Digital repair for a patient with limited mouth opening: a case report and literature review / 口腔疾病防治

Objective@#To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening (microstomia) due to systemic scleroderma.@*Methods@#This study followed medical ethics, and informed consent has been obtained from patients. A case of Ken's Type I mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression. Individual trays were made based on the patient's left and right mandibular dentition, and segmented molds were obtained. Simultaneously, intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles. After each part of the model was obtained, the mandibular model was scanned and digitally aligned to form the final denture model, and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing (CAD/CAM) technology. At the same time, combined with the literature, the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.@*Results@#The denture was well retained and achieved a good repair effect. The patients expressed satisfaction with the mastication efficiency and other functions of the denture. The findings of the literature review show that the integration of digital technology with the traditional impression method, along with computer fitting, can accurately obtain the patient's oral model and facilitate successful follow-up repairs. However, when the anterior mandibular dentition of the patient is absent, the margin of error is increased in this procedure, which deserves further exploration.@*Conclusion@#Utilizing digital technology as the leading method, combined with the traditional impression method of segmental impression, for the repair of dental defects in patients with limited mouth opening, has proven to be effective. Thus, patients report a positive medical experience with high satisfaction, indicating that this approach is worthy of clinical promotion.

Diabetic microaneurysms detected by fluorescein angiography spatially correlate with regions of macular ischemia delineated by optical coherence tomography angiography

Purpose: To characterize the relationship between diabetic macular ischemia (DMI) delineated by optical coherence tomography angiography (OCTA) and microaneurysms (MAs) identified by fundus fluorescein angiography (FFA). Methods: Patients with diabetic retinopathy (DR) who underwent OCTA and FFA were retrospectively identified. FFA images were cropped and aligned with their respective OCTA images using i2k Align Retina software (Dual?Align, Clifton Park, NY, USA). Foveal avascular zone (FAZ) and ischemic areas were manually delineated on OCTA images, and MAs were marked on the corresponding FFA images before overlaying paired scans for analysis (ImageJ; National Institutes of Health, Bethesda, MD, USA). Results: Twenty?eight eyes of 20 patients were included. The average number of MAs identified in cropped FFA images was 127 ± 42. More DMI was noted in the superficial capillary plexus (SCP; 36 ± 13%) compared to the deep capillary plexus (DCP; 28 ± 14%, P < 0.001). Similarly, more MAs were associated with ischemic areas in SCP compared to DCP (92.0 ± 35.0 vs. 76.8 ± 36.5, P < 0.001). Most MAs bordered ischemic areas; fewer than 10% localized inside these regions. As DMI area increased, so did associated MAs (SCP: r = 0.695, P < 0.001; DCP: r = 0.726, P < 0.001). Density of MAs surrounding FAZ (7.7 ± 6.0 MAs/mm2) was similar to other DMI areas (SCP: 7.0 ± 4.0 MAs/mm2, P = 0.478; DCP: 9.2 ± 10.9 MAs/mm2, P = 0.394). Conclusion: MAs identified in FFA strongly associate with, and border areas of, DMI delineated by OCTA. Although more MAs are localized to SCP ischemia, the concentration of MAs associated with DCP ischemia is greater. By contrast, few MAs are present inside low?flow regions, likely because capillary loss is associated with their regression.

Alinhamento partidário e oferta de políticas públicas no Brasil / Alineación partidaria y provisión de políticas públicas en Brasil / Partisan alignment and public policies provision in Brazil

Resumo Municípios partidariamente alinhados com o presidente ofertam mais políticas públicas? A entrega de serviços públicos é uma das atividades centrais dos governos. Uma vez que são os partidos políticos que controlam o Poder Executivo tanto no Governo Federal quanto no governo local, é razoável esperar que seus interesses partidários e eleitorais influenciem o curso da implementação de serviços. Neste artigo, analiso a cobertura da atenção básica à saúde como indicador de oferta. Dado o forte compartilhamento de responsabilidades entre os entes federados, argumento que o Governo Federal implementa políticas públicas de forma estratégica, aumentando a oferta de serviços em municípios partidariamente alinhados. Para testar empiricamente essa relação, estimo o efeito causal do alinhamento por meio de um desenho de regressão descontínua para eleições acirradas. Os resultados indicam que os municípios partidariamente alinhados com a Presidência da República têm cobertura da atenção básica à saúde, em média, 3% maior que outros governados por partidos oposicionistas. Em uma cidade com 10 mil habitantes, por exemplo, isso significaria 300 pessoas a mais sendo adequadamente atendidas por equipes de saúde.

