ABSTRACT
BACKGROUND@#Despite the advent of innovative knee prosthesis design, a consistent first-option knee implant design in total knee arthroplasty (TKA) remained unsettled. This study aimed to compare the clinical effects among posterior-stabilized (PS), cruciate-retaining (CR), bi-cruciate substituting (BCS), and bi-cruciate retaining designs for primary TKA.@*METHODS@#Electronic databases were systematically searched to identify eligible randomized controlled trials (RCTs) and cohort studies from inception up to July 30, 2021. The primary outcomes were the range of knee motion (ROM), and the secondary outcomes were the patient-reported outcome measures (PROMs) and complication and revision rates. Confidence in evidence was assessed using Confidence in Network Meta-Analysis. The Bayesian network meta-analysis was performed for synthesis.@*RESULTS@#A total of 15 RCTs and 18 cohort studies involving 3520 knees were included. The heterogeneity and inconsistency were acceptable. There was a significant difference in ROM at the early follow-up when PS was compared with CR (mean difference [MD] = 3.17, 95% confidence interval [CI] 0.07, 7.18) and BCS was compared with CR (MD = 9.69, 95% CI 2.18, 17.51). But at the long-term follow-up, there was no significant difference in ROM in any one knee implant compared with the others. No significant increase was found in the PROMs and complication and revision rates at the final follow-up time.@*CONCLUSIONS@#At early follow-up after TKA, PS and BCS knee implants significantly outperform the CR knee implant in ROM. But in the long run, the available evidence suggests different knee prostheses could make no difference in clinical outcomes after TKA with extended follow-up.
Subject(s)
Humans , Arthroplasty, Replacement, Knee , Posterior Cruciate Ligament/surgery , Network Meta-Analysis , Osteoarthritis, Knee/surgery , Knee Joint/surgery , Knee Prosthesis , Range of Motion, ArticularABSTRACT
OBJECTIVE@#To review the research progress of mitochondrial dynamics mediated by optic atrophy 1 (OPA1) in skeletal system diseases.@*METHODS@#The literatures about OPA1-mediated mitochondrial dynamics in recent years were reviewed, and the bioactive ingredients and drugs for the treatment of skeletal system diseases were summarized, which provided a new idea for the treatment of osteoarthritis.@*RESULTS@#OPA1 is a key factor involved in mitochondrial dynamics and energetics and in maintaining the stability of the mitochondrial genome. Accumulating evidence indicates that OPA1-mediated mitochondrial dynamics plays an important role in the regulation of skeletal system diseases such as osteoarthritis, osteoporosis, and osteosarcoma.@*CONCLUSION@#OPA1-mediated mitochondrial dynamics provides an important theoretical basis for the prevention and treatment of skeletal system diseases.
Subject(s)
Humans , GTP Phosphohydrolases/genetics , Mitochondrial Dynamics , Osteoarthritis , OsteoporosisABSTRACT
BACKGROUND@#Patellofemoral joint (PFJ) degeneration has traditionally been regarded as a contraindication to unicompartmental knee arthroplasty (UKA). More recently, some researchers have proposed that PFJ degeneration can be ignored in medial UKA, and others have proposed that this change should be reviewed in PFJ degenerative facets and severity. This study aimed to systematically evaluate the effect of PFJ degeneration on patient-reported outcome measures (PROMs) and revision rates after medial UKA.@*METHODS@#Electronic databases (PubMed, Embase, Web of Science, etc.) were searched for studies assessing the influence of PFJ degeneration on medial UKA. A random-effects meta-analysis was conducted for the Oxford knee score (OKS), Knee society score (KSS), and revision rates and stratified by PFJ degenerative facets (medial/lateral/trochlear/unspecified), severe PFJ degeneration (bone exposed), and bearing type (mobile/fixed). Heterogeneity was assessed by the Cochran Q test statistic and chi-squared tests with the I-squared statistic.@*RESULTS@#A total of 34 articles with 7007 knees (2267 with PFJ degeneration) were included (5762 mobile-bearing and 1145 fixed-bearing and 100 unspecified). Slight to moderate degenerative changes in the medial and trochlear facets did not decrease the OKS and KSS, and only lateral facets significantly decreased the OKS (mean difference [MD] = -2.18, P < 0.01) and KSS (MD = -2.61, P < 0.01). The severity degree of PFJ degeneration had no additional adverse effect on the OKS, KSS, or revision rates. For mobile-bearing UKA, only lateral PFJ degeneration significantly decreased the OKS (MD = -2.21, P < 0.01) and KSS (MD = -2.44, P < 0.01). For fixed-bearing UKA, no correlation was found between PROMs/revision rates and PFJ degeneration.@*CONCLUSION@#For medial mobile-bearing UKA, slight to moderate degenerative changes in the PFJ, except lateral facet, did not compromise PROMs or revision rates. For medial fixed-bearing UKA, although it might not be conclusive enough, PROMs or revision rates were not adversely affected by PFJ degeneration (regardless of the facet).
