ABSTRACT
Objective:To explore the effects of different polymers on in vitro biomimetic mineralization of small intestinal submucosa(SIS)scaffolds,and to evaluate the physicochemical properties and bio-compatibility of the SIS scaffolds.Methods:The SIS scaffolds prepared by freeze-drying method were im-mersed in simulated body fluid(SBF),mineralized liquid containing polyacrylic acid(PAA)and mine-ralized liquid containing PAA and polyaspartic acid(PASP).After two weeks in the mineralized solu-tion,the liquid was changed every other day.SBF@SIS,PAA@SIS,PAA/PASP@SIS scaffolds were ob-tained.The SIS scaffolds were used as control group to evaluate their physicochemical properties and bio-compatibility.We observed the bulk morphology of the scaffolds in each group,analyzed the microscopic morphology by environment scanning electron microscopy and determined the porosity and pore size.We also analyzed the surface elements by energy dispersive X-ray spectroscopy(EDX),analyzed the struc-ture of functional groups by Flourier transformed infrared spectroscopy(FTIR),detected the water ab-sorption rate by using specific gravity method,and evaluated the compression strength by universal me-chanical testing machine.The pro-cell proliferation effect of each group of scaffolds were evaluated by CCK-8 cell proliferation method.Results:Under scanning electron microscopy,the scaffolds of each group showed a three-dimensional porous structure with suitable pore size and porosity,and crystal was observed in all the mineralized scaffolds of each group,in which the crystal deposition of PAA/PASP@SIS scaffolds was more regular.At the same time,the collagen fibers could be seen to thicken.EDX analysis showed that the characteristic peaks of Ca and P were found in the three groups of mineralized scaffolds,and the highest peaks were found in the PAA/PASP@SIS scaffolds.FTIR analysis proved that all the three groups of mineralized scaffolds were able to combine hydroxyapatite with SIS.All the scaf-folds had good hydrophilicity.The compressive strength of the mineralized scaffold in the three groups was higher than that in the control group,and the best compressive strength was found in PAA/PASP@SIS scaffold.The scaffolds of all the groups could effectively adsorb proteins,and PAA/PASP@SIS group had the best adsorption capacity.In the CCK-8 cell proliferation experiment,the PAA/PASP@SIS scaffold showed the best ability to promote cell proliferation with the largest number of living cells observed.Con-clusion:Compared with other mineralized scaffolds,PAA/PASP@SIS scaffolds prepared by mineralized solution containing both PAA and PASP have better physicochemical properties and biocompatibility and have potential applications in bone tissue engineering.
ABSTRACT
Femoral intertrochanteric fracture is one of the common types of fractures in the elderly. With the general improvement of medical and living standards, the number of elderly people is increasing, and the problem of osteoporosis has also become relatively prominent. Therefore, low violence can usually cause fractures in this area of the elderly, which has a significant negative impact on the quality of life of elderly patients. With the further development of medical technology and internal fixation materials, the emergence of proximal femoral nail antirotation(PFNA) has greatly improved the treatment effect of femoral intertrochanteric fractures in elderly patients. However, with the increasing number of patients treated, internal fixation failures have gradually been reported. In recent years, proximal femoral biomimetic intramedullary nail(PFBN) has been reported to have good clinical efficacy. Therefore, this article mainly elaborates on the theoretical basis, design characteristics, biomechanics, and clinical efficacy research of PFBN, providing more reference for the clinical treatment of femoral intertrochanteric fractures in elderly patients in the future.