Resumen ¿Los municipios alineados partidariamente con el presidente ofrecen más políticas públicas? La prestación de servicios públicos es una de las actividades centrales de los gobiernos. Dado que son los partidos políticos los que controlan el Poder Ejecutivo tanto en el Gobierno federal como en el local, es razonable esperar que sus intereses partidistas y electorales influyan en el curso de la implementación. En este artículo analizo la cobertura de la atención primaria de salud como indicador de provisión. Dada la fuerte compartición de responsabilidades entre las entidades federativas, argumento que el Gobierno federal implementa las políticas públicas de manera estratégica, aumentando la provisión de servicios en los municipios alineados partidariamente. Para probar empíricamente esta relación, estimo el efecto causal del alineamiento utilizando un diseño de regresión discontinua para elecciones reñidas. Los resultados indican que los municipios partidariamente alineados tienen, en promedio, una cobertura de atención primaria un 3% más alta que otros gobernados por partidos de oposición. En una ciudad de 10.000 habitantes, por ejemplo, esto significaría 300 personas más adecuadamente atendidas por los equipos de salud.

Abstract This research examines whether local governments politically aligned with the president's party offer more public policies. The delivery of public services is one of the central activities of governments. Since the political parties control the executive branch in both federal and local government, it is reasonable to expect that their partisan and electoral interests will influence policy implementation. This study analyzes the coverage of primary healthcare as an indicator of policy delivery. Given the strong sharing of responsibilities among federated entities, I argue that the federal government implements public policies strategically, increasing the supply of services in partisan-aligned municipalities. To empirically test this relationship, I estimate the causal effect of alignment using a regression-discontinuity design for close elections. The results indicate that partisan-aligned municipalities have, on average, 3% higher coverage of primary healthcare than others governed by opposition parties. In a city with 10,000 inhabitants, for example, this would mean 300 more people receiving healthcare.

Sagittal Alignment Concepts and Spinopelvic Parameters / Conceitos de alinhamento sagital e parâmetros espinopélvicos

Abstract Spinal surgery continues to expand its horizons to care for disabled patients presenting pain and deformities. Over the past decade, our knowledge of spinal alignment, from the skull to the pelvis, has increased considerably. Such knowledge must expand to reach general orthopedists and improve the care required for so many people. Global spinal alignment is a critical concept in understanding the impact of pathological conditions (degenerative diseases, traumas, deformities) and their treatment, including spinal instrumentation and arthrodesis. Therefore, the treatment of any spinal disease must include the knowledge of the complexity of the spinopelvic alignment. At first, all parameters seem like pure mathematics, hardly applicable to the everyday life of the inattentive reader. However, it gradually becomes clear that, like everything else in orthopedics, biomechanics is an essential part of the knowledge of the musculoskeletal system, revealing the logic behind the physiology of movements. The knowledge of the sagittal alignment concepts and spinopelvic parameteres provide a better comprehension of the axial and appendicular skeletons, increasing the understanding of the physiological and adaptive spinal processes in the face of the degenerative process that increases throughout life.

Resumo A cirurgia da coluna continua a expandir seus horizontes para cuidar dos pacientes incapacitados com dor e deformidades. Desde a última década, nosso conhecimento sobre o alinhamento espinal, do crânio à pelve, aumentou consideravelmente. Portanto, faz-se necessária a expansão de tal conhecimento para o ortopedista geral, para que possamos proporcionar melhores cuidados para essa população. O alinhamento espinal global é um conceito crítico no entendimento do impacto ocasionado pela condição patológica (doença degenerativa, trauma, deformidade) e mesmo do seu tratamento, como na instrumentação e artrodese da coluna. O tratamento de qualquer doença na coluna deve incluir o entendimento da complexidade do alinhamento espinopélvico. A princípio, todos os parâmetros parecem puramente matemáticos e pouco aplicáveis à realidade do leitor mais desatento. Mas, aos poucos, fica claro que, como tudo em ortopedia, a biomecânica faz parte essencial do conhecimento do sistema musculoesquelético, tornando mais claras as lógicas da fisiologia do movimento. O conhecimento dos conceitos de alinhamento sagital e dos parâmetros espinopélvicos proporcionam uma melhor compreensão dos esqueletos axial e apendicular, além de um melhor entendimento dos processos fisiológicos e adaptativos da coluna frente ao processo degenerativo crescente que ocorre ao longo da vida.

