ABSTRACT
It has become a common consensus that resource conservation and intensive recycling for improving resource utilization efficiency is an important way to achieve carbon peak and carbon neutrality(dual carbon). Traditonal Chinese medicine(TCM)resources as national strategic resources are the material basis and fundamental guarantee for the development of TCM industry and health services. However, the rapid growth of China's TCM industry and the continuous expansion and extension of the industrial chain have exposed the low efficiency of TCM resources. Resource waste and environmental pollution caused by the treatment and discharge of TCM waste have emerged as major problems faced by the development of the industry, which has aroused wide concern. Considering the dual carbon goals, this paper expounds the role and potential of TCM resource recycling and circular economy industry development. Taking the typical model of TCM resource recycling as the case of circular economy industry in reducing carbon source and increasing carbon sink, this paper puts forward the suggestions for the TCM circular economy industry serving the double carbon goals. The suggestions mainly include strengthening the policy and strategic leading role of the double carbon goals, building an objective evaluation system of low-carbon emission reduction in the whole industrial chain of TCM resources, building an industrial demonstration park for the recycling of TCM resources, and promoting the establishment of a circular economy system of the whole industrial chain of TCM resources. These measures are expected to guide the green transformation of TCM resource industry from linear economic model to circular economy model, provide support for improving the utilization efficiency and sustainable development of TCM resources, and facilitate the low-carbon and efficient development of TCM resource industry and the achievement of the double carbon goals.
Subject(s)
Medicine, Chinese Traditional , Equipment Reuse , Goals , Environmental Pollution , Economic Development , Carbon , ChinaABSTRACT
To explore the permeation mechanism of micro-molecule medicinal ingredients of water extract of tradition Chinese medicine(TCM) in membrane separation process. With phenolic acid components as the model solute, five phenolic acids with similar molecular weight and structure, namely gallic acid, protocatechuate acid, 4-hydroxybenzoic acid, 3-hydroxybenzoic acid and salicylic acid, were selected in the PES membrane separation experiments. With the relative flux and the transmission rate as indexes, the scanning electron microscopy(SEM) and the electrochemical impedance spectroscopy(EIS) were used to analyze the permeation mechanism of different phenolic acid components. The results showed phenolic acids with similar molecular weight had different permeation behaviors, with decreased relative flux and increased solute permeation with the increase of solute concentration. According to the permeation behavior analyzed by the molecular structure of solute, the transmission rate of phenolic acids increased with the increase of the number of hydroxyl, and the order of substituent positions of phenolic acids based on the permeation rate as follows: para-substituted > meta-substitution > ortho-substitution. Electrochemical impedance spectroscopy reflected the role of charge repulsion in the membrane process; that is to say, the greater the resistance is, the less the solute permeation is. Therefore, the permeation phenomenon of the phenolic acid components in the PES membrane is not only the result of simple sieving mechanisms, but also has the effects of steric hindrance and charge repulsion during the membrane process.
Subject(s)
Drugs, Chinese Herbal/analysis , Hydroxybenzoates/isolation & purification , Medicine, Chinese Traditional , Membranes, Artificial , Molecular Structure , Molecular WeightABSTRACT
Curcumin( Cur) is a natural active substance extracted from the roots or tubers of traditional Chinese medicinal materials. It has anti-inflammatory and anti-tumor activities on brain diseases. Due to the poor stability,low solubility,poor absorption and low bioavailability of curcumin,N-acetyl-L-cysteine( NAC) was used as an absorption enhancer and mixed with curcumin to improve the absorption of curcumin in the body. In this paper,curcumin was smashed by airflow pulverization,and Cur-NAC mixtures were prepared by being grinded with liquid. Then,the raw material and the product were analyzed by differential scanning calorimetry( DSC),X-ray diffraction( XRD) for structural characterization. The dissolution was determined by high performance liquid chromatography( HPLC) analysis. The characteristic peaks of the samples prepared by grinding method were similar to those of the raw materials,while the melting temperature and the accumulated dissolution degree were not significantly changed. The crystal forms of the products were not changed,and no new crystal form was formed after grinding. After the administration of intranasal powder,blood samples were collected from the orbit,while the whole brain tissues were removed from the skull and dissected into 10 anatomical regions. The concentrations of curcumin in these samples were determined by UPLC-MS/MS. The concentrations of curcumin in plasma and brain were compared at different time points. After intranasal administration of two drugs,it was found that the concentration of curcumin after sniffing up the mixtures in plasma was high,and the concentration of the drug in the olfactory bulb,hippocampus,and pons was increased significantly. Within 0. 083-0. 5 h,the olfactory bulb,piriform lobe and hippocampus remained high concentrations,the endodermis,striatum,hypothalamus and midbrain reached high concentrations within 1-3 h; and the cerebellum,pons and brain extension maintained relatively high concentrations within 3-7 h. The experiment showed that nasal administration of Cur-NAC mixtures can significantly improve the bioavailability of curcumin,and lead to significant differences in brain tissue distribution.
