the colony formation rate of Huh-7 cells compared with the control group, and the inhibition rate of colony formation was(95.46±0.45)%.Western blot analysis showed that nifedipine significantly up-regulated the protein expression levels of Beclin1 and LC3B-Ⅱ.The amount of autophagosomes in nifedipine group cells were more than that of control group, which was observed by laser scanning confocal microscopy.Conclusions Nifedipine significantly inhibits the proliferation of Huh-7 cells and promotes the formation of autophagosomes, which may be related to the up-regulation of Beclin1 protein expression by nifedipine.

Two New Species in the Family Cunninghamellaceae from China

The species within the family Cunninghamellaceae are widely distributed and produce important metabolites. Morphological studies along with a molecular phylogeny based on the internal transcribed spacer (ITS) and large subunit (LSU) of ribosomal DNA revealed two new species in this family from soils in China, that is, Absidia ovalispora sp. nov. andCunninghamella globospora sp. nov. The former is phylogenetically closely related to Absidia koreana, but morphologically differs in sporangiospores, sporangia, sporangiophores, columellae, collars, and rhizoids. The latter is phylogenetically closely related to Cunninghamella intermedia, but morphologically differs in sporangiola and colonies. They were described and illustrated.

Two New Species in the Family Cunninghamellaceae from China

The species within the family Cunninghamellaceae are widely distributed and produce important metabolites. Morphological studies along with a molecular phylogeny based on the internal transcribed spacer (ITS) and large subunit (LSU) of ribosomal DNA revealed two new species in this family from soils in China, that is, Absidia ovalispora sp. nov. andCunninghamella globospora sp. nov. The former is phylogenetically closely related to Absidia koreana, but morphologically differs in sporangiospores, sporangia, sporangiophores, columellae, collars, and rhizoids. The latter is phylogenetically closely related to Cunninghamella intermedia, but morphologically differs in sporangiola and colonies. They were described and illustrated.

Finite element analysis of optimization on placement of medial fixed-bearing unicompartmental knee arthroplasty / 中华骨科杂志

Objective@#To investigate the influence of displacement of femoral and tibial components on the biomechanics of femoral or tibial bone in coronal view.@*Methods@#A series of CT and MRI of the left knee joint of a Han male volunteer was taken and a three-dimensional finite element model of the healthy knee joint was established. The femoral component and the tibial component were designed with varus 6°, varus 3°, 0°, valgus 3°, and valgus 6°, and were combined into 25 three-dimensional finite element model (FEM) of medial unicompartmental knee arthroplasty. A 1 000 N load was applied along the femoral mechanical axis. The von Mises cloud stress distribution was observed. Moreover, the lateral compartment load ratio, the high contact stress of cancellous bone and medial cortical bone below the tibial component, the upper surface of the polyethylene liner, and the femoral cartilage in the lateral compartment was measured. The statistically significant indicators compared with the neutral position (0° varus or valgus of the tibia and the femoral prosthesis, and 5° posterior slope of tibia prosthesis) were identified by scatter plots to find the dense and sparse areas of point items. The optimal position of the femoral component and the tibial component was determined by the number of items with statistical significance in the sparse area.@*Results@#When the femoral component was placed at 0° position, there was no significant difference in the high contact stress of cancellous bone below the tibial component in the five groups. When the femoral component was placed at 0° position, the tibial component was 6° varus or 6° valgus and the stress was increased by 9.21±3.38 MPa and 9.08±4.13 MPa (P<0.05), respectively. With the changes of femoral and tibial components from 6° varus to 6° valgus, the high contact stress of the medial cortical bone below the tibia was gradually decreased (P<0.05). When the femoral component was placed at 0°, the tibial component changes from 6° varus to 6° valgus without significant difference in the high contact stress on the upper surface of each group of polyethylene gasket. Compared with the neutral position group, the high contact stress of the 6° varus or 6° valgus group were increased by 2.88±2.53 MPa and 3.47±2.86 MPa, respective ly (P<0.05). The lateral compartment load ratio and the high contact stress of lateral compartment femoral cartilage was gradually decreased (P<0.05), when the femoral and tibial components changed from 6° varus to 6° valgus. The number (2.8%, 1/36) of indicators in the sparse area (the combination of all combinations of femur or tibia from 3° varus to 3° valgus) was less than that (57.8%, 37/64) in the dense area (set of all combinations except sparse area), and the difference was significant (χ2=29.61, P<0.001).@*Conclusion@#It is suggested that the position of the femoral component and the tibial component in fixed medial unicompartmental arthroplasty should not exceed 3° varus or valgus in patients with standard lower limb alignment.

