ABSTRACT
Titanium mesh cage is one of the fusion devices used in anterior cervical corpectomy and fusion (ACCF). It can not only immediately rebuild the stability of cervical spine during the operation, maintain the height and physiological curvature of intervertebral vertebrae, but also avoid the complications of bone donor area caused by autologous bone extraction. Therefore, titanium mesh cage has become the most commonly used internal plant in ACCF. However, there exist many problems in traditional titanium cage, such as stress shielding and titanium cage sinking, which will affect the surgical effect to a certain extent, and even lead to serious postoperative complications requiring revision surgery. At present, a variety of new titanium cages have been invented, which can solve the problems caused by traditional titanium cage to a certain extent. Biomechanical evaluation and its testing methods are an indispensable process for judging whether a new type of spinal fusion cage can be used in clinical practice. This article reviews the biomechanical studies related to cervical spine anatomy, the biomechanical properties of traditional titanium cages and new titanium cages, so as to provide new ideas for the improvement of traditional titanium cages and the development of new titanium cages.
ABSTRACT
@#Complications in the form of esophageal injury, tracheal injury, injury to carotids, implant failure, loosening of screws, etc do occur after anterior cervical surgeries. Although intra-operative esophageal injuries are as such rare, there have been few reports of delayed esophageal perforation as well after anterior cervical surgeries. We report a very rare case of migration of missing screw from anterior cervical plate after anterior cervical corpectomy and plating, which had ultimately migrated down to colon and had to be removed via colonoscopy. Along with removal of migrated screw from colon, revision of failed anterior cervical surgery was done wherein plate and screws were removed with mesh cage left in-situ as it was snug-fit while pharyngeophageal perforation was explored and was found to be spontaneously healing, with addition of posterior Bohlman’s interspinous wiring for added stability. Migration of screw from the anterior cervical plate into the colon although very rare, should be always kept in mind and its potentially serious complications. We also conclude that particular attention should be given to elderly people with poor bony quality who have high chances of implant failure, along with attention to proper cage size, screw position and proper locking of the screw to further lessen the chances of implant failure.
ABSTRACT
OBJECTIVE@#To explore the clinical effects of anterior cervical discectomy with fusion (ACDF) and anterior cervical corpectomy with fusion (ACCF) in treating adjacent two-segment cervical spondylotic myelopathy (CSM).@*METHODS@#The clinical data of 37 patients with adjacent two segment CSM treated from January 2016 to December 2017 were retrospectively analyzed, including 15 males and 22 females, aged from 43 to 69 years old with an average of 54.6 years. The patients were divided into ACDF group (group A, =17) and ACCF group (group B, =20) according to the different surgery. The operation time and intraoperative blood loss were recorded;the Cobb angle and cervical curvature in the cervical fusion segments before surgery and 1, 12 months after surgery were observed;Japanese Orthopaedic Association (JOA) score was used to evaluate the surgical efficacy, and the postoperative complications were analyzed.@*RESULTS@#All patients were followed up for 12 to 24 months with an average of 18.5 months. Operation time and intraoperative blood loss in group A were (106.3±22.6) min, (52.2±26.4) ml, respectively, while were (115.6±16.8) min, ( 61.7±20.7) ml in group B. There was no statistically significant in operation time between two groups(>0.05);intraoperative blood loss in group B was larger than group A(0.05). At the final follow up, in group A, dysphagia occurred in 2 cases, cage displacement in 1 case, and no titanium plate screw loose was found;and in group B, dysphagia occurred in 4 cases, titanium mesh collapse in 2 cases, titanium plate screw loose in 1 case.@*CONCLUSION@#Two types of anterior cervical decompression and fusion for the treatment of two segment cervical spondylotic myelopathy can effectively decompress and improve the Cobb angle and cervical curvature of the affected vertebra. The ACDF surgical procedure can directly removethe compressive thing at intervertebral level, which will lead to little vertebral body damage and favorably recovered cervical curvature. The ACCF surgical procedure has a large operation space, which can easily remove the posterior vertebral osteophyte and the calcified posterior longitudinal ligament. Long-term follow-up shows that ACDF and ACCF have good surgical procedures, mature technology, and close efficacy.