ABSTRACT
BACKGROUND:Myocardial infarction is one of the most serious cardiovascular diseases at present,and the existing clinical treatment options such as thrombolytic therapy,percutaneous coronary intervention and coronary artery bypass grafting cannot fully restore the myocardial damage caused by ischemia.Stem cell-derived exosomes for the treatment of myocardial infarction have been a hot research topic in recent years,but the low yield of natural-derived exosomes,the difficulty and time consuming nature of obtaining them,and the poor homing effect have limited their clinical application.In this context,the construction of artificial exosomes as an alternative to natural exosomes has become an effective strategy to solve the above problems. OBJECTIVE:To expound the research status of artificial exosomes in the treatment of myocardial infarction,and classify them into two design modes:semi-artificial and full-artificial,and discuss the research progress and problems of the two modes,finally,make the evaluation and prospect of its clinical application in the future. METHODS:PubMed and CNKI were searched for relevant articles with"artificial exosomes,myocardial infarction,engineering"in Chinese,and"artificial exosome,hybrid exosome,myocardial infarction,nanoparticle,drug delivery system"in English.The focus of the search was from January 2017 to December 2022,and some of the classic forward literature was included.A preliminary selection was conducted through reading titles and abstracts.Repetitive studies,low-quality journals and irrelevant articles were excluded.Finally,73 articles were included for review. RESULTS AND CONCLUSION:(1)By semi-artificially modifying exosomes,whether it is the modification of targeting peptides,hybridization of biofilms or the assistance of magnetic substances,traditional exosome therapies with insufficient targeting and low retention rate and easy to be cleared by the reticuloendothelial system have improved the efficiency of traditional exosome therapy for myocardial infarction.However,these strategies have problems such as unclear modification efficiency,medical ethics,and biotoxicity.(2)Fully artificial bionic exosomes have a higher degree of design freedom compared to exosome modification,which can solve the problems of high extraction and storage difficulties of exosomes of natural origin and limitations of large-scale production;however,this artificial exosome strategy still lacks reliable preclinical data support and biosafety testing,and has not yet formed a standardized process required for large-scale production;therefore,before applying to the clinic,the artificial exosome solution as an alternative to natural exosomes still needs continuous in-depth research by researchers.
ABSTRACT
BACKGROUND:Polyvinylidene fluoride(PVDF)with piezoelectric properties,good biocompatibility and nontoxicity make it a suitable candidate for periosteal repair. OBJECTIVE:To evaluate the cytotoxicity of PVDF bionic periosteum by electrospinning with zinc and magnesium ions in vitro. METHODS:Pure PVDF,zinc-doped PVDF,magnesium-doped PVDF and Zinc-magnesium ion PVDF piezoelectric bionic periosteum were prepared by electrospinning technology,respectively.They were named PVDF,PVDF-Zn,PVDF-Mg and PVDF-Zn-Mg,in which the mass fraction of zinc and magnesium ions were all 1%.Osteoblasts and vascular endothelial cells were co-cultured with four groups of bionic periosteum.Cell compatibility of bionic periosteum was determined by alkaline phosphatase staining,CD31 immunofluorescence staining,and scanning electron microscopy. RESULTS AND CONCLUSION:(1)Osteoblasts:Alkaline phosphatase staining after 7 days of culture showed that the PVDF-Zn group secreted more alkaline phosphatase than the other three groups.Under a scanning electron microscopy,after 1 day of culture,the cells had a certain spread on the surface of PVDF-Mg and PVDF-Zn-Mg bionic periosteum,and the pseudopod extended to all sides.On day 3,the cell edge of each group extended pseudopods to the material.By days 5 and 7,the cells were fully spread,well grown and firmly covered the surface of the fibers,and the cellular pseudopods extended around and into the interstitial space of the fibers.CCK-8 assay showed that the cell proliferation on the bionic periosteum of each group showed an increasing trend over time and the relative proliferation rate of cells at 1,3,5,and 7 days was≥75%,and the cytotoxicity was≤grade 1.(2)Vascular endothelial cells:CD31 immunofluorescence staining for 3 days showed that the cells adhered and spread well on the bionic periosteum of each group and connected with each other,and the number of cells in the PVDF-Zn-Mg group was more than that in the other three groups.Under scanning electron microscope,the cells began to adhere to the surface of each group of fibers after 1 and 3 days of culture.On day 5,the cells were well spread on the surface of the fibers and extended obvious pseudopods.On day 7,the cells on the PVDF-Mg and PVDF-Zn-Mg bionic periosteum grew in multiple layers and extended the pseudopod into the fibrous void.CCK-8 assay showed that the cell proliferation on the bionic periosteum of each group showed a downward trend over time,and the relative proliferation rate of cells at 1,3,5 and 7 days was≥125%,and the cytotoxicity was grade 0.(3)The results showed that Zn-Mg electrospun PVDF piezoelectric bionic periosteum had good cytocompatibility.
