ABSTRACT
Objective To develop a musculoskeletal multi-body dynamic model of the patient-specific total knee replacement (TKR), and to simulate knee joint biomechanical characters of the patient during right-turn gait. Methods Based on the musculoskeletal dynamic software AnyBody and the method of force-dependent kinematics as well as the related data from a patient with TKR, the corresponding patient specific lower extremity musculoskeletal multi-body dynamic model was constructed and then used to simulate the right-turn gait of the patient. The knee contact forces, motion, muscle activations and ligament forces were predicted simultaneously by inverse dynamics analysis on such right-turn gait. ResultsThe root mean square error of the predicted average tibiofemoral medial contact force and lateral contact force were 285 N and 164 N, respectively, and the correlation coefficients were 0.95 and 0.61, respectively. The predicted average patellar contact force was 250 N. The predicted contact forces and muscle activations were consistent with those in vivo measurements obtained from the patient. In addition, the model also predicted the average range of tibiofemoral rotations of flexion-extension, internal-external, varus-valgus as 3°-47°, -3.4°-1.5°, 0.2°--1.5°, and the average range of tibiofemoral translations of anterior-posterior, inferior-superior, medial-lateral as 2.6-9 mm, 1.6-3.2 mm, 4.2-5.2 mm, respectively. The predicted average peak value of the medial, lateral collateral ligament force and posterior cruciate ligament force were 190, 108, 108 N, respectively. Conclusions The developed model can predict in vivo knee joint biomechanics, which offers a robust computational platform for future study on the failure mechanisms of knee prosthesis in clinic.
ABSTRACT
Objective To investigate the wear mechanism of artificial hip joints and the criteria for wear life definition, analyze the causes of abnormal wear and the clinical manifestations of wear failure, establish the reasoning route of failure incidents. Methods The wear process and early factors on abnormal wear in artificial hip joints were studied through elastohydrodynamic lubrication computation and finite element analysis; the service life of artificial hip joints was determined through establishing criteria for wear life definition; the clinical manifestations of wear failure were introduced and classified through wear-osteolysis morphological matrix; the reasoning logic of failure incidents was established through clinical investigation. Results The minimal synovium thickness and contact stress between the femoral head and the acetabular cup were calculated, and the effect of relevant parameters was studied as theoretical references for wear analysis; the criteria on wear life definition of artificial hip joints were proposed, namely the mechanistic failure due to geometric change in artificial hip joints and the biological failure due to osteolysis; nine kinds of clinical manifestation for wear failure were found; the reasoning route for failure incidents was presented. Conclusions Primary wear process in artificial hip joints includes boundary and mixed friction, adhesive, ploughing and third-body wear; surface quality, fit clearance between the acetabular cup and the femoral head, and roundness have great impact on early abnormal wear; normal mechanistic life of metal-UHMWPE artificial hip joint can reach 40 years, but its maximum biological life is no more than 10-15 years, which is the constraint of prosthesis life today; the diversity of clinical manifestations for wear failure is the morphological Results of mechanical wear and osteolysis, which is helpful for the reasoning route of failure incidents.