ABSTRACT
Objective@#To investigate the color stability of computer aided design and computer aided manufacture (CAD/CAM) composite ceramic/resin cements after accelerated ageing.@*Methods@#Twelve groups (ten samples each group) were used as experimental groups, which were composed of CAD/CAM composite ceramic of three kinds of thickness (0.50, 0.75, 1.00 mm) (Lava Ultimate) associated with resin cements (Variolink N) of four colors (A1, A3, T, BL1). Another three groups of CAD/CAM composite ceramic/resin cements of three different kinds of thickness (0.50, 0.75, 1.00 mm) were used as control groups (ten samples each group). All samples were put into the xenon lamp ageing instrument to implement accelerated ageing. Spectrophotometers were used to measure the lightness (L*), red green color value (a*) and blue yellow color value (b*) of all samples before and after accelerated ageing process, and the changes of color variation (ΔE) was calculated. The effect of composite ceramic thickness and resin cement color on the changes of color variation (ΔE) before and after the ageing of CAD/CAM composite ceramic/resin cement and whether there was an interaction between them were tested by two-way ANOVA.@*Results@#Before and after accelerated ageing, the ΔE of CAD/CAM composite ceramic/resin cements were <3.3. Two-way ANOVA showed that the thickness of CAD/CAM composite ceramics had an effect on ΔE (F=27.025, P<0.001), and the color of resin cement also had an effect on ΔE (F=15.606, P<0.001), but there was no interaction between them (F=0.534, P=0.829).@*Conclusions@#The thickness of CAD/CAM composite ceramics and the color of resin cements could both affect the color stability of composite ceramic/resin cements combination. However, the resulted color change is within the clinically acceptable range.
ABSTRACT
<p><b>OBJECTIVE</b>In this work, we aim to determine the optimum pH value for the preparation of 3% yttria-stabilized tetragonal zirconia polycrystalline (3Y-TZP)/3%Al₂O₃ and optimum calcination temperature of Al₂O₃ precursor and amorphous boron nitride (BN) for Al₂O₃-BN coating 3Y-TZP powders.</p><p><b>METHODS</b>The 3Y-TZP/3%Al₂O₃ composite powders were prepared through the heterogeneous precipitation method under different pH values (6.5, 7.5, 8.5, and 9.5) and analyzed through transmission electron microscopy (TEM) to determine the optimum coating morphology. Al₂O₃ precursor, which was prepared under the optimum pH value, was calcined at different temperatures (800, 1 000, 1 200, and 1 400 ℃). The amorphous BN coating 3Y-TZP/3%Al₂O₃ powder was prepared via in situ reaction with boric acid and urea (calcined with N₂ at 850 ℃ for 5 and 3 h and 800 ℃ for 5 and 3 h). TEM, energy dispersive spectrometry (EDS), and X-ray diffraction (XRD) were performed to characterize the results.</p><p><b>RESULTS</b>The optimum coating morphology was obtained at 8.5 pH. When the Al₂O₃ precursor was calcined at 1 200 ℃ and coated with BN (calcined with N₂ at 800 ℃ for 5 h), the Al-B-O compound was less, and t-ZrO₂ was more represented.</p><p><b>CONCLUSIONS</b>The optimum pH value for 3Y-TZP/3%Al₂O₃ composite preparation is 8.5. For the preparation of Al₂O₃-BN coating 3Y-TZP powders, the optimum calcination temperature of the Al₂O₃ precursor and amorphous BN are 1 200 and 800 ℃, respectively.</p>
ABSTRACT
Objective To prepare a novel bioactive and degradable scaffold with mineralized collagenpolyose based composite by biomimetic synthesis for bone tissue engineering and explore the compatibility of osteoblast culturing on the scaffold. Methods Two kinds of polyelectrolyte were assembled on the surface of diatomite particles in order to adsorbe on nano-zirconia through opposite charges. Zeta potential,particle size and size distribution were compared before and after the modification of diatomite; IR was used to analysis molecular structure of functional group changes on the surface of diatomite particles, nano-composite powder morphology was observed by SEM. Results Two kinds of the polyelectrolyte were successfully assembled on the surface of diatomite powders. Particle size and size distribution were significantly reduced, d (0.5) reduce from 16.421 μm to 0.420 μm. SEM showed the dispersion of the modified diatomite was improved and had a good adsorption with nano-zirconia. Conclusion Layer-by-layer technique could enhance the dispersion of diatomite-based dental ceramic powders as well as a good adsorption of nano-composite ceramic powder.