ABSTRACT
Curcumin( Cur) is a natural active substance extracted from the roots or tubers of traditional Chinese medicinal materials. It has anti-inflammatory and anti-tumor activities on brain diseases. Due to the poor stability,low solubility,poor absorption and low bioavailability of curcumin,N-acetyl-L-cysteine( NAC) was used as an absorption enhancer and mixed with curcumin to improve the absorption of curcumin in the body. In this paper,curcumin was smashed by airflow pulverization,and Cur-NAC mixtures were prepared by being grinded with liquid. Then,the raw material and the product were analyzed by differential scanning calorimetry( DSC),X-ray diffraction( XRD) for structural characterization. The dissolution was determined by high performance liquid chromatography( HPLC) analysis. The characteristic peaks of the samples prepared by grinding method were similar to those of the raw materials,while the melting temperature and the accumulated dissolution degree were not significantly changed. The crystal forms of the products were not changed,and no new crystal form was formed after grinding. After the administration of intranasal powder,blood samples were collected from the orbit,while the whole brain tissues were removed from the skull and dissected into 10 anatomical regions. The concentrations of curcumin in these samples were determined by UPLC-MS/MS. The concentrations of curcumin in plasma and brain were compared at different time points. After intranasal administration of two drugs,it was found that the concentration of curcumin after sniffing up the mixtures in plasma was high,and the concentration of the drug in the olfactory bulb,hippocampus,and pons was increased significantly. Within 0. 083-0. 5 h,the olfactory bulb,piriform lobe and hippocampus remained high concentrations,the endodermis,striatum,hypothalamus and midbrain reached high concentrations within 1-3 h; and the cerebellum,pons and brain extension maintained relatively high concentrations within 3-7 h. The experiment showed that nasal administration of Cur-NAC mixtures can significantly improve the bioavailability of curcumin,and lead to significant differences in brain tissue distribution.
Subject(s)
Animals , Rats , Acetylcysteine , Pharmacology , Administration, Intranasal , Biological Availability , Brain , Brain Chemistry , Chromatography, Liquid , Curcumin , Pharmacokinetics , Tandem Mass Spectrometry , Tissue DistributionABSTRACT
To investigate the feasibility of vapor permeation membrane technology in separating essential oil from oil-water extract by taking the Forsythia suspensa as an example. The polydimethylsiloxane/polyvinylidene fluoride (PDMS/PVDF) composite flat membrane and a polyvinylidene fluoride (PVDF) flat membrane was collected as the membrane material respectively. Two kinds of membrane osmotic liquids were collected by self-made vapor permeation device. The yield of essential oil separated and enriched from two kinds of membrane materials was calculated, and the microscopic changes of membrane materials were analyzed and compared. Meanwhile, gas chromatography-mass spectrometry (GC-MS) was used to compare and analyze the differences in chemical compositions of essential oil between traditional steam distillation, PVDF membrane enriched method and PDMS/PVDF membrane enriched method. The results showed that the yield of essential oil enriched by PVDF membrane was significantly higher than that of PDMS/PVDF membrane, and the GC-MS spectrum showed that the content of main compositions was higher than that of PDMS/PVDF membrane; The GC-MS spectra showed that the components of essential oil enriched by PVDF membrane were basically the same as those obtained by traditional steam distillation. The above results showed that vapor permeation membrane separation technology shall be feasible for the separation of Forsythia essential oil-bearing water body, and PVDF membrane was more suitable for separation and enrichment of Forsythia essential oil than PDMS/PVDF membrane.
ABSTRACT
PLA-α-asarone nanoparticles were prepared by using organic solvent evaporation method, and their in vivo distribution and brain targeting after intranasal administration were studied as compared with intravenous administration. The results showed that brain targeting coefficient of PLA-α-asarone nanoparticles after intranasal and intravenous administration was 1.65 and 1.16 respectively. The absolute bioavailability, brain-targeting efficiency and the percentage of nasal-brain delivery of PLA-α-asarone nanoparticles were 74.2%, 142.24 and 29.83%, respectively after intranasal administration. The results of fluorescence labeling showed that the fluorescent intensity of coumarin-6 in the brain tissue was the highest after intranasal administration of PLA-α-asarone fluorescent nanoparticles, achieving the purpose of brain-targeted drug delivery. The fluorescent intensity of coumarin-6 in liver tissue after intravenous administration of PLA-α-asarone nanoparticles was much higher than that after intranasal administration, indicating that intranasal administration of PLA-α-asarone nanoparticles could decrease drug-induced hepatotoxicity. In addition, the fluorescent intensity of coumarin-6 in lung tissue was weaker after intranasal administration, which solved the shortcomings of intranasal administration of α-asarone dry powder prepared by airflow pulverization method. In vivo studies indicated that PLA-α-asarone nanoparticles after intranasal administration had a stronger brain targeting as compared with intravenous administration.