ABSTRACT
BACKGROUND:Biomimetic design of bioactive materials to restore,maintain or improve the function of tissue based on the understanding of anatomy on the function and structure of biological tissue is a research hotspot in the field of regenerative medicine at present. OBJECTIVE:To discuss the effect of mechanical properties,three-dimensional spatial structure,and biochemical activity of biomedical scaffolds on cell behavior and review the application of biomedical scaffolds in the field of tissue engineering. METHODS:The articles published in CNKI,Wanfang,Web of Science,and PubMed databases from January 2003 to April 2023 were searched by computer.The Chinese search terms were"extracellular matrix,tissue engineering,scaffolds,biomaterials,biomimetic structures,mechanical properties,three-dimensional structures,tendon-bone interface,osteochondral,neural conduits,artificial blood vessels".English search terms were"extracellular matrix,tissue engineering,scaffolds,biomimetic structures,biomaterials,tendon bone interfaces,osteochondral,neural conduits,artificial blood vessels". RESULTS AND CONCLUSION:Cells are in a complex and dynamic three-dimensional environment,so the extracellular matrix is the ultimate target of biomaterial simulation.The bionic structure of biomedical scaffolders needs to be similar to the real microenvironment,so that cells can stick to the wall,grow and migrate normally,and maintain their diverse physiological functions.Biomimetic design of extracellular matrix in terms of mechanical properties,three-dimensional spatial structure,and biochemical properties of biomedical scaffolds can play a decisive role in tissue repair,thus affecting the final result of tissue repair.Biomimetic biomedical scaffolds have been widely used in tendon-bone interface,bone cartilage interface,nerve,vascular regeneration,and other fields,providing a promising new idea in clinical practice.
ABSTRACT
BACKGROUND:Tissue engineering is considered an ideal treatment for growth plate regeneration.However,most of the current research on regenerative tissue engineering is the traditional scaffold-based strategy.As the limitations of traditional scaffolds are gradually revealed,the research direction is gradually diversifying. OBJECTIVE:To summarize the application of scaffold-based and scaffold-free strategies in the treatment of growth plate cartilage regeneration and their respective advantages and disadvantages. METHODS:The relevant articles were searched from PubMed,Wiley,and Elsevier.The search terms were"growth plate injury,regeneration,tissue engineering,scaffold,scaffold-free,biomimetic,cartilage"in English.The time was limited from 1990 to 2023.Finally,104 articles were included for review. RESULTS AND CONCLUSION:The biomimetic strategy is to reduce the cell composition,biological signals and unique mechanical properties of each region to the greatest extent by simulating the unique organizational structure of the growth plate,so as to build a biomimetic microenvironment that can promote tissue regeneration.Therefore,the design of a biomimetic scaffold is to simulate the original growth plate as far as possible in terms of composition,structure and mechanical properties.Although some results have been achieved,there is still the problem of the unstable regeneration effect.The scaffold-free strategy believes that the limitations of scaffolds will have adverse effects on regenerative therapy.Therefore,the design of scaffold-free constructs relies as much as possible on the ability of cells to generate and maintain extracellular matrix without interfering with cell-cell signals or introducing exogenous substances.However,there are some problems,such as poor stability,low mechanical strength and greater difficulty in operation.Biomimetic strategy and scaffold-free strategy have different emphases,advantages and disadvantages,but they both have positive effects on growth plate cartilage regeneration.Therefore,subsequent studies,whether adopting a biomimetic strategy or a scaffold-free strategy,will focus on the continuous optimization of existing technologies in order to achieve effective growth plate cartilage regeneration therapy.
