ABSTRACT
Abstract To compare the physicochemical composition of 4 MTAs commercially available in Latin America. ProRoot MTA (Dentsply, USA), MTA Angelus (Angelus, Brazil), MTA Flow (Ultradent, USA), and MTA Viarden (Viarden, Mexico) were physically and chemically compared. Scanning electron microscopy (SEM) images were obtained from the MTA powder and the prepared presentations. Energy Dispersive X-Ray Spectroscopy (EDS) analyses were performed by triplicate, to calculate the mass proportion of calcium (Ca), silicon (Si), the Ca/Si proportion among the 4 brands. Thermogravimetric analyses (TGA) were conducted (50ºC-1000ºC), and mass loss and inflection points were calculated for each material. Statistical differences for Ca and Si content were determined by ANOVA (p<0.05). SEM images showed evident differences in the appearance of both the powder and the prepared MTAs among brands. Angelus MTA showed cubic prisms not observed in the other 3 brands. ProRoot MTA and MTA Flow showed similar homogeneous structures. MTA Viarden was the less homogeneous, with random structures (>15um). When comparing the mass proportions of Ca and Si between the 4 powder samples, MTA Viarden showed a significantly lower proportions of both elements when compared with the other brands (p<0.005). TGA análisis showed a similar behavior for ProRoot MTA, MTA Angelus and MTA Flow, with less than 2% mass loss when the 1000C temperature was reached. MTA Viarden showed a mass loss of 9,94% before the 700C, indicating the presence of different content sensible to temperature degradation. The analyzed MTAs demonstrated to vary significantly in their chemical composition and physical characteristics. Clinicians must be aware of the differences between different brands of a same material, and future research should focus on the clinical implications of these differences.
Resumen Comparar la composición fisicoquímica de 4 MTA disponibles comercialmente en América Latina. Se compararon física y químicamente ProRoot MTA (Dentsply, EE. UU.), MTA Angelus (Angelus, Brasil), MTA Flow (Ultradent, EE. UU.) y MTA Viarden (Viarden, México). Se obtuvieron imágenes de microscopía electrónica de barrido (SEM) del polvo de MTA y de las presentaciones preparadas. Los análisis de espectroscopía de dispersión de energía de rayos X (EDS) se realizaron por triplicado para calcular la proporción de masa de calcio (Ca), silicio (Si), la proporción Ca/Si entre las 4 marcas. Se realizaron análisis termogravimétricos (TGA) (50ºC-1000ºC), y se calcularon las pérdidas de masa y los puntos de inflexión para cada material. Las diferencias estadísticas para el contenido de Ca y Si se determinaron mediante ANOVA (p<0,05). Los análisis SEM mostraron diferencias evidentes en la apariencia tanto del polvo como las preparaciones de los MTA, entre las diferentes marcas. MTA Angelus mostró prismas cúbicos no observados en las otras 3 marcas. ProRoot MTA y MTA Flow mostraron estructuras homogéneas similares. MTA Viarden fue el menos homogéneo, con estructuras aleatorias (>15um). Al comparar las proporciones de masa de Ca y Si entre las 4 muestras de polvo, MTA Viarden mostró proporciones significativamente más bajas de ambos elementos en comparación con las otras marcas (p<0,005). El análisis TGA mostró un comportamiento similar para ProRoot MTA, MTA Angelus y MTA Flow, con menos del 2 % de pérdida de masa al alcanzar los 1000 °C de temperatura. El MTA Viarden mostró una pérdida de masa de 9,94% antes de los 700 °C, indicando la presencia de diferentes contenidos sensibles a la degradación por temperatura. Los MTA analizados demostraron diferencias significativas en su composición química y características físicas. Los clínicos deben ser conscientes de las diferencias entre las diferentes marcas de un mismo material, y futuras investigaciones deben enfocarse en las implicaciones clínicas de estas diferencias.