Subject(s)
Adult , Aged , Female , Humans , Male , Middle Aged , Cervical Vertebrae , General Surgery , Diskectomy , Retrospective Studies , Spinal Cord Diseases , General Surgery , Spinal Fusion , Spondylosis , General Surgery , Treatment OutcomeABSTRACT
<p><b>OBJECTIVE</b>To study the change trend of cervical range of motion(ROM) after single-level anterior cervical corpectomy and fusion(ACCF) in treating cervical spondylotic myelopathy.</p><p><b>METHODS</b>The clinical data of 23 patients with cervical spondylotic myelopathy was retrospectively analyzed from February 2015 to April 2016. There were 11 males and 12 females, with an average age of (54.6±13.3) years. All the patients were diagnosed as cervical spondylotic myelopathy by interrogation, physical examination and radiology, and were treated by ACCF. The Coda motion system was applied to assess the cervical range of motion pre-and post-operation. JOA and VAS scores were used to evaluate the clinical outcomes.</p><p><b>RESULTS</b>The mean follow-up time was (9.4±1.6) months. Cervical ROM in all directions at 3 months postoperatively were significantly lower except for the left rotation(<0.05). There was significant difference of cervical ROM in all directions between preoperative and 6 months postoperatively(>0.05). The right lateral bending and the left rotation at 9 months postoperatively increased significantly(<0.05). Postoperative extension at 6 months was significantly better than that of 3 months postoperatively(<0.05). The extension, left and right lateral bending and left rotation at 9 months postoperatively were significantly better than of 6 months postoperatively(<0.05). Postoperative JOA scores at each time points were significantly higher than that of preoperative(<0.05) and VAS scores at each time points were significantly lower than that of preoperative(<0.05).</p><p><b>CONCLUSIONS</b>The change trend of three-dimensional cervical ROM after single-level ACCF revealed that the ROM decreased in short term, and later increased and was better than the preoperative level. Meanwhile, the neurological function improved significantly. But the short-term and long-term change trend of ROM postoperatively and the change trend of ROM after multi-level ACCF need to be further studied.</p>
ABSTRACT
<p><b>OBJECTIVE</b>To compare the clinical effects between anterior cervical discectomy and fusion(ACDF) combined with anterior cervical corpectomy and fusion(ACCF) and cervical posterior single open-door laminoplasty with mini-titanium plate fixation in treating three-segment cervical spondylotic myelopathy.</p><p><b>METHODS</b>The clinical data of 63 patients (39 males and 24 females) with three-segment cervical spondylotic myelopathy underwent surgical treatment from March 2014 to March 2016 were retrospectively analyzed. Among them, 43 cases were treated by ACDF combined with ACCF(anterior group), and 20 cases were treated by cervical posterior single open-door laminoplasty with mini-titanium plate fixation(posterior group). Operative time, intraoperative blood loss, postoperative complications were compared between two groups. And according to JOA score to evaluate the clinical effect.</p><p><b>RESULTS</b>All the patients were follow-up from 16 to 40 months with an average of 25.8 months. Operative time of anterior group and posterior group were (123.70±6.21) min and(118.70±5.41) min, respectively, there was no significant difference between two groups(>0.05). Intraoperative blood loss of anterior group and posterior group were (85.23±7.51) ml and (107.18±9.41) ml, respectively, there was significant difference between two groups(<0.05). In anterior group, axial symptoms occurred in 6 cases, dysphagia in 1 case, and no C₅ nerve root palsy, hoarseness and choking cough were found, the incidence rate of complication was 16.3%(7/43); and in posterior group, axial symptoms occurred in 5 cases, C5 nerve root palsy in 1 case, and no dysphagia, hoarseness and choking cough were found, the incidence rate of complication was 30.0%(6/20); there was significant defference in incidence rate of complication between two group(<0.05). At 1 week after operation and final follow-up, the JOA scores of anterior group were obviously better than that of posterior group(<0.05).</p><p><b>CONCLUSIONS</b>Above-mintioned two surgical treatment for cervical spondylotic myelopathy can provide instantly stability, the method of ACDF combined with ACCF was obviously better that of the method of cervical posterior single open-door laminoplasty in intraoperative blood loss, the incidence rate of complications, clinical effect.Thus, for the treatment of three-segment cervical spondylotic myelopathy, the method of ACDF combined with ACCF would be firstly chosen.</p>
ABSTRACT
Cervical corpectomy is a viable technique for the treatment of multilevel cervical spine pathology. Despite multiple advances in both surgical technique and implant technology, the rate of construct subsidence can range from 6% for single-level procedures to 71% for multilevel procedures. In this technical note, we describe a novel technique, the bump-stop technique, for cervical corpectomy. The technique positions the superior and inferior screw holes such that the vertebral bodies bisect them. This allows for fixation in the dense cortical bone of the endplate while providing a buttress to corpectomy cage subsidence. We then discuss a retrospective case review of 24 consecutive patients, who were treated using this approach, demonstrating a lower than previously reported cage subsidence rate.