Finite element analysis of optimization on placement of medial fixed-bearing unicompartmental knee arthroplasty / 中华骨科杂志

Objective To investigate the influence of displacement of femoral and tibial components on the biomechanics of femoral or tibial bone in coronal view.Methods A series of CT and MRI of the left knee joint of a Han male volunteer was taken and a three-dimensional finite element model of the healthy knee joint was established.The femoral component and the tibial component were designed with varus 6°,varus 3°,0°,valgus 3°,and valgus 6°,and were combined into 25 three-dimensional finite element model (FEM) of medial unicompartmental knee arthroplasty.A 1 000 N load was applied along the femoral mechanical axis.The von Mises cloud stress distribution was observed.Moreover,the lateral compartment load ratio,the high contact stress of cancellous bone and medial cortical bone below the tibial component,the upper surface of the polyethylene liner,and the femoral cartilage in the lateral compartment was measured.The statistically significant indicators compared with the neutral position (0° varus or valgus of the tibia and the femoral prosthesis,and 5° posterior slope of tibia prosthesis) were identified by scatter plots to find the dense and sparse areas of point items.The optimal position of the femoral component and the tibial component was determined by the number of items with statistical significance in the sparse area.Results When the femoral component was placed at 0° position,there was no significant difference in the high contact stress of cancellous bone below the tibial component in the five groups.When the femoral component was placed at 0° position,the tibial component was 6° varus or 6° valgus and the stress was increased by 9.21±3.38 MPa and 9.08±4.13 MPa (P＜0.05),respectively.With the changes of femoral and tibial components from 6° varus to 6° valgus,the high contact stress of the medial cortical bone below the tibia was gradually decreased (P＜ 0.05).When the femoral component was placed at 0°,the tibial component changes from 6° varus to 6° valgus without significant difference in the high contact stress on the upper surface of each group of polyethylene gasket.Compared with the neutral position group,the high contact stress of the 6° varus or 6° valgus group were increased by 2.88±2.53 MPa and 3.47±2.86 MPa,respectively (P＜0.05).The lateral compartment load ratio and the high contact stress of lateral compartment femoral cartilage was gradually decreased (P＜0.05),when the femoral and tibial components changed from 6° varus to 6° valgus.The number (2.8％,1/36) of indicators in the sparse area (the combination of all combinations of femur or tibia from 3° varus to 3° valgus) was less than that (57.8％,37/64) in the dense area (set of all combinations except sparse area),and the difference was significant (x2=29.61,P＜ 0.001).Conclusion It is suggested that the position of the femoral component and the tibial component in fixed medial unicom partmental arthroplasty should not exceed 3° varus or valgus in patients with standard lower limb alignment.

Experimental study on improvement of blood supply timeliness of rabbits with vertebral artery type of cervical spondylosis by massage / 中国骨伤

