ABSTRACT
Objective:To explore the radiological protection measures for yttrium-90 ( 90Y)-loaded resin microsphere therapy in clinical application. Methods:The surgical operation process for 90Y-loaded resin microsphere therapy was simulated, involving measurement of ambient dose equivalent rates at various stages: preoperative preparation (dominated by drug package), drug transfer, intraoperative procedures (drug operation and injection), and postoperative care and observation within the hospital. Based on the simulation, the protection measures in clinical application were analyzed. Results:The dose equivalent rate ranged from 0.12 to 0.42 μSv/h around the active chamber and from 1.04 to 3.32 μSv/h in the fume hood. Around the digital subtraction angiography (DSA) room, the maximum dose equivalent rate was 0.78 μSv/h when 90Y and DSA were applied simultaneously and 0.36 μSv/h when 99Tc m and DSA were applied. For the first operating position in the fluoroscopy protection area, the maximum dose equivalent rate was 13.19 μSv/h at 155 cm height when only 90Y was applied, and 315.01 μSv/h at 80 cm height when 90Y and DSA were applied. For the second operating position, the maximum dose equivalent rate was 6.28 μSv/h at 155 cm height when only 90Y was applied and 291.03 μSv/h at the same height when 90Y and DSA were applied. The dose-equivalent rates ranged from 0.11 to 0.58 μSv/h around the dedicated ward for postoperative patients. Conclusions:The existing shielding measures, such as those in the nuclear medicine department and interventional room, meet the radiation protection requirements for 90Y-loaded resin microsphere therapy. However, it is still necessary to conduct a scientific assessment based on the actual situation. Additionally, radiation protection measures and surface contamination treatment should be enhanced during drug operation.
ABSTRACT
Background As one of the common tools for job burnout assessment, Maslach Burnout Inventory-General Survey (MBI-GS), its reliability and validity across different populations in China have not been examined yet. Objective To evaluate the reliability and validity of General Burnout Scale (GBS) by multiple occupational groups through the translation and preliminary test of MBI-GS. Methods Based on the Special Project of Occupational Hazards in Key Populations led by the Institute of Occupational Health and Poison Control, China CDC, key occupational groups in five typical industries were selected by multi-stage stratified cluster sampling, including teachers, firefighters, manufacturing workers, medical staff, and traffic police. Confirmatory factor analysis (CFA) was used to evaluate the construct validity of GBS by single-factor, two-factor, and three-factor structure models. The model fitness was assessed by ratio of the chi-square statistic to the respective degrees of freedom (χ2/ν), root mean square error of approximation (RMSEA), goodness-of-fit index (GFI), comparative fit index (CFI), and parsimony-adjusted non-normed fit index (PNFI). Spearman correlation analysis was used to calculate the criterion validity of GBS with occupational stress, depressive symptoms, and sleep disorders. Cronbach's α coefficient and composite reliability (CR) coefficient were used to evaluate the internal consistency reliability of GBS. Results A total of 3485 subjects were surveyed in this study, 3375 valid questionnaires were recovered with a valid response rate of 96.84%. The results of CFA showed that in the adjusted three-factor structure model of GBS (exhaustion, cynicism, and professional efficacy), the χ2/ν < 4, the RMSEA ranged from 0.032 to 0.069, the GFI > 0.90, the CFI > 0.90, and the PNFI > 0.70, which illustrated a good fitness than that of the single- or the two-factor structure models in different occupational groups. The Spearman correlation analysis results showed that occupational stress, depressive symptoms, and sleep disorders were positively correlated with exhaustion and cynicism dimensions, and negatively correlated with professional efficacy dimension of the GBS, with the \begin{document}$ \left| r \right| $\end{document} ranging from 0.139 to 0.662 (P<0.05) in overall subjects. For traffic police and firefighters, professional efficacy was not correlated with depressive symptoms or sleep disorders (P>0.05). The Cronbach's α coefficients ranged from 0.819 to 0.899, and the CR values ranged from 0.941 to 0.978 in different occupational groups. Conclusion The GBS shows high reliability and validity, as well as good application effects in different occupational groups.