Subject(s)
Humans , Pathology , Retrospective Studies , SpineABSTRACT
Objective To establish the three-dimensional finite element model of human lower cervical spine C3-7 motion segments after anterior cervical corpectomy and fusion (ACCF) surgery with titanium mesh and bone graft,and to analyze the stability of cervical spine and stress distribution of internal fixation devices after ACCF surgery.Methods The finite element model of cervical spine C3-7 segments after ACCF of C5 segment with titanium mesh,bone graft,plate and screw fixation was established,and C3-7 segment intact model of cervical vertebra was also constructed.The torque moment of 0.5,1.0,1.5,2.0 N · m was applied to the ACCF surgery model.The ROM,maximum stress in facet joint and stress distributions on internal fixation devices under flexion,extension,lateral bending and axial rotation movement were analyzed.Results ROM of reconstructed C5 segment increased with the torque moment increasing after ACCF surgery.In the case of 1.0 N · m tomue moment and 50 N preload,the ROM of reconstructed C5,C3-4,C6-7 and C3-7 segment was reduced by 81％,62％,58％ and 80％ compared with the intact model.The maximum stress in facet joint of reconstructed C5 segment reduced and the stress in adjacent segments significantly increased.The stress of titanium mesh was mainly distributed on the compression side of movement,and high stress was located in the roots of screws.Conclusions ACCF surgery can promote the stability of cewical spine,decrease the stress in facet joint of operation segment,and has better treatment effect on easing compression from spinal cord caused by cervical spondylotic myelopathy.The research results will provide some theoretical basis for clinical application of ACCF surgery.
ABSTRACT
Objective To establish the three-dimensional finite element model of human lower cervical spine C3-7 motion segments after anterior cervical corpectomy and fusion (ACCF) surgery with titanium mesh and bone graft,and to analyze the stability of cervical spine and stress distribution of internal fixation devices after ACCF surgery.Methods The finite element model of cervical spine C3-7 segments after ACCF of C5 segment with titanium mesh,bone graft,plate and screw fixation was established,and C3-7 segment intact model of cervical vertebra was also constructed.The torque moment of 0.5,1.0,1.5,2.0 N · m was applied to the ACCF surgery model.The ROM,maximum stress in facet joint and stress distributions on internal fixation devices under flexion,extension,lateral bending and axial rotation movement were analyzed.Results ROM of reconstructed C5 segment increased with the torque moment increasing after ACCF surgery.In the case of 1.0 N · m tomue moment and 50 N preload,the ROM of reconstructed C5,C3-4,C6-7 and C3-7 segment was reduced by 81％,62％,58％ and 80％ compared with the intact model.The maximum stress in facet joint of reconstructed C5 segment reduced and the stress in adjacent segments significantly increased.The stress of titanium mesh was mainly distributed on the compression side of movement,and high stress was located in the roots of screws.Conclusions ACCF surgery can promote the stability of cewical spine,decrease the stress in facet joint of operation segment,and has better treatment effect on easing compression from spinal cord caused by cervical spondylotic myelopathy.The research results will provide some theoretical basis for clinical application of ACCF surgery.