Subject(s)
Microscopy, Electron, Scanning , Ceramics/analysis , Endodontics , Biocompatible MaterialsABSTRACT
Aims: This article present alternatives of bioactive materials use for direct pulp capping in immature teeth and for apexogenesis.Case report: Two case reports with the application of bioactive cementsare presented here: one in a tooth with pulp exposure and another with deep carious lesion, pulp exposure and open apex.Results: In both cases, the treatment was performed in one visit and a favorable clinical and radiographic follow-up was achieved.Conclusion: The use of bioactive materials ledto the formation of a dentin bridge and healing process in the pulp tissue exposure, without the need for conventional endodontic treatment
ABSTRACT
Abstract The aim was to evaluate in vitro cytotoxicity and genotoxicity of Bio-C Repair (BCR), compared to Endosequence BC Root Repair (ERRM), MTA Angelus (MTA-Ang), and MTA Repair HP (MTA-HP). MC3T3 osteoblastic cells were exposed to extracts of the repairing bioceramic cements. After 1, 3, and 7 days, cytotoxicity and genotoxicity were evaluated by MTT and Micronucleus tests, respectively. Cells not exposed to biomaterials were used as a negative control. Data were compared using ANOVA two-way, followed by the Tukey Test (α=5%). MTA-Ang and MTA-HP showed no difference in relation to control regarding cytotoxicity in any experimental times. BCR and ERRM reduced cell viability after 3 and 7 days (p<0.05); however, the reduction caused by BCR was less than that caused by ERRM. Considering the micronucleus formation, all biomaterials caused an increase after 3 and 7 days (p<0.05), being greater for the BCR and ERRM groups. It can be concluded that BCR is non-cytotoxic in osteoblastic cells, as well as MTA-Ang e MTA Repair HP. BCR and ERRM showed greater genotoxicity than others tested biomaterials.
Resumo O objetivo foi avaliar in vitro a citotoxicidade e genotoxicidade do Bio-C Repair (BCR), em comparação com o Endosequence BC Root Repair (ERRM), MTA Angelus (MTA-Ang) e MTA Repair HP (MTA-HP). As células osteoblásticas MC3T3 foram expostas aos extratos dos cimentos biocerâmicos reparadores. Após 1, 3 e 7 dias, a citotoxicidade e a genotoxicidade foram avaliadas pelos testes MTT e Micronúcleo, respectivamente. Células não expostas aos biomateriais foram utilizadas como controle negativo. Os dados foram comparados por ANOVA de dois fatores, seguido do Teste de Tukey (p = 5 %). MTA-Ang e MTA-HP não apresentaram diferença em relação ao controle quanto à citotoxicidade em nenhum dos tempos experimentais. BCR e ERRM reduziram a viabilidade celular após 3 e 7 dias (p < 0,05); no entanto, a redução causada pelo BCR foi menor que aquela causada pelo ERRM. Todos os biomateriais causaram aumento na formação de micronúcleos após 3 e 7 dias (p < 0,05), sendo maior para os grupos BCR e ERRM. O BCR não é citotóxico em células osteoblásticas, assim como cimentos MTA-Ang e MTA Repair HP. BCR e ERRM apresentaram maior genotoxicidade do que outros biomateriais testados.
ABSTRACT
Abstract A continuous search for bioactive materials capable of supporting the replacement of damaged pulp tissue, with effective sealing potential and biocompatibility, has represented the attention of studies over the last decades. This study involves a narrative review of the literature developed by searching representative research in PUBMED/MEDLINE and searches in textbooks associated with the mechanism of action of bioactive materials (calcium hydroxide, mineral trioxide aggregate (MTA), and calcium silicate cements). The reflective analysis of the particularities of the chemical elements of these materials, considering the tissue and antibacterial mechanism of action, allows a better understanding of the characteristics and similarities in their tissue responses. Calcium hydroxide paste remains the antibacterial substance of choice as intracanal dressing for the treatment of root canal system infections. Calcium silicate cements, including MTA, show a favorable biological response with the stimulation of mineralized tissue deposition in sealed areas when in contact with connective tissue. This is due to the similarity between the chemical elements, especially ionic dissociation, the potential stimulation of enzymes in tissues, and the contribution towards an alkaline environment due to the pH of these materials. The behavior of bioactive materials, especially MTA and the new calcium silicate cements in the biological sealing activity, has been shown to be effective. Contemporary endodontics has access to bioactive materials with similar properties, which can stimulate a biological seal in lateral and furcation root perforations, root-end fillings and root fillings, pulp capping, pulpotomy, apexification, and regenerative endodontic procedures, in addition to other clinical conditions.