<p><b>OBJECTIVE</b>Establishing a rabbit model of vertebral artery type of cervical spondylosis(CSA) and to observe the characteristics of timeliness in improving the blood flow of vertebral artery by massage, and discusse the material basis of this timeliness based on NPY and ET-1.</p><p><b>METHODS</b>Fifty New Zealand healthy and white rabbits, 6-month-old, the body mass of (2.0±0.5) kg, with half males and half females, were randomly divided into blank group, model group, three massage groups(including massage for 10 min, 20 min, and 30 min group by random number table), 10 rabbits in each group. In addition to the blank group, CSA rabbit model was made by injection of sclerosing agent in other groups. The rabbits of massage for 10 min, 20 min, and 30 min groups received the massage therapy of corresponding duration, one times a day, continuous 10 days. The blood flow of vertebral artery in each group was detected by PeriFlux5000 laser doppler, and the contents of NPY and ET-1 in serum were detected by ELISA before and after treatment.</p><p><b>RESULTS</b>Changes in blood flow of vertebral artery before and after treatment:there was no significant difference between model group and massage for 10 min group;there was significant difference between model group and massage for 20, 30 min groups(<0.01); there was significant difference between massage for 10 min group and massage for 20, 30 min groups(<0.01); there was no significant difference between massage for 20 min group and massage for 30 min group. Changes of NPY content before and after treatment: there was significant difference between model group and massage for 10 min group(<0.05); there was significant difference between model group and massage for 20, 30 min groups(<0.01); there was significant difference between massage for 10 min group and massage for 20, 30 min groups(<0.01); there was no significant difference between massage for 20 min group and massage for 30 min group. Changes of ET-1 content before and after treatment:there was no significant difference between model group and massage for 10 min group;there was significant difference between model group and massage for 20, 30 min groups(<0.01); there was significant difference between massage for 10 min group and massage for 20 min, 30 groups (<0.01); there was no significant difference between massage for 20 min group and massage for 30 min group.</p><p><b>CONCLUSIONS</b>Massage needed 20 min for rabbits with CSA can only significantly improve the blood flow of vertebral artery. However, prolonging the time of massage has no obvious effect. The material basis of this timeliness characteristic of massage is closely related to the change of NPY and ET-1 levels in serum.</p>

Gait analysis at the early stage after direct anterior approach in total hip arthroplasty / 北京大学学报(医学版)

Objective:To evaluate the result of operation and gait analysis at the early stage after direct anterior approach (DAA) in total hip arthroplasty (THA).Methods: In this study,20 patients who suffered from necrosis of femoral head or developmental dysplasia of the hip were scheduled to undergo THA.The basic information and visual analogue scale (VAS) score,Harris score before and after surgery were recorded.All of the patients finished the gait analysis before the surgery and 6 weeks and 12 weeks after the surgery,the data were compared with those of normal adult people.Results: Their hospital stay after the operation was 3.3 d,the VAS score after the operation was no more than 4 points,the positions of prosthesis were satisfactory,and there was no dislocation.The gait analysis results contained step speed,stride,the range of motion (ROM) of hip and knee.The step speed before the surgery (preoperation,Pre) was 0.64 m/s,6 weeks after the surgery (6W) was 0.77 m/s,12 weeks after the surgery (12W) was 1.07 m/s,and the control group was 1.19 m/s.The stride at Pre,6W,12W,and control group were 43.15 steps/min,51.42 steps/min,55.52 steps/min,and 57.15 steps/min,respectively.The ROM of hip joint at Pre,6W,12W,and control group were 31.00°,39.62°,40.40°,and 45.67°,respectively.The ROM of knee joint at Pre,6W,12W,and control group were 50.52°,59.28°,67.29°,and 70.42°,respectively.The results of the gait analysis showed that the gait recovery after the direct anterior total hip arthroplasty was very fast and at the 12th week after surgery the gait of the patients was close to the normal adult people.Conclusion: The direct anterior approach is one of the choosable approach of the THA,and this kind of surgery has a better recovery of gait after the operation,and at the end of 12 weeks after the surgery the gait is very close to the normal adult people.But we also need more studies to prove this conclusion.