Subject(s)
Humans , Arthroplasty, Replacement, Knee , Patellofemoral Joint/surgery , Treatment Outcome , Osteoarthritis, Knee/surgery , Knee Prosthesis , Bone Diseases , Knee Joint/surgery , Retrospective StudiesABSTRACT
Objective:To explore the effect of combined problem-based learning (PBL) and lecture-based learning (LBL) on the teaching of skeletal motor system diseases for eight-year clinical medicine program students.Methods:The clinical eight-year medical students from Batch 2014 and 2015 participating in the teaching of "osteoarthritis" in the course of Skeletal Motor System Diseases in West China Clinical Medical College of Sichuan University were divided into control group (60 students) and experimental group (82 students). The control group was taught by LBL teaching method, while the experimental group was taught by PBL+LBL teaching method. A questionnaire survey was conducted to retrospectively analyze the teaching effects, including learning enthusiasm, knowledge understanding, thinking ability, teamwork ability, practical ability, self-learning ability and teacher-student relationship, as well as the evaluation of teaching satisfaction. The SPSS 22.0 software was used for t test and chi-square test. Results:The survey results showed that students in the experimental group were significantly superior to those in the control group in such aspects as learning enthusiasm (8.00±1.61 vs. 7.28±1.98), knowledge understanding (8.02±1.59 vs. 7.33±1.79), thinking ability (8.34±1.66 vs. 7.42±1.90), teamwork ability (8.32±1.76 vs. 6.60±2.79), practical ability (7.70±1.69 vs. 6.87 ± 2.57), self-learning ability (8.05±1.65 vs. 7.35±2.48) and teacher-student relationship (7.96±1.75 vs. 7.25±2.10), with statistically significant differences ( P<0.05). Meanwhile, the PBL+LBL group was more satisfied with the teaching mode than the LBL group, and the difference was statistically significant ( P<0.05). Conclusion:The application of PBL+LBL teaching method in clinical medicine eight-year program course teaching of "osteoarthritis" in Skeletal Motor System Diseases can effectively improve the learning enthusiasm of students, improve the quality of education, and obtain good teaching effect.
