Estabilidade dimensional de moldes obtidos com alginato de armazenamento tardio / Dimensional stability of molds obtained with late storage alginate

Resumo Introdução Recentemente, vêm surgindo no mercado alguns alginatos de armazenamento prolongado. Não há, no entanto, um consenso na literatura a respeito da estabilidade dimensional destes materiais durante este armazenamento Objetivo Avaliar, por meio de método prático experimental, a estabilidade dimensional de um alginato de armazenamento tardio. Material e método O material de moldagem utilizado foi o alginato Hydrogum 5 (Zhermack). Uma matriz metálica cilíndrica foi utilizada para a realização das moldagens, com 38 mm de diâmetro externo, 30 mm de diâmetro interno e cuja superfície superior apresenta três linhas paralelas entre si com 25 mm de comprimento e 20, 50 e 75 µm de largura. Após o tempo de geleificação do material de moldagem, 16 moldes foram colocados em um umidificador e essas amostras foram fotografadas utilizando-se uma câmera digital (Canon EOS Rebel 3Ti, Canon) associada a um software para análise das imagens obtidas (ImageJ 1.52a, U.S. National Institutes of Health; DI). A calibragem da régua foi 10 cm e, posteriormente, três linhas foram medidas três vezes, para se obter uma média dos comprimentos das linhas. As amostras foram fotografadas nos seguintes intervalos: imediatamente, 24, 48, 72, 96 e 120 horas. Resultado Os dados mostraram diferenças estatisticamente significantes para o fator tempo quando comparada a leitura imediata com os demais períodos de tempo de leitura (p<0,001) e quando comparada a leitura após 24 h de armazenagem com os demais períodos de tempo (p<0,001). Não houve diferença estatística (p>0,05) quando os tempos de armazenamento de 48 h, 72 h, 96 h e 120 h foram comparados entre si. Todos os valores encontravam-se dentro dos valores preconizados pela ISO 21563:2013. Conclusão Os moldes dos alginatos testados podem ser armazenados por até cinco dias em 100% de umidade relativa.

Abstract Introduction Recently, some extended-pour alginate impression materials have been placed in the market. However, there is no consensus in the literature regarding the dimensional stability of these materials during these storage. Objective To evaluate, through the experimental model, the durability and velocity with respect to dimensional alteration, analyzing the material and detecting distortions. Material and method The material for molding in this test was alginate (Hydrogum 5, Zhermack). A cylindrical metallic matrix was used to make the moldings with: 38 mm of external diameter, 30 mm of internal diameter and superior of the upper series of the card 3d transport lines with each 25 mm in length and 20, 50 and 75μm in width. After the time of jellification / polymerization of the molding material, 16 molds were inserted in a doser and were photographed with a digital camera (Canon EOS Rebel 3Ti, Canon) associated with a software for analysis of sacred images (ImageJ 1.52a, US National Institutes of Health, DI). The calibration of the ruler was performed in 10 cm and then in 3 lines were means 3 (three) times to obtain a mean of the lengths of the lines. The photographs were taken at the following intervals: immediately, 24, 48, 72, 96 and 120 hours after being cast. Result The data were found when compared with the other parts of the reading time (p <0.001) and when compared to the execution after 24 hours of locomotion with the other parts of the time (p <0.001). The rest time of 48 hours, 72 hours, 96 hours and 120 hours were compared to each other. Conclusion The molds of the tested alginates can be stored for 5 days in 100% relative sauce.

Accuracy of partially edentulous arch impressions obtained from different alginates and storage times

Purposes: This study aimed to assess the dimensional accuracy of five commercial alginates verified in stone casts. Methods: Each alginate impression (Cavex ColorChange, Cavex Holland BV; Jeltrate Plus, Dentsply; Hydrogum, Zhermack; Kromopan 100, Lascod; Ezact Kromm, Vigodent) was performed on partially edentulous standard stainless steel mandibular arch cast with reference points on teeth 33, 43, 37 and 47. On the stainless steel cast, the anteroposterior (33-37 and 43-47) and transverse (33-43 and 37-47) distances were measured in a stereomicroscope at 30x magnification and 0.5 µm accuracy. The distances between these points were measured three times, obtaining an average, which was analyzed statistically and compared with the distances obtained from the stone casts. For each alginate the casts were poured gypsum (n = 5) immediately and after a period of 1, 2, 3 and 5 days of the impression procedure. Results: The dimensional accuracy values of stone and stainless steel casts were analyzed statistically by two-way ANOVA and Tukey's test (α=0.05). The results showed significant differences between the alginates; however, no differences in dimensional accuracy were found among the different storage times of alginate impression. Conclusions: It can be concluded that the alginate impressions can be stored for up to 5 days (AU)

Transferência precisa da morfologia do tecido mole peri-implantar em prótese anterior: relato de caso / Accurate transposition of peri-implant soft tissue morphology in anterior prosthesis: case report