Subject(s)
Animals , Rats , Acetylcysteine , Pharmacology , Administration, Intranasal , Biological Availability , Brain , Brain Chemistry , Chromatography, Liquid , Curcumin , Pharmacokinetics , Tandem Mass Spectrometry , Tissue DistributionABSTRACT
The development of human society is mainly marked by materials. “Academic Leadership Series, National Science Think Tank, Development Strategies of Chinese Disciplines in the Next 10 Years: Material Science” points out that: Material science has become the essential link for the development and deepening of modern science and technology, and plays a basic and leading role in the development of science and technology; The emergence of a new type of material can also drive the birth of an industry. The excessive consumption of resources and energy by process industry and the pollution of environment have become bottlenecks restricting the sustainable development of human society. Chemical engineering has always been important to achieve efficient transformation of materials and effective utilization of energy. In the 21st century, the objectives of chemical engineering have been transformed into: Relying on superior performance, friendly environment, and fully function, new structural and functional materials with good and complete functions to develop new process industrial technology and form new process flow and integration technology in order to achieve the goal of high efficiency, low consumption, and pollution-free. Membrane technology, with advanced separation materials as carriers, can achieve separation of substances and molecules at mild and low cost conditions. It is especially suitable for the needs of modern industry for energy saving, recycling of low-grade raw materials, and eliminating environmental pollution. It has become key technologies to solve the major problems in the fields of energy, water resources and environment. The application of membrane materials and equipment to the Chinese materia medica (CMM) industry can significantly improve the production efficiency. In this paper, through the analysis of the application of membrane materials and technology in foreign and domestic pharmaceutical industries, facing the industrial upgrading and green development of the application process of CMM industry, it is proposed to introduce the theory and method of material chemical engineering into the field of CMM, to carry out original research with independent intellectual property rights, and to construct a new membrane-based approach. The new separation procedure, separation process and exclusive equipment with separation technology as the core realize energy saving and emission reduction in the production process of CMM. Through expatiating on the basic research and engineering application of industrialization of separation process of CMM and its complex systems such as water extraction system and oil-water mixture system in the past 20 years, the project team provides theoretical basis and application demonstration for the design, integration, and application of new separation process of CMM based on special membrane technology.
ABSTRACT
The analysis of Forsythia suspensa was performed on Waters Symmetry C18 column( 4. 6 mm×250 mm,5 μm) and mobile phase was methanol( A)-0. 1% formic acid aqueous solution( B) with the elution gradient. Column temperature was maintained at 30℃,and the flow rate was 1. 0 m L·min-1 with detection wavelength 265 nm. The HPLC-PDA fingerprint of F. suspensa was optimized.Chemical constituents in F. suspensa were analyzed by UFLC-Q-TOF-MS in positive and negative ion mode. The quality of 48 batches of F. suspensa from different habitats,processing methods and specifications was evaluated by similarity evaluation and cluster analysis.The 18 common peaks were confirmed. The similarity of F. suspensa from different habitats was more than 0. 98,and 56 chemical constituents were identified. Different processing methods had great influence on the quality of F. suspensa. Compared with boiled and direct drying,the quality of F. suspensa processed by sun-drying was obviously decreased. The similarity was about 0. 58. Different specifications of F. suspensa also had obvious distinction,and the similarity was about 0. 78. The effective components of grown F. suspensa,such as forsythoside A and phillyrin,were significantly reduced. The results of cluster analysis were basically consistent with the results of similarity evaluation. The establishment of fingerprint and the recognition of chemical pattern of F. suspensa can provide a more comprehensive reference for the quality control of herbs.