Resumo Uma busca contínua de materiais bioativos com capacidade de substituir o tecido pulpar danificado, com efetiva capacidade de selamento e biocompatibilidade, tem representado a atenção e foco de muitos estudos ao longo das últimas décadas. Este estudo envolve uma revisão narrativa da literatura desenvolvida por meio de pesquisas representativas encontradas no PUBMED/MEDLINE e pesquisas em livros didáticos associadas ao mecanismo de ação de materiais bioativos (hidróxido de cálcio, agregado de trióxido mineral (MTA) e cimentos de silicato de cálcio). A presente análise reflexiva das particularidades dos elementos químicos destes materiais bioativos, considerando o mecanismo de ação tecidual e antibacteriano, possibilita um melhor entendimento das características e similaridades no comportamento tecidual. A pasta de hidróxido de cálcio continua sendo a substância antibacteriana de escolha como medicação intracanal para o tratamento das infecções do sistema de canais radiculares. Este fato se deve a disponibilidade química de íons cálcio e hidroxila do hidróxido de cálcio aos tecidos, e a inibição enzimática bacteriana. Os cimentos de silicato de cálcio, dentre os quais inclui o MTA, apresentam uma resposta biológica favorável ao estímulo à deposição de tecido mineralizado nas áreas seladas e em contato com tecido conjuntivo. Este fato é decorrente da similaridade entre os elementos químicos, em especial devido a dissociação iônica, ao potencial estímulo de enzimas teciduais, e a contribuição com um meio alcalino decorrente do pH destes materiais. O comportamento dos materiais bioativos, em especial o MTA e os novos cimentos de silicato de cálcio na atividade de selamento biológico mostraram efetivos. A endodontia contemporânea atualmente conta com o potencial de materiais bioativos com propriedades análogas capaz de estimular o selamento biológico em perfurações radiculares laterais e de furca, em obturações radiculares, capeamento pulpar, pulpotomia, apicificação e procedimentos endodônticos regenerativos, além de outras condições clínicas.
ABSTRACT
Abstract Few long-term studies assess the discoloration induced by hydraulic calcium silicate-based cement on dental structures. In addition, as far as we know, no long-term study has assessed the discoloration induced by these cement on composite resin. Objective This in vitro study aimed to assess, during a period of two years, the discoloration potential of different hydraulic calcium silicate-based cements (hCSCs) on the enamel/dentin structure and composite resin restoration. Methodology A total of 40 enamel/dentin discs were obtained from bovine incisors, and 40 composite resin discs (10 mm in diameter × 2 mm thick) were fabricated. A 0.8 mm-deep cavity was made in the center of each disc and filled with the following hCSCs (n=10): Original MTA (Angelus); MTA Repair HP (Angelus); NeoMTA Plus (Avalon); and Biodentine (Septodont). An initial color measurement was performed (T0 - baseline). After 7, 15, 30, 45, 90, 300 days, and two years, new color measurements were performed to determine the color (ΔE00), lightness (ΔL'), chroma (ΔC'), hue differences (ΔH'), and whiteness index (WID). Results For enamel/dentin, the ΔE00 was significant among groups and periods (p<0.05). NeoMTA Plus had the greatest ΔE00. The NeoMTA Plus group had the greatest ΔE00 after two years for composite resin. Significant reduction in lightness was observed for all groups after two years (p<0.05). The most significant WID values were observed after 30 days for Biodentine (enamel/dentin) and MTA Repair HP groups (composite resin) (p<0.05). Conclusions The hCSCs changed the colorimetric behavior of both substrates, leading to greater darkening over time. The Bi2O3 in the Original MTA seems relevant in the short periods of color change assessment.
ABSTRACT
Objective@#To study the clinical efficacy of biological ceramics (iRoot BP Plus ) and mineral trioxide aggregate (MTA) in direct pulp capping of mature permanent teeth, to provide referrence for clinical application.@* Methods @# Seventy-four patients with pulp exposure due to deep caries or reversible pulpitis in 75 mature permanent teeth were selected and were randomly divided into two groups. iRoot BP Plus were used as pulp capping agents in the treatment group and MTA were used as pulp capping agents in the control group respectively. The clinical efficacy and imaging analysis were performed at 1, 3, 6 and 12 months after operation. Treatment success rate of the two groups were calculated, and the influence of various factors including gender, age, tooth position, cavity, number and size of pulp exposure on the efficacy of direct pulp capping were analyzed. @* Results @#Sixty patients with 61 mature permanent teeth were selected. Twelve mouths after treatment, 61 teeth of 60 patents were completely investigated (iRoot group: 31 teeth 30 patients; MTA group: 30 teeth 30 patients). The success rates of the 2 groups were 90.3% (iRoot BP Plus) and 90.0% (MTA), respectively. There was no statistical difference between 2 groups (P>0.05). Statistical analysis also showed that gender, age, tooth position, cavity, number and size of pulp exposure had no significant difference between the two groups (P>0.05). @*Conclusion@# Both iRoot BP Plus and MTA are effective in direct pulp capping of mature permanent teeth with carious pulp exposure, while the operation of iRoot is simple and convenient.