Research progress of functional alignment robot assisted knee replacement / 中国骨伤

The correct alignment of the knee joint is considered to be one of the most influential factors in determining the long-term prognosis after total knee arthroplasty(TKA). In order to achieve the correct alignment goal, many different alignment concepts and surgical techniques have been established. For example, mechanical alignment(MA), kinematic alignment(KA) and functional alignment(FA) have their own characteristics. MA focuses on achieving neutral alignment of the limbs, parallel and equal bone gaps during stretching and flexion. KA aims to restore the patient 's natural joint line, make the joint level and angle normal and improve the physiological soft tissue balance, and strive to reproduce the normal knee function;among them, functional alignment(FA) developed with robot-assisted surgery technology is a relatively new alignment concept. It not only considers the alignment of the body, but also aims to achieve flexion and extension balance, while respecting the native soft tissue capsule. It not only restores the plane and slope of the in situ joint line accurately during the operation, but also takes into account the balance of soft tissue, which is a better alignment method. Therefore, it is of great significance to correctly construct the lower limb force line of patients, which is helpful to restore knee joint function, relieve pain symptoms and prolong the service life of prosthesi. However, compared with traditional TKA, the operation time of robot-assisted FA-TKA is prolonged, which means that the probability of postoperative infection will be greater. At present, most studies of FA technology report short-term results, and the long-term efficacy of patients is not clear. Therefore, long-term research results are needed to support the application of this technology. Therefore, the author makes a review on the research status of functional alignment.

The application of restricted kinematic alignment in total knee arthroplasty / 中华骨科杂志

Objective:To investigate the feasibility and therapeutic effect of total knee arthroplasty (TKA) with cruciate-retaining (CR) prosthesis by using FEM-X1 femoral extramedullary positioning instrument based on the theory of restricted kinematic alignment (rKA).Methods:Thirty five cases who underwent total knee arthroplasty in Nanjing Drum Tower Hospital from November 2019 to December 2020 were retrospectively analyzed, including 7 males and 28 females with an average age of 71± 8 years (ranging from 55 to 85 years) Following the guidance of rKA alignment, the FEM-X1 femoral extramedullary positioning instrument was used for TKA with CR prosthesis. Before the operation, the full-length lower limb radiographs of both anteroposterior and lateral views were taken in a standing position for preoperative assessment of lateral distal femoral angle (LDFA), the medial proximal tibial angle (MPTA) and hip-knee-ankle angle (HKA). According to the principle of rKA alignment, the target LDFA, MPTA and HKA were calculated. The proximal end of tibia and distal end of femur were cut using extramedullary positioning instrument respectively. The posterior femoral condyle was cut according to the tibial plateau and mediolateral soft tissue tension. The prosthesis was installed after osteotomy. The release of collateral ligaments, PCL function, release of PCL, patellofemoral trajectory, release of patellofemoral support band, the amount of blood loss and time of operation were recorded. Postoperative LDFA, MPTA, HKA, and posterior slope angle of tibial prosthesis were measured on X-ray images. The Knee Society Score (KSS) was used for functional evaluation.Results:Thirty five cases of TKA with CR prosthesis following rKA alignment were successfully completed. The operation time was 100 (90, 110) min, and the blood loss was 100 (100, 200) ml. 30 of them were followed up for 12.5±0.7 months (ranging from 12 to 14 months). The pre-operative and post-operative LDFA were 1.0°(-2.0°, 4.0°), 0°(-2.0°, 2.0°), MPTA were -4.0°(-5.0°, -1.0°), -2.0°(-3.0°, -1.0°), HKA were -3.0°(-3.0°, -1.0°), -2.0°(-3.0°, -1.0°). There was no significant difference between the three angles before and after operation ( Z=-0.89, P=0.372; Z=1.87, P=0.061; Z=1.03, P=0.302). The average posterior tibial slope was 5°(3°, 7°). At the follow-up of one year, the KSS clinical score was 94(92, 97) and functional score was 80(70, 90) in 30 cases. During the operation, PCL was released in 1 case because of excessive tension; and lateral retinacular release was performed in 1 case because of poor patellofemoral track. Conclusion:ITKA with CR prosthesis by using the extramedullary positioning instrument on the theory of rKA alignment showed a good clinical outcome at a short follow up.

Structure-guided engineering for improving the thermal stability of zearalenone hydrolase / 生物工程学报

Zearalenone is one of the most widely polluted Fusarium toxins in the world, seriously endangering livestock and human health. Zearalenone hydrolase (ZHD) derived from Clonostachys rosea can effectively degrade zearalenone. However, the high temperature environment in feed processing hampers the application of this enzyme. Structure-based rational design may provide guidance for engineering the thermal stability of enzymes. In this paper, we used the multiple structure alignment (MSTA) to screen the structural flexibility regions of ZHD. Subsequently, a candidate mutation library was constructed by sequence conservation scoring and conformational free energy calculation, from which 9 single point mutations based on residues 136 and 220 were obtained. The experiments showed that the thermal melting temperature (Tm) of the 9 mutants increased by 0.4-5.6 ℃. The S220R and S220W mutants showed the best thermal stability, the Tm of which increased by 5.6 ℃ and 4.0 ℃ compared to that of the wild type. Moreover, the thermal half-inactivation time at 45 ℃ were 15.4 times and 3.1 times longer, and the relative activities were 70.6% and 57.3% of the wild type. Molecular dynamics simulation analysis showed that the interaction force at and around the mutation site was enhanced, contributing to the improved thermal stability of ZHD. The probability of 220-K130 hydrogen bond of the mutants S220R and S220W increased by 37.1% and 19.3%, and the probability of K130-D223 salt bridge increased by 30.1% and 12.5%, respectively. This work demonstrated the feasibility of thermal stability engineering strategy where the structural and sequence alignment as well as free energy calculation of natural enzymes were integrated, and obtained ZHD variants with enhanced thermal stability, which may facilitate the industrial application of ZHD.

