ABSTRACT
Objective@#The purpose of this study was to investigate the differences in the anti cyclic fatigue performance of Woride KS (WKS), Proteper Gold (PTG), and Hyflex CM (HCM) nickel titanium instruments with different tip diameters in curved root canal models, and to provide reference for the targeted selection of suitable nickel titanium instruments in clinical preparation of curved root canals.
ABSTRACT
Aim: To evaluate the limits of the shaping ability of MaxWire® alloy file in the treatment of pre-created large and curved root canals with different apical sizes by using cone-beam computed tomography (CBCT). Materials and methods: Forty-five permanent maxillary first molars with moderately curved palatal roots (20°-30°) were divided into three groups, and large root canals were created with apical diameter #35 (Group 1), #40 (Group 2) or #50 (Group 3) by using BioRace NiTi System. Then, they were reshaped with the MaxWire alloy file, XP-endo Shaper®. Canals were scanned before and after instrumentation by using the CBCT scanner. Canal transportation (CT), centering ratio (CR), % increased prepared area (PA), and % increased prepared outline (PO) at 2, 3, and 4 mm from the apex were calculated. Data were statistically analyzed at P < 0.05. Results: There was a significant difference in the mean increase in PO in all apical sizes and all three levels. At both 3 mm and 4 mm levels the maximum PA and PO were achieved in apical size 35, while at 2 mm level the maximum values were obtained in apical size 40. There was no statistically significant difference in CT and CR within groups at 2 mm distance from the apex. Conclusion: Max Wire alloy technology of this novel instrument makes it possible to clean and touch the dentin walls of large and curved root canals. Small FOV and small voxel size of CBCT could also be used in shaping ability studies in endodontics.
ABSTRACT
Objective:To evaluate the clinical application effect of two nickel-titanium engine driven systems on moderate curved root canals. Methods:Ninety mesial root canals with moderate curvature of extracted human first mandibular permanent molar were randomly divided into three groups: M3 PRO Group, MTwo group and K group. The glide path was firstly prepared by using #10/04 file in M3 PRO group and MTwo group and #10 file in K group respectively.Then the preparation of root canals up to #25 was performed according to the instruction manual in each different group using standardized technique. All data including time required in glide path preparation, shaping preparation, total root canals preparation and changes of working length in root canal were recorded and analyzed statistically by using Analysis of Variance (ANOVA) and LSD-t tests (P<0.05). Results:Root canal glide path preparation time: MTwo group showed significantly less preparation time while M3 PRO group exhibited significantly the longest preparation time. There was significant difference between MTwo group and M3 PRO group (P=0.001). Root canal shaping preparation time: M3 PRO group showed significantly less preparation time while K group exhibited significantly the longest preparation time. Both MTwo group and M3 PRO group showed significantly less preparation time than K group (P=0.004, P=0.001), but there was no significant difference between MTwo group and M3 PRO group (P=0.573). Total root canal preparation time: MTwo group showed the shortest time while K group exhibited the longest time. There were significant differences between MTwo group, M3 PRO group and K group (P=0.004, P=0.033), but no significant difference between MTwo group and M3 PRO group (P=0.451). Changes of root canal working length: There were significant differences among the three groups (P=0.037, P=0.037, P=0.000). M3 PRO group showed a minimal change while K group exhibited significant changes. Conclusion:MTwo nickel-titanium engine driven system with #10/04 file preform a high efficiency in glide path preparation, whilst M3 PRO nickel-titanium engine driven system show less changes in working length. Under the circumstances where the total time required for root canal preparation is not significant, M3 PRO nickel-titanium engine driven system is more suitable for root canal preparation in moderate curved root canals.
ABSTRACT
60 curved root canals of permanent teeth with angles of curvature ranging from 15°to 40°(Schneider's methodology)were prepared using the instruments of Hyflex CM(HC) and ProTaper(PT) Universal respectively(n=30).Using standardized pre-and post-instrumentation paralleling periapical radiographs,canal curvature was determined by image analysis software and the clinical shaping effect of Hyflex CM and ProTaper rotary NiTi files were compared.The canal curvature in group HC and PT decreased by 4.54°±3.25° and 5.63°±3.84° respectively(between pre-and post-treatment in both groups,P0.05).Hyflex CM can meet the clinical necessity for the instrumentation of curved root canals.