ABSTRACT
Objective@#To analyze and evaluate the clinical application effect of bioceramic material mineral trioxide aggregate and iRoot BP plus on the formation of apical barrier in adult teeth with incomplete apical foramen.@*Methods@#A total of 200 permanent teeth with apical periodontitis whose apical foramen were not closed were randomly divided into two groups, and the apical barrier was prepared with MTA and iRoot BP plus, respectively. The operation time of MTA and iRoot BP plus and effects of different types of apical foramen destruction, lesion range of apical area, the filling of apical area and patients' age on the treatment success rate was analyzed and compared. @*Results@#The operation time of preparing apical barrier in iRoot BP plus group was shorter than that in MTA group, and the difference was statistically significant (P<0.05). However, different types of apical foramen destruction, lesion scope of apical area, filling of apical area and patients' age had no effect on the treatment success rate of the two groups (P>0.05). @*Conclusion@#The clinical effects of MTA and iRoot BP plus in the treatment of apical periodontitis of permanent teeth with unclosed apical foramen are similar, but the operation performance of iRoot BP plus is better.
ABSTRACT
Objective @# To investigate the outcomes of a novel direct pulp capping agent containing platelet-rich fibrin (PRF) and mineral trioxide aggregate (MTA). @*Methods @# A total of 32 New Zealand rabbits were randomly divided into 4 groups, namely, the PRF+MTA group (P+M group), PRF group (P group), MTA group (M group) and blank control group (BC group), with 8 rabbits per group. Dental pulp exposure and direct pulp capping were performed, and complete crown square sealing was performed on 2 mandibular central incisor teeth of each rabbit. Four rabbits from each group were euthanized after each observation period (7 and 28 days). The experimental teeth were subjected to HE staining. Inflammatory cell infiltration, calcified bridge formation and pulp tissue disorganization were observed and graded. @*Results@#Inflammatory cell infiltration: on the 7th day, group P+M and group M were lighter than group BC (P<0.05); on the 28th day, group P+M was lighter than group P and group BC (P<0.05); group P+M and group M did not significantly differ (P>0.05). Calcified bridge formation: on the 7th and 28th days, group P+M was lighter than group P, group M and group BC (P<0.05); on the 28th day, group M was higher than group BC (P<0.05). Under microscope, the calcified bridge contained cellular components and was surrounded by odontoblast-like cells, sharing a structure resembled osteodentin; dentin tubule-like structure could not be observed in calcified bridge, and the calcified bridge resembled certain points of osteodentin. Pulp tissue disorganization: on the 7th day, group P+M and group M were lighter than group BC (P<0.05); on the 28th day, group P+M was lighter than group P and group BC (P<0.05). group P+M and group M did not significantly differ (P>0.05). @*Conclusion @# The combination of PRF and MTA for direct pulp capping provided light inflammatory cell infiltration, stable pulp status and a strong ability of pulp tissue to form calcified bridge, and the calcified bridge resembled certain points of osteodentin.
ABSTRACT
Activated platelets may interact with various types of leukocytes such as monocytes, neutrophils, dendritic cells, and lymphocytes, trigger intercellular signal transduction, and thus lead to thrombosis and synthesis of massive inflammatory mediators. Elevated levels of circulating platelet-leukocyte aggregates have been found in patients with thrombotic or inflammatory diseases. This article reviews the latest research on the formation, function, and detection methods of platelet-leukocyte aggregates and their role in the onset of Kawasaki disease, so as to provide new ideas for studying the pathogenesis of Kawasaki disease.
Subject(s)
Humans , Mucocutaneous Lymph Node Syndrome/etiology , Blood Platelets , Inflammation Mediators , Leukocytes , NeutrophilsABSTRACT
Abstract Objective This study aimed to analyze the effect of irradiation on the push-out bond strength of mineral trioxide aggregate (MTA) and Biodentine to radicular dentin. Methodology A total of 60 extracted mature human teeth with single root canals were categorized into two groups (irradiated and non-irradiated) (n=30). Each group was further divided into two sub-groups based on cements used (Biodentine and MTA). Then, a cumulative radiation dose of 60 Gy was divided into 30 fractions (two Gy for every fraction) and administered for five successive days per week over six weeks. Obturation was then performed using MTA and Biodentine. Afterwards, 1.5 mm thick horizontal sections were procured from the middle one-third of all the specimens and then subjected to push-out bond test. Results were analyzed using one-way analysis of variance with post-hoc Tukey's test. Results The bond strength of Biodentine and MTA to irradiated teeth was lower than non-irradiated teeth. Highest push-out bond strength was observed in non-irradiated specimens filled with Biodentine (p=0), followed by irradiated specimens filled with Biodentine (p=0); non-irradiated specimens filled with MTA (p=0); and irradiated specimens filled with MTA (p=0.9). Conclusion The push-out bond strength of Biodentine and MTA to root canal dentin decreased significantly post irradiation.
