Evaluation of Ischemic Heart Diseases Using Computed Tomography Scan in Riyadh Region

This study was performed to evaluate Coronary Arteries imaging by Computer Tomography (CT) and its ability to diagnose ischemic conditions among emergency department patients presented. To measure the sensitivity of coronary CT in the diagnosis of cardiac conditions, the study also assessed the correlation between variables such as age, sex, troponin level, Electrocardiogram (ECG), and symptoms with results of CT coronary. The research was done in the Emergency Department of Prince Sultan Cardiac Center, Riyadh, Saudi Arabia from January to June 2022. It includes 50 patients (males to females' ratio was 70% to 30%). All patients were diagnosed to have CT coronary abnormality. The results showed that related to patient symptoms, asymptomatic 6%, atypical chest pain 28%, chest pain 24%, palpitation 8%, and multiple symptoms 34%. The correlation between findings on ECG was that only (8%) had abnormal troponin levels. Calcium CT 28% and CT coronary were found to be abnormal in 48% of the patients, abnormal CT findings were found to be (52%) of the patients The most commonly reported symptoms by the patients were asymptomatic chest pain. There was no statistically significant association was seen between patients’ gender and symptoms or between symptoms reported and age. patients aged above 50 years had significantly higher CT findings (75%) than other age groups (p=0.004). However, there was no statistically significant association observed between CT findings and symptoms, ECGfindings, and troponin hormone levels. The study recommended that the CT coronary is the best way to diagnose ischemic coronary diseases.

Clinical application value and imaging diagnosis of stress fracture / 中国骨伤

<p><b>OBJECTIVE</b>To discuss the imaging findings of stress fracture, in order to improve the ability of early diagnosis and early treatment of this disease.</p><p><b>METHODS</b>The DR, CT and MRI imaging data of 336 cases of stress fracture from January 2010 to January 2016 were analyzed retrospectively. Early diagnosis ratio in stress fractures by three methods were analyzed using²-test.</p><p><b>RESULTS</b>Early diagnosis ratio of three methods as follow: DR was 70.83%(238/332), CT was 55.93%(66/118), and MRI was 73.61%(53/72). There was statistical significance among three methods (²=10.15,=0.006), the early diagnosis ratio of DR was higher than CT (²=8.765,=0.003)and there was no statistical significance between DR and MRI (²=0.224,=0.636).</p><p><b>CONCLUSIONS</b>DR and MRI have better diagnosis of stress fractures while CT is not helpful in the early diagnosis. DR examination is preferred method due to its economical and convenient. MR is the important complement means, which can improve the early diagnosis ratio and provide imaging diagnosis basis for the clinical, so that the disease get early intervention and treatment.</p>

CT-guided radiofrequency ablation of VX2 lung tumors in rabbits / 中国癌症杂志

10.3969/j.issn.1007-3969.2013.05.005

Evaluation on Protrusion of the Imaginary Prostate Volume Using Three-Dimensional Volume Rendering / 의학물리

This study is to compare the accuracy of evaluation regarding the volume of the prostate, which three-dimensional volume rendering was produced the shape of protrusion, by measuring two kinds of craniocaudal length from the top of the protrusion and from the exclusion of the protrusion as the starting points. For the imaginary protrusion prostate models, total of 10 models were roughly made by using devils-tongue jelly and changing each of the 10 ml of capacity from 10 ml to 100 ml. For the protrusion prostate models aimed at estimating the real volume, through 64 cannel computed tomography (CT) and 3.0 tesla magnetic resonance image (MRI) were conducted by planimetry technique from three-dimensional volume rendering. And then we performed to evaluate on significance of these volumes by wilcoxon signed rank test. Also the obtained volumes data by ellipsoid volume formula were measured the volume of protrusion prostate models two times with each method using the two kinds of craniocaudal length from top of the protrusion and from exclusion of the protrusion as the starting points. Finally, the significance of differences using wilcoxon signed rank test was evaluated between the real volume by planimetry technique and the measured volume by ellipsoid volume formula from three-dimensional volume rendering. The average of the protrusion length on the models was 0.90+/-0.18 mm in CT and was 0.75+/-0.11 mm in MRI. There were not statistically significant difference between MRI and CT from the volume of protrusion prostate models (p=0.414). In MRI (p=0.139) and CT (p=0.057), there were not statistically significant difference between the real volume by planimetry technique and the measured volume by ellipsoid volume from exclusion of the protrusion as the starting points. While, there were statistically significant difference between the real volume by planimetry technique and the measured volume by ellipsoid volume from top of the protrusion as the starting points in MRI (p=0.005) and CT (p=0.005). For the accurate measurement of the protrusion prostate models, the craniocaudal length of the prostate should be measured from the exclusion of the protrusion as the starting points.