ABSTRACT
BACKGROUND@#Physical therapy is regarded as an essential aspect in achieving optimal outcomes following total knee arthroplasty (TKA). The coronavirus disease 2019 (COVID-19) pandemic has made face-to-face rehabilitation inaccessible. Virtual reality (VR) is increasingly regarded as a potentially effective option for offering health care interventions. This systematic review and meta-analysis investigate VR-based rehabilitation's effectiveness on outcomes following TKA.@*METHODS@#From inception to May 22, 2021, PubMed/Medline, Embase, Web of Science, the Cochrane Central Register of Controlled Trials, Scopus, PsycINFO, Physiotherapy Evidence Database, China National Knowledge Infrastructure, and Wanfang were comprehensively searched to identify randomized controlled trials (RCTs) evaluating the effect of VR-based rehabilitation on patients following TKA according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement and the Cochrane Handbook for Systematic Reviews of Interventions.@*RESULTS@#Eight studies were included in the systematic review, and seven studies were included in the meta-analysis. VR-based rehabilitation significantly improved visual analog scale (VAS) scores within 1 month (standardized mean difference [SMD]: -0.44; 95% confidence interval [CI]: -0.79 to -0.08, P = 0.02), the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) within 1 month (SMD: -0.71; 95% CI: -1.03 to -0.40, P < 0.01), and the Hospital for Special Surgery Knee Score (HSS) within 1 month and between 2 months and 3 months (MD: 7.62; 95% CI: 5.77 to 9.47, P < 0.01; MD: 10.15; 95% CI: 8.03 to 12.27, P < 0.01; respectively) following TKA compared to conventional rehabilitation. No significant difference was found in terms of the Timed Up and Go (TUG) test.@*CONCLUSIONS@#VR-based rehabilitation improved pain and function but not postural control following TKA compared to conventional rehabilitation. More high-quality RCTs are needed to prove the advantage of VR-based rehabilitation. As the COVID-19 pandemic continues, it is necessary to promote this rehabilitation model.
Subject(s)
Humans , Arthroplasty, Replacement, Knee , COVID-19 , Randomized Controlled Trials as Topic , SARS-CoV-2 , Virtual RealityABSTRACT
Objective: To study the expressions of Renin, angiotensin converting enzyme (ACE), angiotensin receptor 1 (AT1R), and AT2R in synovial tissue of osteoarthritis (OA) at different stages. Methods: The patients who were treated with upper knee amputation because of trauma or total knee arthroplasty for OA between January 2018 and December 2018 were enrolled. Among them, 32 patients who met the selection criteria were included in the study. According to the Kellgren-Lawrence (K-L) X-ray classification, they were allocated to normal synovial group (group A, n=9), moderate OA synovial group (group B, n=11, K-L level 3), and advanced OA synovial group (group C, n=12, K-L level 4). The relative expressions of Renin, ACE, AT1R, and AT2R mRNAs and proteins were detected by real-time fluorescence quantitative PCR (qRT-PCR) and Western blot. Results: The relative expressions of Renin, ACE, and AT1R mRNAs and proteins were significantly higher in group B and group C than in group A ( P<0.05). The relative expressions of ACE and AT1R mRNAs and proteins and Renin protein were significantly higher in group C than in group B ( P<0.05). However, the relative expressions of AT2R mRNA and protein were lower in group B and group C than in group A ( P<0.05), and in group C than in group B ( P<0.05). Conclusion: The expressions of Renin, ACE, and AT1R in synovial tissue of osteoarthritis significantly increase as the K-L level increased, and the expression of AT2R decreases. Renin, ACE, AT1R, and AT2R have a certain degree of correlation with the development of OA.