ABSTRACT
BACKGROUND:The appearance of the crescent sign in femoral head necrosis is a"turning point"in the progression of the disease,and repairing and stabilizing the bone-cartilage interface is particularly important in preventing further progression and collapse of the femoral head.Tissue engineering offers potential advantages in the simultaneous repair and integration of the bone-cartilage interface. OBJECTIVE:To review potentially suitable techniques addressing the subchondral separation in femoral head necrosis. METHODS:Relevant articles from January 1970 to April 2023 were searched in PubMed,Web of Science,and China National Knowledge Infrastructure(CNKI)using English search terms"femoral head necrosis,avascular necrosis of femoral head,osteonecrosis of femoral head"and Chinese search terms"femoral head necrosis,subchondral bone,cartilage,integration of cartilage and subchondral bone".A total of 114 articles were included for review and analysis. RESULTS AND CONCLUSION:(1)Structural defects,ischemic and hypoxic environment,inflammatory factors,and stress concentration may cause subchondral separation in osteonecrosis of the femoral head.Subchondral bone collapse and failure of hip-preserving surgery may be associated.Integration of tissue engineering scaffolds with the bone-cartilage interface is one potential approach for treating subchondral separation in osteonecrosis of the femoral head.(2)Current literature suggests that multiphase scaffolds,gradient scaffolds,and composite materials have shown improvements in promoting cell adhesion,proliferation,and deposition of bone and cartilage matrix.These advancements aid in the integration of scaffolds with the bone-cartilage interface and have implications for the treatment of subchondral separation in osteonecrosis of the femoral head.(3)Surface modifications of scaffolds can enhance interface integration efficiency,but they have their advantages and disadvantages.Scaffolds providing different environments can induce differentiation of mesenchymal stem cells and facilitate integration between different interfaces.(4)Future scaffolds for subchondral separation in osteonecrosis of the femoral head are expected to be composite materials with gradient and differentiated biomimetic structures.Surface modifications and stem cell loading can promote integration between the bone-cartilage interface and scaffolds for therapeutic purposes,but further experimental verification is still needed.Challenges include synchronizing scaffold degradation rate with repair progress and ensuring stability between different interfaces.
ABSTRACT
BACKGROUND:Trauma,inflammation,tumors,and other factors commonly result in tissue defects,including damage to bones,joints,skeletal muscles,and associated blood vessels and nerves.Clinically,it is often challenging to repair all the functional injuries involving these tissues,posing great challenges for clinical treatment. OBJECTIVE:To elucidate the application of 3D-printed hydrogel biomimetic structures in motor system tissue injuries. METHODS:Relevant literature published from 2003 to 2023 was retrieved from the CNKI,Wanfang Data,and PubMed databases.The Chinese and English search terms were"3D printing,hydrogel,bone,cartilage,muscle,nerve,vasculature,tissue engineering,biomimetics".After screening,induction and summary,63 relevant articles were finally included for review. RESULTS AND CONCLUSION:(1)3D-printed hydrogels can be achieved in several different ways,such as direct 3D printing,hybrid mode 3D printing,or manufacturing 3D bio-inspired structures in hydrogels by printing intermediate molds.Among these manufacturing processes,extrusion-based printing is currently the most widely used for 3D printing hydrogels with bio-inspired structures.(2)Bioprinting hydrogels enables the production of biovascular structures with complex perfusion patterns,and it can induce the formation of biologically relevant,highly organized,and intact blood vessels.(3)By utilizing bioprinting technology,it is possible to mimic the hierarchical structure and function of natural bone,combining hydrogels with different types of cells and growth factors to create tissue engineering scaffolds that closely resemble the composition and structure of natural bone,thereby facilitating better bone regeneration.(4)Neural fiber structure can be bio-inspired by incorporating different fiber materials into the 3D-printed hydrogel conduit structure.(5)Utilizing specific hydrogel formulations,it is possible to simulate muscle bundle structures or engineer muscle tissues integrating blood vessels and nerves,which can enhance the repair of volumetric muscle injuries in vivo.(6)Based on current related research,methacrylated gelatin,which closely resembles the characteristics of the extracellular matrix,is often considered as a raw material for 3D printing various tissue bio-inspired structures.Researchers also incorporate different growth factors or cells into the hydrogels for bioprinting to achieve the desired tissue repair outcomes.(7)Although there is a lack of clinical trial reports on 3D-printed hydrogel bio-inspired structures,this indicates that the clinical translation of such materials still requires a long-term process.Further improvements are needed in terms of clinical applications,as well as comprehensive in vivo safety assessments.