Effect of pursed lip breathing on respiratory function and respiratory muscle strength while using a spine mat / 体力科学

It has been reported that using of the spine mat increases chest expansion, inspiratory capacity (IC) and maximum inspiratory mouth pressure (PImax). However, no changes were observed in other respiratory functions and the respiratory muscle strength. The purpose of this study was to clarify the effects of pursed-lip breathing lying on the spine mat to the respiratory function and respiratory muscle strength. Forty-two adult male participants were assigned to two groups; an intervention group (IG group) of 21 participants who performed pursed-lip breathing on top of a spine mat and a control group (CG group) of 21 participants who performed pursed-lip breathing only. The intervention period was 5 days, and the respiratory features evaluated were chest expansion, respiratory function, respiratory muscle strength, and spinal alignment. A significant increase between the Pretest and the Posttest in chest expansion at the circumference of the axilla level, of the xiphoid process level and of the 10th rib level was observed only in IG group. For the respiratory function and the respiratory muscle strength, intervention group showed significant increases in percentage of vital capacity (%VC), tidal volume (TV), PImax, and maximum expiratory mouth pressure (PEmax). In the control group, only the TV indicated a significant increase. Regarding changes before and after the intervention, the intervention group showed significantly higher PImax and PEmax than the control group. No significant difference in spinal alignment was observed between the two groups. These results showed that pursed-lip breathing lying on the spine mat would increase the PImax, PEmax and the chest expansion.

Alignment efficiency and three-dimensional assessment of root resorption after alignment with conventional and copper-nickel-titanium archwires: A randomized controlled trial

ABSTRACT Objective: To compare alignment efficiency and root resorption between nickel-titanium (NiTi) and copper-nickel-titanium (CuNiTi) archwires after complete alignment in mandibular anterior region. Methods: In this two-arm parallel single-blind randomized controlled trial, forty-four patients with Class I malocclusion with mandibular anterior crowding were recruited form orthodontic clinic of All India Institute of Medical Sciences (Jodhpur, India). Patients were randomly allocated into NiTi and CuNiTi groups, with a 1:1 allocation. Alignment was performed using 0.014-in, 0.016-in, 0.018-in, 0.019x0.025-in archwire sequence in the respective groups, which terminated in 0.019 x 0.025-in stainless-steel working archwire. The primary outcome was alignment efficiency, measured on study models from baseline (T0) to the first, second, third, fourth and fifth-month (T5). Secondary outcome was root resorption, measured from CBCT scans taken at T0 and T5. Mixed-factorial ANOVA was used to compare Little's Irregularity Index (LII). For assessing the proportion of patients with complete alignment at the end of each month, Kaplan-Meier survival curve was built and time to treatment completion was compared between groups using log rank test. Paired t-test was used to assess external apical root resorption (EARR) within groups, whereas independent t-test was used to evaluate LII and EARR between the groups. Results: Twenty-two patients were recruited in each group. One patient was lost to follow-up in the CuNiTi group. No statistically significant differences were observed in alignment efficiency between the groups (p>0.05). Intergroup comparison revealed that the changes in root measurement in three-dimensions were not statistically significant (p>0.05), except for mandibular right central incisor, which showed increased resorption at root apex in NiTi group (p<0.01). Conclusion: The two alignment archwires showed similar rate of alignment at all time points. Root resorption measurement did not differ between the NiTi and CuNiTi groups, except for the mandibular right central incisor, which showed more resorption in NiTi group.

