Orbital Apex Syndrome – A Case Report

Orbital apex syndrome is characterized by vision loss and ophthalmoplegia due to the involvement of the orbital apex. The signs and symptoms vary depending upon the involvement of the structures within the orbital apex, the superior orbital fissure or the cavernous sinus. Clinical evaluation is the key to the diagnosis which is aided by neuro-imaging modalities including brain and orbital Magnetic Resonance Imaging and Computed Tomography scans. In rare instances, a biopsy may be needed to aid in diagnosis. Treatment depends on what the nature of the lesion.

In Vitro Comparative Study Of Four Electronic Apex Locators In Detecting Apical Constriction

Objective: Minor constriction which is the narrowest diameter is considered to be the appropriate apical limit of endodontic treatment. Apex locators provide greater precision, fewer procedural errors, less discomfort to the patient during measurement of working length. The aim of this article is to compare the accuracy of four electronic apex locators in detecting the apical constriction using histological sections as the gold standard. 80Materials and Methods: extracted single-rooted permanent teeth were selected and coronally flattened for stable reference point. Access cavity was prepared and canal patency was checked. Samples were embedded in alginate upto cemento-enamel junction. Working length was determined with the apex locators. A 15 K file adjusted to that reading was placed in the root canal and stabilized with flowable composite. Apical 4 mm of root was longitudinally sectioned and the position of the file in relation to the minor constriction was recorded for each tooth under stereomicroscope at 40X magnification. Chi-square test was carried out to test the difference in accuracy at various levels from the minor foramen. Kruskal Wallis Test was carried out to compare the differences between the study groups for the distance from the tip of the file relative to the minor foramen (P<0.05). Measurements of mean working lengths within ±0.5 mm of minor diameter were 85%Results: acceptable for CanalPro followed by Root ZX Mini (80%) and Propex Pixi (80%) and the least by DPEX V (65%). Conclusion: Accuracy of these instruments for detecting the minor diameter is acceptable for clinical practice

Effects of different frequencies of pricking-bloodletting at auricular points plus auricular point sticking therapy on the serum levels of related factors in patients with acne vulgaris / 针灸推拿医学（英文版）

Objective: To observe the effects of different frequencies of pricking-bloodletting at auricular points plus auricular point sticking therapy on the levels of the serum immunoglobulin G (IgG), immunoglobulin M (IgM), testosterone (T), and insulin-like growth factor-1 (IGF-1) in patients with acne vulgaris (AV). Methods: Ninety patients with AV were randomly assigned to treatment group 1, treatment group 2, and treatment group 3 according to the random number remainder grouping method, with 30 cases in each group. All three groups received pricking-bloodletting at auricular points plus auricular point sticking therapy. Treatment group 1 was treated once a week, treatment group 2 was treated twice a week, and treatment group 3 was treated 3 times a week. Four-week treatment was taken as 1 treatment course, and 3 treatment courses were observed. On the day before the start of the study and on the day next to the end of each course, the global acne grading system (GAGS) score was recorded, and 3 mL of blood from the median cubital vein was collected to test the serum levels of IgG, IgM, T, and IGF-1. After 3 courses of treatment, the efficacy index was calculated according to the GAGS score, and the serum indicators in patients with effective treatment (efficacy index ≥20％) and complete sampling were analyzed. Results: A total of 60 patients were included in the final blood indicator analysis. After 3 courses of treatment, the intra-group comparisons showed that the serum IgG level increased significantly in patients in treatment group 1 (P<0.01); the serum T level decreased significantly in the female patients in treatment group 2 (P<0.05); the IGF-1 level significantly decreased in the patients in all three groups (P<0.05 or P<0.01). There were no significant differences in the serum levels of IgG, IgM, T, and IGF-1 among the three groups at each time point (P>0.05). Conclusion: Pricking-bloodletting at auricular points plus auricular point sticking therapy can affect the levels of serum IgG, T, and IGF-1 in AV patients. The level of the serum IGF-1 can be reduced by treatment once a week, twice a week, or 3 times a week. Treatment once a week can increase the patients' serum IgG level, and treatment twice a week can significantly decrease the serum T level in female patients. Reducing the serum IGF-1 level may be one of the action mechanisms of pricking-bloodletting at auricular points plus auricular point sticking therapy in treating AV.

Study of the systemic biopsy tissue quality in different prostate region / 中华泌尿外科杂志

Objective:To explore the quality differences of systemic biopsy specimens from different regions in prostate biopsy.Methods:The data of 806 patients who underwent transperineal prostate biopsy from May 2013 to December 2020 in Northern Jiangsu People’s Hospital were retrospectively reviewed. The median age of the patients was 72 (66, 77) years old, median PSA was 18.4 (10.3, 34.2) ng/ml, and prostate volume was 43 (32, 56) ml. Tissue quality were graded from low to high as follows. One score means multiple fragments with fragmented tissue ≤5 mm. Two scores means at least one fragment >5 mm and ≤10 mm. Three scores means at least one fragment >10 mm. The prostate specimens fragmentation scores and the length of the specimens in different regions of the prostate were collected to analyze.Results:A total of 806 patients were included in our study. The number of tissues was 8 866, and the mean length of tissues was 1.2 (1.0, 1.5) cm. The tissues of different region were scored according to the scoring criteria, of which 618 (7.0%) prostate tissues were scored as 1 score, 2 720 (30.7%) tissues were scored as 2 scores, and 5 528 (62.4%) tissues were scored as 3 scores. In the prostate apex, tissue quality of 1 score accounted for 11.7%(94/806), 2 scores accounted for 34.7%(280/806), and 3 scores accounted for 53.6%(432/806). While in the prostate base, tissue quality of 1 score accounted for 6.5%(524/8 060), 2 scores accounted for 30.3%(2 449/8 060), and 3 scores accounted for 63.2%(5 096/8 060)( H=35.850, P<0.05). The mean length of the prostate apical tissue was 1.0 (0.8, 1.3) cm, which was significantly shorter than prostate basal tissue of 1.2(1.0, 1.5) cm ( Z=-11.353, P<0.05). Conclusions:In transperineal prostate biopsy, the apical tissue was more fragmented and shorter, prostate apex should be concerned.