Subject(s)
Chromatography, High Pressure Liquid , Drugs, Chinese Herbal/chemistry , Forsythia/chemistry , Quality ControlABSTRACT
To investigate the feasibility of vapor permeation membrane technology in separating essential oil from oil-water extract by taking the Forsythia suspensa as an example. The polydimethylsiloxane/polyvinylidene fluoride (PDMS/PVDF) composite flat membrane and a polyvinylidene fluoride (PVDF) flat membrane was collected as the membrane material respectively. Two kinds of membrane osmotic liquids were collected by self-made vapor permeation device. The yield of essential oil separated and enriched from two kinds of membrane materials was calculated, and the microscopic changes of membrane materials were analyzed and compared. Meanwhile, gas chromatography-mass spectrometry (GC-MS) was used to compare and analyze the differences in chemical compositions of essential oil between traditional steam distillation, PVDF membrane enriched method and PDMS/PVDF membrane enriched method. The results showed that the yield of essential oil enriched by PVDF membrane was significantly higher than that of PDMS/PVDF membrane, and the GC-MS spectrum showed that the content of main compositions was higher than that of PDMS/PVDF membrane; The GC-MS spectra showed that the components of essential oil enriched by PVDF membrane were basically the same as those obtained by traditional steam distillation. The above results showed that vapor permeation membrane separation technology shall be feasible for the separation of Forsythia essential oil-bearing water body, and PVDF membrane was more suitable for separation and enrichment of Forsythia essential oil than PDMS/PVDF membrane.
ABSTRACT
In order to analyze the law of membrane permeation of different alkaloids, seven traditional Chinese medicine alkaloids with different parent nucleus and substituent structures, including berberine, palmatine, sinomenine, matrine, oxymatrine, sophoridine, and tetrandrine, were prepared into the simulated solution with same molar concentration, and the membrane penetrating experiments with membrane RC1K and membrane RC5K were carried out. The dynamic transmittance, the total transmittance and the total adsorption rate of each substance were measured, and the scanning electron microscopy (SEM) images of the membrane surface before and after the membrane experiment were considered to predict and analyze the reason of differences in dynamic transmittance of different alkaloids. The results showed that there were significant differences in the dynamic transmittance of the chemical constituents of different alkaloids during penetrating the two membranes. The contamination degree on the surface of the membrane material was also different. The transmittance of the same compound through the RC5K membrane was larger than that through RC1K membrane. Within a certain range, the smaller the pore size of the membrane, the better the selective screening effect on the chemical constituents of traditional Chinese medicine. All the membrane surfaces were less polluted. The difference in transmittance between different substances on the same membrane showed a positive correlation with the difference in structural complexity, providing an experimental basis for the surface modification design in contamination control of membrane materials. In the design of membrane modified material, the surface properties of the membrane can be improved by grafting different polar groups, thereby changing the adsorption characteristics of the membrane surface. The pore size was designed accordingly to achieve the high transmittance and low pollution of the corresponding compounds.