ABSTRACT
Objective To establish the three-dimensional finite element model of human lower cervical spine C3-7 motion segments after anterior cervical corpectomy and fusion (ACCF) surgery with titanium mesh and bone graft, and to analyze the stability of cervical spine and stress distribution of internal fixation devices after ACCF surgery. Methods The finite element model of cervical spine C3-7 segments after ACCF of C5 segment with titanium mesh, bone graft, plate and screw fixation was established，and C3-7 segment intact model of cervical vertebra was also constructed. The torque moment of 0.5, 1.0, 1.5, 2.0 N﹒m was applied to the ACCF surgery model. The ROM, maximum stress in facet joint and stress distributions on internal fixation devices under flexion, extension, lateral bending and torsion movement were analyzed. Results ROM of reconstructed C5 segment increased with the torque moment increasing after ACCF surgery. In the case of 1.0 N﹒m torque moment and 50 N preload, the ROM of reconstructed C5, C3-4, C6-7 and C3-7 segment was reduced by 81%, 62%, 58% and 80% compared with the intact model. The maximum stress in facet joint of reconstructed C5 segment reduced and the stress in adjacent segments significantly increased. The stress of titanium mesh was mainly distributed on the compression side of movement, and high stress was located in the roots of screws. Conclusions ACCF surgery can promote the stability of cervical spine, decrease the stress in facet joint of operation segment, and has better treatment effect on easing compression from spinal cord caused by cervical spondylotic myelopathy. The research results will provide some theoretical basis for clinical application of ACCF.
ABSTRACT
Objective To establish the three-dimensional finite element model of human lower cervical spine C3-7 motion segments after anterior cervical corpectomy and fusion (ACCF) surgery with titanium mesh and bone graft,and to analyze the stability of cervical spine and stress distribution of internal fixation devices after ACCF surgery.Methods The finite element model of cervical spine C3-7 segments after ACCF of C5 segment with titanium mesh,bone graft,plate and screw fixation was established,and C3-7 segment intact model of cervical vertebra was also constructed.The torque moment of 0.5,1.0,1.5,2.0 N · m was applied to the ACCF surgery model.The ROM,maximum stress in facet joint and stress distributions on internal fixation devices under flexion,extension,lateral bending and axial rotation movement were analyzed.Results ROM of reconstructed C5 segment increased with the torque moment increasing after ACCF surgery.In the case of 1.0 N · m tomue moment and 50 N preload,the ROM of reconstructed C5,C3-4,C6-7 and C3-7 segment was reduced by 81％,62％,58％ and 80％ compared with the intact model.The maximum stress in facet joint of reconstructed C5 segment reduced and the stress in adjacent segments significantly increased.The stress of titanium mesh was mainly distributed on the compression side of movement,and high stress was located in the roots of screws.Conclusions ACCF surgery can promote the stability of cewical spine,decrease the stress in facet joint of operation segment,and has better treatment effect on easing compression from spinal cord caused by cervical spondylotic myelopathy.The research results will provide some theoretical basis for clinical application of ACCF surgery.
ABSTRACT
Objective To investigate the effect of anterior cervical discectomy and interbody fusion ( ACDF) combined with titanium plate fixation technique and subtotal vertebrectomy and fusion and titanium plate internal fixation operation ( ACCF) on adjacent segmental cervical spondylotic myelopathy. Methods 76 patients with double segment spondylotic cervical myelopathy were randomly divided into AC-CF group and ACDF group,the relevant indicators of operation period,spinal cord function,anteroposterior and lateral of cervical spine and flexion-extension dynamic radiographs were observed,the Cobb’ s angle and fusion segmental height and bone fusion were recorded. Results The operation related index results showed that the operation time,bleeding volume and hospitalization time of patients in ACDF were less than those in ACCF group (P 0. 05). The postoperative Cobb’s angle degree of ACDF group is better than that of AC-CF group (P<0. 05). Conclusion The effect of ACCF and ACCF on the treatment of two-level CSM were satisfactory,of which ACDF has the advantages of short operation time,less bleeding,fusion segments of Cobb’ s angle and fewer complications.