ABSTRACT
Objective@#To investigate the influence of displacement of femoral and tibial components on the biomechanics of femoral or tibial bone in coronal view.@*Methods@#A series of CT and MRI of the left knee joint of a Han male volunteer was taken and a three-dimensional finite element model of the healthy knee joint was established. The femoral component and the tibial component were designed with varus 6°, varus 3°, 0°, valgus 3°, and valgus 6°, and were combined into 25 three-dimensional finite element model (FEM) of medial unicompartmental knee arthroplasty. A 1 000 N load was applied along the femoral mechanical axis. The von Mises cloud stress distribution was observed. Moreover, the lateral compartment load ratio, the high contact stress of cancellous bone and medial cortical bone below the tibial component, the upper surface of the polyethylene liner, and the femoral cartilage in the lateral compartment was measured. The statistically significant indicators compared with the neutral position (0° varus or valgus of the tibia and the femoral prosthesis, and 5° posterior slope of tibia prosthesis) were identified by scatter plots to find the dense and sparse areas of point items. The optimal position of the femoral component and the tibial component was determined by the number of items with statistical significance in the sparse area.@*Results@#When the femoral component was placed at 0° position, there was no significant difference in the high contact stress of cancellous bone below the tibial component in the five groups. When the femoral component was placed at 0° position, the tibial component was 6° varus or 6° valgus and the stress was increased by 9.21±3.38 MPa and 9.08±4.13 MPa (P<0.05), respectively. With the changes of femoral and tibial components from 6° varus to 6° valgus, the high contact stress of the medial cortical bone below the tibia was gradually decreased (P<0.05). When the femoral component was placed at 0°, the tibial component changes from 6° varus to 6° valgus without significant difference in the high contact stress on the upper surface of each group of polyethylene gasket. Compared with the neutral position group, the high contact stress of the 6° varus or 6° valgus group were increased by 2.88±2.53 MPa and 3.47±2.86 MPa, respective ly (P<0.05). The lateral compartment load ratio and the high contact stress of lateral compartment femoral cartilage was gradually decreased (P<0.05), when the femoral and tibial components changed from 6° varus to 6° valgus. The number (2.8%, 1/36) of indicators in the sparse area (the combination of all combinations of femur or tibia from 3° varus to 3° valgus) was less than that (57.8%, 37/64) in the dense area (set of all combinations except sparse area), and the difference was significant (χ2=29.61, P<0.001).@*Conclusion@#It is suggested that the position of the femoral component and the tibial component in fixed medial unicompartmental arthroplasty should not exceed 3° varus or valgus in patients with standard lower limb alignment.
ABSTRACT
Objective To investigate the influence of displacement of femoral and tibial components on the biomechanics of femoral or tibial bone in coronal view.Methods A series of CT and MRI of the left knee joint of a Han male volunteer was taken and a three-dimensional finite element model of the healthy knee joint was established.The femoral component and the tibial component were designed with varus 6°,varus 3°,0°,valgus 3°,and valgus 6°,and were combined into 25 three-dimensional finite element model (FEM) of medial unicompartmental knee arthroplasty.A 1 000 N load was applied along the femoral mechanical axis.The von Mises cloud stress distribution was observed.Moreover,the lateral compartment load ratio,the high contact stress of cancellous bone and medial cortical bone below the tibial component,the upper surface of the polyethylene liner,and the femoral cartilage in the lateral compartment was measured.The statistically significant indicators compared with the neutral position (0° varus or valgus of the tibia and the femoral prosthesis,and 5° posterior slope of tibia prosthesis) were identified by scatter plots to find the dense and sparse areas of point items.The optimal position of the femoral component and the tibial component was determined by the number of items with statistical significance in the sparse area.Results When the femoral component was placed at 0° position,there was no significant difference in the high contact stress of cancellous bone below the tibial component in the five groups.When the femoral component was placed at 0° position,the tibial component was 6° varus or 6° valgus and the stress was increased by 9.21±3.38 MPa and 9.08±4.13 MPa (P＜0.05),respectively.With the changes of femoral and tibial components from 6° varus to 6° valgus,the high contact stress of the medial cortical bone below the tibia was gradually decreased (P＜ 0.05).When the femoral component was placed at 0°,the tibial component changes from 6° varus to 6° valgus without significant difference in the high contact stress on the upper surface of each group of polyethylene gasket.Compared with the neutral position group,the high contact stress of the 6° varus or 6° valgus group were increased by 2.88±2.53 MPa and 3.47±2.86 MPa,respectively (P＜0.05).The lateral compartment load ratio and the high contact stress of lateral compartment femoral cartilage was gradually decreased (P＜0.05),when the femoral and tibial components changed from 6° varus to 6° valgus.The number (2.8％,1/36) of indicators in the sparse area (the combination of all combinations of femur or tibia from 3° varus to 3° valgus) was less than that (57.8％,37/64) in the dense area (set of all combinations except sparse area),and the difference was significant (x2=29.61,P＜ 0.001).Conclusion It is suggested that the position of the femoral component and the tibial component in fixed medial unicom partmental arthroplasty should not exceed 3° varus or valgus in patients with standard lower limb alignment.