RESUMO Objetivo: Comparar os fios de níquel-titânio (NiTi) e de cobre-níquel-titânio (CuNiTi) quanto à eficiência do alinhamento e quantidade de reabsorção radicular, após alinhamento completo dos dentes da região anterior inferior. Métodos: Neste estudo clínico randomizado, cego, paralelo, de dois braços, quarenta e quatro pacientes com má oclusão Classe I e apinhamento anterior inferior foram recrutados na clínica ortodôntica do All India Institute of Medical Sciences (Jodhpur, India). Os pacientes foram alocados aleatoriamente nos grupos NiTi e CuNiTi, na proporção de 1:1. O alinhamento foi realizado usando a sequência de fios 0,014", 0,016", 0,018" e 0,019" x 0,025" nos respectivos grupos, finalizando com o arco de trabalho 0,019" x 0,025" de aço inoxidável. O desfecho primário foi a eficiência do alinhamento, medida nos modelos de estudo nos tempos inicial (T0) e após um, dois, três, quatro e cinco meses (T5). O desfecho secundário foi a reabsorção radicular, medida a partir de tomografias computadorizadas realizadas em T0 e T5. ANOVA fatorial mista foi utilizada para comparar o Índice de Irregularidade de Little (IIL). Para avaliar a proporção de pacientes com alinhamento completo ao fim de cada mês, foi construída uma curva de sobrevida pelo método de Kaplan-Meier, e o tempo até o fim do tratamento foi comparado entre os grupos por meio do teste log-rank. Um teste t pareado foi utilizado para avaliar a reabsorção radicular apical externa (RRAE) dentro dos grupos, enquanto um teste t independente foi utilizado para avaliar o IIL e a RRAE entre os grupos. Resultados: Vinte e dois pacientes foram recrutados em cada grupo. Um paciente perdeu o acompanhamento no grupo CuNiTi. Não foram observadas diferenças estatisticamente significativas entre os grupos quanto à eficiência do alinhamento (p>0,05). A comparação intergrupos revelou que as alterações na RRAE medida em três dimensões não foram estatisticamente significativas (p>0,05), exceto para o incisivo central inferior direito, que apresentou aumento da RRAE no grupo NiTi (p<0,01). Conclusão: Os dois tipos de fios de alinhamento apresentaram taxa de alinhamento semelhante em todos os momentos. A medida da reabsorção radicular não diferiu entre o grupo NiTi e CuNiTi, exceto para o incisivo central inferior direito, que apresentou maior reabsorção no grupo NiTi.

Cross-cultural invariance of the Spanish version of the COVID-19 Assessment Scorecard to measure the perception of government actions against COVID-19 in Latin America

Abstract Objectives The present study aimed to evaluate the measurement invariance of a general measure of the perception of governmental responses to COVID--19 (COVID-SCORE-10) in the general population of 13 Latin American countries. Methods A total of 5780 individuals from 13 Latin American and Caribbean countries selected by non-probabilistic snowball sampling participated. A confirmatory factor analysis was performed and the alignment method was used to evaluate invariance. Additionally, a graded response model was used for the assessment of item characteristics. Results The results indicate that there is approximate measurement invariance of the COVID-SCORE-10 among the participating countries. Furthermore, IRT results suggest that the COVID-SCORE-10 measures with good psychometric ability a broad spectrum of the construct assessed, especially around average levels. Comparison of COVID-SCORE-10 scores indicated that participants from Cuba, Uruguay and El Salvador had the most positive perceptions of government actions to address the pandemic. Thus, the underlying construct of perception of government actions was equivalent in all countries. Conclusion The results show the importance of initially establishing the fundamental measurement properties and MI before inferring the cross-cultural universality of the construct to be measured.

Structure-function relationships among selected human coronaviruses-Supplementary data

Identifying the key proteins among different types of human disease-causing coronaviruses is essential for the molecular mechanism and thereby designing potential drug molecules. Eight selected proteins of seven types of disease-causing coronaviruses, viz.SARS-CoV-2 (severe acute respiratory syndrome coronavirus2), SARS-CoV (severe acute respiratory syndrome coronavirus), MERS-CoV (middle east respiratory syndrome coronavirus), Human coronavirus OC43, Human coronavirus HKU1, Human coronavirus 229E and Human coronavirus NL63, were chosen for the comparison. Further, an attempt has been made to explore the most important host-pathogen interactions with a special focus on spike (RBD) protein region as this region deemed to be functionally most important. Epitope region was also identified which helps in the design of epitope-based vaccines. The structural comparison carried out among the seven types of human coronaviruses has revealed the molecular level details on the similarity among this series. This study has facilitated the identification of the important residues in the studied proteins which control the key functions such as viral replication and transmission. Thus, exploring the protein space in the family of coronaviruses, provide valuable insights into the molecular basis associated with the role of proteins and viral infections, which is expected to trigger the identification of the drug targets for coronaviruses infections, in a rational way.

Structure-function relationships among selected human coronaviruses-Supplementary data

Identifying the key proteins among different types of human disease-causing coronaviruses is essential for the molecular mechanism and thereby designing potential drug molecules. Eight selected proteins of seven types of disease-causing coronaviruses, viz.SARS-CoV-2 (severe acute respiratory syndrome coronavirus2), SARS-CoV (severe acute respiratory syndrome coronavirus), MERS-CoV (middle east respiratory syndrome coronavirus), Human coronavirus OC43, Human coronavirus HKU1, Human coronavirus 229E and Human coronavirus NL63, were chosen for the comparison. Further, an attempt has been made to explore the most important host-pathogen interactions with a special focus on spike (RBD) protein region as this region deemed to be functionally most important. Epitope region was also identified which helps in the design of epitope-based vaccines. The structural comparison carried out among the seven types of human coronaviruses has revealed the molecular level details on the similarity among this series. This study has facilitated the identification of the important residues in the studied proteins which control the key functions such as viral replication and transmission. Thus, exploring the protein space in the family of coronaviruses, provide valuable insights into the molecular basis associated with the role of proteins and viral infections, which is expected to trigger the identification of the drug targets for coronaviruses infections, in a rational way.