Biomechanical research on effects of joint line height on stress of medial and lateral compartment after unicompartmental knee arthroplasty / 中华骨科杂志

Objective To investigate biomechanical effects of different joint line height on unicompartmental knee arthroplasty (UKA) and to provide biomechanical evidence for surgical decision during UKA using finite element analysis (FEA).Methods On the basis of knee joint CT data from a healthy volunteer (male,30 years old,165 cm and 60 kg) and UKA prosthesis 3D scanned data,the 3D models of normal knee and UKA were constructed.Subject-specific finite element models with inhomogeneous material property assignment were constructed for normal knee and UKA with 3 different height of joint line (-3 mm,0 mm and +3 mm).Starting from the tibial articular surface,5 sections were extracted with 2 mm interval.30 nodes were selected in medial and lateral area,respectively on each section.The mean stress value of nodes was defined as the stress level of subchondral bone.Results Mean values of stress on polyethylene upper surface of 0,-3 and+3 mm joint line position were 14.84,26.81and 20.86 MPa,and the difference was statistical significant (t0vs-3=4.896,P0vs-3=0.000;t0vs+3=3.455,P0v+3=0.008;t-3vs+3=2.579,P-3vs+3=0.020).Mean values of stress on tibial prosthesis upper surface of 0,-3 and +3 mm joint line position were 29.69,50.49 and 39.99MPa,respectively,and the difference was statistical significant(t0vs-3=5.675,P0vs-3=0.000;t0vs+3=4.755,P0v+3=0.001;t-3vs+3=4.783,P-3vs+3=0.000).When joint line was in 0 mm height,stress level of subchondral bone was similar to that of normal knee.When joint line was in-3 mm height,significantly increased stress was found on polyethylene (increased 81％) and tibial component (increased 70％) surface compared with that of 0 mm height,while stress on trabecular bone under lateral tibial articular surface also increased by 8.7％.When joint line was in +3 mm height,increased stress on polyethylene (increased 41％) and tibial component (increased by 35％) surface were less than that of-3 mm height.Stress on trabecular bone under lateral articular surface decreased by 55.6％ compared with 0 mm height.Conclusion During UKA,ensuring a normal height of joint line is benefit to keep the stress path of the medial and lateral tibia similar with normal knee and decrease the risk of premature polyethylene wear,tibial component subsidence and periprosthetic fracture.

Comparison of earlier functional recovery in total hip arthroplasty patients using a direct anterior approach or posterolateral approach / 中华骨科杂志

Objective To compare faster rehabilitation of different surgical approaches in total hip arthroplasty (THA)patients using a direct anterior approach or posterolateral approach.Methods Sixty-eight patients (35 in direct anterior THA and 33 in posterolateral THA) from September 2015 to March 2016 were recruited in the present study.The incision length,operation duration,intraoperative blood loss,serum creatinekinase (CK),C-reactive protein (CRP),erythrocyte sedimentation rate (ESR),interleukin-6 (IL-6) and visual analogue scale (VAS) pain score were compared between two groups respectively.The Harris hip score,the University of California at Los Angeles (UCLA) pain,walking,and activity scores,postoperative hospital length of stays,gait analysis,component placement and complications were also compared.Results The mean incision length,operation duration,intraoperative blood loss were 11.23±0.97 cm,73.77±9.20 min and 157.15±35.83 ml in the DAA group respectively,while those in PLA group were 15.16±1.12 cm,64.12±13.31 min and 126.97±45.45 ml.The mean incision length of the DAA group were significantly less than that of the PLA group.The DAA group underwent longer operation time that associated with more intraoperative blood loss.The levels of CK and inflammation markers were increased in the PLA group compared with those in the DAA group.The VAS pain score was less in the DAA group than the PLA group within postoperative 72 hours.Functional recovery in the DAA group was faster than that in the PLA group based on the Harris hip score,UCLA scores,and gait analysis up to 3 months.There was no difference in these outcomes between the groups beyond 6 months.The average postoperative hospital length of stay was 2.95±0.24 days and 3.35±0.51 days for the DAA group and PLA group respectively.The patients in DAA group required less postoperative hospital length of stays.The angle of acetabular cup anteversion in the DAA group (16.4°±2.3°) was lesser than that in the PLA group (20.4°±2.8°).There was one intraoperative nondisplaced greater trochanter fracture in the DAA group,whereas no intraoperative complications were occurred in the PLA group.Conclusion The present study showed that using direct anterior approach in THA provided significant benefits for patients in terms of muscle damage,VAS score,hospital length of stays and functional recovery in the early stage postoperatively compared to using posterolateral approach.