Re-understanding the value of the tip-apex distance theory in guiding treatment of intertrochanteric femoral fracture / 中华创伤杂志

Intertrochanteric femoral fracture occurs frequently in elderly osteoporotic patients, with high disability and mortality, for which surgical treatment is necessary. Common surgical modalities for intertrochanteric femoral fracture include intramedullary and extramedullary internal fixation systems, but neither can avoid the complications like internal fixation cut-out or internal fixation cut-through of the femoral head after surgery. The tip-apex distance theory was once considered to be of great significance in avoiding internal fixation cut-out, with the mainstream view was that screw cut-out could be avoided to the maximum extent when the tip-apex distance was ≤25 mm. However, internal fixation that meets the criteria of the tip-apex distance theory may also show cut-out and "Z-effect" in clinical practice, which lacks a reasonable explanation. Based on the lever balance reconstruction theory and the buttress-stretch effect, the author re-understands the value of the tip-apex distance theory in guiding treatment of intertrochanteric femoral fracture, hoping to propose an enlightenment for the treatment of intertrochanteric femoral fracture.

Effectiveness of anterior cruciate ligament reconstruction with personalized femoral locator based on apex of deep cartilage / 中国修复重建外科杂志

OBJECTIVE@#To investigate the effectiveness of anterior cruciate ligament (ACL) reconstruction assisted by personalized femoral locator based on the apex of deep cartilage (ADC) combined with patient imaging data.@*METHODS@#Between January 2021 and January 2022, a total of 40 patients with primary ACL rupture were selected and randomly divided into study group (ACL reconstruction assisted by personalized femoral locator based on ADC) and control group (ACL reconstruction assisted by intraoperative fluoroscopy and traditional femoral locator), with 20 cases in each group. There was no significant difference in gender, age, body mass index, affected side, cause of injury, and preoperative International Knee Documentation Committee (IKDC) score, Lyshlom score, and Tegner score between the two groups ( P>0.05). IKDC score, Lyshlom score, and Tegner score were used to evaluate the functional recovery of the affected knee before operation and at 3, 6, and 12 months after operation. CT scan and three-dimensional reconstruction were performed before and after operation to measure the horizontal distance from ADC to the anterior cartilage margin (L) and the horizontal distance from ADC to the center of the femoral canal (I), and the anteroposterior position of the bone canal (R) was calculated by I/L; the distance from the center to the distal cartilage margin (D) was measured on the two-dimensional cross section; the R value and D value were compared between the two groups.@*RESULTS@#The operation time of the study group was significantly less than that of the control group [ MD=-6.90 (-8.78, -5.03), P<0.001]. The incisions of the two groups healed by first intention, and no complication such as intra-articular infection, nerve injury, and deep vein thrombosis of lower limbs occurred. There was no significant difference in the R value and D value between the preoperative simulated positioning and the actual intraoperative positioning in the study group [ MD=0.52 (-2.85, 3.88), P=0.758; MD=0.36 (-0.39, 1.11), P=0.351]. There was no significant difference in the actual intraoperative positioning R value and D value between the study group and the control group [ MD=1.01 (-2.57, 4.58), P=0.573; MD=0.24 (-0.34, 0.82), P=0.411]. The patients in both groups were followed up 12-13 months (mean, 12.4 months). The IKDC score, Lysholm score, and Tegner score of the two groups increased gradually with time, and there were significant differences between pre- and post-operation ( P<0.05). There was no significant difference in the scores between the two groups at each time point after operation ( P>0.05).@*CONCLUSION@#The personalized femoral locator based on ADC can accurately assist the femoral tunnel positioning in ACL reconstruction, which can shorten the operation time when compared with traditional surgical methods, and achieve satisfactory early effectiveness.

Morphological alterations of the apical foramen after foraminal enlargement: a systematic review of ex vivo studies / Alterações morfológicas do forame apical após ampliação foraminal: uma revisão sistemática de estudos ex vivo

Foraminal enlargement has been recommended to optimize the disinfection of infected root canals, although some authors still claim that the foramen should be kept in its original shape and position. This study aimed to evaluate morphological alterations of apical foramen after foraminal enlargement through a systematic review. An electronic search was conducted until April 2022. Ex vivo studies evaluating influence of foraminal enlargement in the morphologic changes of apical foramen were included. Studies without a control group or available full text were excluded. Foraminal deformation and area increase were considered as primary outcomes. Risk-of-bias assessment was performed according to a modified Joanna Briggs Institute's Checklist. From 702 studies retrieved, five were eligible. Most studies used single-rooted teeth, and rotary systems for instrumentation ranging from ­ 2 mm to + 1 mm to the apex. All studies found increased major foramen deformation after foraminal enlargement. Among four studies that evaluated foraminal area, all found increased area after foraminal enlargement. Insufficient data for touched/untouched walls by instruments and dentinal microcrack formation was observed. A low risk of bias was found. Foraminal enlargement during root canal preparation seems to increase deformation and major apical foramen area. Future investigations with standardized methodologies are encouraged (AU)