Structure-function relationships among selected human coronaviruses

Identifying the key proteins among different types of human disease-causing coronaviruses is essential for the molecular mechanism and thereby designing potential drug molecules. Eight selected proteins of seven types of disease-causing coronaviruses, viz.SARS-CoV-2 (severe acute respiratory syndrome coronavirus2), SARS-CoV (severe acute respiratory syndrome coronavirus), MERS-CoV (middle east respiratory syndrome coronavirus), Human coronavirus OC43, Human coronavirus HKU1, Human coronavirus 229E and Human coronavirus NL63, were chosen for the comparison. Further, an attempt has been made to explore the most important host-pathogen interactions with a special focus on spike (RBD) protein region as this region deemed to be functionally most important. Epitope region was also identified which helps in the design of epitope-based vaccines. The structural comparison carried out among the seven types of human coronaviruses has revealed the molecular level details on the similarity among this series. This study has facilitated the identification of the important residues in the studied proteins which control the key functions such as viral replication and transmission. Thus, exploring the protein space in the family of coronaviruses, provide valuable insights into the molecular basis associated with the role of proteins and viral infections, which is expected to trigger the identification of the drug targets for coronaviruses infections, in a rational way.

APLICACIÓN DEL MODELO DE PÉRDIDA DE ADN PARA EL DISEÑO DE CEBADORES EN Potamotrygon magdalenae (POTAMOTRYGONIDAE) / Application of the model of DNA loss for desing of primers in Potamotrygon magdalenae (Potamotrygonidae)

RESUMEN El diseño de cebadores es fundamental para amplificar regiones de genes debido a que la especificidad que mantienen cebador-secuencia de interés puede causar el éxito o fracaso en la reacción de PCR. En relación a Potamotrygon magdalenae (especie de interés de acuerdo al PAN Tiburones-Colombia), existe poca información disponible de aspectos relacionados con la genética poblacional de esta Raya. El objetivo del presente trabajo consistió en diseñar cebadores bajo los criterios del Modelo de Pérdida de ADN (DNA-LM), que permitan evaluar el estado genético de las poblaciones de P. magdalenae. Alineamos secuencias de la superfamilia Dayastoidea, disponibles en el NCBI, de los genes mitocondriales Citocromo C Oxidasa 1 (MT-CO1) y Citocromo b (MT-CYB). Seguimos los parámetros Gap open penalty (5), Gap extension penalti (0,2) y Terminalgap penalties (0,1) y seleccionamos dos pares de cebadores de acuerdo con el DNA-LM. Estimamos el producto amplificado del gen MT-CO1 en 916 pb y del gen MT-CYB en 774 pb, en muestras de P. magdalenae procedentes de diferentes ciénagas del Magdalena medio. Discutimos los resultados desde la perspectiva de validar la especificidad de los cebadores diseñados, teniendo en cuenta la correspondencia e identidad de las secuencias de los genes considerados. Los cebadores aquí reportados pueden contribuir a ampliar el conocimiento de la genética poblacional, biogeografía y filogenética de la raya de agua dulce P. magdalenae.

ABSTRACT The primer design is critical for amplifying gene regions because the specificity that primer-sequence maintain can cause success or failure in the PCR reaction. Concerning Potamotrygon magdalenae (a species of interest according to the PAN Tiburones-Colombia), there is little information available about aspects related to population genetics of this river stingray. This study aimed to design primers under DNA Loss Model (DNA-LM) criteria, which will allow assessing the genetics status of populations of P. magdalenae. We aligned sequences from the superfamily Dayastoidea, available in the NCBI, of the mitochondrial genes Cytochrome C Oxidase 1 (MT-CO1) and Cytochromeb (MT-CYB). We followed the parameters Gap open penalty (5), Gap extension penalty (0.2) and Terminal gap penalties (0.1) and selected two pairs of primers according to the DNA-LM. We calculated the amplified product of the MT-CO1 gene in 916 pb and the MT-CYB gene in 774 pb in samples from different swamps of the middle Magdalena. We discussed the results from the perspective of validating the specificity of the primers designed, considering the correspondence and identity of gene sequences considered. The primers reported here will contribute to broadening the knowledge of population genetics, biogeography and phylogenetic of the river stingray P. magdalenae.