ABSTRACT
STUDY DESIGN: A retrospective study was undertaken to delineate the characteristics of non-traumatic sequestrated epidurally migrated cervical disc prolapse. PURPOSE: To present first case series of eight such cases diagnosed preoperatively and to discuss their magnetic resonance imaging (MRI) characteristics and their management. OVERVIEW OF LITERATURE: Non-traumatic spontaneous migration of the sequestrated disc fragment epidurally behind cervical vertebral body is rare. Only ten cases have been reported in literature. METHODS: Detailed clinico-radiological profiles of these 8 cases are presented. In six cases their clinical picture was suggestive of cervical myelopathy. MRI scan showed single level epidural migrated disc behind body of C4, C6, and C7 in six patients and two cases with multiple levels (C5-C6). In six cases, anterior corpectomy with excision of the disc was performed and the seventh patient underwent dorsal laminectomy. The eighth patient chose not to undergo surgery. RESULTS: T1 images of the MRI scan showed an isointense signal in all the 8 cases. T2 images revealed a varying intensity. In six cases who underwent anterior corpectomy, there was a rent in the posterior longitudinal ligament. Among those in two cases multiple disc fragments were seen. In the rest four cases, a single large fragment was observed. These patients improved after anterior corpectomy and disc excision. There was no improvement in the patient who had undergone dorsal laminectomy. The eighth patient who refused surgery progressively deteriorated. CONCLUSIONS: We opine that MRI scan especially T1 images are useful in these cases. We prefer to treat these cases through anterior corpectomy with excision of the sequestrated disc which proved to result in excellent outcome.
Subject(s)
Humans , Laminectomy , Longitudinal Ligaments , Magnetic Resonance Imaging , Retrospective Studies , Spinal Cord DiseasesABSTRACT
OBJECTIVE: Anterior cervical corpectomy with fusion (ACF) or laminoplasty may be associated with substantial number of complications for treating multilevel cervical ossification of the posterior longitudinal ligament (OPLL) with significant cord compression. For more safe decompression and stabilization in multilevel cervical OPLL with prominent cord compression, we propose circumferential cervical surgery (selective ACF and laminoplasty) based on our favorable experience. METHODS: Twelve patients with cervical myelopathy underwent circumferential cervical surgery and all patients showed multilevel OPLL with signal change of the spinal cord on magnetic resonance imaging (MRI). A retrospective review of clinical, radiological, and surgical data was conducted. RESULTS: There were 9 men and 3 women with mean age of 56.7 years and a mean follow up period of 15.6 months. The average corpectomy level was 1.16 and laminoplasty level was 4.58. The average Japanese Orthopedic Association score for recovery was 5.1 points and good clinical results were obtained in 11 patients (92%) (p < 0.05). The average space available for the cord improved from 58.2% to 87.9% and the average Cobb's angle changed from 7.63 to 12.27 at 6 months after operation without failure of fusion (p < 0.05). Average operation time was 8.36 hours, with an estimated blood loss of 760 mL and duration of bed rest of 2.0 days. There were no incidences of significant surgical complications, including wound infection. CONCLUSION: Although the current study examined a small sample with relatively short-term follow-up periods, our study results demonstrate that circumferential cervical surgery is considered favorable for safety and effectiveness in multilevel OPLL with prominent cord compression.
Subject(s)
Female , Humans , Male , Asian People , Bed Rest , Decompression , Follow-Up Studies , Incidence , Longitudinal Ligaments , Magnetic Resonance Imaging , Orthopedics , Retrospective Studies , Spinal Cord , Spinal Cord Diseases , Spinal Cord Ischemia , Wound InfectionABSTRACT
OBJECTIVE: The clinical and radiographic success of a two-level discectomy and autologous iliac bone fusion with anterior cervical plate fixation (ACDFP) was compared with that of a one-level corpectomy and fusion using a titanium mesh cage (corpectomy) for the treatment of degenerative cervical disc disease. METHODS: From January 2004 to December 2007, there were 45 consecutive cases of two disc level degenerative cervical disc disease treated with either ACDFP or corpectomy. The medical records and radiological studies were reviewed, retrospectively. The clinical outcomes were measured using Odom's criteria. The radiologic assessment was performed using images showing the lordosis and bony fusion. RESULTS: Twenty-seven patients were treated with ACDFP. Eighteen patients were treated with corpectomy. The clinical outcome was excellent or good in 25 cases (93%) and 17 cases (94%) treated with ACDFP and corpectomy, respectively. The fusion rate was 96% and 94% for ACDFP and corpectomy, respectively. There was a slight increase in the cervical lordosis in both groups, but there was no significant difference between the 2 groups. There were no irriversible complications in both groups. Reversible complications were encountered in 1 case of corpectomy, and 7 cases of ACDFP, which were mainly associated with donor site. CONCLUSION: Either a ACDFP or a corpectomy provides good clinical outcome and similar bone fusion rates for degenerative disc diseases. However, absence of donor site complications makes a corpectomy better than ACDFP.
