ABSTRACT
Background Fatigue driving is an important cause of road traffic accidents in modern society, and the fatigue condition of heavy-duty commercial truck drivers has attracted widespread attention. Research on the fatigue status and influencing factors of heavy-duty commercial truck drivers in China is relatively rare at present. Objective To analyze the main characteristics of fatigue among heavy-duty commercial truck drivers and the impacts of factors such as working hours, insomnia, and occupational burnout on their fatigue status. Methods Using cluster sampling method, a cross-sectional study was conducted from July to August 2023, enrolling heavy-duty commercial truck drivers in long-distance freight logistics markets (stations) located in three administrative regions of W City, Xinjiang Uygur Autonomous Region. A self-designed questionnaire was used to collect demographic and occupational characteristics of heavy-duty commercial truck drivers, and the Chinese versions of Fatigue Scale-14 (FS-14), Athens Insomnia Scale (AIS), and Maslach Burnout Inventory General Survey (MBI-GS) were used to evaluate their fatigue, insomnia, and occupational burnout status, respectively. Mann-Whitney U test and Kruskal-Walls H test were used to compare intergroup differences, and Spearman correlation coefficient was used to analyze the correlation between variables. Hierarchical regression models were used to study the impacts of selected variables on fatigue status. Results This study obtained 311 valid questionnaires, with a valid recovery rate of 88.86% (311/350). The physical fatigue, mental fatigue, and total fatigue scores of the survey subjects in M (P25, P75) were 3.00 (2.00, 4.00), 2.00 (1.00, 3.00), and 5.00 (4.00, 6.00), respectively. The comparison results showed that, except for smoking, there were statistically significant differences in total fatigue scores between different groups of age, marital status, number of children, educational level, service length of freight transportation, average daily working time, and average monthly income (P<0.05). The difference in total fatigue score among the groups without sleep disorders, with suspected insomnia, and with insomnia was statistically significant (P<0.001). The difference in total fatigue score among the groups without occupational burnout, with moderate occupational burnout, and with severe occupational burnout was also statistically significant (P<0.001). Positive correlations were found between insomnia score and scores of physical fatigue (rs=0.507), mental fatigue (rs=0.547), and total fatigue (rs=0.618) (P<0.001). Hierarchical regression models revealed that having more children, extended daily working hours, insomnia, and increased scores of decreased personal accomplishment were negative factors affecting the fatigue status of heavy-duty commercial truck drivers (P<0.05), and the final regression equation was: total fatigue score=7.579+0.581×number of children+0.916×average daily working time+0.434×score of AIS+0.754×score of reduced personal accomplishment. Conclusion The fatigue status of heavy-duty commercial truck drivers is not optimistic. An increase in the number of children, extended daily working hours, severe insomnia symptoms, and increased scores of decreased personal accomplishment associate with their worse fatigue status.
ABSTRACT
TGR5 is a bile acid-activated G protein-coupled receptor and plays an important role in the physiological and pathological processes of the biliary system. This article describes the normal expression of TGR5 in the liver and bile duct under normal physiological conditions and its functions including the regulation of bile acid secretion and metabolism and cytoprotection. This article also summarizes the changes in the expression and function of TGR5 under pathophysiological conditions and the mechanism of TGR5 in affecting the development and progression of biliary tract diseases through inflammatory response and cell proliferation and apoptosis. TGR5 may be a potential target for the treatment of biliary tract diseases in the future.
ABSTRACT
Clinical studies had demonstrated that early diagnosis of lesion could significantly reduce the risk of cancer. Magneto-acoustic-electrical tomography (MAET) is expected to become a new detection method due to its advantages of high resolution and high contrast. Based on thinking of modular design, a low-cost, digital magneto-acoustic conductivity detection system was designed and implemented in this study. The theory of MAET using chirp continuous wave excitation was introduced. The results of homogeneous phantom experiment with 0.5% NaCl clearly showed that the conductivity curve of homogeneous phantom was highly consistent with the actual physical size, which indicated that the chirp excitation theory in our proposed system was correct and feasible. Besides, the resolution obtained by 1 000 μs sweep time was better than that obtained by 500 μs and 1 500 μs, which means that sweep time is an important factor affecting the detection resolution of the conductivity. The same result was obtained in the experiments carried out on homogeneous phantoms with different concentrations of NaCl, which demonstrated the repeatability of our proposed MAET system.
