A study of the effect of changes in nasal tip prominence on the sense of anterior prominence of the upper lip / 口腔疾病防治

Objective@#The aim of this study was to investigate the effect of changes in nasal tip protrusion on the sense of upper lip protrusion in different populations and to provide a reference for the improvement of soft tissue beauty.@*Methods @# Informed consent and portrait authorization were obtained from the model. A female model whose face met the criteria was selected, and a 3D model of her was obtained using a 3D stereo camera. Based on the original model, ZBRUSH2019 software was used to simulate changes in nose tip protrusion. Then, 9 segments of facial dynamic rotation videos were produced, and an electronic questionnaire was created through a questionnaire website to evaluate the effect of different nose tip protrusions on perceived upper lip protrusion. Randomly selected orthodontic patients, orthodontics professionals and general adults completed the electronic questionnaire. In the questionnaire, a Visual Analog Scale was used to evaluate the perceived degree of protrusion of the upper lip. The higher the score, the more prominent the upper lip of the model in the image. The questionnaire data were statistically analyzed using a generalized linear mixed model. @*Results @#As the nasal tip position became progressively more retracted, the subjects' upper lip protrusion scores increased. Among male subjects, the results showed that the general population thought that the upper lip protrusion was higher than the patients did when the nasal tip protrusion was +6 mm and +4.5 mm (P = 0.023, P = 0.047). When the nasal tip protrusion was +6 mm, the scores of the general population were higher than those of the orthodontics professionals (P = 0.023). However, when the nasal tip variable was -6 mm, their score was lower than that of the patients (P = 0.003), and there was no significant difference in other retest distances between groups (P>0.05).@*Conclusion @#When the protrusion of the nasal tip decreased, the three groups experienced a visual illusion of upper lip protrusion. When the nasal tip protrusion is too large, the general population perceived the visual illusion of the upper lip protrusion as being more obvious.

Efficacy of repair of bilateral complete cleft lip and nasal deformity by 3dMD face system / 中华医学美学美容杂志

Objective To assess the effectiveness of the Mulliken's method in bilateral complete cleft lip patients with 3dMD system and anthropometric landmarks.Methods Thirty-one infants with bilateral complete cleft lip received treatment in Hospital of Stomatology,Wuhan University between January 2014 and December 2016.Patients underwent primary cheiloplasty and nasoplasty by the same senior surgeon.Periodic review was taken to measure and record the 7 items in the nasolabial area with three-dimensional (3D) images.Results The labial and nasal deformities were restored after primary surgery.The upper lip and nose were corrected and obtained the symmetric shape.The columella was elongated to acquire favorable nasal tip.The arc of nasal fornix was upward.The ridge of the white lipwas continuous and integrated with full vermilion tubercle.Total length of upper lip (Sn-Sto),thickness of the vermilion tubercle (Ls-Sto),protrusion of the nasal tip (Nh) and columellar height (Ch) were markedly improved and there were no significant difference between the observation group and the control group.The significant differences between two groups occurred in values of the nostril width (Nw),which was greater than control group and white lip height (Sn-Ls) and lower than that of control group.Conclusions Mulliken's method during the primary cheiloplasty of the bilateral complete cleft lip shows better results in correction the nasal deformity and the ideal effects are achieved during follow-up.

Three-dimensional analysis of nasolabial soft tissues while smiling using stereophotogrammetry (3dMDTM) / Análisis tridimensional de los tejidos blandos nasolabiales en sonrisa utilizando estereofotogrametría (3dMDTM)

SUMMARY: The nasolabial region is the central esthetic unit of the face and is considered one of the most important determinants of the facial esthetic. The facial morphometry of soft tissues is a very important tool in facial surgery. Advances have been made recently in the capture and analysis of 3D images, which offer great development potential in the diagnosis and treatment of facial deformities. The aim of this study was to characterize the nasolabial region of patient candidates for orthognathic surgery using 3D facial captures. A study was conducted to characterize the width of the nasal base and the nasolabial angle in adult patients through 3D photographs. 30 subjects were included, taking two 3D photos each, one in a resting position and the other smiling. The three-dimensional capture was done with the 3dMDface System. The measurements were taken with the 3dMD Vultus software. The length of the alar base was an average of 34.3 ± 2.6 mm at rest, and 39.1 ± 2.9 mm smiling. The mean of the nasolabial angle was 104.6 ± 9.6° at rest and 105.4 ± 14.3º smiling. Additionally, the distance of the alar base smiling compared to its distance at rest increased an average of 4.83 mm, whereas the nasolabial angle smiling increased an average of 0.8º compared to at rest. In this study, the nasolabial angle did not present any significant changes so that its assessments in the case of facial modifications can be standard; the width of the nasal base is significantly modified with the smile and thus a more intense study of any type of modification in this area is required.