A ampliação foraminal tem sido recomendada para otimizar a desinfecção de canais radiculares infectados, embora alguns autores ainda afirmem que o forame deve ser mantido em sua forma e posição originais. Este estudo teve como objetivo avaliar alterações morfológicas do forame apical após ampliação foraminal por meio de uma revisão sistemática. Uma busca eletrônica foi realizada até abril de 2022. Foram incluídos estudos ex vivo que avaliaram a influência da ampliação foraminal nas alterações morfológicas do forame apical. Foram excluídos estudos sem grupo controle ou com texto completo indisponível. A deformação foraminal e o aumento da área foram considerados desfechos primários. A avaliação do risco de viés foi realizada de acordo com uma lista de verificação modificada do Instituto Joanna Briggs. Dos 702 registros recuperados, cinco foram elegíveis. A maioria dos estudos utilizou dentes unirradiculares e sistemas rotatórios para instrumentação, com comprimento de trabalho variando de ­ 2 mm a + 1 mm até o ápice. Todos os estudos encontraram aumento da deformação do forame maior após ampliação foraminal. Dos quatro estudos que avaliaram a área foraminal, todos encontraram aumento de área após alargamento foraminal. Foram observados dados insuficientes para paredes tocadas/intocadas pelos instrumentos e formação de microfissuras dentinárias. Um baixo risco de viés foi encontrado. A ampliação foraminal durante o preparo do canal radicular parece aumentar a deformação e a área do forame apical. Futuras investigações com metodologias padronizadas são incentivadas (AU)

Estudio de la morfología de los conductos radiculares de los primeros premolares superiores en tomografía computarizada de haz cónico / Study of the morphology of root canals of the first upper premolars in cone beam computed tomography

Objetivo: analizar, mediante tomografía computarizada de haz cónico (TC o CBCT [Cone Beam Computed Tomograph]) la frecuencia del tipo de morfología interna de los conductos radi- culares según la clasificación de Vertucci y el número de raíces de los primeros premolares superiores. Material y métodos: en una población argentina de 50 pacientes, 30 de sexo femenino y 20 masculino, que concurrieron a la Cátedra de Diagnóstico por Imá- genes de la Facultad de Odontología de la Universidad de Buenos Aires, se evaluaron 100 primeros premolares superiores con CBCT. Se estudiaron las variables: número de raíces, tipo de morfología interna, edad, sexo y lado. Fueron seleccionadas las tomografías de maxilar superior que incluyeron ambos primeros premolares en salud dental, periodontal y con ápice cerrado. Se realizó una adquisición volumétrica 100 × 90 mm y tamaño de vóxel de 150 µm. Se realizó la exploración de las imágenes en el plano axial de los tercios apical, medio y cervical de las piezas 1.4 y 2.4. Se utilizó un corte axial, observando en él, el tercio apical, medio y cervical de las piezas 1.4 y 2.4. Cada premolar fue analizado con 30 cortes transversales. Se utilizó la clasificación de Vertucci para agrupar las distintas variables anatómicas de los conductos radiculares de los primeros premolares superiores, la cual consta de VIII tipolo- gías. Resultados: el tipo más representativo entre los 100 primeros premolares superiores, dentro de la clasificación de Vertucci, fue el tipo IV (dos conductos separados desde la cámara al ápice). La coincidencia de tipos entre los lados derecho (78%; IC 95%: 65 a 87%) e izquierdo (70%; IC 95%: 56 a 81%) fue significativa. La distribución según el número de raíces en el lado derecho (χ 2 = 2.88) e izquierdo (χ2 = 0.72) no presentó una heterogeneidad significativa. La coincidencia del número de raíces entre los lados derecho e izquierdo fue significativa. Conclusión: se comprobó el tipo de morfología interna más frecuente, el número de raíces y su variabilidad de acuerdo al lado, sexo, y edad; lo cual es de una relevante importancia para realizar una correcta instrumentación y obturación del sistema de conductos radiculares (AU)

Objective: to analyze, using cone beam computed tomography (CBCT), the frequency of the type of internal morphology of the root canals according to the Vertucci classification and the number of roots of the first upper premolars. Material and methods: 100 first upper premolars were evaluated with CBCT, which corresponded to 30 female and 20 male patients in the Chair of Diagnostic Imaging of the Faculty of Dentistry, University of Buenos Aires. Variables were studied: number of roots, type of internal morphology, age, sex and side. The tomography of the upper jaw with both first premolars in dental, periodontal and closed apex health, a 100 × 90 mm volumetric acquisition and a voxel size of 150 µm were selected. An axial cut was used, observing the apical, middle and cervical third of pieces 1.4 and 2.4. Each premolar was analyzed with 30 paraxial cuts. The Vertucci classification was used to group the different anatomical variables of the root canals of the first upper premolars which consists of VIII typologies. Results: the most representative type among the top 100 upper premolars within the Vertucci classification was type IV (two separate ducts from the chamber to the apex). The type coincidence between the right (78%; 95% CI: 65 to 87%) and left (70%; 95% CI: 56 to 81%) los primeros premolares superiores, la cual consta de VIII tipolo gías. Resultados: el tipo más representativo entre los 100 primeros premolares superiores, dentro de la clasificación de Vertucci, fue el tipo IV (dos conductos separados desde la cámara al ápice). La coincidencia de tipos entre los lados derecho (78%; IC 95%: 65 a 87%) e izquierdo (70%; IC 95%: 56 a 81%) fue significativa. La distribución según el número de raíces en el lado derecho (χ 2 = 2.88) e izquierdo (χ2 = 0.72) no presentó una heterogeneidad significativa. La coincidencia del número de raíces entre los lados derecho e izquierdo fue significativa. Conclusión: se comprobó el tipo de morfología interna más frecuente, el número de raíces y su variabilidad de acuerdo al lado, sexo, y edad; lo cual es de una relevante importancia para realizar una correcta instrumentación y obturación del sistema de conductos radiculares (AU))