ABSTRACT
Objective Analyzed from row stone soup combined tan solo symplectic auxiliary row stone calculi in patients with ureteral Duan Jieshi under net rate and the influence of renal colic, so as to provide the basis for clinical treatment.Methods 90 patients with ureteral Duan Jieshi under in our hospital from January 2014 to February 2016 were selected, urology clinic of according to random, the principle of equal distribution is divided into group A (from row stone soup combined tan solo symplectic group) and group B (pure tan solo symplectic group), group C (pure traditional Chinese medicine medicinal broth group), 30 cases in each group.Observe and record the bladder irritation, frequent urination urgency), ureteral colic, discharge time, stones row net rate and incidence of adverse reactions after the comparison.Results In group A discharge time and stones row net both significantly better than B and C groups, the difference was statistically significant (P<0.05); the discharge time and stones row net between group B and C was no statistically significant difference.Group C on frequent urination urgency and ureteral colic happens to have more of A and B groups, the difference was statistically significant ( P <0.05 ); there was no statistically significant difference between group A and B.Adverse reaction of three groups of appeared in the process of treatment: group A in one case of mild diarrhea and one case of mild dizziness , group B in one case of mild headache and one case of mild dizziness, group C not present any adverse reaction, there were no significant differences in the incidence of adverse reactions among the three groups.Conclusion From row stone soup with tan solo symplectic auxiliary platoon stone therapy has good effect for patients with ureteral Duan Jieshi under, can give full play to the acetanilide spasmolysis effect of western medicine, also can better exert TCM row Shi Tong drench, analgesic anti-inflammatory, clear the role of the hot and humid, can improve the stone free rate, relieve patients with renal colic.
ABSTRACT
Objective To evaluate the value of acoustic radiation force impulse (ARFI) elastography in assessment of nonalcoholic fatty liver disease (NAFLD) and hepatic fibrosis in rats.Methods Models with various degrees of NAFLD severity were conducted in 110 rats by feeding high fat emulsion.The right liver lobe of rat models were processed and embedded in a fabricated gelatin solution to measure the shear wave velocity (SWV) by ARFI.And the other liver lobes were used for histologic assessment.Based on NAFLD activity score (NAS),the final pathologic NAFLD diagnosis were considered as normal group (NAS=0),simple steatosis (SS) group (1≤NAS≤2),borderline (3≤NAS≤4) group and nonalcoholic steatohepatitis (NASH) group (NAS≥5).The diagnostic accuracy of the SWV parameters in evaluating NAFLD severity and fibrosis stages was studied using ROC curves.Results The difference of SWV values among normal group,SS group,borderline group and NASH group was statistically significant (F=31.53,P<0.001).Taking SWV≥ 2.54 m/s as the diagnostic standard to differentiate normal rats from rats with SS,and SWV≥2.90 m/s to differentiate SS from NASH in rats,the area under ROC curve (AUC) was 0.922 (95%CI [0.871,0.973],P<0.001) and 0.882 (95% CI [0.807,0.956],P<0.001) respectively.The sensitivity and specificity were 93.5 % and 100 % for differentiating normal and SS groups,83.3 % and 84.2 % for differentiating SS and NASH groups.Taking SWV≥3.48 m/s as cutoff to predict fibrosis (≥F2 stage),the AUC was 0.963 (95%CI [0.909,1.000],P<0.001),the sensitivity was 92.9% and the specificity was 97.6%.Taking SWV≥3.61 m/s as cutoff to predict severe fibrosis (≥F3 stage),the AUC was 0.997 (95%CI [0.990,1.000],P<0.001),sensitivity was 100% and specificity was 98.9%.The same high validity was maintained as in the prediction of cirrhosis (F4 stage) with the cutoff as SWV≥4.50 m/s,and the AUC was 0.993 (95%CI [0.982,1.000],P<0.001),the sensitivity was 100 % and the specificity was 96.8%.Conclusion ARFI elastography is a promising method for differentiating the different severity of NAFLD and staging the degree of hepatic fibrosis with NAFLD in rat models.