ABSTRACT
Background:Post?cardiotomy vasoplegia syndrome (VS) is often linked to an exaggerated inflammatory response to cardiopulmonary bypass (CPB). At the same time, the prognostic role of platelet?leucocyte indices (PLIs) and leucocyte indices (LIs), (platelet?lymphocyte ratio [PLR], systemic immune?inflammation index [SII = platelet neutrophil/lymphocyte], aggregate index of systemic inflammation [AISI = platelet monocyte neutrophil/lymphocyte], and neutrophil?lymphocyte ratio [NLR], systemic inflammation response index [SIRI = monocyte neutrophil/lymphocyte), respectively] has been recently described in diverse inflammatory settings. Methods: The retrospective study was conducted to evaluate the VS predictive performance of PLIs and LIs in 1,045 adult patients undergoing elective cardiac surgery at a tertiary care center. VS was defined by mean blood pressure <60 mmHg, low systemic vascular resistance (SVRI <1,500 dynes.s/cm 5/m2 ), a normal or high CI (>2.5 L/min/m2 ), and a normal or reduced central filling pressure despite high?dose vasopressors. Results: About 205 (19.61%) patients developed VS postoperatively. On univariate analysis, age, diabetes, dialysis?dependent renal failure, preoperative congestive heart failure (CHF), the European System for Cardiac Operative Risk Evaluation (EuroSCORE) II, ejection fraction, NLR, PLR, SII, SIRI, AISI, CPB, and aortic cross clamp (ACC) duration, packed red blood cell (PRBC) transfusion, and time?weighted average blood glucose predicted VS. Subsequent to the multivariate analysis, the predictive performance of EuroSCORE II (OR: 3.236; 95% CI: 2.345–4.468; P < 0.001), CHF (OR: 1.04; 95% CI: 1.02–1.06; P = 0.011), SII (OR: 1.09; 95% CI: 1.02–1.18; P = 0.001), AISI (OR: 1.11; 95% CI: 1.05–1.17; P < 0.001), PRBC (OR: 4.747; 95% CI: 2.443–9.223; P < 0.001), ACC time (OR: 1.003; 95% CI: 1.001–1.005; P = 0.004), and CPB time (OR: 1.016; 95% CI: 1.004–1.028; P = 0.001) remained significant. VS predictive cut?offs of SII and AISI were 1,045 1045×109 /mm3 and 137532×109 /mm3 , respectively. AISI positively correlated with the postoperative vasoactive?inotropic score (R = 0.718), lactate (R = 0.655), mechanical ventilation duration (R = 0.837), and ICU stay (R = 0.757). Conclusions: Preoperative elevated SII and AISI emerged as independent predictors of post?cardiotomy VS.
ABSTRACT
Aim To evaluate the flow, pH and calcium release of white MTA (WMTA), salicylate-based resin root canal sealer (Sealapex; SEAL) and SEAL containing 10 (SE10) or 20% (SE20) (w/w) of MTA. Methodology Flow test was realized according to ISO 6876 specification. The sealers samples (n= 10) were placed in polyethylene tubes and immersed in deionized water. After 24 hours and 7, 14, and 28 days, the water pH was determined with a pH meter, and calcium release was assessed by atomic absorption spectrophotometry. Results SEAL and WMTA showed respectively the highest and lowest flow rate when compared with the other materials (P<0.05). SE20 showed the highest pH value only in 24h and 7 days periods (p<0.05). In 14- and 28-days periods, SEAL showed the lowest pH value (p<0.05), but there are no differences between other groups (p>0.05). In all periods, WMTA and SEAL respectively showed the highest and lowest calcium release (p<0.05). Conclusions SE20 proves to be an association with better flow and handling than WMTA, with satisfactory potential for alkalinization and calcium release.
ABSTRACT
This study aims to report a root perforating internal replacement resorption treated and followed up for ten years. A 19-years female showed in periapical tomography enlargement of the entire length of the root canal of tooth 11. The cone-beam computed tomography (CBCT) showed a hypodense area with jagged edges involving the pulp cavity space and communication with the periodontium. After being accessed and prepared, the canal and its resorption defect were obturated with mineral trioxide aggregate. The cervical third was sealed with glass ionomer, and the tooth was restored with composite resin. Ten years later, the tomography showed intact root canal filling and periapical and periodontal injury absence. The use of repair cement for root canal obturation with perforating internal replacement resorption is an alternative for these cases, being fundamental to have a clinical, radiographic and tomographic follow-up to evaluate the treatment success.
