ABSTRACT
Objective@#To investigate the features of literature on hand-transmitted vibration in China, 1990-2016.@*Methods@#In September 2017, the studies on hand-transmitted vibration in China, which were published in Chinese or English during 1990-2016, with "China" and "Taiwan" as the places where author affiliations were located, were retrieved. A bibliometric analysis was performed to investigate the type of articles, publication time, the journals in which articles were published, author affiliations, author regions, and funding.@*Results@#A total of 205 articles on hand-transmitted vibration were retrieved. There were 7.59 articles on average published annually from 1990 to 2016. In the 205 articles, 114 (55.61%) were published in the journals indexed in one or two core journal databases. In the 64 journals, 22 (34.38%) were indexed in one or two core journal databases. The first authors were from 22 provincial regions (provinces, autonomous regions, or centrally administered municipalities) in China, with 152 articles (74.15%) by the authors in the top five regions. There were a total of 876 authors, and the co-authorship degree was 4.27 (876/205). Most of the first authors (136 articles, 66.34%) were affiliated with universities or institutes for prevention and control of occupational diseases. Among the 205 articles, 103 (50.24%) were original articles or investigations, and 72 (35.12%) were funded.@*Conclusion@#The studies on hand-transmitted vibration fluctuated and increased from 1990 to 2016, with a relatively concentrated distribution in terms of sources, regions, and institutions. Interregional and international academic exchange should be strengthened.
ABSTRACT
<p><b>OBJECTIVE</b>To evaluate the effect of taper and inserting angle on stability of micro-implants in type II bone and to provide theoretical evidence for clinical selection of taper and inserting angle.</p><p><b>METHODS</b>Three-dimensional finite element models of type II bone sections and micro-implants were fabricated. They were designed using different tapers (diameter between 1.1 to 1.6 mm, taper between 0 to 0.0625) and different inserting angles ranging from 30 degrees to 90 degrees (30 degrees, 45 degrees, 60 degrees, 75 degrees, 90 degrees). Effects on the maximum von Mises stresses in mandible and micro-implants, as well as on the maximum displacements in micro-implants, were analyzed under an applied 2 N horizontal force.</p><p><b>RESULTS</b>The inserting angle had a significant effect on stresses and displacements, with lower distribution of stresses and displacements occurring at 60 degrees. The effect of the taper was also related to the inserting angle. The minimum stresses were 5.013 4 MPa (cortical bone) and 25.1310 MPa (micro-implant) in model D at 60 degrees. The displacements of micro-implants were proportional to the taper.</p><p><b>CONCLUSION</b>The inserting angle has a significant effect on stability of micro-implants, and the recommended inserting angle is 60 degrees. The influence of taper on the stability of micro-implants is related to the inserting angle. The micro-implant with 0.0375 taper (maximum diameter is 1.6 mm, minimum diameter is 1.3 mm) is more suitable for type II bones.</p>