ABSTRACT
Objective To explore the distribution and structure of pancreatic ducts and lobules in human pancreas and explore their clinical application value. Methods Three human pancreatic specimens were dissected, 2 of which were fresh whole pancreas samples which were collected from the donated human bod)' after dead,UW organ preservation solution was immediately perfused, and the pancreatic duct was rinsed at low pressure. The surface and internal structure of 1 case was observed as a fixed specimen. Paraffin sections were taken for HE staining to observe the structure of lobules and the distribution of catheters in the leaves. Results The gross specimen showed that the pancreas was composed of lobules of different sizes, with thin layers of connective tissue between the lobules. The pancreatic duct had a complete cast structure and could be clearly displayed to the main duct and the branches of the interlobular duct. The diameters of the interlobular ducts varied widely, and finally a main trunk flowed into the main duct. Each trunk was distributed independently, and the distal pancreatic duct formed a lobule-like structure with different sizes of lobules and no interlobular communication. HE staining showed that the pancreatic lobules were surrounded by connective tissue, in which vascular and ductal structures were visible. Intralobular duct could also be observed in the pancreatic lobules. Conclusion The cast specimen of the human pancreatic duct can clearly show the branch distribution of the pancreatic duct, and the study of the morphological of the pancreatic duct and lobular structure is of great reference value for understanding the clinical problems.
ABSTRACT
Objective To improve the success rate of crystal embedding of human (animal) pipeline cast specimens for long-term preservation and application of cast specimens better. Methods The selection of embedding mold, specimen fixation, adjustment of the proportion of glue, grinding and polishing were improved, and a crystal embedding model of a fetal lung duct cast specimen was made to explore and optimize the simple and efficient production process of a crystal-embedded human (animal) pipeline casting specimen. Results The crystal model produced after the improvement had great transparency, beautiful shape, no bubbles, and no mold branches broken. The distribution and running of the casted branches of the fetal lung of the crystal model could be observed clearly in the embedded middle fetal lung through any angle and orientation, which was consistent with the cast specimens before embedding, and had a strong sense of three-dimensional space. Conclusion The improved process is better for embedding human (animal) pipeline casting specimens, which is conducive to long-term preservation. It is better for clinical anatomy teaching and exhibition in life science museum.
ABSTRACT
SUMMARY: A comparative study of the morphology of suboccipital cavernous sinus (SCS) using MRI and cast specimens was performed. The present retrospective study analysed the craniocervical magnetic resonance venography (MRV) imaging data of 61 patients. Three-dimensional reconstruction was performed using Mimics 19.0. The SCS left-right diameter(d1), distance from the midline (d2), supero-inferior diameter(d3), anteroposterior diameter (d4), distance from posterior diameter to skin (d5), and diameter of the SCS at different parts (d6-d8) were measured. Comparison between MRV images and cast specimens, the SCS, marginal sinus, anterior condylar vein, and vertebral artery venous plexus were symmetrical and could be bilaterally displayed, whereas the presence of extra condylar vein and posterior condylar vein exhibited different types. The adjacency between the SCS and its communicating vessels and changes in its communicating vessels corresponded well with the MRV images and cast specimens. Many types of the presence of left and right lateral condylar and posterior condylar veins were found in the cast specimens, which could be divided into the bilateral presence of posterior condylar and lateral condylar veins, unilateral presence of posterior condylar veins, and unilateral presence of lateral condylar vein. A total of 61 cases analysed using MRV images revealed the bilateral presence of posterior condylar and lateral condylar veins (77.1 %), the unilateral presence of posterior condylar vein (18.0 %), and the unilateral presence of lateral condylar vein (9.8 %), of which the bilateral presence of posterior condylar and lateral condylar veins accounted for the largest proportion. MRV images and cast specimens of the SCS showed its normal morphological structure and adjacency, thus providing accurate and complete Three-dimensional imaging anatomical data of the SCS and its communicating vascular structures. This study enriches the Chinese SCS imaging anatomy data and may be valuable in clinical practice.