Subject(s)
Berberine Alkaloids , Chemistry , Drugs, Chinese Herbal , Chemistry , Medicine, Chinese Traditional , PermeabilityABSTRACT
This study was designed to explore the impact of Huanglian Jiedu Decoction (HLJDT) on macrophage inflammation reaction using the network pharmacology method. Glycolysis, sphingolipid metabolism and glutamine metabolism were also investigated for "multi-component, multi-target and multi-pathway", which supports a foundation for drug innovative research. The TCMSP database was used to screen the active components of HLJDT, the target protein predicted by PharmMapper database and the DAVID database for pathways annotation and analysis. The Cytoscape 3.2.1 software was used to construct the active componenttarget-pathway network map and GENEMANIA database for protein interaction analysis. System Dock Database Site is used in verification of molecular docking. The results showed that 84 active ingredients were screened in HLJDT with a total of 111 target targets. Fourteen pathways are affected according to 13 macrophage-related inflammatory proteins, and 8 pathways including 34 target proteins from glycolysis, sphingolipid metabolism and glutamine metabolism. Inflammation-related proteins and metabolism-related proteins can interact with each other through physical correlation, protein co-expression, etc. Berberine, baicalin and geniposide combined well with 5 important targets. Huanglian Jiedu Decoction may act on the glycolysis and sphingolipid pathways to regulate macrophage inflammatory responses.
ABSTRACT
Objective To explore the effect of macromolecule on the mass transfer process of berberine during membrane separation. Methods The membrane filtration experiment combined with molecular dynamics simulation were used to analyse and predict the interaction between micromolecule effective substance and the macromolecule commonly existed in the water extract of Chinese material medica. Firstly, the mixed simulation solution of berberine and macromolecule was prepared to carry out the membrane separation experiment. The transmittance and adsorption rate of berberine, the rejection and adsorption rate of macromolecule was determined to analyse the effect of macromolecule on the transmittance of berberine in the membrane filtration process. Then, the molecular dynamics simulation software was used to establish simulation system to calculate the interaction between berberine and macromolecule, so as to analyse the effect of macromolecule on the mass transfer process of berberine. Results The permeability of berberine was significantly reduced after being mixed with the macromolecule. The total interaction energy between protein, starch, pectin and berberine was calculated as -122.723 3, -83.613 0, and -125.815 9 kJ/mol, respectively. The interaction energy between starch and berberine was minimum, and the interaction energy between protein and berberine was similar as that between pectin and berberine. Conclusion In membrane separation process, the interaction between the macromolecule and berberine is the main factor affecting the mass transfer process of berberine, and the strength of the interaction results in the difference in the permeability of berberine.
ABSTRACT
This study was designed to explore the "multi-components, multi-targets and multi-pathways" intervention mechanism of Huanglian Jiedu decoction (HLJDD) in the treatment of Alzheimer's disease (AD) by pharmacological network technology, which may establish a foundation for drug development and innovative research. Seventeen active constituents of HLJDD with anti-AD activities were submitted to PharmMapper and Molecule Annotation System (MAS 3.0) bioinformatics softwares to predict the target proteins and carry out related KEGG pathways annotation respectively. The network of "active compound-target-pathway" was constructed and analyzed using the Cytoscape 3.4.0 software. The results suggest that 47 pathways are affected by the 17 active components through 59 target proteins, in which 4 target proteins are related to AD and 2 pathways related to neuroinflammation, respectively. The effect of HLJDD on AD may be dependent on clearing/reducing β-amyloid protein, inhibiting Tau hyperphosphorylation, anti-inflammation and immunoregulation.
ABSTRACT
The pollution and destruction of water environment has become one of the main environmental problems in today’s world, and the resource recycling of wastewater from pharmaceutical process of Chinese materia medica (CMM) is the important content in the research of water environment comprehensive prevention and control of water pollution purification. Furthermore, it is the inevitable choice on the green development and industrial upgrading of CMM industry. The wastewater produced in the pharmaceutical process of CMM has the characteristics of unstable composition, many kinds of organic pollutants and varied from different factories, and all belongs to one of the high concentration organic wastewater which is difficult to handle. In this article, the basic thought of “primary treatment-secondary treatment based on resource of effective compositions-third treatment” is been put up according to the characteristic compositions and source of wastewater. In view of the application of a large number of industrial water treatment new technology and new method, the method of using membrane to deal with wastewater is proposed, because of the technology advantages and the rapid growth of market share in water-making and wastewater treatment. Meanwhile, membrane is able to establish effective way of energy saving and environmental friendly integrated technology group. This study provides a new way for the reduction and resource utilization of CMM wastewater.