ABSTRACT
Aim: The aim of the study was to compare the sealing ability of Mineral Trioxide Aggregate (MTA) and Retroplast as root end filling materials using the Rhodamine B dye penetration method in vitro. Methodology: Forty freshly extracted human single?rooted teeth were randomly divided into two groups of 20 teeth each, and standard root?end cavities were prepared in all teeth. The cavities were filled with MTA and Retroplast in groups 1 and 2, respectively. The specimens were then stored in 1% Rhodamine B dye for a week, following which the dye penetration with all samples was analysed under a stereomicroscope and scored according to Tronstad’s criteria. The observations were compared with Chi square test at a 0.220 level of significance. Results: 5% of the samples in both the groups showed no significant leakage. The leakage was deeper with the Retroplast group than with the MTA group; however, there was no statistically significant difference between the two groups. Conclusion: Both MTA and Retroplast are similar in their sealing potential as root?end cavity fillings with Retroplast reporting slightly deeper microleakage than MTA within the limits of the present study.
ABSTRACT
Introduction: This case report presents the diagnosis and management of extensive internal root resorption (IRR) in a 17?year?old male patient, with a 9?year?old history of trauma. Method: The affected tooth 21 was associated with vertical root fracture (VRF) and incomplete apex closure with a substantial loss of tooth structure, including dentin and cementum. Encouraged by a healthy periodontal condition, the choice was made to use mineral trioxide aggregate (MTA) to reconstruct and reinforce the resorptive defect and the fractured segment. A composite veneer was placed to enhance the aesthetics. Result: A follow?up of the patient after 2 years revealed healing with a resolution of the lesion. Conclusion: This case report highlights the use of MTA as a lone?standing filling material for the treatment of IRR with VRF in a non?vital immature tooth
ABSTRACT
Abstract An endodontic material must be minimally harmful to stem cells since they are essential, thanks to their capacity for cell proliferation, self-renewal, and differentiation. For this reason, in this in vitro study, the cell viability and the expression of genes involved in cell plasticity and differentiation were investigated in stem cells recovered from human dental pulp (hDPSCs) that were in contact with four endodontic materials (Endofill, MTA, Pulp Canal Sealer, and Sealer 26). The viability of HDPSCs was assessed by MTT and trypan blue exclusion assays. PCR evaluated cellular plasticity by determining the CD34, CD45, Nestin, CD105, Nanog, and OCT4 expressions. The effect on cell differentiation was determined by RT-PCR expression of the RUNX2, ALP, OC/BGLAP, and DMP1 genes. The data were analyzed using ANOVA with Bonferroni correction (p <0.05). Pulp Canal Sealer and Endofill decreased cell viability after 48 hours (p <0.001). MTA and Sealer 26 did not disrupt cell viability (p> 0.05). When cultivated in the presence of MTA and Sealer 26, hDPSCs expressed Nestin, CD105, NANOG, and OCT-4 and did not express CD34 and CD45. MTA and Sealer 26 interfered with DMP1, OC/BGLAP and RUNX2 expressions (p <0.05) but did not change ALP gene expression (p> 0.05). MTA and Sealer 26 showed biological compatibility in the presence of hDPSCs.
Resumo Um material endodôntico deve ser minimamente prejudicial às células-tronco, uma vez que essas células são extremamente importantes, devido à sua capacidade de proliferação, autorrenovação e diferenciação celular. Por esse motivo, a viabilidade celular e a expressão de genes envolvidos na plasticidade e diferenciação celular foram investigadas em células-tronco recuperadas de polpa dentária humana (HDPSCs) que estiveram em contato com quatro materiais endodônticos (Endofill, MTA, Pulp Canal Sealer e Sealer 26). A viabilidade das HDPSCs foi avaliada pelos ensaios MTT e de exclusão de azul de tripano. A plasticidade celular foi avaliada pela determinação das expressões dos genes CD34, CD45, Nestin, CD105, Nanog e OCT4 por PCR. O efeito na diferenciação celular foi determinado pela expressão dos genes RUNX2, ALP, OC/BGLAP e DMP1 por RT-PCR. Os dados foram analisados por ANOVA com correção de Bonferroni (p <0,05). Em comparação com o controle, Pulp Canal Sealer e Endofill diminuíram a viabilidade celular após 48 horas (p <0,001). MTA e Sealer 26 não interromperam a viabilidade celular (p> 0,05). Quando cultivado na presença de MTA e Sealer 26, as HDPSCs expressaram Nestin, CD105, NANOG e OCT-4 e não expressaram CD34 e CD45. MTA e Sealer 26 interferiram nas expressões de DMP1, OC / BGLAP e RUNX2 (p <0,05), mas não alteraram a expressão do gene ALP (p> 0,05). Sendo assim, MTA e Sealer 26 demonstraram compatibilidade biológica na presença de HDPSCs.