Panoramic radiography and cone-beam computed tomography to measure distances between root apexes and anatomical structures / Radiografía panorámica y tomografía computarizada de haz cónico para medir distancias entre ápices radiculares y estructuras anatómicas

Aim: To compare the accuracy of the panoramic radiography with cone-beam computed tomography (CBCT) scans in measuring the distances between root apexes and the adjacent anatomical structures including the maxillary sinus and the mandibular canal. Material and Methods: A total of 200 CBCT scans (100 maxillary and 100 mandibular) from patients who also had corresponding panoramic radiography were selected. Linear measurements (in mm) presenting centralized image were made between the apexes of the maxillary teeth and the inferior wall of the maxillary sinus, and between the apexes of the mandibular teeth and the superior border of the mandibular canal by using specific software for panoramic radiography and the measurements on the coronal sections in CBCT scans. Data were submitted to inferential statistical analysis and Student's t-test for comparison between measurements. Results: CBCT scans were significantly more accurate than panoramic radiography to measure the distances between the apexes of the maxillary teeth and the inferior wall of the maxillary sinus (p<0.05) and between the apexes of the mandibular teeth and the superior border of the mandibular canal or mental foramen (p<0.05). Conclusion: CBCT scans present more accurate measurements than panoramic radiography.

Objetivo: Comparar la precisión de la radiografía panorámica con las exploraciones de la tomografía computarizada dental de haz en cónico (CBCT) para medir las distancias entre los vértices radiculares y las estructuras anatómicas adyacentes, incluidos el seno maxilar y el canal mandibular. Material y Métodos: Se seleccionaron un total de 200 tomografías CBCT (100 maxilares y 100 mandibulares) de pacientes que además tenían la correspondiente radiografía panorámica. Se realizaron mediciones lineales (en mm) que presentaban imagen centralizada entre los ápices de los dientes maxilares y la pared inferior del seno maxilar, y entre los ápices de los dientes mandibulares y el borde superior del canal mandibular mediante software específico para radiografía panorámica. y las mediciones en las secciones coronales en escaneos CBCT. Los datos se sometieron a análisis estadístico inferencial y prueba t de Student para comparación entre mediciones. Resultados: Las exploraciones CBCT fueron significativamente más precisas que la radiografía panorámica para medir las distancias entre los ápices de los dientes maxilares y la pared inferior del seno maxilar (p<0,05) y entre los ápices de los dientes mandibulares y el borde superior de los dientes mandibulares. canal o agujero mentoniano (p<0.05). Conclusión: Las exploraciones CBCT presentan mediciones más precisas que la radiografía panorámica.

Novel management of internal root resorption with vertical root fracture using mineral trioxide aggregate - A case report

Introduction: This case report presents the diagnosis and management of extensive internal root resorption (IRR) in a 17?year?old male patient, with a 9?year?old history of trauma. Method: The affected tooth 21 was associated with vertical root fracture (VRF) and incomplete apex closure with a substantial loss of tooth structure, including dentin and cementum. Encouraged by a healthy periodontal condition, the choice was made to use mineral trioxide aggregate (MTA) to reconstruct and reinforce the resorptive defect and the fractured segment. A composite veneer was placed to enhance the aesthetics. Result: A follow?up of the patient after 2 years revealed healing with a resolution of the lesion. Conclusion: This case report highlights the use of MTA as a lone?standing filling material for the treatment of IRR with VRF in a non?vital immature tooth

A segmental root development as an unusual healing response to the revitalization of mandibular second premolar

A 15-year-old patient reported persistent pain in the left mandibular second premolar (#35) following a traumatic bite 3 months ago. Clinical examination revealed a fractured central cusp suggestive of dens evaginatus. Intraoral periapical radiograph revealed an immature permanent tooth with a periapical radiolucency. A diagnosis of pulp necrosis with symptomatic apical periodontitis was made. The tooth was treated according to the revised guidelines of regenerative endodontic procedure by the American Association of Endodontics. The follow-up evaluation revealed a complete resolution of periapical pathology. A detached radiopaque tissue was appreciated at the 12-month follow-up. It resembled a broken root tip at the 24-month follow-up. Both the main root body and disjointed root tip developed independently. A cone-beam computed tomography evaluation at the 36-month follow-up confirmed the segmented development of the apical root tip.