ABSTRACT
The metabolic effect of Huanglian-Huangqin herb pairs on cerebral ischemia rats was studied by using metabolomic method. The rat model of ischemia reperfusion injury induced by introduction of transient middle cerebral artery occlusion (MCAO) followed by reperfusion. Ultra high performance liquid chromatography-series four pole time of flight mass spectrometry method(UPLC-Q-TOF/MS), Markerlynx software, and principal component analysis and partial least-squares discriminant analysis were used to analyze the different endogenous metabolites among the urine samples of sham rats, cerebral ischemia model rats, Huanglian groups (HL), Huangqin groups (HQ) and Huanglian-Huangqin herb pairs groups (LQ) was achieved, combined with accurate information about the endogenous metabolites level and secondary fragment ions, retrieval and identification of possible biological markers, metabolic pathway which build in MetPA database. The 20 potential biomarkers were found in the urine of rats with cerebral ischemia, which mainly involved in the neurotransmitter regulation, amino acid metabolism, energy metabolism, lipid metabolism and so on. Those metabolic pathways were disturbed in cerebral ischemia model rats, the principal component analysis showed that the normal and cerebral ischemia model is clearly distinguished, and the compound can be given to the normal state of change after HL, HQ, LQ administration. This study index the interpretation of cerebral ischemia rat metabolism group and mechanism, the embodiment of metabonomics can reflect the physiological and metabolic state, which can better reflect the traditional Chinese medicine as a whole view, system view and the features of multi ingredient synergistic or antagonistic effects.
ABSTRACT
In order to explore the adsorption characteristics of proteins on the membrane surface and the effect of protein solution environment on the permeation behavior of berberine, berberine and proteins were used as the research object to prepare simulated solution. Low field NMR, static adsorption experiment and membrane separation experiment were used to study the interaction between the proteins and ceramic membrane or between the proteins and berberine. The static adsorption capacity of proteins, membrane relative flux, rejection rate of proteins, transmittance rate of berberine and the adsorption rate of proteins and berberine were used as the evaluation index. Meanwhile, the membrane resistance distribution, the particle size distribution and the scanning electron microscope (SEM) were determined to investigate the adsorption characteristics of proteins on ceramic membrane and the effect on membrane separation process of berberine. The results showed that the ceramic membrane could adsorb the proteins and the adsorption model was consistent with Langmuir adsorption model. In simulating the membrane separation process, proteins were the main factor to cause membrane fouling. However, when the concentration of proteins was 1 g•L⁻¹, the proteins had no significant effect on membrane separation process of berberine.
ABSTRACT
Taking α-asarone as model drug, mono methoxy polyethylene glycol-polylactic acid copolymer (mPEG-PLA) as the drug carrier material to prepare drug-loading nanoparticles by premix membrane emulsification for nasal administration. The prepared nanoparticles were spherical with smooth surface and average particle size of 360 nm. Polydispersity index (PDI) was 0. 030, average drug loading of (11.5 ± 0.045) % (n = 3), and the encapsulation efficiency of (86.34 ± 0.11) % (n = 3). X-ray diffraction and differential scanning calorimetry results showed that, α-asarone existed in mPEG-PLA carrier in amorphous or molecular state, different from simple physical mixture. In the in vitro release test in simulated human nasal cavity, α-asarone apis can be released quickly at close to 94% at 102 h, in line with the first-order kinetics (R² = 0.981 9). mPEG-PLA drug-loading nanoparticles release only 54%, with slow release effect, in line with Riger-Peppas model (R² = 0.967 9, n = 0.630 2), for non-fick diffusion, released by the spread of drugs and skeleton dissolution dual control. This provided the foundation for nasal drug delivery in vivo pharmacokinetic study.
