ABSTRACT
Objective:To investigate the discomfort of chest wall approach area in patients undergoing endoscopic thyroidectomy by a gasless unilateral axillary approach (GUA), and to analyze its influencing factors. To provide a basis for the development of targeted improvement measures.Methods:A total of 153 patients with GUA from May. 2023 to Aug. 2023 in the Department of Thyroid Surgery, the First Affiliated Hospital of Zhengzhou University were selected as the study subjects. The general information questionnaire was collected one day before operation, the pain scales were assessed one day and three days after operation, and the pain and numbness scales were assessed one month after operation. The t test or χ2 test was used for comparison of baseline data between groups according to different types of variables. The patients were divided into two groups: less than moderate pain group (two postoperative average VAS scores<4) and more than moderate pain group (two postoperative average VAS scores ≥4). Mild numbness group (postoperative VAS score<4) ; Moderate and severe numbness group (postoperative VAS score ≥4). Multivariate binary Logistic regression was performed with pain discomfort and numbness discomfort as dependent variables to find possible influencing factors. Results:A total of 153 valid questionnaires were collected. There were 125 patients in the moderate pain group; There were 28 patients in the moderate and above pain group. There were 94 patients in the mild numbness group. There were 59 patients in the moderate to severe numbness group. Multivariate binary Logistic regression results showed that, exercise habits ( OR=0.07 95% CI=0.006, 0.409), operation duration ( OR=1.026 95% CI=1.001, 1.054), total drainage volume ( OR=1.122 95% CI=1.07, P<0.05), 1.198), and drainage tube indwelling time ( OR=0.012 95% CI=0.0, 0.187) had an impact on the discomfort of the chest wall approach area, and the difference was statistically significant ( P<0.05). Gender, BMI, marital status, education, occupation, handed-side surgery, handed-side axillary surgery, smokess and alcohol history, intraoperative blood loss, and length of hospital stay had no effect on the discomfort of chest wall approach area, and the difference was not statistically significant ( P>0.05) . Conclusion:Exercise habits, operation duration, total drainage volume, and drainage duration are independent predictors of discomfort in GUA patients.
ABSTRACT
Objective To analyze the clinical characteristics of C-TI-RADS 3 thyroid nodules with a diameter greater than 2 cm and explore their correlation with gender,nodule ingredient,contralateral cancer presence,diffuse echo changes,TPOAB and TGAB.Methods A retrospective analysis was made on the clinical and pathological information of 94 patients with thyroid nodules who were admitted to our department from September 2022 to March 2023.All the patients underwent cytological and/or histopathological examinations.The proportions of TBS I category,benign tumors,low-risk tumors,and malignant tumors were calculated.The proportion of TBS type Ⅰ,benign tumors,low-risk tumors,and malignant tumors was quantified.Subsequently,a comparative analysis was conducted among the benign,low-risk,and malignant groups in terms of clinical characteristics including gender distribution,nodule composition,contralateral cancer occurrence,diffuse echo changes presence,as well as TPOAB and TGAB levels.Results Seven cases in TBS I category were excluded.Among the remaining 87 cases with confirmed pathology results for nodules,there were 72 benign cases(38 cytology cases and 34 histology cases),5 low-risk thyroid tumors(2 cytology cases and 3 histology cases),10 malignant cases(8 PTC cases,1 FTC case,and 1 MTC case).There was a significant difference in nodule ingredient(cystic/solid)between different pathological types(x2=10.369,P=0.006).However,no statistical significance was found in terms of gender,diffuse echo changes,contralateral cancer presence,TPOAB or TGAB(P>0.05).Further analysis showed that the proportion of solid component was higher in low-risk tumors than in benign nodules(x2=9.571,P=0.002).No statistical significance was found between malignant nodules and low-risk nodules(x2=2.143,P=0.143),or between malignant nodules and benign nodules(x2=2.165,P=0.141).Conclusion Although TI-RADS 3 nodules are generally considered as potentially benign according to various versions of thyroid imaging reporting and data system,malignant nodules still account for a certain proportion.Attention should be paid to thyroid nodules with a typical ultrasonic signs,such as cystic nodules,thyroid follicular tumors and medullary thyroid carcinoma.Ultrasound guided fine needle aspiration cytopathology is necessary for evaluating benign and malignant nodules.It is necessary to pay attention to unsatisfactory or undiagnosable specimens to improve the accuracy of diagnosis.