ABSTRACT
Background Healthcare workers suffer from great internal and external pressure and are prone to burnout. Existing studies have shown that depressive symptoms are important influencing factors of burnout, both of which are closely related to job stress. Objective To analyze overall prevalence of burnout among healthcare workers using a new survey tool developed by our team, and to reveal potential influencing factors related to burnout. Methods A cross-sectional multi-center study was conducted in August–October 2019 and June–September 2020, using multi-stage stratified cluster sampling. A total of 8738 healthcare workers from 22 hospitals in 5 provinces (Shandong, Hubei, Hunan, Guangdong, and Chongqing) of China were selected in this study. A set of survey questionnaires, including the general information questionnaire and the Chinese versions of General Burnout Scale, Core Occupational Stress Scale, Patient Health Questionnaire-9, and Self-administered Sleep Questionnaire were distributed. Independent samples t-test or one-way ANOVA were employed for inter-group comparison of burnout. Spearman correlation was used to evaluate correlations among burnout, depressive symptoms, and occupational stress. Stepwise linear regression was conducted to identify factors independently associated with burnout. Process plug-in was used to test potential mediating effect of depressive symptoms on occupational stress and burnout. Results Of the 8738 questionnaires distributed, 8456 valid questionnaires were collected, and the recovery rate was 96.77%. Among the 8456 healthcare workers, the prevalence of burnout was 58.0%, that of occupational stress was 31.8%, and that of depressive symptoms was 31.0%. Among those with depressive symptoms and occupational stress, the proportions of burnout were 86.7% and 83.7%, respectively. According to the stepwise linear regression analysis, depressive symptoms, occupational stress, work experience, drinking, and marital status were all independent influencing factors of burnout. Especially, depressive symptoms, social support, and organization and reward had significant influences on burnout (b'=0.455, −0.183, 0.220, P<0.001). Depressive symptoms showed mediating effects on occupational stress (and its subscales) and burnout, and the contribution rates of the mediating effects were 41.00%, 47.02%, 43.44%, 56.62%, and 59.45%, respectively. Conclusion Burnout is a prominent problem among healthcare workers in the 5 provinces, with the prevalence of 58.0%. And nearly 1/3 suffering from depressive symptoms and occupational stress, which has a great impact on burnout.
ABSTRACT
Background Prolonged awkward postures during occupational activities can lead to excessive musculoskeletal load on the wrist of workers and symptoms such as wrist pain or discomfort. Objective To survey the prevalence of wrist pain among workers in 10 key industries and analyze its correlation with wrist working postures. Methods By using stratified cluster sampling method, workers from 10 key industries, such as footwear manufacturing industry, shipbuilding manufacturing industry, and automobile manufacturing industry, were selected from seven regions in North China, East China, Central China, South China, Southwest China, Northwest China, and Northeast China. The demographic information, wrist working postures, pain in wrist of the workers were collected through a cross-sectional survey. Pearson χ2 test was used to compare prevalence by selected factors, trend χ2 test for between group comparison, and unconditional logistic regression models for the association of wrist working postures with wrist pain. Results There were 64052 workers enrolled in this survey, and 56286 provided valid questionnaires (the effective rate was 87.8%). According to the survey, the prevalence of wrist pain was 23.3% (13112/56286), and the industries with higher prevalences were footwear manufacturing (27.1%, 1927/7106), automobile manufacturing (24.9%, 5378/21560), and shipbuilding and related equipment manufacturing (24.4%, 850/3488) industries. Finger pinching (OR=2.09, 95%CI: 1.95-2.24), frequent wrist bending (OR=2.03, 95%CI: 1.92-2.15), fixed wrist bending (OR=1.77, 95%CI: 1.69-1.85), wrist on hard edge (OR=1.34, 95%CI: 1.28-1.40), and arms over shoulders (OR=1.11, 95%CI: 1.05-1.17) increased the risk of reporting wrist pain. Conclusion Awkward postures are related to wrist pain among workers in selected 10 key industries. The related factors are wrist on hard edge, frequent wrist bending, finger pinching, fixed wrist bending, and arms over shoulders.