CBCT study on the safe location of palatal microscrew implant anchorage nail between maxillary first and second molars / 口腔疾病防治

Objective@#Conebeam CT (CBCT) was used to measure the palatine between the maxillary first and second molars. The proximal and distal palatal widths of the maxillary first and second molar and the palatal mucosal thickness and bone tissue thickness when microscrew implant anchorage nail were implanted at different angles provided a reference for the clinical selection of microscrew implant placement.@* Methods@#The image data of 90 adult patients were selected as the research object, and the jaw bone was reconstructed by scanning. In maxillary palatine, selection of distances at 12 mm, 14 mm, 16 mm, and 18 mm from the palatal apex of maxillary first molar between the maxillary first and second molar were used as measurement, measured the proximal and distal palatal widths of maxillary first and second molar and the palatal mucosal thickness and bone tissue thickness when microscrew implant anchorage nails were implanted at 30 °, 45 °, 60 °, and 90 °. SPSS 26.0 software was used for one-way ANOVA and LSD pair comparison. @*Results@#The larger the angle of the microscrew implant anchorage nail was, the smaller the proximal and distal medial widths between the maxillary first and second molar, and the difference was statistically significant (P < 0.05). Compared with the 90° direction, the proximal and distal medial widths of the microscrew implant anchorage nail were larger in the 60° direction. The greater the angle of implantation, the smaller the mucosal thickness and the greater the bone tissue thickness, and the results showed a significant difference (P < 0.001). Compared with the direction of 30° and 45°, the mucosal thickness at the direction of 60° was smaller, and the bone tissue thickness was larger. The higher the position of the microscrew implant anchorage nail, the greater the width of the proximal and distal medial, and the difference was statistically significant (P < 0.05). Compared with the positions 12 and 14 mm from the palatal tip, the proximal and distal medial widths of the microscrew implant anchorage nail were larger. The higher the implant position was, the greater the mucosal thickness and the smaller the bone tissue thickness. The results showed a significant difference (P < 0.001). Compared with the position of 18 mm from the palatal tip of the maxillary first molar, the mucosal thickness was smaller and the bone tissue thickness was larger.@*Conclusion@#It is most appropriate to implant microscrew implant anchorage nail at least 10 mm in length in the direction of 60° at the palatal apex 16 mm from the maxillary first molar in palatine between the first and second molar.

Influence of different reciprocating systems on the apical extrusion of debris in flat-oval canals

Aim: To evaluate the apical extrusion of debris in flat-oval canals, using three reciprocating systems at two different working lengths (WL), 0 mm and 1 mm from the apical foramen. Methods: Ninety mandibular incisors were randomly divided into three groups based on the systems: WaveOne Gold #25.07 (WOG), ProDesign R #25.06 (PDR), and X1 Blue #25.06 (X1B). Extruded debris were collected and dried in pre-weighed Eppendorf tubes. Three consecutive weighings were performed for each tube, and the mean was calculated. If the assumptions of normality and homogeneity of variance were not met, the Kruskal-Wallis test was used to analyze the amount of extruded debris between groups with the same WL, and the Mann-Whitney U test was used for comparison within groups for each WL. Results: All groups had extruded debris, with higher median values occurring at 1 mm. No significant difference regarding the amount of debris extrusion was observed at 0 mm (p>0.05) and 1 mm (p>0.05) between groups. However, within the groups, at different WL, there was greater extrusion at 1 mm (p<0.05), with PDR differing significantly from the other systems (p<0.05). Conclusion: The extrusion of debris occurred regardless of the group, with higher values at 1 mm. However, using PDR at 1 mm from the apical foramen showed the highest values of extrusion

Avaliação de tampão apical em dentes bovinos permanentes jovens com hidróxido de cálcio e MTA: um estudo in vitro / Evaluation of apical plug in young permanent bovine teeth with calcium hydroxide and MTA: an in vitro study

O objetivo do presente estudo in vitro foi avaliar, por meio de radiografia digital, a qualidade de preenchimento dos canais de dentes incisivos bovinos permanentes jovens quando realizado tampão apical com hidróxido de cálcio e MTA associados a outros materiais e posteriormente obturados. Foram utilizados dentes incisivos permanentes bovinos com rizogênese incompleta preparados de forma manual com as limas tipo K, irrigados com hipoclorito de sódio 1% e soro fisiológico. Após, foram utilizados os materiais indicados para confecção do tampão apical: hidróxido de cálcio P.A associado ao propilenoglicol e ao iodofórmio; hidróxido de cálcio P.A juntamente com MTA e propilenoglicol e somente MTA, em seguida obturados com cones de guta percha e cimento AH Plus e radiografados para avaliação. Os dados foram submetidos ao teste Qui-Quadrado de Pearson e Teste exato de Fisher com nível de significância de 5%. Os resultados obtidos não apresentaram diferença estatisticamente significativa entre os três grupos, sendo que o valor resultado foi de p=0,442, porém o grupo composto pelo cimento de hidróxido de cálcio P.A associado ao MTA e propilenoglicol apresentou uma qualidade de preenchimento boa (100 %) em relação aos outros cimentos avaliados, que se mostraram satisfatório (40%) e bom (60%) no procedimento de apicificação. Não houve diferença significativa de qualidade de preenchimento de tampão apical nos grupos, no entanto o grupo composto pelo hidróxido de cálcio P.A. associado ao MTA e propilenoglicol apresentou resultado superior(AU)