Subject(s)
Administration, Intranasal , Anisoles , Chemistry , Calorimetry, Differential Scanning , Nanoparticles , Chemistry , Polyesters , Chemistry , Polyethylene Glycols , Chemistry , Solubility , X-Ray DiffractionABSTRACT
The objects of research on the resources chemistry of Chinese medicinal materials (RCCMM) are promotion of efficient production, rational utilization and improving quality of CMM and natural products. The development of TCM cause depends on the efficient utilization and sustainable development of CMM, hinges on the technologies and methods for using and discovering medicinal biological resources, stand or fall on the extension of industy chains, detailed utilizaion of resource chemical components by multi-way, multi-level. All of these may help to the recycling utilization and sound development of RCMM. In this article, five respects were discussed to the RCCMM researches and resources recycling utilization ways and goals and tasks. First, based on the principle of resource scarcity, discovering or replacing CMM resources, protecting the rare or endangered species or resources. Second, based on the multifunctionality of CMM, realizing the value-added and value compensation, and promoting the utilization efficiency through systermatic and detailed exploitation and utilization. Third, based on the resource conservation and environment-friendly, reducing raw material consumption, lowering cost, promoting recycling utilization and elevating utilization efficiency. Fourth, based on the stratege of turning harm into good, using the invasive alien biological resources by multi-ways and enriching the medicial resources. Fifth, based on the method of structure modification of chemical components, exploring and enhancing the utility value of resouces chemical substances. These data should provide references and attention for improving the utilization efficiency, promoting the development of recycling economy, and changing the mode of economic growth of agriculture and industry of CMM fundamentally.
Subject(s)
Agriculture , Economics , China , Conservation of Natural Resources , Economics , Drugs, Chinese Herbal , Chemistry , Economics , Materia Medica , Chemistry , Economics , Medicine, Chinese Traditional , Economics , Plants, Medicinal , ChemistryABSTRACT
Tetradrine-tashionone II(A)-PLGA composite microspheres were prepared by the SPG membrane emulsification method, and the characterization of tetradrine-tashionone II(A) -PLGA composite microspheres were studied in this experiment. The results of IR, DSC and XRD showed that teradrine and tashionone II(A) in composite microspheres were highly dispersed in the PLGA with amorphous form. The results of tetradrine-tashionone II(A) -PLGA composite microspheres in vitro release experiment showed that the cumulative release amounts of tetradrine and tashionone II(A) were 6.44% and 3.60% in 24 h, and the cumulative release amounts of tetradrine and tashionone II(A) were 89.02% and 21.24% in 17 d. The process of drug in vitro release accorded with the model of Riger-Peppas. Tetradrine-tashionone II(A) -PLGA composite microspheres had slow-release effect, and it could significantly reduce the burst release, prolong the therapeutic time, decrease the dosage of drugs and provide a new idea and method to prepare traditional Chinese medicine compound.
Subject(s)
Benzofurans , Chemistry , Benzylisoquinolines , Chemistry , Drug Carriers , Chemistry , Drug Compounding , Methods , Drugs, Chinese Herbal , Chemistry , Kinetics , Lactic Acid , Chemistry , Microspheres , Particle Size , Polyglycolic Acid , ChemistryABSTRACT
<p><b>OBJECTIVE</b>By studying the process of reverse osmosis system for traditional Chinese medicine materials physicochemical parameters affecting the osmotic pressure of its relevance, new compound system reverse osmosis process design methods were explored.</p><p><b>METHOD</b>Three concentrations materials for high, middle and low were dubbed with Sini decoction as a model drug, and pretreated by 50 thousand relative molecular weight cut-off ultrafiltration membrane. The viscosity, turbidity, conductivity, salinity, TDS, pH value and osmotic pressure of each sample were determined after the reverse osmosis to study the physical and chemical parameters between their respective correlations with the osmotic pressure, and characterized by HPLC chromatograms showing changes before and after the main chemical composition of samples of reverse osmosis.