ABSTRACT
RESUMEN: El objetivo del estudio experimental in vitro fue evaluar la eficacia antimicrobiana del cemento Portland (CP) comparado con el Mineral Trióxido Agregado (MTA) frente a cepas de Enterococcus faecalis (E. faecalis) y Candida albicans (C. albicans) a las 24, 48 y 72 horas después del sembrado. Para ello se utilizó la técnica de difusión en agar. La capa base fue realizada con el Agar Müller-Hinton en el que se hicieron agujeros de 6 mm de diámetro a fin de contener los cementos de estudio y medir posteriormente la zona de inhibición microbiana alrededor de los materiales mediante un calibrador vernier digital. Se utilizó la prueba T de Student para comparar la diferencia entre el CP y MTA y el análisis de ANOVA para evaluar las diferencias entre los tres tiempos de estudio. Los resultados mostraron que tanto frente a E. faecalis y C. albicans el CP tuvo un mayor halo de inhibición que el MTA, siendo estas diferencias estadísticamente significativas (p0.05). Asimismo, la C. albicans presentó valores mayores de inhibición que el E. faecalis en los dos cementos estudiados. Se concluyó que el CP tuvo mayor eficacia antimicrobiana que el MTA independientemente del tiempo evaluado.
ABSTRACT: The aim of the experimental in vitro study was to evaluate the antimicrobial efficacy of Portland cement (CP) compared with Mineral Trioxide Aggregate (MTA) against Enterococcus faecalis (E. faecalis) and Candida albicans (C. albicans) strains at 24, 48 and 72 hours after sowing. For this, the agar diffusion technique was used. The base layer was made with Müller-Hinton Agar in which 6 mm diameter holes were made in order to contain the study cements and subsequently measure the zone of microbial inhibition around the materials using a digital vernier caliper. The Student's t test was used to compare the difference between CP and MTA and the ANOVA analysis to evaluate the differences between the three study times. The results showed that both against E. faecalis and C. albicans, CP had a greater inhibition than MTA, these differences being statistically significant (p 0.05). Likewise, C. albicans presented higher inhibition values than E. faecalis in the two cements studied. It was concluded that CP had greater antimicrobial efficacy than MTA regardless of the time evaluated.
ABSTRACT
Objective: Present in?vitro study aimed to evaluate the apical leakage of different bioceramic retrofilling materials with and without smear layer. Materials and Methods: Sixty human single?rooted teeth were decoronated at a standardized root length of 13 mm, chemo?mechanically prepared and obturated. After obturation, root?end resection was done and root?end cavities were prepared using ultrasonic tips. The specimens with prepared retro cavities were randomly assigned into 2 groups (n = 30) based on the smear layer removal protocol used. Each group was further subdivided into 3 subgroups (n = 10) based on the bioceramic retrofilling material MTA (Mineral Trioxide Aggregate; Proroot Dentsply/Tulsa), CEM (Calcium?Enriched Mixture; Bionique Dent, Tehran) and ERRM (EndoSequence® Root Repair Material; Brasseler USA, Savannah, GA). The extension of dye (2% Rhodamine B) penetration was measured in millimetre using a stereomicroscope at 10× zoom. Results were statistically analysed using one?way ANOVA (analysis of variance) test and unpaired Student’s t test. Results: In the presence of smear layer, MTA demonstrated maximum mean apical leakage value (1.70 ± 0.30), followed by CEM (1.40 ± 0.37) and ERRM (1.40 ± 0.23), which was statistically not significant. Without the smear layer, ERRM demonstrated the least mean apical leakage value, which was statistically significant as compared with CEM (P <.05) and MTA ( P <.01). Conclusion(s): All bioceramic retrofilling materials demonstrated apical leakage irrespective of the presence or absence of the smear layer. The presence of a smear layer is beneficial for the sealing ab
ABSTRACT
Objective: This study aimed to determine the push-out-bond-strength(PBS) of mineral trioxide aggregate (BIOMTA+) and calcium-enriched-mixture-cement (CEM) in retrograde cavities prepared using Er: YAG laser and stainless-steel bur. Material and Methods: The root canals of 60 extracted single-rooted human teeth were prepared, filled and their apical portion of 3-mm were resected using a diamond bur and randomly divided into four groups according to technique of retrograde preparation and filling material as follows(n=15): Group1: bur/ BIOMTA+ ,Group2: bur/ CEM, Group3: Er:YAG laser/ BIOMTA+, Group4: Er:YAG laser/ CEM. PBS test were performed to specimens and failure modes were evaluated. The data were statistically analyzed with ANOVA, Post-Hoc Tukey and t tests (p< 0.05). Results: CEM was exhibited higher than bond strength compared to BIOMTA+ in retrograde cavity prepared