Subject(s)
Animals , Humans , Diskectomy , Lordosis , Medical Records , Retrospective Studies , Tissue Donors , TitaniumABSTRACT
OBJECTIVE: The objective of this study was to validate the effects of a titanium mesh cage and dynamic plating in anterior cervical stabilization after corpectomy. METHODS: A retrospective study was performed on 31 consecutive patients, who underwent anterior cervical reconstruction with a titanium mesh cage and dynamic plating, from March 2004 to February 2006. Twenty-four patients had 1-level and 7 had 2-level corpectomies. Ten patients underwent surgery with a cage of 10-mm diameter and 21 with 13-mm diameter. Neurological status and outcomes were assessed according to Odom's criteria. Sagittal angle, coronal angle, settling ratio, sagittal displacement, and cervical lordosis were used to evaluate the radiological outcomes. RESULTS: In overall, 26 (83.9%) of 31 showed excellent or good outcomes. Thirteen percent (4 cases) of the patients developed surgical complications, such as hoarseness, transient dysphagia, or nerve root palsy. Seven (22.6%) patients had reconstruction failure : 5 (20.8%) in the 1-level corpectomy group and 2 (28.5%) in the 2-level corpectomy group. Revisions were required in 2 patients with plate pullout due to significant instability. However, none of 5 patients who demonstrated cage displacement or screw pullout, underwent a revision. Radiographs revealed bony consolidation in 96.3% of the patients, including 6 patients with implantation failure during the follow-up period. CONCLUSION: Based on our preliminary results, the titanium mesh cage and dynamic plating was effective for cervical reconstruction after corpectomy. The anterior cervical reconsrtruction performed with dynamic plates is considered to reduce stress shielding and greater graft compression that is afforded by the unique plate design.
Subject(s)
Animals , Humans , Deglutition Disorders , Follow-Up Studies , Hoarseness , Lordosis , Paralysis , Retrospective Studies , Spine , Titanium , TransplantsABSTRACT
OBJECTIVE: Expandable cage used for spinal reconstruction after corpectomy has several advantages over nonexpendable cages. Here we present our clinical experience with the use of this cage after anterior column corpectomy with an average of one year follow up. METHODS: Ten patients underwent expandable cage reconstruction of the anterior column after single-level or multilevel corpectomy for various cervical spinal disorders. Anterior plating with or without additional posterior instrumentation were performed in all patients. Functional outcomes, complications, and radiographic outcomes were determined. RESULTS: There was no cage-related complication. Functionally, neurological examination revealed improvement in 7 of 10 patients and no patient had neurological deterioration after the surgery. Immediate stability was achieved and maintained throughout the period of follow-up. There was minimal subsidence (<2mm) noticeable in three of the cases that underwent a two-level corpectomy. Subsidence was noted in osteoporotic patients and patients undergoing multi-level corpectomies. Average pre-operative kyphotic angle was 9 degrees. This was corrected to an average of 5.4 degrees in lordosis postoperatively. CONCLUSION: In conclusion, expandable cages are safe and effective devices for vertebral body replacement after cervical corpectomy when used in combination with anterior plating with or without additional posterior stabilization. The advantages of using expandable cages include its ability to easily accommodate itself into the corpectomy defect, its ability to tightly purchase into the endplates after expansion and thus minimizing the potential for migration, and finally, its ability to correct kyphosis deformity via its in vivo expansion properties.