O perfil de emergência em próteses implantossuportadas é a porção da restauração que emerge coronalmente do implante até a gengiva marginal livre, visando conferir suporte e estabilidade ao tecido mole peri-implantar, mimetizando o dente natural. As restaurações com contornos apropriados têm um efeito significativo na higiene bucal, saúde do tecido peri-implantar e estética. O maior desafio para a confecção de próteses implantossuportadas definitivas está na duplicação do perfil de emergência obtido com a prótese provisória para o modelo de trabalho, sendo que há várias técnicas publicadas, porém não há um consenso na literatura sobre qual método é mais preciso. O objetivo do presente estudo é apresentar, por meio do relato de um caso clínico, uma técnica de moldagem do perfil de emergência e tecido peri-implantar...

The emergence profile for implant-supported prostheses is the portion of the restoration that emerges coronally from the implant to the free gingival margin, giving support and stability to peri-implant soft tissues and mimicking the natural tooth. Restorations with appropriate contour have a significant effect on oral hygiene, health and esthetics of peri-implant tissues. The greatest challenge involved in manufacturing permanent prosthesis is the duplication of the emergence profile obtained with the provisional restoration secured to the cast. Several techniques have been published, but no consensus has been reached on the literature regarding which method is the most accurate. The objective of this study is to present a technique for molding the emergency profile and peri-implant tissues by presenting a clinical case...

Influence of retentive areas associated to onlay preparations on the dimensional stability of silicone impression materials

This study evaluated the effect of retentive areas on onlay preparations on the dimensional alterations in condensation and addition silicone materials. A standard model with an onlay preparation was made. Each impression material was used through the double or simultaneous impression technique (n=25), resulting in a hundred impressions of the same model. Impressions were poured with type IV dental stone. Digital images were taken with a light microscope and the distances between the reference points created on the plaster dies were compared with the ones on the standard model. In the occlusal, mesial-medium and mesial-cervical segments, the double impression (DI) with condensation silicone presented similar values compared to the standard model. The values of the addition silicone with DI were similar to the standard model only in the mesial-occlusal segment. In the other segments (distal-cervical, distal-medium and distal-occlusal), all groups were statistically different from the control. It could be concluded that addition and condensation silicone impressions provided plaster dies with significant dimensional alterations in most of the evaluated areas when compared to the standard model. The retentive areas related to the onlay preparation influenced the dimensional stability of the addition and condensation silicone impressions.

Este estudo avaliou as alteracoes dimensionais de silicones de condensacao e adicao usados em duas tecnicas como resultado de areas retentivas de preparos do tipo onlay. Um modelo padrao foi feito e vinte e cinco moldagens realizadas com os dois materiais, atraves da tecnica de dupla impressao ou impressao simultanea, e cada material resultou em 50 modelos de gesso. Imagens digitais foram feitas com um microscopio de luz e as distancias entre os pontos de referencia criados no modelo de gesso foram comparados aos pontos de referencia no modelo padrao. Nos segmentos oclusais, medio-mesial e cervico-mesial, a tecnica de dupla impressao (DI) com silicone de condensacao apresentou valores similares comparados ao modelo padrao. Os valores do silicone de adicao com DI foram similares ao modelo padrao somente no segmento mesio-oclusal. Nos outros segmentos (disto-cervical, medio-distal e disto-oclusal), todos os grupos foram estatisticamente diferentes do controle. Pode- se concluir que moldagens com silicone de adicao e condensacao conferem modelos de gesso com alteracoes dimensionais significativas na maioria das areas avaliadas, quando comparadas ao modelo padrao. As areas retentivas relacionadas ao preparo de onlay influenciaram na estabilidade dimensional das moldagens atraves dos silicones de condensacao e adicao.

The effect of glutaraldehyde disinfectant on the dimension stability of four high polymer impression materials / 实用口腔医学杂志

Objective:To measure the effect of disinfection on dimension stability of four high polymer impression materials which were separately immersed in 20 ml/L glutaraldehyde solution.Methods:Fifteen plaster replication models of four high polymer impression materials(Impregum Penta polyether, Express-Putty silicone, Silagum-Putty silicone, GC EXAFINE silicone) were made on the same metal master cast respectively. Vertical and horizontal dimensions between landmarks on the masters and plaster casts were measured with an optical microscope,one-way ANOVA was used to compare the measurements among the materials.Results:The difference between the masters and Casts in horizontal distances measured on Express-Putty silicone impression material produced models was longer than those on other high polymer impression materials produced ones after disinfection for 20 minutes and beyond clinical requirement. Compared with metal master cast, the difference became significant when these four silicone impression materials were disinfected for 40 minutes. Conclusion: Among the four kinds of impression materials, the Express-Putty silicone material is relatively the most accurate one after disinfection for 20 minutes.