Accuracy of Toric Intraocular Lens Axis Alignment Using Manual Slit Lamp Method and CALLISTO Eye Image-Guided System

Aims: Image-guided systems are the gold standard for determining toric intraocular lens (IOL) axis alignment. However, their high cost prevents widespread use of these systems. As an alternative, a simpler and affordable method could be performed manually using a slit-lamp biomicroscope. This study aims to compare the accuracy of manual toric IOL axis marking using a slit-lamp compared to the CALLISTO eye image-guided system.Study Design: Prospective comparativeMethods: In this prospective study, toric IOL axis alignment of 42 eyes with cataract and coexisting corneal astigmatism were evaluated using manual slitlamp method and CALLISTO eye image-guided method. Preoperative and postoperative uncorrected visual acuity, best corrected visual acuity, amount of spherical and astigmatic refractive errors, and postoperative IOL axis alignment were evaluated. Intraclass correlation of the manual method was calculated and the difference of IOL axis alignment to the image-guided method was compared.Results: Toric IOL implantation reduced the amount of astigmatic refractive error from -1.63 � 0.65 D to -0.50 � 0.19 D in the image-guided group and from -1.93 � -0.90 D to -0.87 � 0.26 D in the manual slitlamp group. As many as 90.5% of eyes in the image-guided group and 81.0% of eyes in the manual slitlamp group reached the target induced astigmatism (p=0.38). Manual axis marking showed intraclass correlation of 99.3%. However, when the manual method was compared to the image-guided method a mean difference in axis alignment of 10.98o (95% confidence interval: 9.32o - 12.63o) was observed.Conclusions: Alignment of toric IOL axis using the manual method demonstrated a consistent result; yet producing a considerable difference to the result of the image-guided method.

Research progress in judgment criteria for reduction of femoral intertrochanteric fractures / 中华创伤骨科杂志

With accelerated aging process of the population, femoral intertrochanteric fractures have gradually become another major social health problem in China. Internal fixation is still the gold standard treatment for the fractures. Fracture reduction is the first step of the treatment and also the first element that affects the treatment efficacy. It is still controversial in clinical practice how to evaluate the quality of fracture reduction during internal fixation of the fractures. This article systematically expounds and analyzes the 7 systems of judging criteria for the reduction of intertrochanteric fractures from the aspects of fracture alignment, fracture apposition, difference in judgment criteria, and difference in imaging methods, in order to provide a reference for reaching consensus and improving curative effects.

From the Origins of SARS-CoV-2 to the Correct Application of BLAST / 中国生物化学与分子生物学报

Basic local alignment search tool (BLAST) is one of the popular sequence similarity analysis tools. However, some students and researchers just blindly use the default parameters. Moreover, some students are confused about how to choose the right program. In a word, it is prone to be misused and researchers often draw conclusions incorrectly. In view of this, we traced back the internet hot topic in early 2020 - "MORDERATELY STRONG CONFIRMATION OF A LABORATORY ORIGIN OF COVID-19", and took it as teaching materials to guide the student to use BLAST currently through reanalyzing and reproducing the source of errors. Then we arranged an interesting experiment about fabricating dinosaur genes through modifying a chicken gene. In the experimental design to make the students grasp the BLAST tools better, one group fabricated the dinosaur gene and the other group decrypted the added bases. This instructional design could be conducive to cultivate students ' ability about distinguishing different viewpoints correctly, and we hope it can be enlightening and helpful to the teaching of BLAST tools.

Advances of chromatogram retention time alignment algorithms in proteomics / 生物工程学报

Chromatography is a basic process in the current proteomics workflow, and the retention time alignment of the chromatogram is one of the important steps to effectively improve the identification and quantification accuracy. After years of development, a series of algorithms for retention time alignment have been developed. This review summarizes the advances of chromatographic retention time alignment algorithms and tools for proteomics analysis from the perspective of proteomics users, and discusses the development and future application directions.

Effects of kinematic alignment on range of motion after total knee arthroplasty / 中国康复理论与实践

ObjectiveTo explore the effect of kinematic alignment on postoperative knee function for patients after total knee arthroplasty (TKA). MethodsFrom June, 2020 to October, 2021, 200 patients undergoing primary TKA in Beijing Chaoyang Hospital were divided into mechanical alignment (MA) group (n = 100) and kinematic alignment (KA) group (n = 100). All the patients accepted comprehensive rehabilitation after operation. They were assessed with Keen Society Score (KSS) before and three months after operation, with Visual Analogue Scale for pain (VAS) before, and three days and three months after operation. The time of first standing, the time of first straight-leg raising more than 30°, and the active range of motion (AROM) of knee before, and one, two and three days, and one and three months after operation were recorded, as well as where to go after discharge. ResultsA total of 96 patients in MA group and 98 in KA group finished the research. The AROM of knee improved more in the KA group than in the MA group after operation (Fgroup = 8.816, P = 0.017), and the incidence going to the rehabilitation institutes was less (χ2 = 6.542, P = 0.011). ConclusionKA may promote the rapid recovery of AROM of knee for patients after TKA, and reduce the needs of institute-based rehabilitation after discharge, to save medical costs.