ABSTRACT
Background China's automobile manufacture is a labor-intensive industry, and most of the welding tasks are manual operations. It is often necessary to observe the solder joints during operation, and there are many adverse health outcome-related factors involved in the work process. However, the research on the prevalence and risk factors of work-related musculoskeletal disorders (WMSDs) in the upper back of welders is still insufficient. Objective To explore the prevalence and risk factors of WMSDs in the upper back of welders from an automobile factory. Methods This was a cross-sectional study. A cluster random sampling method was used to select 972 electric welders from an automobile factory as the study subjects. The Musculoskeletal Disorders Questionnaire was used to estimate the prevalence of WMSDs in the upper back in the past year. Results The prevalence rate of WMSDs in the upper back in the welders was 42.2% (410/972). The positive rates of studied occupational risk factors were 72.5% (705/972) for maintaining same posture for a long time, 71.8% (698/972) for bending and twisting for a long time, and 64.7% (629/972) for repetitive trunk movements. The univariate analysis showed that the prevalence rates of WMSDs were significantly different among workers categorized by gender, working age, twisting and/or bending for a long time, working in the same position for a long time, lifting heavy objects in an uncomfortable position, repetitive trunk movements, being unable to exert energy due to discomfort, work involving cold or temperature changes, personnel shortage, no rest between work, working hours per week, and working in an uncomfortable position (P<0.05). The results of multiple logistic regression indicated that female, working in the same position for a long time, working in an uncomfortable position (frequently), lifting heavy objects in an uncomfortable position, and being unable to exert energy due to discomfort were associated with higher risks of reporting WMSDs in the upper back (OR=2.37, 1.46, 1.76, 1.44, and 1.50, respectively, P<0.05); the risk of reporting WMSDs in the upper back increased by 95%, 157%, and 196% for every 10 h increase in weekly working hours (41-50 h, 51-60 h, ≥61 h vs ≤40 h); adequate rest time was associated with a lower risk for WMSDs in the upper back (OR=0.70, 95%CI: 0.49-0.98). Conclusion The prevalence rate of WMSDs in the upper back of welders in the automobile factory is high, and many occupational risk factors are involved. Measures should be taken for intervention and prevention.
ABSTRACT
Objective: To analyze the current status of work-related musculoskeletal disorders (WMSDs), work fatigue and musculoskeletal pain in Chinese occupational population, and to study the relationship between work fatigue and musculoskeletal pain and WMSDs. Methods: A total of 66 961 employees from 323 enterprises in 15 key industries in China were selected as the study subjects using stratified cluster sampling method. The incidence of WMSDs in the past year was investigated using the Chinese version of the Musculoskeletal Disorders Questionnaire, and the work fatigue and musculoskeletal pain were investigated using Borg 6-20 Rating of Perceived Exertion Scale and visual analogue scale. The data were standardized using the age composition data of 18 to 60 years from the seventh national population census. Results: The standardized annual incidence of WMSDs was higher in the front-line workers than that in the administrative and other supportive staff (38.82% vs 36.30%). The detection rates of work fatigue and musculoskeletal pain in the study subjects were 44.54% and 63.08%, respectively. The result of S-curve fitting showed that the risk of WMSDs increased with the level of work fatigue (P<0.01). Among the front-line workers, the average of monthly fatigue frequency in the neck, shoulder, lower back, upper back, wrist/hand, foot and ankle, knee, leg, and elbow were higher in the group with WMSDs compared to those without WMSDs (all P<0.01). The pain degree of musculoskeletal pain was higher in all nine sites in the fatigued group than in the no-fatigue group (all P<0.01). The standardized detection rate of musculoskeletal pain was higher in the fatigued group than in the non-fatigued group (80.38% vs 25.71%). The work fatigue was moderate and positively correlated with musculoskeletal pain in all seven sites except the lower back and elbow, with Kendall Tau-b correlation coefficients ranging from 0.423 to 0.546 (all P<0.01). Conclusion: There is a good correlation between work fatigue and local musculoskeletal pain, work fatigue and WMSDs in Chinese occupational population. Implementing ergonomic interventions to control the development of work fatigue can be an effective measure for preventing WMSDs.