ABSTRACT
Nasal drug delivery efficiency is highly dependent on the position in which the drug is deposited in the nasal cavity. However, no reliable method is currently available to assess its impact on delivery performance. In this study, a biomimetic nasal model based on three-dimensional (3D) reconstruction and three-dimensional printing (3DP) technology was developed for visualizing the deposition of drug powders in the nasal cavity. The results showed significant differences in cavity area and volume and powder distribution in the anterior part of the biomimetic nasal model of Chinese males and females. The nasal cavity model was modified with dimethicone and validated to be suitable for the deposition test. The experimental device produced the most satisfactory results with five spray times. Furthermore, particle sizes and spray angles were found to significantly affect the experimental device's performance and alter drug distribution, respectively. Additionally, mometasone furoate (MF) nasal spray (NS) distribution patterns were investigated in a goat nasal cavity model and three male goat noses, confirming the in vitro and in vivo correlation. In conclusion, the developed human nasal structure biomimetic device has the potential to be a valuable tool for assessing nasal drug delivery system deposition and distribution.
ABSTRACT
Objective@#To evaluate the impact of ultra-high-molecular-weight polyethylene (UHMWPE)-Ribbond fibers, when combined with different restorative materials, on fracture resistance and marginal adaptation of isolated primary molar defects, to provide a reference for clinical practice.@*Methods@#This study was approved by the Ethics Review Committee. A total of 72 extracted primary molars with complete crowns were collected, and 66 primary molars were randomly assigned as experimental groups for the fracture resistance and microleakage tests. The molars were divided into six groups (n = 11) based on the type of restorative materials and the application of Ribbond fibers: Group A1, 3M Filtek Z250 + Ribbond; Group A2, 3M Filtek Z250; Group B1, Beautifil II LS + Ribbond; Group B2, Beautifil II LS; Group C1, 3M Filtek Bulk Fill + Ribbond; and Group C2, 3M Filtek Bulk Fill. Groups A1, B1 and C1 received the fiber-reinforcing technique, whereas Groups A2, B2 and C2 received the direct restorative technique; the remainings were in Group D (blank control group), which did not receive treatment for the fracture resistance test. The fracture resistance test was divided into six experimental groups and one blank control group (n = 6). Primary molar teeth in each experimental group were prepared with Class II cavities and filled. The fracture load of all samples was detected, and the fracture mode was analyzed after thermal cycling. The microleakage test was divided into six experimental groups, with five in each group. Class I cavities with a diameter of 3 mm and depth of 2.5 mm were prepared within the mesial and distal marginal ridges on the occlusal surface and filled for primary molars in each group. Marginal microleakage was assessed after thermal cycling.@*Results@#The fracture resistance test results showed that the fracture resistance in groups that received the fiber-reinforcing technique was greater than that in groups that received the direct restorative technique: Group A1>Group A2, Group B1>Group B2, Group C1>Group C2 (P<0.05). The application of Ribbond fibers increased fracture resistance to all tested restorative materials by 37.08% to 39.34%. The proportion of tooth frac-ture decreased significantly in groups A1, C1 compared with A2, C2, with a significant increase in the occurrence rate of “Repairable” (P<0.05). The fracture resistance in Group A1 was significantly greater than that in Group B1 and Group C1 (P<0.05). The marginal microleakage test results showed that the microleakage depth in groups that received the fiber-reinforcing technique was smaller than that in groups that received the direct restorative technique: Group A1<Group A2, Group B1<Group B2, Group C1<Group C2 (P<0.05). The microleakage depth in groups that received the fiber-reinforcing technique decreased by 53.90% to 66.96% compared to that in groups that received the direct restorative technique. The microleakage depth in Group B1 was significantly less than that in Group A1 and Group C1.@*Conclusion@#The application of Ribbond fibers combined with various restorative materials could enhance fracture resistance and diminish the microleakage depth to improve marginal adaptation.