using laser (p= 0.021) and BIOMTA+ in retrograde cavity prepared using bur was exhibited higher than bond strength compared to in retrograde cavities prepared using laser (p= 0.024). Failure modes were dominantly cohesive in all groups tested and one representative specimen each failure mode was examined in SEM and the general characteristics of the failure modes were confirmed. Conclusion: With in the limitations of the present study, when used CEM, Er: YAG laser-assisted retrograde cavity preparation positively affected the bond strength values compared to BIO MTA+. Considering its optimal adhesion, the calcium-enriched-mixture-cement (CEM) might be a good option as a filling material in retrograde cavities in clinical use. (AU)
Objetivo: O objetivo deste estudo foi determinar a força de união (PBS) de cimento de agregado trióxido mineral (BIO MTA+) e cimento enriquecido com cálcio (CEM) em preparos cavitários retrógrados realizados com: Laser Er-YAG e brocas de aço inoxidável. Material e Métodos: Canais radiculares de 60 dentes unirradiculares extraídos foram preparados, preenchidos e 3 mm de suas porções apicais foram ressecadas usando uma broca diamantada e divididos randomicamente em quatro grupos de acordo com a técnica de preparação retrógrada e o material de preenchimento (n=15): Grupo 1: Broca/BIO MTA+, Grupo 2: Broca/CEM, Grupo 3: Laser Er-YAG/BIO MTA+, Grupo 4: Laser Er-YAG/CEM. O teste de PBS foi realizado para as amostras e os modelos de falha foram avaliados. Os dados foram analisados estatisticamente pelos testes de ANOVA, Post-Hoc Tukey e testes t (p< 0.05). Resultados: CEM apresentou maior força de união que BIO MTA+ em cavidades retrógradas preparadas com laser (p= 0.021) e BIO MTA+ em cavidades retrógradas preparadas com brocas apresentou maior força de união quando comparado à cavidades retrógradas preparadas com laser (p= 0.024). Os modelos de falha foram predominantemente coesos em todos os grupos testados e um espécime representativo de cada modelo de falha foi examinado em MEV e as características gerais dos modelos de falha foram confirmadas. Conclusão: Com as limitações do presente estudo, quando usou-se CEM, o preparo de cavidades retrógradas através de Laser Er-YAG afetou positivamente os valores da força de união quando comparados com BIO MTA+. Considerando sua ótima adesão, o cimento enriquecido com cálcio (CEM) pode ser uma boa opção como um material de preenchimento em cavidades retrógradas no uso clínico.
Subject(s)
Dental Cements , Dental Pulp Cavity , Lasers, Solid-StateABSTRACT
【Objective】 To explore the feasibility of tirofiban, a platelet surface glycoprotein (GP)Ⅱb/Ⅲa receptor antagonist intervene in transfusion-related acute lung injury (TRALI), by inhibiting platelet activation and by preventing platelet and neutrophil binding to form aggregates. 【Methods】 1) Fifty wild-type male Balb/c mice, aged 8 to 10 weeks, were randomly divided into TRALI, normal, tirofiban TRALI intervention, isotype control and tirofiban normal intervention groups. In the TRALI model, tirofiban TRALI intervention and isotype control groups, each mouse was injected intraperitoneally with lipopolysaccharide (LPS) 0.1 mg/kg, and after 18 h with 4.5 mg/kg anti-MHC-I or IgG2a isotype control antibody, in which 0.5 μg/g tirofiban was injected 30 min before anti-MHC-I injection, and was labeled as tirofiban TRALI intervention. The group without any treatment was set as normal group. The tirofiban normal intervention group was injected with only 0.5 μg/g tirofiban into the tail vein, 30 min before the injection of anti-MHC-I. 2) After antibody injection, the mice were observed for 2 h, then executed with their lungs removed, and the extent of lung injury and the intervention effect of tirofiban were analyzed by comparing the differences in lung dry to wet ratio, total protein, myeloperoxidase (MPO), inflammatory factors and quantitative results of HE staining. The platelet activation level in whole blood and immunofluorescence (IF) quantification of platelet and neutrophil fluorescence were detected by flow cytometry to analyze the mechanism of tirofiban on TRALI. 【Results】 1) The indexes of lung injury in the tirofiban TRALI intervention group and TRALI model group for HE staining were 0.663 3±0.141 9 vs. 0.173 3±0.120 4 (P<0.05), respectively; 2) Platelet activation levels(%)in whole blood in the TRALI group, normal group and tirofiban TRALI intervention group were 22.87±9.943 vs 5.070±2.234 vs 5.767±3.224(P<0.05), respectively. 3) The mean fluorescence density of platelet neutrophil aggregates for IF detection in the tirofiban intervention group and TRALI model group was 21.89±3.536 vs. 32.77±0.9624 (P<0.05). 【Conclusion】 The platelet GP Ⅱ b/Ⅲa-specific inhibitor tirofiban inhibited platelet-neutrophil binding in mice, thus could possibly intervene in TRALI.