ABSTRACT
Objective To investigate the effect of estrogen on the fibrosis process of intrauterine adhesions and the expression of forkhead box F2 (FoxF2).Methods Primary human endometrial stromal cells (HESCs) were obtained by separation with 0.2% collagenase Ⅰ digestion-mesh filtration-differential adherence,and identified by immunocytochemistry.HESCs affected with 10ng/ml transforming growth factor β1 (TGF-β1) for 48 hours.HESCs in model group were affected with 0,10-6,10-8,10-10 and 10-12mol/L estrogen,the expressions of smooth muscle actin alpha (α-SMA),Collagen I (COL Ⅰ) and FoxF2 were detected by quantitative PCR (qPCR) and Western blotting.Results HESCs with high purity and good activity were obtained by using 0.2% collagenase Ⅰ digestion-mesh filtration-differential adherence separation method.Immunocytochemistry showed positive vimentin and negative cytokeratin 18 in HESCs.The results of qPCR and Western blotting showed that the mRNA and protein expression levels of α-SMA,COL Ⅰ and FoxF2 were higher in model group than in control group (P<0.05),the model was built successfully.qPCR revealed that the mRNA expression levels ofα-SMA,COL Ⅰ and FoxF2 were significantly lower in 10-6,10-8 and 10-10mol/L estrogen groups than in model group (P>0.05 in 10-10mol/L estrogen group,P<0.05 in other groups),while in 10-12mol/L estradiol group,the expression levels of FoxF2 mRNA significantly decreased (P<0.05),and of α-SMA and COL Ⅰ mRNA increased,but no significant difference were found (P>0.05).Compared with the model group,the protein expression levels of α-SMA,COL Ⅰ and FoxF2 in 10-6,10-8 and 10 10mol/L estrogen groups decreased,but no significant difference was found (P<0.05),while in 10-12mol/L estradiol group,the expression levels ofα-SMA protein increased (P>0.05),and of COL Ⅰ and FoxF2 proteins decreased (P<0.05).Conclusions The expression of FoxF2 in intrauterine adhesions is increased.Estrogen can reverse the fibrosis process of intrauterine adhesions in a certain range and inhibit the expression of FoxF2.
ABSTRACT
Through the study of the pathology of sleep apnea-hypopnea syndrome, evaluation indexes, diagnosis requirements and so on, a portable sleep monitoring system was designed, which had the characteristics of convenience, wireless transmission and no disturbance. The system can be assessed by respiration monitoring and pulse oximetry, which is based on the pressure variation in miniature air-bag and spectral absorption method. It provides the value of the apnea-hypopnea index (AHI), which is used to evaluate OSAHS severity. The experiment of the system's stability and accuracy is done, which exhibits good performance, it can diagnose OSAHS effectively and provide convenience for home monitoring.
Subject(s)
Humans , Oximetry , Polysomnography , Sleep Apnea, Obstructive , DiagnosisABSTRACT
Through various common domestic and foreign electronic sphygmomanometers to test blood pressure, we find that when measuring high blood pressure or low blood pressure, there is a mismatch between the maximum inflation pressure and the blood pressure measurement, which often results in repeatedly inflating and deflating as well as the problem of high inflation pressure. In order to solve these problems and find a suitable maximum inflation pressure, two intelligent pneumatic solutions based on identifying of pulse wave are suggested and 700 groups of blood pressure experiments are done, then the two solutions are verified by experiments. The experiment proved that these solutions proposed have good stability and accuracy, they can solve the problems appeared in measuring blood pressure effectively, at the same time, the second solution that estimate the maximum inflation pressure during inflation is considered as the best one.
Subject(s)
Humans , Blood Pressure , Blood Pressure Determination , Heart Rate , Hypertension , SphygmomanometersABSTRACT
Developing an acoustic radiation force excitation module including 64 channels based in FPGA for ultrasound elastography. The circuit of the module was derived in bipolar, and the parameters such as excitation frequency, pulse repetition frequency, pulse number, element number and focus depth were adjustable. The acoustic field for special parameter was experimented with OptiSon laser acoustic field system with a result which reflects the width of focal spot is about 3 mm. The acoustic power was experimented with RFB2000 radiation force balance with a result which reflects acoustic power is increasing linearly with the number of pulses and the number of elements, and is increasing squarely with the peak-to-peak value of excitation voltage. The module is promising in factual application which can be triggered externally in synchronously, and can be combined with B-mode ultrasound system for ultrasound elastography.
Subject(s)
Acoustics , Elasticity Imaging Techniques , UltrasonicsABSTRACT
Based on LCD Module and Visual C++ development environment, this paper proposes a new method which can quickly develop the human-machine interface .We define a LCD module programming interface by designing Serial Communication Class(SCS). On this basis,we achieve the transplantation on an Embedded ARM Platform to fulfil the requirements of Medical Diagnostic Instruments (MDI). Experimental results show that this method has advantages of short development cycle and high level transplantation which has broad application prospects in the field of Medical Diagnosis Instrument.
Subject(s)
Diagnosis, Computer-Assisted , Equipment Design , Liquid Crystals , Robotics , Methods , Software , User-Computer InterfaceABSTRACT
The dynamic behaviour of a microbubble confined within a rigid micro-tube was studied using finite element method. The results indicated that the microbubble oscillation was limited when constrained within the micro-tube. Both the expansion ratio of its effective radius and natural frequency decreased with the decrease of the tube radius. Meanwhile, the deformation of the microbubble was non-spherical and became more significant when the ultrasound pressure amplitude increased. The dynamic behaviour in micro-tube was different from that in infinite liquid.