ABSTRACT
Metastasis is the leading cause of cancer-related death. Despite extensive treatment, the prognosis for patients with metastatic cancer remains poor. In addition to conventional surgical resection, radiotherapy, immunotherapy, chemotherapy, and targeted therapy, various nanobiomaterials have attracted attention for their enhanced antitumor performance and low off-target effects. However, nanomedicines exhibit certain limitations in clinical applications, such as rapid clearance from the body, low biological stability, and poor targeting ability. Biomimetic methods utilize the natural biomembrane to mimic or hybridize nanoparticles and circumvent some of these limitations. Considering the involvement of immune cells in the tumor microenvironment of the metastatic cascade, biomimetic methods using immune cell membranes have been proposed with unique tumor-homing ability and high biocompatibility. In this review, we explore the impact of immune cells on various processes of tumor metastasis. Furthermore, we summarize the synthesis and applications of immune cell membrane-based nanocarriers increasing therapeutic efficacy against cancer metastases via immune evasion, prolonged circulation, enhanced tumor accumulation, and immunosuppression of the tumor microenvironment. Moreover, we describe the prospects and existing challenges in clinical translation.
ABSTRACT
Currently, the first-line drugs for invasive fungal infections (IFI), such as amphotericin B, fluconazole and itraconazole, have drawbacks including poor water solubility, low bioavailability, and severe side effects. Using drug delivery systems is a promising strategy to improve the efficacy and safety of traditional antifungal therapy. Synthetic and biomimetic carriers have greatly facilitated the development of targeted delivery systems for antifungal drugs. Synthetic carrier drug delivery systems, such as liposomes, nanoparticles, polymer micelles, and microspheres, can improve the physicochemical properties of antifungal drugs, prolong their circulation time, enhance targeting capabilities, and reduce toxic side effects. Cell membrane biomimetic drug delivery systems, such as macrophage or red blood cell membrane-coated drug delivery systems, retain the membrane structure of somatic cells and confer various biological functions and specific targeting abilities to the loaded antifungal drugs, exhibiting better biocompatibility and lower toxicity. This article reviews the development of antifungal drug delivery systems and their application in the treatment of IFI, and also discusses the prospects of novel biomimetic carriers in antifungal drug delivery.
Subject(s)
Antifungal Agents/therapeutic use , Drug Delivery Systems , Amphotericin B/therapeutic use , Liposomes/chemistry , Nanoparticles , Drug CarriersABSTRACT
Heterologous biomimetic synthesis of the active ingredients of traditional Chinese medicine(TCM) is a new mode of resource acquisition and has shown great potential in the protection and development of TCM resources. According to synthetic biology and by constructing biomimetic microbial cells and imitating the synthesis of active ingredients in medicinal plants and animals, the key enzymes obtained from medicinal plants and animals are scientifically designed and systematically reconstructed and optimized to realize the heterologous synthesis of the active ingredients in microorganisms. This method ensures an efficient and green acquisition of target products, and also achieves large-scale industrial production, which is conducive to the production of scarce TCM resources. Additiona-lly, the method playes a role in agricultural industrialization, and provides a new option for promoting the green and sustainable deve-lopment of TCM resources. This review systematically summarized the important progress in the heterologous biomimetic synthesis of TCM active ingredients from three research areas: biosynthesis of terpenoids, flavonoids, phenylpropanoids, alkaloids and other active ingredients, key points and difficulties in heterologous biomimetic synthesis, and biomimetic cells with complex TCM ingredients. This study facilitated the application of new generation of biotechnology and theory to the development of TCM.