Comparison of earlier functional recovery in total hip arthroplasty patients using a direct anterior approach or posterolateral approach / 中华骨科杂志

Objective To compare faster rehabilitation of different surgical approaches in total hip arthroplasty (THA)patients using a direct anterior approach or posterolateral approach.Methods Sixty-eight patients (35 in direct anterior THA and 33 in posterolateral THA) from September 2015 to March 2016 were recruited in the present study.The incision length,operation duration,intraoperative blood loss,serum creatinekinase (CK),C-reactive protein (CRP),erythrocyte sedimentation rate (ESR),interleukin-6 (IL-6) and visual analogue scale (VAS) pain score were compared between two groups respectively.The Harris hip score,the University of California at Los Angeles (UCLA) pain,walking,and activity scores,postoperative hospital length of stays,gait analysis,component placement and complications were also compared.Results The mean incision length,operation duration,intraoperative blood loss were 11.23±0.97 cm,73.77±9.20 min and 157.15±35.83 ml in the DAA group respectively,while those in PLA group were 15.16±1.12 cm,64.12±13.31 min and 126.97±45.45 ml.The mean incision length of the DAA group were significantly less than that of the PLA group.The DAA group underwent longer operation time that associated with more intraoperative blood loss.The levels of CK and inflammation markers were increased in the PLA group compared with those in the DAA group.The VAS pain score was less in the DAA group than the PLA group within postoperative 72 hours.Functional recovery in the DAA group was faster than that in the PLA group based on the Harris hip score,UCLA scores,and gait analysis up to 3 months.There was no difference in these outcomes between the groups beyond 6 months.The average postoperative hospital length of stay was 2.95±0.24 days and 3.35±0.51 days for the DAA group and PLA group respectively.The patients in DAA group required less postoperative hospital length of stays.The angle of acetabular cup anteversion in the DAA group (16.4°±2.3°) was lesser than that in the PLA group (20.4°±2.8°).There was one intraoperative nondisplaced greater trochanter fracture in the DAA group,whereas no intraoperative complications were occurred in the PLA group.Conclusion The present study showed that using direct anterior approach in THA provided significant benefits for patients in terms of muscle damage,VAS score,hospital length of stays and functional recovery in the early stage postoperatively compared to using posterolateral approach.

Deficiencies and developing requirements of monitoring technology for chemical defense summarizing from “Tianjin Port 8·12 Explosion Accident”: A discussion / 国际药学研究杂志

“Tianjin Port 8·12 Catastrophic Explosion Accident” is making us alert. And how to learn lessons from the accident, how to form effective prevention and control strategies, which make us much ponder over. Based on summarizing the experiences of the previous chemical emergencies, from the aspects of monitoring and early warning, disaster assessment, on-site detection, and remote telemetry, this paper expounds the importance of the related mechanism and the hardware construction. Then the serious “bottleneck” in the construction of Chinese chemical defense was pointed out as well as introducing the new development direction of foreign military monitoring and detecting equipments. Our aim is attracting much attention of peers within the discipline, so as to effectively enhance the abilities of monitoring and early warning and emergency handling for chemical defense in China.

Analysis of the Basic Stress Pathway Above Acetabular Dome / 生物医学工程学杂志

The basic stress pathway above the acetabular dome is important for the maintenance of implant stability in acetabular reconstruction of total hip arthroplasty (THA). The purpose of this study was to describe the basic stress pathway to provide evidence for clinical acetabular reconstruction guidance of THA. A subject-specific finite element (FE) model was developed from CT data to generate 3 normal hip models and a convergence study was conducted to determine the number of pelvic trabecular bone material properties using 5 material assignment plans. In addition, in the range of 0 to 20 mm above the acetabular dome, the models were sectioned and the stress pathway was defined as two parts, i.e., 3D, trabecular bone stress distribution and quantified cortical bone stress level. The results showed that using 100 materials to define the material property of pelvic trabecular bone could assure both the accuracy and efficiency of the FE model. Under the same body weight condition, the 3D trabecular bone stress distributions above the acetabular dome were consistent, and especially the quantified cortical bone stress levels were all above 20 MPa and showed no statistically significant difference (P>0.05). Therefore, defining the basic stress pathway above the acetabular dome under certain body weight condition contributes to design accurate preoperative plan for acetabular reconstruction, thus helping restore the normal hip biomechanics and preserve the stability of the implants.