Significance of the Position of the Craniofacial Computed Tomographic Scanning

The computer imaging process is becoming a popular procedure in the research of the craniofacial skeleton. In acquisition of the digital data of computer tomography (CT), the position of the head is likely to vary each time. The difference in head position results in different orientations on actual images, which in turn may result in misinterpretation of the image. The purpose of this study is to point out the importance of position alignment between CT databases before pursuing research by comparing the images of different position alignment To show the significance of the alignment of CT scan, eleven target points were selected from CT scan and the coordinates were obtained from the different position of the aligned CT scan by the nasion, basion, and bilateral external auditory meatus. The target points were divided into three groups-the central points, the lateral points, and the mid points groups, depending on their positional configuration from the mid- sagittal plane. The alignment of CT scan was processed by volume rendering method and the coordinates of target points were taken from the three dimensional images with different position. The aligned CT images rotated by 10 degrees with respect to the X-axis, the (X- and Y-axes), and the (X-, Y-, and Z axes), respectively. Eleven target points were measured from these rotated images one per day, for 10 days, by a plastic surgeon. The mean coordinates from the 10 trials were defined as the gold standard values for the other 10 times measurement. The measurement error(ME) of the central points group was lower than that of the mid points group, and the ME of the mid points group was lower than that of the lateral points group. The ME increased as the distance from the center to target point increased. However the ME of aligned CT images was the lowest of all the rotated cases. For the mean ME of the 11 points, aligned image, the X-axis(X- and Y-axes), and (X-, Y-, and Z-axes) rotation were 0.97, 1.53, 1.62 and 1.77 mm, respectively. Among three rotated cases, ME of the(X-, Y-, and Z-axes) rotation had the highest one. Above results mean that the chance of incorrectly localizing the target points could be significantly reduced if the skull CT images were aligned, in the research of the measurement of craniofacial skeleton from CT scan.

CT Technique Supplied by DSA System / 医疗卫生装备

Objective To study the clinical value of CT function supplied by DSA system. Methods 278 patients were scanned by Innova CT ,which was concomitant with Innova 3100 DSA system, to check fresh blood .In the PTC operation, Innova CT was used to direct the site,degree,deepness of needle. Results Innova CT found intracranial hemorrhage in 4 cases . The fresh blood were checked by helical -CT,too. Innova CT comparing with B type ultrasonograph ,the orientation of needle were more convenient, exact, faster. Conclusion Innova CT could perform CT scan in interventional room to save time for emergence patients. It is a great improvement that gets CT images by DSA system. There is better consistency between Helix CT and Innova CT.

Correlation between Osteoporosis and Skin Thickness on CT Scan

PURPOSE: The purpose of this study was to evaluate the relationship between osteoporosis and skin thicknessas shown by CT scanning. MATERIALS AND METHODS: Eighty- six women with osteoporosis (mean age, 52) and 51 normalcontrols (mean age, 50) participated in the study. For a quantitative CT examinations, a CT scanner(Somatom Plus,Siemens) was used. Osteoporosis was defined as present when spinal bone mineral density was more than 2.5 standarddeviations below young normal density, as determined by quantitative CT. Patients with endocrinologic, malignantor collagen disease and undergoing antimetabolite or steroid therapy were excluded. The thickness of back skin wasretrospectively measured at the third lumbar vertebra level, as seen on CT films, using a conventional magnifier.For statistical analysis, Students' t test and Spearman's rank correlation were used. RESULTS: On the basis of CTscans, the mean thickness of back skin in the osteoporotic group(0.50+/-0.20 mm) was significantly less than innormal control subjects(0.80+/-0.23 mm) (p<0.001). Significant correlation was observed between skin thickness andbone mineral density(r=0.523, p<0.0001). Sensitivity, specificity, accuracy, and positive and negative predictivevalues were measured as 76, 78, 76, 88, 62% with a cut-off value of 0.6 and 84, 61, 77, 81, 66% with a cut-offvalue of 0.7, respectively. CONCLUSION: The present study demonstrated that the thickness of back skin, asmeasured by CT scanning, is predictive of osteoporosis.