Subject(s)
Animals , Medicine, Chinese Traditional , Drugs, Chinese Herbal , Biomimetics , Plants, Medicinal , AlkaloidsABSTRACT
@#Periodontitis is a widespread disease worldwide, with the primary cause of tissue loss being an immune inflammatory response mediated by bacteria. Increasing evidence has revealed a significant correlation between mitochondrial dysfunction and the occurrence and progression of periodontitis. This paper provides a review of current research on the role of mitochondrial dysfunction in the occurrence and development of periodontitis and related therapies from the perspectives of oxidative stress, inflammatory responses, and the regulation of mitochondrial homeostasis. Mitochondria are the main source and target of cellular reactive oxygen species. Mitochondrial dysfunction can generate large amounts of reactive oxygen species, exacerbating local oxidative stress in periodontal tissues and causing cell toxicity and tissue damage. Mitochondria are also the center of cellular inflammatory responses, and the positive feedback loop of inflammation induced by mitochondrial dysfunction may explain the persistent and unresolved nature of periodontitis. Biomaterials loaded with pharmacological agents show potential in restoring mitochondrial function, controlling the development of periodontitis, and promoting periodontal tissue regeneration. However, the key sites of mitochondrial dysfunction in the occurrence and development of periodontitis are not yet fully understood, and the improvement of mitochondrial function in periodontal therapy is still in the experimental stage. Future research efforts should focus on the effect of mitochondrial dysfunction on periodontal cells and explore its specific mechanism in the occurrence and progression of periodontitis in order to provide new insights into the treatment of periodontitis.
ABSTRACT
The biomimetic strategy of using the cell membrane-coated nanoparticles can retain the physical and chemical properties of the nanoparticles and show the biological characteristics of the source cell membrane, which can further enhance the role of the nanodrug in tumor treatment. A hybrid cell membrane is the fusion of two or more different types of cell membranes. A hybrid cell membrane can endow nanoparticles with multiple biofunctions derived from the source cells compared with a single cell membrane. Hybrid cell membranes provide a foundation to stimulate extensive research into multifunctional biomimetic nano-drug delivery system (NDDS), which is expected to broaden the application of biomimetic nanotechnology in drug delivery systems. In this review paper, the types of hybrid cell membrane used to construct nano-drug delivery systems, the preparation and characterization methods, and cancer treatment research progress in recent years were reviewed.
ABSTRACT
Objective To prepare a biomimetic nano carrier macrophage membrane hybrid liposome by heterozygous macrophage membrane and liposome, which could be used for the clearance and toxicity inhibition of Vibrio vulnificus hemolysin A (VvhA). Methods Macrophage membrane was extracted and hybridized with liposome by thin-film evaporation combined extrusion method. The hybridized liposome of macrophage membrane was constructed and characterized. The in vitro detoxification ability of the hybridized vector was evaluated by hemolysis test and cytotoxicity test. The detoxification ability of the vector was evaluated by mouse skin infection model. Results Anti toxoid studies in vivo and in vitro showed that the anti-hemolysis rate of macrophage membrane heterozygous liposomes in vitro reached 97.03%, which could effectively inhibit the skin ulceration in subcutaneous infected mice and make the survival rate of abdominal infected mice reach 80%. Conclusion The constructed macrophage membrane hybrid liposome had high detoxification ability, which could provide a potential solution and research basis for the prevention and treatment of Vibrio vulnificus infection.
ABSTRACT
Nanocarriers prepared from organic or inorganic materials are widely used in drug targeting system and diagnosis and treatment of disease. However, there are some problems, such as poor targeting, short circulation time in vivo and improvement in the biocompatibility. Biomimetic nanocarriers has carried out research on the issues, which based on different kinds of cell membrane for the nanocarriers modification, endogenous biofilm improving the biocompatibility of carriers in vivo, more accurate targeting, and even producing immunotherapeutic effect. The principle, method, targeting mechanism and therapeutic effect of biomimetic nano carrier technology of cell membrane have been reviewed in this paper, which provide a new direction for the research of new drug delivery system.