Discussion on the construction of monitoring technology platform for chemical defence and equipment requirements / 国际药学研究杂志

Chemical threat is a serious public safety problem we must be facing. And how to effectively deal with it is a priority. Based on the needs of chemical defence in our country, "hierarchical monitoring" technology platform is proposed. From three aspects of monitoring and early warning, on-site detecting and laboratory confirmation, and the international development needs and trends, the comparation of domestic and foreign equipment construction and development suggestions in our country are discussed and reviewed. Our aim is to establish effective monitoring mechanism for chemical defence, so as to nip the chemical threat in the bud or reduce the chemical hazards to the minimum.

Periacetabular stress distributions during normal gait cycle and its guiding function in acetabular reconstruction of THA / 医用生物力学

Objective To study the basic regular patterns of stress distributions inside and outside periacetabular districts during normal gait cycle of healthy adults, so as to provide clinical guidance for acetabular reconstruction of total hip arthroplasty (THA). Methods Based on CT scans of a male and a female healthy adult volunteer, The three-dimensional model including pelvis and proximal femur was reconstructed. By using an inhomogeneous material distribution scheme which was based on CT data to calculate elastic modulus and convergence analysis, each element was given a corresponding material attribute. The dynamic change of hip contact force during a normal gait cycle was used as the load condition to the model. Von Mises stress of the nodes inside and outside the model was considered as the criterion to assess the results. Results During normal gait, the stress on the hip surface of two volunteers was mainly transmitted from postersuperior part of acetabulum to auricular surface along posterolateral of iliac wing, and the maximum stress was at the district near greater sciatic. As for the superior, middle and inferior section of two volunteers' acetabulum, the stress was distributed both on cortical and cancellous bone of postersuperior part. However, in terms of acetabular anterior and posterior column, the stress distribution was mainly found on cortical bone. Conclusions According to the observed acetabular stress distribution pattern of health adults during normal gait cycle, choosing acetabular component with more suitable size and controlling the placement of acetabular component with more accuracy could obtain some acetabular reconstruction plan better in accordance with stress distributions during normal gait.

Influence from acetabular component orientation on stress distributions of periacetabulum / 医用生物力学

Abstract： Objective To study the influence from different placement angles of acetabular component on inner and outer stress distributions of periacetabulum in acetabular reconstruction of total hip arthroplasty (THA), so as to explore proper orientation for improving stability of acetabular component after THA. Methods Based on model with inhomogeneous material property assignment, nine THA models with acetabular component at different anteversion angles(15°, 20°, 25°) and abduction angles(40°, 45°, 50°) as well as one normal hip model were constructed. The maximal hip contact force in phase of single leg stance during normal gait cycle was chosen as the loading condition. In addition, according to the qualitative and quantitative principle, inner and outer stress distributions on 9 THA models were analyzed and compared with the normal hip model as control. Results When abduction angle of acetabular component was the nearest to anatomic angle (19° anteversion, 46° abduction) of acetabulum, the phenomenon of stress shielding on periacetabulum was the most obvious. When abduction angle of acetabular component was placed at 45° and anteversion angle changed from 15° to 25°, no significant influence was exerted on the whole stress distributions of THA models. Meanwhile, when anteversion angle of acetabular component was 15°, the THA model had good stability in stress distributions, and the phenomenon of stress shielding on cortical and cancellous bone was obviously improved. Conclusions For patients who have normal anatomic acetabulum and need to be treated with THA, the abduction angle of acetabular component should be placed at 45°, as that of normal acetabulum; the anteversion angle should be 5° smaller than that of normal acetabulum and between 15° and 20°.