ABSTRACT
Objective: To investigate the influencing factors and population attributable risk percent (PAR%) of low back pain in automobile assemblers. Methods: A total of 634 assemblers from 11 automobile manufacturers in Shiyan City, Hubei Province were chosen as research subjects using judgment sampling method. The prevalence of low back pain in the past one year was investigated using Musculoskeletal Disorders Questionnaire. PAR% was used to analyze the contribution of influencing factors to low back pain. Results: The annual prevalence of low back pain was 68.8%. The results of multivariate logistics regression showed that length of service>15 years, high school or secondary college education or above, standing most of the time, sitting most of the time, the proportion of cumulative time of poor posture in work shift time ≥1/8, and bending for insufficient height of working space were the risk factors for low back pain (all P<0.05). The PAR% of the proportion of cumulative time of poor posture in work shift time ≥1/8 was 43.0%, 37.8% for standing most of the time, and 12.8% for bending for insufficient height of working space. Conclusion: The annual prevalence of low back pain was higher in automobile assemblers. The influencing factors included individual factors and occupational factors. The proportion of cumulative time of poor posture in work shift time ≥1/8, standing most of the time and bending for insufficient height of working space should be taken as the priority intervention factors to reduce the prevalence of low back pain among assemblers in this enterprise.
ABSTRACT
OBJECTIVE: To explore the prevalence of work-related low back musculoskeletal disorders(WMSDs) among electric welders in an automobile factory and to analyze its individual influence factors. METHODS: A total of 754 electric welders with a service length ≥1.0 years from an automobile factory in Shiyan City were selected using judgment sampling method. The Musculoskeletal Disorders Standard Questionnaire was used to collect the information of low back WMSDs. RESULTS: The annual prevalence of low back WMSDs among electric welders was 65.9%(497/754). The prevalence in females was higher than that in males(78.4% vs 63.1%, P<0.01). The prevalence of WMSDs had a rising tendency with age, educational level and service length(P<0.01). The multivariate logistic regression analysis results showed that the risk factors for low back WMSDs were age, gender, and educational level(P<0.05).CONCLUSION: The prevalence of low back WMSDs of electric welders in the automobile factory is high. Gender, age and educational level are the main risk factors affecting low back WMSDs.
ABSTRACT
Objective@#To study the causes and influencing factors of no seeking medical treatment among pneumoconiosis patients.@*Methods@#Using stratified sampling method and typical survey method, we carried out the questionnaire survey in nine provinces in China including the east, the medium and the western region using a questionnaire on the seeking medical behavior pf pneumoconiosis patients and the influencing factors. The subjects include occupational pneumoconiosis cases and clinically diagnosed cases and the response rate is 94.3 percent. The data was entered twice with epidate3.1 and error detection and statistical analysis was completed with SPSS 20.0. Chi-square test was used for univariate analysis, and multivariate logistic regression was used for multivariate analysis.@*Results@#One thousand and thirty-seven subjects were investigated with average age 55.9±11.2 years. Seventy percent of them were silicosis and 21.9 percent were coal worker’s pneumoconiosis with 67.5 percent of them residing permanently in the countryside, and 37.9 percent of their education background were primary school culture and 33.1 percent of them had junior high school culture. Thirty two point six percent of respondents had no personal income with a median monthly income of 1 200 yuan. Four hundred and thirty four of subjects hadn't seek medical treatment since they got the pneumoconiosis accounting for 41.9 percent with three hundred and thirty seven of them hospitalized directly. The reasons