Subject(s)
Blood Vessels , Physiology , Contrast Media , Finite Element Analysis , Microbubbles , Microtubules , Molecular Dynamics SimulationABSTRACT
The article introduces the clinical testing method for the product of patient monitor, the definition of direct measurement and indirect measurement method, and the different testing methods. The clinical testing methods for none invasive blood pressure, pulse oxygen saturation and ECG analysis have significant value, which are important solutions to test the safety and effectiveness of medical devices by using the equivalent analysis method. These methods above are also provided as reference for other medical devices' clinical testing.
Subject(s)
Humans , Equipment Failure Analysis , Equipment Safety , Equipment and Supplies , Reference StandardsABSTRACT
Water-fat separation is a particularly important problem for magnetic resonance imaging. Although many methods have been proposed, the reliability is still challenging. In this work, we have presented a method based on the combination of the branch-cut method and multigrid algorithm to get a more robust performance of water-fat separation. First, the branch-cut method is applied to identify residues, which violates the requirement that the interacting phase gradient around a closed path be zero. Residues and branches are marked to be zeros and filled to the weighting factor array. Then, the unwrapped phase array can be given by the multigrid algorithm. Finally, the Dixon method for water-fat separation is applied to the unwrapped phase array. Experiments for brain scanning on the 0.3T low field MRI system demonstrate the successful application of the proposed method.
ABSTRACT
Segmentation is a precondition step for modeling and analysis of the cochlea. In this paper, an interactive segmentation approach with a combination of 3D (three-dimensional) narrow-band level set algorithm and visualization technology was adopted to separate the cochlea. The 3D narrow-band level set algorithm was used to separate the objective of interest from volume data, and the visualization technology was used to display the segmented result. Users could modify intermediate parameters based on the direct 3D visual feedback until getting satisfying result. The basic principle and characteristics of level set and narrow-band level set algorithms were described in detail. The 3D narrow-band level set algorithm was successfully used to separate the cochlea from spiral CT images of the temporal bone. The experimental results show that the interactive method combining the narrow-band level set algorithm with visualization technique is capable of segmenting the cochlea from the medical volume data. Compared with the method of segmenting object from image volume slice by slice, our method can save much time.
Subject(s)
Humans , Algorithms , Cochlea , Diagnostic Imaging , Computer Graphics , Image Enhancement , Methods , Image Processing, Computer-Assisted , Methods , Imaging, Three-Dimensional , Tomography, X-Ray ComputedABSTRACT
Image guided surgical navigation system is the most advanced surgical apparatus, which develops most rapidly and has great application prospects in neurosurgery, orthopaedics, E.N.T. department etc. In current surgical navigation systems, windowing, segmenting and registration of medical images all depend on manual operation, and automation of image processing is urgently needed. This paper proposes the algorithm which realizes very well automatic windowing and segmentation of medical images: first, we analyze a lot of MRI and CT images and propose corresponding windowing algorithm according to their common features of intensity distribution. Experiments show that the effects of windowing of most MRI and CT images are optimized. Second, we propose the seed growing algorithm based on intensity connectivity,which can segment tumor and its boundary exactly by simply clicking the mouse, and control dynamically the results in real time. If computer memory permits, the algorithm can segment 3D images directly. Tests show that this function is able to shorten the time of surgical planning, lower the complexity, and improve the efficiency in navigation surgery.
Subject(s)
Humans , Algorithms , Brain Diseases , Diagnosis , General Surgery , Image Enhancement , Methods , Image Interpretation, Computer-Assisted , Methods , Image Processing, Computer-Assisted , Imaging, Three-Dimensional , Magnetic Resonance Imaging , Neurosurgical Procedures , Surgery, Computer-Assisted , Methods , Tomography, X-Ray ComputedABSTRACT
Based on a discussion on PACS and the way its image workstation obtains scanned sequential images, this paper presented a method of 3D surface construction and visualization on PACS workstation. Guest/Server structure was used between PACS application entities. Image storing and transmission were realized by service classes established by DICOM standards. Relation database was used to arrange the stored sequential images. Image workstation transformed the sequential images obtained from PACS net into volume data field. 3D reconstruction and rendering results were obtained by using surface-rendering and volume-rendering methods, which made the 3D construction results acquire vivid 3D structure details of high fidelity and strong sense of reality. 3 sets of application results were also presented in this paper.