Influence of ZSM-5(38)/Al-MCM-41 composite molecular sieve catalysts on pyrolysis of cellulose / 生物工程学报

Pyrolysis of cellulose with different catalysts has been conducted in a fixed-bed reactor. Micro-mesoporous composite molecular sieves of ZSM-5(38)/A1-MCM-41 with different Si/A1 ratios were prepared under hydrothermal conditions. With powder X-ray diffraction (XRD), the catalyst samples were characterized. GC-MS was used to analyze the bio-oil composition. The effects of catalysts on the pyrolysis product yields were investigated and the results were compared with the results of experiments performed without catalyst under the same pyrolitic conditions. The presence of the catalysts decreased the liquid yield, while increased the moisture content. The major improvement in the quality of bio-oil with the use of catalysts was the increase of DL-2,3-Butanediol. ZSM-5(38)/A1-MCM-41(20) favored the formation of phenol and 2-methoxy-phenol. In addition, these catalysts were all benefit for the generation of small molecular compounds. Also, it was found that ZSM-5(38) was better for the production of C4-C5 compounds. And micro-mesoporous composite molecular sieves mainly promoted the production of C6-C8 compounds.

Radio frequency ablation combined with transcatherterarterial chemo embolization and ethanol injection for hepatic carcinoma / 肿瘤研究与临床

Objective To explore the effect of radio frequency ablation (RFA) combined with transcatherterarterial chemo embolization (TACE) and percutaneous puncture hydrochloric acid injection(PHI) for hepatic tumors unable to resection. Methods The clinical data of 40 cases of patients with unable resection liver cancer (URLC) treated by RFA combined with TACE and PEI were analyzed retrospectively.Results There were 30 cases of primary hepatic tumor(PHT) and 10 cases of metastasis hepatic tumor(MPT) , in this series. Examination of ultrasound, CT and MRI showed the tumors shrink or steady in 39 patients.Among 30 patients with damage by ethanol, 18 cases were AFP positive before treatment and 16 cases of them AFP decreased to normal level after operation. No severe complication was seen in the series. Conclusion RFA combined with TACE and PEI is a safe, well tolerable and effective method for hepatic cancer, and may improve the treatment efficacy of URLC.

Predictive value of human fatty acid binding protein for myocardial ischemia and injury in perioperative period of cardiac surgery / 中华心血管病杂志

<p><b>OBJECTIVE</b>To evaluate the value of human fatty acid binding protein (h-FABP) in predicting myocardial ischemia and injury in the perioperative period of cardiac surgery, we observed the dynamic changes of h-FABP in perioperative period of patients underwent coronary artery bypass grafting and ventricular septal defects repairing surgery, and evaluated the relationship of h-FABP and ischemia modified albumin (IMA), CK-MB, cTnI.</p><p><b>METHODS</b>Patients underwent coronary artery bypass grafting (n=30) and ventricular septal defect repairing (n=30) surgery between February 2008 and December 2008 were included in this study. Venous blood sample was obtained at preoperative, aortic clamping, aortic unclamping of 10 min, 2 h, 6 h, 12 h, 24 h for the measurements of h-FABP, IMA, cTnI and CK-MB.</p><p><b>RESULTS</b>h-FABP and IMA changed in the same way at various examined time points, h-FABP changes also paralleled cTnI and CK-MB changes, h-FABP peaked early during myocardial ischemia and injury and returned to baseline level at 2 h post myocardial ischemia and injury. Linear correlation analysis showed that the peak value of h-FABP was positively correlated with IMA, CK-MB and cTnI in both CABG group (r = 0.948, 0.964 and 0.961, P < 0.05) and in the VSD group (r = 0.986, 0.978 and 0.957).</p><p><b>CONCLUSIONS</b>h-FABP is an early diagnostic parameter reflecting perioperative myocardial ischemia and injury in cardiac surgery. Quantitative h-FABP monitoring could predict the severity of myocardial ischemia and injury early during cardiac surgery.</p>