The objective of the present in vitro study was to evaluate, through digital radiography, the quality of filling in the young permanent bovine incisor teeth canals when the apical buffer was performed with calcium hydroxide and MTA associated with other materials and subsequently filled. Permanent bovine incisor teeth with incomplete rhizogenesis were prepared manually with K files type, irrigated with 1% sodium hypochlorite and saline. Afterwards, the materials indicated for making the apical buffer were used: calcium hydroxide P.A associated with propylene glycol and iodoform; calcium hydroxide P.A together with MTA and propylene glycol and only MTA, then filled with gutta-percha cones and AH Plus cement and radiographed for evaluation. The data were submitted to the Pearson's Chi-square test and Fisher's exact test with a significance level of 5%, once the result value was p=0,442. The results obtained showed no statistically significant difference between the three groups, the result being p=0,442, however the group composed of calcium hydroxideP.A. cement associated with MTA and propylene glycol showed a good filling quality (100%) in relation to the other evaluated cements, which were satisfactory (40%) and good (60%) in apexification procedure. There was no significant difference in quality of plug apical filling in the groups, however the group composed of calcium hydroxide P.A cement associated with MTA and propylene glycol showed a superior result(AU)

Different techniques for the treatment of teeth with an incomplete root development and pulp necrosis: a systematic review / Diferentes técnicas para o tratamento de dentes com rizogênese incompleta e necrose pulpar: uma revisão sistemática

Introduction: The objective of this systematic review was to compare the apexification techniques of calcium hydroxide (Ca(OH)2), or mineral trioxide aggregate (MTA), with the pulp regeneration technique, using cohort studies, and non-randomized and randomized clinical trials. Methods: The methodology was based on electronic research in the following databases: PubMed, MEDLINE, Google Scholar, SciELO, and LILACS. In addition, a manual search was carried out using the references that were listed in the articles found. Results: A total of 403 potentially eligible studies were found, with seven being included in the inclusion criteria of this systematic review. The seven studies involved a total of 312 teeth. The minimum time of a follow-up period was 12 months. The irrigation solution most used was sodium hypochlorite, for both of the apexification and revascularization techniques. The medication commonly chosen in the apexification groups was Ca(OH)2, with antibiotic triple paste in the revascularization groups. The clinical rate of success in the groups treated with revascularization varied from 76% to 100%, while in the groups treated with apexification, it ranged from 68% to 100%. Only two studies reached a success rate equal to 100%. Conclusions: Variable levels of evidence were observed in relation to the treatments. However, it was confirmed that revascularization is an excellent option since its outcomes produced a greater gain of thickness and root length, besides developing a decrease in the apical foramen.

Introdução: O objetivo desta revisão sistemática foi comparar as técnicas de apexificação, com hidróxido de cálcio (Ca(OH)2) ou agregado trióxido mineral (MTA), com a técnica de regeneração pulpar, utilizando estudos coorte, ensaio clínico não randomizado e randomizado. Métodos: A metodologia foi baseada em pesquisa eletrônica nas seguintes bases de dados: PubMed, MEDLINE, Google Acadêmico, SciELO e LILACS. Além disso, foi realizada uma pesquisa manual utilizando as referências listadas nos artigos encontrados. Resultados: Foram encontrados 403 estudos potencialmente elegíveis, sendo sete incluídos nos critérios de inclusão desta revisão sistemática. Os sete estudos envolveram um total de 312 dentes. O tempo mínimo de um período de acompanhamento foi de 12 meses. A solução de irrigação mais utilizada foi o hipoclorito de sódio, para as técnicas de apexificação e revascularização. O medicamento comumente escolhido nos grupos de apexificação foi o Ca(OH)2, com pasta tripla antibiótica nos grupos de revascularização. A taxa clínica de sucesso nos grupos tratados com revascularização variou de 76% a 100%, enquanto nos grupos tratados com apexificação variou de 68% a 100%. Apenas dois estudos atingiram uma taxa de sucesso igual a 100%. Conclusões: Níveis variáveis de evidência foram observados em relação aos tratamentos. No entanto, confirmou-se que a revascularização é uma excelente opção, pois seus desfechos produzem maior ganho de espessura e comprimento radicular, além de diminuir o forame apical.

Effect of Materials For Interim Restoration on Estimation of Working Length Using Electronic Apex Locator: in vitro Study

ABSTRACT: The aim of this in vitro study was to evaluate measurement accordance using an electronic apex locator for estimation of working length in endodontics when different restorative materials for interim crown restoration are utilized. For this study, 13 single-rooted premolars with endodontic occlusal access cavity were prepared. To establish the working length of each tooth, these were mounted in alginate and with the help of an electronic foramen locator and endodontic file K-file # 15, the working length was established. This length was later compared to the estimated working lengths using different intermediate restoration materials. These materials were: Superior Chemfil, Ketac ™ Molar Easymix and Filtek z350 resin. In the electronic measurements, an acceptable tolerance range of variation up to ± 0.5 mm was considered. Highest discrepancies were considered erroneous. For these measurements, central tendency and dispersion were analyzed. The Bland-Altman method was used, and the ANOVA test with a significance level of p <0,05 for statistic difference. Regarding measurements' acceptability and the type of interim restoration material utilized, 7 were acceptable, and 6 were unacceptable for ChemFil Superior, 12 were acceptable and 1 unacceptable for Ketac™ Molar Easymix, and 11 were acceptable and 2 were unacceptable for Filtek Z350 composite resin. The average difference between all electronic measurements was 0.29 (± 0.44). Chemfill Superior showed the most prominent variation between measurements 0.58 (± 0.45). When using an electronic apex locator, measurements showed statistically significant differences depending on the interim restoration material of choice (p<0.05). In conclusion, the measurement accordance using electronic apex locator to estimation the working length is higher, however the electronic estimation of working length can be significatively affected by the material chosen for interim temporary restoration.