RESUMEN: La región nasolabial es la unidad estética central de la cara y se considera uno de los determinantes más importantes de la estética facial. La morfometría facial en tejidos bandos, es una herramienta de gran importancia en Cirugía Facial. En el último tiempo, se han realizado avances en captura y análisis de imágenes 3D, las cuales ofrecen un gran potencial de desarrollo en el diagnóstico y tratamiento de las deformidades faciales. El objetivo de éste trabajo fue caracterizar mediante capturas faciales 3D la región nasolabial de pacientes candidatos a cirugía ortognática. Se realizó un estudio para caracterizar a través de fotografías tridimensionales de pacientes adultos el ancho de la base nasal y el ángulo nasolabial. Se incluyeron 30 sujetos, tomando 2 fotografías 3D a cada uno, una en posición de reposo y otra en sonrisa. Se realizó la captura tridimensional con la camara facial 3dMDface System. Las mediciones fueron realizadas con el software 3dMD Vultus. La longitud de base alar en reposo, fue en promedio de 34,3 ± 2,6 mm, y de 39,1 ± 2,9 mm, en sonrisa. Por otra parte, la media del ángulo nasolabial en reposo fue de 104,6 ± 9,6° y en sonrisa, de 105,4 ± 14,3º. Por otro lado, la distancia de la base alar en sonrisa respecto a su distancia en reposo, aumentó un promedio de 4,83 mm, mientras que el ángulo nasolabial en sonrisa, aumentó en promedio 0,8º respecto a la posición de reposo. En esta investigación, el ángulo nasolabial no presentó cambios significativos de forma que su valoración frente a modificaciones faciales puede ser estándar; el ancho de base nasal se modifica significativamente con la sonrisa de forma que su estudio debe ser más agudo frente a cualquier tipo de modificación en esta zona.

Comparative study of 3D facial photography with traditional photography / 实用口腔医学杂志

Objective: To investigate the clinical perspectives of 3dMD photography in orthodontics. Methods: 60 patients with skeletal Ⅰ malocclusion (30 males, 30 females, aged 18 to 35 years) were selected. Facial pictures of them were taken by 3dMD photography and traditional photography respectively, photographing time was recorded. Facial measurements' quality data were analyzed by SPSS 16. 0. Results: The photographing time of the 3dMD group and traditional photographic group was(14. 99 ± 1. 34) s and (45. 33 ± 7. 75) s respectively(P＜ 0. 05); there was no significant difference between the 2 groups in the quality scores. Conclusion: The clinical use of 3dMD in patients can save the operation time and can get similar by the use of results traditional radiography.

3D measurements and comparison of facial soft tissue of Chinese Han male and female adults with normal occlusion / 实用口腔医学杂志

Objective:To study 3-dimensional facial soft tissue reference values of Chinese Han nationality adults with normal occlusion and explore the facial morphology differences between men and women.Methods:3dMD images from 30 men and 32 women of Han nationality,aged 18-35 years,with normal occlusion were analyzed and compared between the men and women on 19 linear distances,8 angular measurements and 10 linear distance ratios.Results:Linear distances concerning the width and height of facial and organic contours were larger in men(P<0.05),while the ratio of facial height to width were larger in women(P<0.05);the nasofrontal angle and nasal prominence angle were both smaller(P<0.05) but nasofacial angle were larger(P<0.05) in men than in women.Conclusion:The facial and organic contours are larger in men than in women.Men have wide-elliptical face while women have thin-elliptical one.The nose of men is more prominent than women.

Quantitative evaluation of the facial morphology of a Tolteca figurine from Mexico using geometric morphometric approaches / Evaluación cuantitativa de la morfología facial de una figura Tolteca de México utilizando la morfometría geométrica

Morphometric approaches can be combined with 2D or 3D imaging to quantitatively evaluate craniofacial medical conditions depicted in material culture and to learn more about the culture being studied. A terra-cotta figurine (circa 500 A.D.) from the Tolteca culture of Mexico has previously been qualitatively "diagnosed" with Down syndrome (DS) based on the presence or absence of facial features typically associated with trisomy 21. The purpose of this research is to quantitatively test the hypothesis that the Tolteca figurine exhibits facial features consistent with DS. Landmarks (n = 24) were acquired from sex- and age-matched (5-20 yrs) facial images of DS individuals (n = 32), euploid individuals (n = 32), and the Tolteca figurine. Landmark coordinates were subjected to geometric morphometric analyses, and the results suggest that the Tolteca figurine displays facial morphology consistent with DS.

Con el objetivo de evaluar cuantitativamente las complejas condiciones medicas craneofaciales, se pueden combinar los enfoques morfométricos con imágenes 2D o 3D representadas en la cultura material, para un mayor conocimiento referente al estudio cultural. Una figura de terracota (alrededor del 500 DC) de la cultura Tolteca de México ha sido previamente y cualitativamente "diagnosticada" con Síndrome de Down en base a la presencia o ausencia de rasgos faciales típicamente asociados con trisomía 21. El propósito de esta investigación fue comprobar cuantitativamente la hipótesis de que esta figura de la cultura Tolteca exhibe rasgos faciales consistentes con Síndrome de Down. Se identificaron puntos de referencia similares (n = 24) según sexo y edad (5-20 años) a imágenes faciales de individuos con Síndrome de Down (n = 32), individuos euploides (n = 32) y de la figura Tolteca. Los puntos de referencia fueron sometidos a un análisis morfométrico geométrico, y los resultados sugieren que la morfología facial de la figura Tolteca es consistente con el Síndrome de Down.