ABSTRACT
In order to explore the adsorption characteristics of proteins on the membrane surface and the effect of protein solution environment on the permeation behavior of berberine, berberine and proteins were used as the research object to prepare simulated solution. Low field NMR, static adsorption experiment and membrane separation experiment were used to study the interaction between the proteins and ceramic membrane or between the proteins and berberine. The static adsorption capacity of proteins, membrane relative flux, rejection rate of proteins, transmittance rate of berberine and the adsorption rate of proteins and berberine were used as the evaluation index. Meanwhile, the membrane resistance distribution, the particle size distribution and the scanning electron microscope (SEM) were determined to investigate the adsorption characteristics of proteins on ceramic membrane and the effect on membrane separation process of berberine. The results showed that the ceramic membrane could adsorb the proteins and the adsorption model was consistent with Langmuir adsorption model. In simulating the membrane separation process, proteins were the main factor to cause membrane fouling. However, when the concentration of proteins was 1 g•L⁻¹, the proteins had no significant effect on membrane separation process of berberine.
ABSTRACT
Tetradrine-tashionone II(A)-PLGA composite microspheres were prepared by the SPG membrane emulsification method, and the characterization of tetradrine-tashionone II(A) -PLGA composite microspheres were studied in this experiment. The results of IR, DSC and XRD showed that teradrine and tashionone II(A) in composite microspheres were highly dispersed in the PLGA with amorphous form. The results of tetradrine-tashionone II(A) -PLGA composite microspheres in vitro release experiment showed that the cumulative release amounts of tetradrine and tashionone II(A) were 6.44% and 3.60% in 24 h, and the cumulative release amounts of tetradrine and tashionone II(A) were 89.02% and 21.24% in 17 d. The process of drug in vitro release accorded with the model of Riger-Peppas. Tetradrine-tashionone II(A) -PLGA composite microspheres had slow-release effect, and it could significantly reduce the burst release, prolong the therapeutic time, decrease the dosage of drugs and provide a new idea and method to prepare traditional Chinese medicine compound.
Subject(s)
Benzofurans , Chemistry , Benzylisoquinolines , Chemistry , Drug Carriers , Chemistry , Drug Compounding , Methods , Drugs, Chinese Herbal , Chemistry , Kinetics , Lactic Acid , Chemistry , Microspheres , Particle Size , Polyglycolic Acid , ChemistryABSTRACT
To study the pharmacokinetic characteristics and absolute bioavailability of α-asarone through dry powder inhalation in rats, and compare with that through oral administration and intravenous injection. A HPLC method was established for the determination of α-asarone in rat plasma to detect the changes in plasma concentrations of α-asarone through dry powder inhalation (20 mg · kg(-1)), oral administration (80 mg · kg(-1)) and intravenous injection (20 mg · kg(-1)) in rats. DAS 2.0 software was used to calculate the pharmacokinetic parameters. The absolute bioavailability of α-asarone was calculated according to AUC(0-t)) of administration routes and administration doses. According to the results, α-asarone showed good linear relations (r = 0. 999 4) at concentrations between 0.282-14.1 mg · L(-1), with the limit of detection (LOD) at 0.212 mg · L(-1). Through dry powder inhalation, oral administration and intravenous injection of α-asarone, the metabolic processes of α-asarone in rats conformed to one, two and three compartment models respectively, with the elimination half-life of (95.48 ± 48.28), (64.34 ± 27.59), (66.99 ± 29.76) min. According to the bioavailability formula, the absolute bioavailability of α-asarone through dry powder inhalation and oral administration were 78.32% and 33. 60%, respectively. This study showed that significant increase in elimination half-life and absolute bioavailability of α-asarone through dry powder inhalation, which lays a theoretical foundation for preparing α-asarone dry powder inhalers.