RESUMEN: Se realizó un estudio comparativo de la morfología del seno cavernoso suboccipital (SCS) mediante resonancia magnética y muestras de yeso. El presente estudio retrospectivo analizó los datos de imágenes de venografía por resonancia magnética (RNM) craneocervical de 61 pacientes. La reconstrucción tridimensional se realizó con Mimics 19.0. Se midió: el diámetro izquierdo-derecho del SCS (d1), la distancia desde la línea mediana (d2), el diámetro superoinferior (d3), el diámetro anteroposterior (d4), la distancia desde el diámetro posterior hasta la piel (d5) y el diámetro del SCS en diferentes partes (d6-d8). En la comparación entre las imágenes RNM y las muestras de yeso, el SCS, el seno marginal, la vena condilar anterior y el plexo venoso de la arteria vertebral eran simétricos y se observaron bilateralmente, mientras que la presencia de la vena extracondilar y la vena condilar posterior presentaba tipos diferentes. La proximidad del SCS y sus vasos comunicantes y los cambios en sus vasos comunicantes se correspondieron bien con las imágenes de RNM y los especímenes moldeados. Se encontraron muchos tipos de venas condilares laterales y condilares posteriores izquierda y derecha en las muestras de yeso, que podrían dividirse en presencia bilateral de venas condilares posteriores y condilares laterales, presencia unilateral de venas condilares posteriores y presencia unilateral de venas condilares laterales. Un total de 61 casos analizados mediante imágenes MRV revelaron la presencia bilateral de venas condilares posteriores y condilares laterales (77,1 %), la presencia unilateral de venas condilares posteriores (18,0 %) y la presencia unilateral de venas condilares laterales (9,8 %) de los cuales la presencia bilateral de las venas condilar posterior y condilar lateral representó la mayor proporción. Las imágenes de RNM y las muestras de yeso del SCS mostraron su estructura morfológica y adyacencia normales, lo que proporcionó datos anatómicos de imágenes tridimensionales precisos y completos del SCS y sus estructuras vasculares comunicantes. Este estudio enriquece los datos de anatomía de imágenes de SCS chino y puede ser valioso en la práctica clínica.
Subject(s)
Humans , Cavernous Sinus/anatomy & histology , Cavernous Sinus/diagnostic imaging , Calcium Sulfate , Magnetic Resonance Imaging , Retrospective Studies , Printing, Three-DimensionalABSTRACT
Objective To investigate the anatomical structure of arterial vessels in the head and neck of miniature pigs and the related application of vascular cast specimens,and the technology of three-dimensional model reconstruction by CT imaging. Methods A vascular cast specimen of a miniature pig head and neck was made by a 128-slice spiral CT scanning,and a three-dimensional model of the arterial vessels in the head and neck of the miniature pig was reconstructed. Results The cast specimen clearly showed the distribution and running characteristics of the arteries in the head and neck of a miniature pig. The three-dimensional digital model was realistic and stereoscopic,showing the running and distribution of arteries from multiple angles and layers. Conclusions The distribution and running characteristics of arterial vessels in the head and neck of a miniature pig have been investigated by the combination of cast specimen and three-dimensional digital model,providing a morphological reference for the establishment of pig cerebrovascular models in respects of both solid specimen and virtualized model.
ABSTRACT
Objective To explore the method and significance for constructing three-dimensional visual model in bronchial tree of pig lung. Methods A set of pig lung specimen was infused with epoxy resin-lead oxide through the trachea,and then casted. The Mimics 15. 0 was used to construct three-dimensional visual model in bronchial tree of pig lung by utilizing CT data of the cast specimen. Results In the reconstructed three-dimensional visual model of bronchial tree,the three-dimensional effect was realistic. This model not only clearly showed each lobar direction and distribution of bronchial tree,but also allowed three-dimensional arbitrary scaling,shifting or rotating at any angle, and the diameter and distance of each lobar bronchus could be measured with the sofeware. Conclusion The three-dimensional visual model in bronchial tree of pig lung can be successfully reconstructed from the CT dataset by using related sofeware like Mimics,which can bring morphological reference to anatomical teaching and will be helpful to the development of virtual operation.