Change in crown inclination accompanying initial tooth alignment with round archwires

ABSTRACT Objective: To evaluate, in-vitro, the change in crown inclination that occurs during orthodontic leveling and alignment using different archwire-bracket-ligation combinations. Materials and Methods: Four archwire types were tested: (1) 0.012-in stainless steel and (2) 0.0155-in stainless steel multi-stranded, (3) 0.012-in nitinol Orthonol® and (4) 0.012-in nitinol Thermalloy®. Combinations with five types of 0.022-in slot orthodontic brackets were tested: SmartClipTM and Time3® self-ligating brackets, Mini-Taurus® and Victory SeriesTM conventional brackets, and Synergy® conventional-low friction bracket. Conventional brackets were ligated with both stainless steel and elastomeric ligatures. The simulated malocclusion comprised 2.0mm gingival and 2.0mm labial displacements of a maxillary right central incisor. Rotation around the Y-axis (representing labio-palatal inclination) was measured for the different archwire-bracket-ligation combinations. Results: The largest rotation was measured whith Orthonol® and Thermalloy® wires when combined with SmartClipTM brackets (8.07±0.24º and 8.06±0.26º, respectively) and with Synergy® brackets ligated with stainless steel ligatures (8.03±0.49º and 8.0±0.37º, respectively). The lower rotation was recorded when Thermalloy®, multi-stranded, and Orthonol® wires were ligated with elastomeric rings to Mini-Taurus® brackets (1.53±0.18º, 1.65± 0.23º and 1.70±0.28º, respectively) and to Victory SeriesTM brackets (1.68± 0.78º, 2.92± 1.40º and 1.74±0.46º, respectively). Conclusions: All archwire-bracket-ligation combinations produced lingual crown inclination; however, lower changes were observed when the conventional brackets were ligated with elastomeric rings. The multi-stranded archwire produced less rotation with nearly every bracket-ligation combination, compared to the other archwires. The effect of the archwire-bracket-ligation combination on tooth inclination during leveling and alignment should be considered during planning treatment mechanics.

RESUMO Objetivo: Avaliar, in vitro, as mudanças na inclinação das coroas dentárias que acontecem durante o alinhamento e nivelamento usando diferentes combinações de arcos/braquetes/ligaduras. Material e Métodos: Foram usados quatro tipos de arcos ortodônticos: (1) 0,012" de aço inoxidável, (2) 0,0155" de aço multifilamentado, (3) Orthonol® 0,012" de nitinol e (4) Thermalloy® 0,012" de nitinol. Esses arcos foram combinados com cinco tipos de braquetes ortodônticos com slot 0,022": braquetes autoligáveis SmartClipTM e Time3®, braquetes convencionais Mini-Taurus® e Victory SeriesTM, e braquetes convencionais de baixo atrito Synergy®. Os braquetes convencionais receberam ligaduras de aço ou elastoméricas. A má oclusão simulada foi composta por um deslocamento do incisivo central superior direito em 2 mm para a cervical e 2 mm para a vestibular. A rotação ao redor do eixo Y (representando a inclinação vestibulolingual) foi medida para as diferentes combinações de arco/braquete/ligadura. Resultados: A maior rotação foi medida quando os arcos Orthonol® e Thermalloy® foram usados com os braquetes SmartClipTM (8,07±0,24º e 8,06±0,26º, respectivamente) e com os braquetes Synergy® com ligaduras metálicas (8,03±0,49º e 8,0±0,37º, respectivamente). A menor rotação foi vista quando os arcos Thermalloy®, multifilamentado e Orthonol® foram presos por ligaduras elastoméricas aos braquetes Mini-Taurus® (1,53±0,18º, 1,65±0,23º e 1,70±0,28º, respectivamente) e aos braquetes Victory SeriesTM (1,68±0,78º, 2,92±1,40º e 1,74±0,46º, respectivamente). Conclusões: todas as combinações arco-braquete-ligadura produziram inclinação palatina da coroa. Entretanto, as menores mudanças foram observadas quando os braquetes convencionais receberam ligaduras elastoméricas. O arco multifilamentado produziu menor rotação com quase todas as combinações braquete-ligadura, em comparação aos outros arcos. O efeito da combinação arco-braquete-ligadura na inclinação dentária durante o alinhamento e nivelamento deve ser considerado durante o planejamento da mecânica dos tratamentos.