ABSTRACT
Objective:To investigate whether the antibacterial copper sulfide (CuS)/graphene oxide (GO) nanosheets composite film can promote angiogenesis and osteogenesis in vitro. Methods:GO and CuS/GO nanosheets were synthesized and mixed into polyvinyl alcohol (PVA)/carboxymethyl cellulose (CMC) hydrogel films. The study was conducted in 4 groups: PVA/CMC/GO, PVA/CMC/CuS/GO, PVA/CMC (only PVA/CMC-based film) and blank control (no material). The PVA/CMC, PVA/CMC/GO and PVA/CMC/CuS/GO films were characterized by electron scanning microscopy and energy dispersive spectrometer. The biocompatibility of different films (PVA/CMC/CuS/GO films with concentrations of CuS/GO nanotablets of 0, 50, 100, 200, 400, and 800 μ g/mL) was evaluated by CCK-8, live/dead cell staining, and hemolysis test. The angiogenesis was evaluated by cell migration and tube forming test in vitro. Alkaline phosphatase and alizarin red staining were used to evaluate osteogenesis in vitro, and the expression of osteogenic genes was measured by immunofluorescence staining and RT-qPCR. In addition, the bacterial plate counting method and bacteriostatic circle method were used to evaluate the antibacterial activity of films. Results:In the PVA/CMC/GO and PVA/CMC/CuS/GO groups, the surface of the PVA/CMC-based film was smooth and flat whereas the nanosheets composite films were irregularly flaky and convex. The biosafety experiments showed that the PVA/CMC-based film composited with GO or CuS/GO nanosheets at the concentration of 100 μg/mL had good biocompatibility. The results of angiogenesis in vitro showed that the migration ratio of HUVEC cells in the PVA/CMC/CuS/GO group was significantly better than those in the PVA/CMC/GO, PVA/CMC and control groups ( P<0.001). In the experiment of tube forming area and length, the PVA/CMC/CuS/GO group was significantly better than the PVA/CMC/GO, PVA/CMC and control groups ( P<0.001). The osteogenic differentiation in vitro displayed that the alkaline phosphatase and alizarin red staining of MC3T3-E1 cells in the PVA/CMC/CuS/GO group were significantly better than those in the PVA/CMC/GO, PVA/CMC and control groups ( P<0.001). In addition, the fluorescence intensity of immunofluorescence staining in alkaline phosphatase and type Ⅰcollagen on MC3T3-E1 cells, and the mRNA expression levels of osteogenic related genes including alkaline phosphatase, bone morphogenetic protein 2, osteocalcin and osteopontin in the PVA/CMC/CuS/GO group were significantly higher than those in the PVA/CMC/GO, PVA/CMC and control groups ( P<0.001). The antibacterial assay showed that the PVA/CMC/CuS/GO group had a significantly greater antibacterial activity and a significantly larger inhibition zone against Gram-positive bacteria and Gram-negative bacteria than the PVA/CMC/GO, PVA/CMC and control groups ( P< 0.001). Conclusions:PVA/CMC films composited with GO or CuS/GO nanosheets demonstrate ideal biocompatibility and antibacterial properties which promote angiogenesis and osteogenic differentiation in vitro. In particular, antibacterial PVA/CMC/CuS/GO composite films with the coupling function of angiogenesis and osteogenesis are expected to provide a new strategy for infectious bone defects.
ABSTRACT
Lung is susceptible to external disturbance, resulting in a variety of acute and chronic lung diseases. Functionalized nanoparticles as carriers can carry drugs through multiple biological barriers of lung into lung lesions, but there are some problems such as poor targeting and low therapeutic efficiency. As a drug carrier, membrane-coated biomimetic nanoparticles have the characteristics of immune system escape, active targeting, inflammatory chemotaxis and crossing physiological barriers due to the retention of the characteristics of the source cells. Therefore, it has been widely used in the treatment of lung diseases in recent years. In this review, the application of membrane-coated biomimetic nanoparticles in the treatment of lung diseases in the recent years was summarized and classified. Cell membrane sources include erythrocyte membrane, platelet membrane, macrophage membrane, neutrophil membrane, lung epithelial membrane, lung surfactant, endothelial membrane, cancer cell membrane, bacterial membrane, hybrid membrane and so on. The purpose of this review is to provide a new idea for treating lung diseases with membrane-coated biomimetic nanoparticles.
ABSTRACT
Brain delivery of drugs remains challenging due to the presence of the blood-brain barrier (BBB). With advances in nanotechnology and biotechnology, new possibilities for brain-targeted drug delivery have emerged. Biomimetic nano drug delivery systems with high brain-targeting and BBB-penetrating capabilities, along with good biocompatibility and safety, can enable 'invisible' drug delivery. In this review, five different types of biomimetic strategies are presented and their research progress in central nervous system disorders is reviewed. Finally, the challenges and future prospects for biomimetic nano drug delivery systems in intracerebral drug delivery are summarized.