RESUMEN: El objetivo de este estudio in vitro, fue evaluar la concordancia de las estimaciones de longitud de trabajo mediante localizador electrónico de foramen, utilizando diferentes materiales de restauración intermedia coronaria. Para tales fines fueron preparados 13 premolares uniradiculares con cavidad de acceso oclusal endodóntico. Para establecer la a longitud de trabajo de cada diente, estos fueron montados en alginato y con la ayuda de un localizador electrónico de foramen y lima de endodoncia K-file #15 fue establecida la longitud de trabajo. Esta longitud fue comparada posteriormente con las longitudes de trabajo estimadas utilizando diferentes materiales de restauración in- termedia. Estos materiales fueron: Chemfil superior, Ketac™ Molar Easymix y resina Filtek z350. En las mediciones electrónicas, se consideró un rango de tolerancia aceptable de variación hasta ± 0,5 mm. Las discrepancias mayores se consideraron erróneas. Se calcularon medidas de tendencia central y la dispersión. Se utilizó el método de Bland- Altman y la prueba ANOVA con un nivel de significancia de p <0,05. Con respecto a la aceptabilidad de las mediciones y el tipo de material de restauración intermedia, 7 fueron aceptables y 6 fueron inaceptables para ChemFil Superior, 12 fueron aceptables y 1 inaceptable para Ketac ™ Molar Easymix, y 11 fueron aceptables y 2 fueron inaceptables para el compuesto Filtek Z350 resina. La diferencia promedio entre todas las mediciones electrónicas fue de 0,29 (± 0,44). Chemfil Superior mostró la mayor variación entre medicio- nes 0,58 (± 0,45). Las mediciones mostraron diferencias estadísticamente significativas dependiendo del material de restauración intermedio elegido (p <0,05). En conclusión, la concordancia en la estimación de la longitud de trabajo usando localizador electrónico de foramen es alta, sin embargo, puede verse afectada significativamente por el material de obturación intermedio.

Análise comparativa da precisão de medição dos localizadores apicais eletrônicos Romiapex a15® e Root zx mini®: um estudo in vitro / Comparative analysis of the measuring accuracy of the electronic apex locators Romiapex a15® and Root zx mini®: an in vitro study

Este estudo analisou a precisão de medição dos aparelhos ROMIAPEX A 15® e ROOT ZX MINI®, in vitro, comparativamente pelo método radiográfico e eletrônico no que diz respeito à precisão e confiabilidade na determinação do Comprimento Real de Trabalho (CRT) e Comprimento Real do Dente (CRD). Vinte dentes humanos (incisivos superiores e pré-molares superiores/inferiores) foram avalia das e seus CRD's e CRT's aferidos de forma direta por meio de lima tipo k nº 10 ou 15 (Dentsply Sirona, Ballaigues, Suíça), pelo método radiográfico e método eletrônico. Não foram verificadas diferenças significativas entre as medidas para CRD (p=0,003) e CRT (p=0,042) entre os métodos direto, radio gráfico e eletrônico. Ambos os métodos ficaram próximos da medida real, quando por vezes também definiram a mesma medida real. Os CRD's obtidos pelos métodos radiográfico e eletrônico foram sub metidos ao Teste t de Student (p<0,024) apontando relação estatística significativa para a verificação da odontometria, sugerindo que ambos os métodos são eficazes na determinação do comprimento real do dente quanto de trabalho. O método eletrônico apresentou eficácia satisfatória estatistica mente nos casos comparativamente aos outros métodos também avaliados. Os dados sugerem que os localizadores citados podem auxiliar as tomadas de decisões para determinação do CRD e CRT

This study analyzed the measurement accuracy of the ROMIAPEX A15® and ROOT ZX MINI® locators, in vitro, comparatively by the radiographic and electronic methods with regard to the precision and reliability in the determination of the Real Working Length (RWL) and Real Tooth Length (RTL). Twenty human teeth (upper incisors and upper/lower premolars) were evaluated it had the RTL and RWL measured through rasp k No 10/15 (Dentsply Sirona, Ballaigues, Switzerland) by radiographic and electronic methods. There were no significant differences between the measures for RTL (p = 0,003) and RWL (p = 0,042) for the methods. It means that both methods were very close to the real measure, when sometimes they also defined the same real measure. The RTL obtained by methods radiographic and electronic, were submitted to Student's t test (p <0,024), showed statistical significance in relation to the methods used for verification of odontometry, which means that both methods are effective to determine an actual length of the element and the length of actual work. The electronic method showed statistically satisfactory effectiveness in the cases compared to the other methods.The data suggest that these locators can assist decision making to determine RTL and RWL ... (AU)

Relationship between prostate apex depth and early recovery of urinary continence after laparoscopic radical prostatectomy / 北京大学学报(医学版)