ABSTRACT
Background: Cleaning and shaping the root canal is an important phase in endodontic therapy. A prepared root canal should have a shape that flares from apical to coronal regions, maintaining the apical foramen and not changing the original canal curvature. Aim: To compare canal transportation, canal centring ability and remaining dentin thickness, in curved root canals using Twisted Files, PathFiles-ProTaper System, RaCe files, WaveOne reciprocating files and hand NiTi K-files with Cone Beam Computed Tomography. Materials and methods: 125 canals with completely formed apices and angle of curvatures ranging from 10 degrees to 60 degrees were used. The teeth were divided in five experimental groups of 25 each. Instrumentation was performed in Group I with Twisted files, Group II with PathFile-ProTaper, Group III with Hand NiTi files, Group IV with RaCe files and Group V with WaveOne reciprocating files. CBCT images were obtained before and after instrumentation with Kodak CS9300 equipment Neerja Sharma, Shafia Sarfi, Avdesh Sharma, Mandeep S Grewal. Evaluation of canal preparation with rotary and hand Niti files in curved root canals using Cone Beam Computed Tomography: An In Vitro Study. IAIM, 2017; 4(7): 45-55. Page 46 (CS3D Imaging Software 3.1.9). The amount of canal transportation, centering ability and remaining dentin thickness was calculated at nine levels. Results were analysed using ANOVA test and Post-hoc Bonferroni Multiple Comparison test. Results: Statistically significant difference was noted among the groups at the middle and apical third level with WaveOne files showing the least and hand NiTi files showing the highest transportation. The mean centering ratio was statistically highest with WaveOne and smallest with hand NiTi files at the middle third level. At the apical level (p < 0.05) the mean remaining dentin thickness was highest with WaveOne and smallest with PathFile-ProTaper. Conclusion: WaveOne and Twisted files were similar in terms of canal transportation, centring ability and remaining dentin thickness. Hand NiTi files and Pathfile-ProTaper systems produced maximum amount of canal aberrations.
ABSTRACT
Objective To evaluate the clinical efficacy of combined use of Pathfile and Mtwo in the preparation of curved root canals.Methods This study enrolled a total of 90 teeth(313 root canals)that need root canal therapy because of pulpitis or apical periodontitis from December 2013 to February 2014.All root canals were randomly divided into three groups.In group A,both Pathfile and Mtwo NiTi files were used in root canal preparation.In group B,Pathfile and ProTaper were used.ProTaper was employed alone in root canal preparation in group C.The high temperature thermaplasticized inj ectable ver-tical condensation technique was applied in all the three groups.The time of root canal preparation,the number of separated de-vices,root canal transportation and the quality of root canal filling were obtained and compared among the 3 groups.Results In group A,the time of root canal preparation was shortest,(6.01±1.12)min ;there were no instrument separation and ledge for-mation,and the filling rate was highest in group A.The differences were significantly noted in these indexes between group A and groups B,C.Conclusion Combined use of Pathfile and Mtwo for preparation of curved root canals is fast and safe,and the root canal filling is satisfactory.This method is suitable for clinical application.
ABSTRACT
Objective: This study evaluated the influence of the instrumentation technique and apical preparation size on the filling capacity of a calcium hydroxide (CH)-based paste. Materials and Methods: Fifty simulated curved canals were prepared in acrylic blocks (five groups; n = 10 each). In three groups, the canals were preflared with Gates-Glidden drills and the apical stop was prepared with #25, 30 or 35 Flexofile files. In the other two groups, the canals were prepared with ProTaper rotary instruments and the apical stop was prepared with F1 and F2. A CH paste was injected into the canals using a special syringe. The four sides of the blocks were scanned with the root curvature to the mesial, buccal, distal and palatal faces. The amount (%) of filling in the total canal area and in the apical 5 mm was obtained [analysis of variance (ANOVA); Tukey's test; α = 0.05]. Qualitative analysis of apical filling was done (absence vs. presence of filling deficiencies) (chi-square test; α = 0.05). Results: There was no significant difference in canal filling among the groups at any block side. Presence of voids was associated with the simulated mesial and distal faces. Conclusions: An effective canal filling with the CH paste was not achieved in all cases. Canal filling failure occurred mostly in the apical third. Filling deficiencies can be better visualized in canals with mesial and distal root curvatures.
ABSTRACT
Objective To study and assess clinical application of two Nickel-Titanium(NiTi)rotary instru- ments,namely ProTaper and Hero 642,in preparation of root canals.Methods 125 teeth were divided into three groups and respectively instrumented by stainless K-files,ProTaper or Hero 642 rotary instruments.All teeth were obturated with lateral condensation method.The efficiency of preparation and obturation was analyzed with radio- graphs.Results NiTi rotary instruments were better in keeping the curvature and flow of curved canals than stain- less K files.There was no transportation,apical blockage and ledge in NiTi groups.The operative time was shorter and endodontic flare-up seldom occurred in NiTi groups.Conclusion The NiTi rotary instrumentation technique could be used to prepare curved root canals effectively and quickly.The future use of NiTi engine-driven rotary in- strument appeared to be promising.
ABSTRACT
Objective:To evaluate the shaping ability of nickel-titanium (NiTi) rotary instrument Hero 642 combined with SX of ProTaper in moderately and severely curved root canals.Methods:42 teeth with moderately and severely curved canals in 42 patients were prepared by Hero 642 and SX of ProTaper using crown-down technique and obturated with lateral condensation method. The efficiency of the preparation and obturation were analyzed by radiographs before and after treatment. Results:After preparation by the rotary instrument the original curvature and alignment of the canals were kept. No transportation, apical blockage, ledge or perforation was found in all cases. In one case,the file was broken during operation.After treatment light pain was complained in 4 cases and the pain alleviated and disappeared spontaneously. Conclusion:The NiTi rotary instrumentation technique with Hero 642 and ProTaper can be used to prepare curved root canals effectively and quickly.