</p><p><b>RESULT</b>Conductivity-osmotic pressure, salinity-osmotic pressure of the linear correlation coefficient, TDS-osmotic pressure between the three sets of parameters were 0.963 8, 0.932 7, 0.973 7, respectively. Reverse osmosis concentrate and its characteristic spectrum ultrafiltrate HPLC similarity were up to 0. 968 or more, except the low concentrations.</p><p><b>CONCLUSION</b>There is a significant correlation between the three physicochemical parameters (conductivity, salinity, TDS) and osmotic pressure of each sample system, and there is also significant linear correlation between salinity, conductivity, TDS. The original chemical composition of Sini decoction material concentrate was completely remained after the process of reverse osmosis.</p>
Subject(s)
Chemical Phenomena , Chemistry, Pharmaceutical , Methods , Chromatography, High Pressure Liquid , Drugs, Chinese Herbal , Chemistry , Molecular Weight , Osmotic Pressure , Surface Properties , ViscosityABSTRACT
Relatively uniform-sized nanoparticles made of poly (lactic-co-glycolic acid) (PLGA) were prepared by premix membrane emulsification method. After the drug loading property was completed, the dynamic tissue distribution of nanoparticles was recorded. With the average particle size and span as indexes, membrane pore size, number of passing membrane times, membrane pressure, volume ratio of oil-water phase and the concentration of poly(vinyl alcohol) (PVA) in external water phase were investigated by single factor test, the optimum preparation technology of blank PLGA nanlparticles was as following: pore size of SPG membrane was 1 μm, membrane pressure was 1. 15 MPa, the number of passing membrane time was 3, the mass fraction of PVA of 2%, volume ratio of oil-water phase of 1 : 5. Prepared nanoparticles were round with smooth surface, the mean diameter was 332.6 nm, span was 0.010, the confocal laser scanning microscope (CLSM) concluded that fluorescent substance is uniform composizion in PLGA nanoparticle, and the in vivo imaging technology in mice include that the nanoparticles show good liver and spleen targeting property.
Subject(s)
Animals , Mice , Drug Carriers , Chemistry , Drug Delivery Systems , Emulsions , Chemistry , Fluorescent Dyes , Chemistry , Lactic Acid , Chemistry , Mice, Nude , Nanoparticles , Chemistry , Particle Size , Polyglycolic Acid , ChemistryABSTRACT
To optimize the pretreatment of Huanglian Jiedu decoction before ceramic membranes and verify the effect of different pretreatments in multiple model system existed in Chinese herb aqueous extract. The solution environment of Huanglian Jiedu decoction was adjusted by different pretreatments. The flux of microfiltration, transmittance of the ingredients and removal rate of common polymers were as indicators to study the effect of different solution environment It was found that flocculation had higher stable permeate flux, followed by vacuuming filtration and adjusting pH to 9. The removal rate of common polymers was comparatively high. The removal rate of protein was slightly lower than the simulated solution. The transmittance of index components were higher when adjust pH and flocculation. Membrane blocking resistance was the major factor in membrane fouling. Based on the above indicators, the effect of flocculation was comparatively significant, followed by adjusting pH to 9.
Subject(s)
Ceramics , Chemistry , Drugs, Chinese Herbal , Chemistry , Flocculation , Membranes, Artificial , Polymers , Chemistry , Solutions , Chemistry , Ultrafiltration , MethodsABSTRACT
For effective inhalable dry-powder drug delivery, tetrandrine-PLGA (polylactic-co-glycolic acid) nanocomposite particles have been developed to overcome the disadvantages of nanoparticles and microparticles. The primary nanoparticles were prepared by using premix membrane emulsification method. To prepare second particles, they were spray dried. The final particles were characterized by scanning electron microscopy (SEM), dry laser particle size analysis, high performance liquid chromatography (HPLC), X-ray diffraction (XRD), differential scanning calorimetry (DSC), infrared analysis (IR) and confocal laser scanning microscope (CLSM). The average size of the primary particles was (337.5 ± 6.2) nm, while that second particles was (3.675 ± 0.16) μm which can be decomposed into primary nanoparticles in water. And the second particles were solid sphere-like with the drug dispersed as armorphous form in them. It is a reference for components delivery to lung in a new form.