OBJECTIVE@#To evaluate the relationship between recovery of urinary continence after laparoscopic radical prostatectomy (LRP) and preoperative prostate apex depth (PAD) on magnetic resonance imaging (MRI).@*METHODS@#We retrospectively analyzed 184 patients with pathologic confirmed prostate carcinoma who underwent LRP in Department of Urology, Peking University Third Hospital. All the patients received MRI examination before surgery. Membranous urethral length (MUL) was defined as the distance from the apex of prostate to the level of the urethra at penile bulb on the coronal image. PAD was defined as the distance from the apex of prostate to the suprapubic ridge line on sagittal MRI. PAD ratio (PADR) was defined as PAD/pubic height. All the patients received extraperitoneal LRP. The patients' reporting freedom from using safety pad (0 pad/d) were defined as urinary continence. Univariate and multivariate regression analyses were used to identify independent predictors of early continence recovery after LRP. Kaplan-Meier analyses and log-rank test were used to compare time to continence recovery between the groups.@*RESULTS@#For all the 184 patients, the average age was (69.0±7.7) years, the ave-rage mass index(BMI) was (25.07±3.29) kg/m2, and the pre-biopsy PSA was (16.80±21.99) g/L. For all the patients who underwent MRI preoperatively, the mean PV was (39.35±25.25) mL and the mean MUL was (14.0±3.7) mm. The mean PAD was (24.52±4.97) mm and the mean PADR was 0.70±0.14. The continence rate for all the patients after LRP was 62.0% and 96.2% in three months and one year. The patients achieving early continence recovery had significant smaller PV (P=0.049), longer MUL (P < 0.001) and higher PADR (P=0.005). Multivariate analysis revealed MUL (P < 0.001) and PADR (P=0.032) were predictors of continence recovery after LRP. Kaplan-Meier analyses and Log-rank test revealed that MUL (≥14 mm vs. < 14 mm, P < 0.001) and PADR (≥0.70 vs. < 0.70, P < 0.001), PV(< 50 mL vs. ≥50 mL, P=0.001) were all significantly associated with continence recovery.@*CONCLUSION@#MUL and PADR are independent predictors of early continence recovery after LRP. MUL, PADR and PV are significantly associated with recovery of urinary continence.

Cone-beam CT diagnosis and differential diagnosis of germinated mandibular second molar / 中国基层医药

Objective:To report a case of germinated teeth of the left mandibular second molar diagnosed by cone-beam CT (CBCT), and to investigate its differential diagnosis, pathogenesis, and the application value of CBCT in the diagnosis of oral and maxillofacial diseases.Methods:One case of germinated teeth of the left mandibular second molar diagnosed according to oral general examination ad CBCT findings in Zhenjiang Stomatological Hospital, China in March, 2019 was included in this study. The characteristics and differential points of supernumerary cusp, fused teeth, geminated teeth and concresence of teeth were analyzed based on literatures.Results:CBCT examination showed that the number of mandibular dentition teeth was normal, there was a large area of low-density transmission area around the root of the left mandibular second molar. Three-dimensional reconstruction results revealed that the suspected supernumerary teeth were fused with the root of the left mandibular second molar. Sagittal projections showed that the suspected supernumerary teeth were located in the buccal side of the left mandibular second molar. Axial projections showed three separate root canal orifices at the level of pulp chamber floor, and the dentin of the two was connected. The suspected supernumerary teeth had an independent pulp cavity and a clear root canal, and fused with the distal root canal of the left mandibular second molar in the middle of the root to form a root canal. A "Y"-shaped structure was displayed on the sagittal projections. CBCT showed that the left mandibular second molar was a fused root. Based on oral clinical examination, the left mandibular second molar was confirmed to be a germinated tooth.Conclusion:CBCT is one of the most important means of oral auxiliary examination. It has significant advantages in the diagnosis of tooth abnormalities. It can help clinicians to make correct diagnosis and choose the appropriate treatment scheme. It has certain clinical significance and innovation.

Comparison of the impacts of two kinds of brackets on external apical root resorption in orthodontic treatment of bimaxillary protrusion patients / 中国组织工程研究

BACKGROUND: In orthodontic treatment, there will be different degrees of external apical resorption. Severe root resorption will reduce the root/shoot ratio, reduce the stability of teeth, and even cause teeth to loosen and fall out. OBJECTIVE: To compare the difference of external apical root resorption between high torque self-locking bracket and traditional straight wire bracket in orthodontic treatment of bimaxillary protrusion patients. METHODS: Forty-nine patients with bimaxillary protrusion, aged 13-16 years, who were treated in the Hospital of Stomatology of Southwest Medical University from January 2016 to December 2019, were enrolled in this study. The patients were divided into the high torque self-locking bracket group (n=24) and the traditional straight wire bracket group (n=25). Cone beam CT was taken before and after orthodontic treatment. The root morphology and length of maxillary central incisors and lateral incisors were observed by CS 3D Imaging Software. The amount of external apical root resorption between maxillary incisor and lateral incisor was calculated. This study was approved by the Medical Ethics Committee of Hospital of Stomatology of Southwest Medical University. RESULTS AND CONCLUSION: (1) The two groups after orthodontic treatment had achieved a good correction effect. The course of treatment was shorter in the high torque self-locking bracket group than that in the traditional straight wire bracket group (P 0.05). In the same appliance group, the amount of external apical root resorption of the maxillary central incisors was less than the lateral incisors (P < 0.05). (4) Results indicate that compared with the traditional straight wire bracket, the high torque self-locking bracket may have the advantages of short treatment course and low risk of apical absorption in the orthodontic treatment of bimaxillary protrusion.