ABSTRACT
Objective To investigate the feasibility of an accuracy evaluation method for 3D reconstructed bone model based on 3D reconstruction software Arigin3D Pro.Methods Pig femurs were used as solid models which were scanned by CT and MRI respectively.The scan data were imported into software Arigin3D Pro for 3D model reconstruction by 3 operators with different reconstruction experience (≤1 year,2 to 3 years,and ≥4 years,respectively).Each operator reconstructed the femurs 3 times and in each reconstruction measured the diameter of the femoral head,the length of the femur and the width of the knee joint at the distal end of the femur 3 times respectively using software Geomagic Wrap.The above parameters of the solid models were measured using a vernier caliper.The parameter values of reconstructed models and solid models were compared and the differences were analyzed.Results The measurements by Geomagic Wrap showed deviations between the CT and MRI reconstruction models and the solid models,and the maximum deviation percentages were 1.47% and 1.08%,respectively.The percentages of intra-operater difference ranged from 0.29% to 1.53%;the 3D models reconstructed by operators with different reconstruction experience were not identical.Conclusions It is a feasible accuracy evaluation method to compare key parameters between the 3D bone model reconstructed by software Arigin3D Pro and the real animal bone.The deviations of 3D reconstructed bone model based on CT and MR1 images are acceptable.The accuracy of 3D bone construction is related to the difference in operators.
ABSTRACT
Objective@#To investigate the feasibility of an accuracy evaluation method for 3D reconstructed bone model based on 3D reconstruction software Arigin3D Pro.@*Methods@#Pig femurs were used as solid models which were scanned by CT and MRI respectively. The scan data were imported into software Arigin3D Pro for 3D model reconstruction by 3 operators with different reconstruction experience (≤1 year, 2 to 3 years, and ≥4 years, respectively). Each operator reconstructed the femurs 3 times and in each reconstruction measured the diameter of the femoral head, the length of the femur and the width of the knee joint at the distal end of the femur 3 times respectively using software Geomagic Wrap. The above parameters of the solid models were measured using a vernier caliper. The parameter values of reconstructed models and solid models were compared and the differences were analyzed.@*Results@#The measurements by Geomagic Wrap showed deviations between the CT and MRI reconstruction models and the solid models, and the maximum deviation percentages were 1.47% and 1.08%, respectively. The percentages of intra-operater difference ranged from 0.29% to 1.53%; the 3D models reconstructed by operators with different reconstruction experience were not identical.@*Conclusions@#It is a feasible accuracy evaluation method to compare key parameters between the 3D bone model reconstructed by software Arigin3D Pro and the real animal bone. The deviations of 3D reconstructed bone model based on CT and MRI images are acceptable. The accuracy of 3D bone construction is related to the difference in operators.
ABSTRACT
Objective To evaluate the safety and effectiveness of a curved vertebroplasty (CVP) compared with traditional unipedicular approach vertebroplasty (UVP) in treating osteoporotic vertebral compression fractures (OVCF).Methods This was a retrospective case control study on the clinical data of 77 OVCF patients (12 males,65 females;aged 55-86 years,mean 70.8 years) admitted between July 2013 and December 2016.There were 6 injured vertebrae at T1 10,73 at T11 L2,and 12 at L3 5.The patients were divided into CVP group (36 patients,44 vertebrae) and UVP group (41 patients,47 vertebrae) with no significant difference in baseline clinical variables.Intraoperative and postoperative complications including neurovascular injury were recorded.Operation duration,fluoroscopy frequency,volume of cement per level,cement leakage rate per level treated,cement distribution,and refracture rate were compared between the two groups.Preoperative and postoperative visual analog scale (VAS) and Oswestry disability index (ODI) were compared both within the group and between the groups.Results No severe complications related to puncture were observed.No significant difference was observed for operation duration,fluoroscopy frequency,and cement leakage rate per level treated between the two groups (P > 0.05).Compared with UVP group,CVP group had larger volume of cement per level [(5.0 ± 1.4) ml vs.(4.3 ± 1.6) ml],more uniform cement distribution (none vs.10 cases),and lower refracture rate (0 vs.10%) (P < 0.05).The two groups were followed up for 6-49 months (mean,25.9 months).Significant improvements on the VAS and ODI were noted within each group (P <0.01),but there was no significant difference between the two groups (P > 0.05).Conclusions Both CVP and UVP are safe and effective treatments for OVCF.Compared with UVP,CVP entails more uniform cement distribution and lower refracture rate.