Subject(s)
Animals , Male , Rats , Administration, Inhalation , Anisoles , Blood , Pharmacokinetics , Biological Availability , Drugs, Chinese Herbal , Pharmacokinetics , Half-Life , Rats, Sprague-DawleyABSTRACT
To optimize the pretreatment of Huanglian Jiedu decoction before ceramic membranes and verify the effect of different pretreatments in multiple model system existed in Chinese herb aqueous extract. The solution environment of Huanglian Jiedu decoction was adjusted by different pretreatments. The flux of microfiltration, transmittance of the ingredients and removal rate of common polymers were as indicators to study the effect of different solution environment It was found that flocculation had higher stable permeate flux, followed by vacuuming filtration and adjusting pH to 9. The removal rate of common polymers was comparatively high. The removal rate of protein was slightly lower than the simulated solution. The transmittance of index components were higher when adjust pH and flocculation. Membrane blocking resistance was the major factor in membrane fouling. Based on the above indicators, the effect of flocculation was comparatively significant, followed by adjusting pH to 9.
Subject(s)
Ceramics , Chemistry , Drugs, Chinese Herbal , Chemistry , Flocculation , Membranes, Artificial , Polymers , Chemistry , Solutions , Chemistry , Ultrafiltration , MethodsABSTRACT
In this study, solvent evaporation method was used to preparing baicalin ethylcellulose microspheres for intranasal administration. The prepared microspheres were round with certain rough surface. The average drug loading and entrapment efficiency was (33. 31 ± 0. 045)% , (63. 34 ± 0. 11)% , respectively. As the characteristic crystalline peaks of baicalin were observed in the microspheres sample, the result of X-ray diffractometric analysis indicated that the baicalin was present in crystalline form after its entrapment in ethylcellulose matrix. By investigating the thermogram of microspheres sample, it was found that endothermic peak of baicalin was shifted from 211. 8 °C to 244. 2 °C and associated with the first broad endothermic peak of ethylcellulose. This could confirm that baicalin was loaded into ethylcellulose, nor simply physical mixture. The powder flowability test exhibited that the specific energy of microspheres was 3. 57 mJ . g-1 and the pressure drop was 2. 22 mBar when air kept the speed of 2 mm . s-1 through the powder bed with the force was 15 kPa. The consequence of the baicalin in vitro released from microspheres showed that the pure baicalin sample displayed faster (90%) release than microspheres sample (75%) in 7 h. Fitting model for release curve before 7 h, the results showed that the pure baicalin sample and the microsphere sample accorded with first order model (R2 = 0. 990 4) and Riger-Peppas model(R2 = 0. 961 2), respectively. Ex vivo rabbit nasal mucosa permeability experiment revealed that the value of cumulative release rate per unit area of the microsphere sample was 1. 56 times that of the pure baicalin sample. This provided the foundation for the in vivo pharmacokinetic study.
Subject(s)
Animals , Male , Rabbits , Administration, Intranasal , Air Pressure , Cellulose , Chemistry , Drug Compounding , Methods , Flavonoids , Chemistry , Pharmacokinetics , Microspheres , Mucous Membrane , Metabolism , Particle Size , Powders , Solvents , X-Ray DiffractionABSTRACT
This study is to report the influence of conditions in spray drying process on physical and chemical properties and lung inhaling performance of Panax notoginseng Saponins - Tanshinone II A composite particles. According to the physical and chemical properties of the two types of components within the composite particles, three solvent systems were selected including ethanol, ethanol : acetone (9 : 1, v/v) and ethanol : acetone (4 : 1, v/v), and three inlet temperature: 110 degrees C, 120 degrees C, 130 degrees C to prepare seven different composite particle samples; each sample was characterized using laser diffraction, scanning electron microscopy (SEM), dynamic vapour sorption (DVS) and atomic force microscope (AFM), and their aerodynamic behavior was evaluated by a Next Generation Impactor (NGI). The results indicate that under the conditions of using the mixed solvent system of ethanol--acetone volume ratio of 9 : 1, and the inlet temperature of 110 degrees C, the resulting composite particles showed rough surface, with more tanshinone II A distributing in the outer layer, such composite particles have the best lung inhaling performance and the fine particle fraction (FPF) close to 60%. Finally it is concluded that by adjusting the conditions in co-spray drying process, the distribution amount and existence form of tanshinone II A in the outer layer of the particles can be changed so that to enhance lung inhaling performance of the drug composite particles.