of no seeking medical treatment for the respondents mainly include the self-induction symptoms lighter, the high cost of treatment and cannot claiming the payment of the medical expenses, buying drugs in drugstore, thinking that no medicine can cure pneumoconiosis or no effect, complex procedures, too far away from medical institutions, no unaccompanied, needing a long time or no time, communication disorders, etc. accounting for 44.4 percent, 24.6 percent, 10.9 percent, 9.1 percent, 6.9 percent, 4.4percent, 3.2 percent, 2.9 percent, 1.9 percent, 1.5 percent, respectively. The results of multivariate analysis showed the main characteristics of subjects with restrictions to the outpatient health service utilization are as follows: demographic sociological indicators such as registered permanent residence area is western (ORwestern=2.18, 95%CI:1.38-3.43) , more than seventy five years old (ORover 75=6.82, 95%CI:2.04-22.9) , unemployment, temporary or permanent employment (OR unemployment=1.90, 95%CI:1.17-3.08; ORtemporary employment=3.11, 95%CI:1.57-6.14; ORpermanent employment=2.10, 95%CI:1.18-3.74) , self-rated health score of 50 or above (ORself-rated-70=2.04, 95%CI:1.18-3.51; ORself-rated-90=3.00, 95%CI:1.97-5.37; ORself-rated 90=2.95, 95%CI:1.74-8.07) ; with increase to the outpatient health service utilization are breath with difficulty (OR=0.57, 95%CI:0.41-0.78) , emphysema (OR=0.48, 95%CI:0.26-0.90) , hospitalized with pneumo-coniosis (OR=0.12, 95%CI:0.07-0.20) .@*Conclusion@#Pneumoconiosis patients no covered by injury insurance should be orderly included in the basic medical security system, and be given the medical treatment actively; It should be strengthened the health management for the pneumoconiosis patients and correctly guided the utilization of medical services.
ABSTRACT
OBJECTIVE: To investigate the clinical features and treatment methods of occupational acute dimethyl oxalate(DMO) toxic nephropathy. METHODS: Occupational history,clinical manifestation,laboratory examination and therapy of one occupational DMO poisoning case were retrospectively analyzed. RESULTS: The patient was exposed to a large amount of DMO in a short time,with the main symptoms of dizziness,fatigue,nausea,vomiting,bloating,and oliguria.Glomerular filtration reduced after 48 hours of disease onset,serum urea nitrogen was 21. 9 mmol/L and serum creatinine was 788 μmol/L. Renal biopsy showed glomerular mesangial proliferative lesions,tubulointerstitial lesions,small arterial intima thickening and hyaline degeneration. Early treatment,including hemodialysis,hemoperfusion,hormone shock therapy,protection of myocardium,renal function,and improvement of circulation achieved a good clinical prognosis.CONCLUSION: The main clinical manifestation of acute DMO poisoning is acute kidney injury. Blood purification treatment and hormone shock therapy should be used early.
ABSTRACT
OBJECTIVE: To explore the prevalence of neck pain in automobile manufacturing workers and to analyze its influencing factors. METHODS: A total of 1 566 workers with length of service over 1. 0 year from a automobile manufacturing factory were selected by using cluster random sampling method. The Musculoskeletal Disorders Standard Questionnaire was used to investigate the musculoskeletal disorders status of study subjects. The influencing factors that cause neck pain among the automobile manufacturing workers were analyzed. RESULTS: The annual prevalence of neck pain among workers was 57. 4%. The multivariate logistic regression analysis indicated that workers with older age,longer length of service and higher educational level had higher risk of neck pain( P < 0. 05). The female gender,neck forward,prolonged neck twisting,working with uncomfortable postures,driving,special operating conditions,regularly shifting work,and frequent overtime working promote the occurrence of neck pain( P < 0. 05). CONCLUSION: The gender,age,educational level,length of service,neck forward,prolonged neck twisting,working with uncomfortable postures,driving,special operating conditions,regularly shifting work,and frequent overtime working are influencing factors of neck pain.