Subject(s)
Administration, Inhalation , Desiccation , Abietanes , Chemistry , Drug Compounding , Methods , Dry Powder Inhalers , Methods , Microscopy, Electron, Scanning , Microspheres , Panax notoginseng , Chemistry , Particle Size , Plants, Medicinal , Chemistry , Saponins , Chemistry , Solubility , X-Ray DiffractionABSTRACT
<p><b>OBJECTIVE</b>To prepare panax notoginseng saponins-tanshinone II(A) composite particles for pulmonary delivery, in order to explore a dry powder particle preparation method ensuring synchronized arrival of multiple components of traditional Chinese medicine compounds at absorption sites.</p><p><b>METHOD</b>Panax notoginseng saponins-tanshinone II(A) composite particles were prepared with spray-drying method, and characterized by scanning electron microscopy (SEM), confocal laser scanning microscope (CLSM), X-ray diffraction (XRD), infrared analysis (IR), dry laser particle size analysis, high performance liquid chromatography (HPLC) and the aerodynamic behavior was evaluated by a Next Generation Impactor (NGI).</p><p><b>RESULT</b>The dry powder particles produced had narrow particle size distribution range and good aerodynamic behavior, and could realize synchronized administration of multiple components.</p><p><b>CONCLUSION</b>The spray-drying method is used to combine traditional Chinese medicine components with different physical and chemical properties in the same particle, and product into traditional Chinese medicine compound particles in line with the requirements for pulmonary delivery.</p>
Subject(s)
Absorption , Desiccation , Abietanes , Chemistry , Metabolism , Drug Compounding , Methods , Drug Delivery Systems , Methods , Drugs, Chinese Herbal , Chemistry , Metabolism , Lung , Metabolism , Panax notoginseng , Chemistry , Saponins , ChemistryABSTRACT
This is to report the study of degradation of earthworm extracts prepared by wet superfine grinding in simulated gastrointestinal environment. Enzymatic reactions were terminated by adjusting the solution pH or using membrane bioreactor principle. Earthworm protein concentration change was detected by Bradford method, the degraded state of protein was described with SDS-PAGE technology, and the degraded state of small molecule substances was detected by HPLC. The results showed that earthworm protein degraded completely in artificial gastric juice. High molecular weight protein degraded greatly in artificial intestinal fluid, while low molecular weight protein was not significantly degraded. Small molecular substances degradation did not degrade in artificial gastric juice, while they degraded obviously in artificial intestinal fluid, there is even new small molecule substance appeared. Finally it is concluded that the substance that having therapeutic effects in vivo may be some degraded peptide, amino acid and stable small molecules existed in artificial intestinal fluid.
Subject(s)
Animals , Biodegradation, Environmental , Chromatography, High Pressure Liquid , Electrophoresis, Polyacrylamide Gel , Gastric Juice , Metabolism , Gastrointestinal Tract , Metabolism , Hydrogen-Ion Concentration , Materia Medica , Metabolism , Oligochaeta , Metabolism , Proteins , MetabolismABSTRACT
Objective: To synchronously inhale Chinese materia medica compound using particle as inhalation drug delivery system, notoginseng total saponins-tanshinone composite particle was prepared. Methods: The composite particle of notoginseng total saponins-tanshinone was prepared by solvent deposition method and was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), differential thermal analysis (DTA), particle size analysis, and high-performance liquid chromatography (HPLC). Results: The notoginseng total saponins-tanshinone composite particle was successfully prepared by solvent deposition method, the results of characterization proved that tanshinone was coated on the notoginseng total saponins core particle. Conclusion: The preparation of composite particle provides an effective way for synchronous inhalation of Chinese materia medica compound prescription and technical support for the preparation of compound dry powder inhalations.