ABSTRACT
A escassez de dados científicos que validem os benefícios da diatomita para as propriedades físicas da resina composta Zirconfill® torna imperioso a realização de novos estudos, principalmente no tocante a utilização dessa resina contendo diatomita em restaurações semidiretas. Objetivo: Avaliar in vitro a polimerização e resistência de união entre uma resina composta contendo diatomita e de uma resina composta bulk-fill após 24 horas e após 06 meses de envelhecimento em água. Materiais e métodos: Foram utilizados 28 incisivos bovinos para produzir cavidades dentinárias cônicas (4,8 mm de diâmetro maior x 2,8 mm de diâmetro menor x 4 mm de espessura) e fator C de magnitude 3,1. Esses preparos cavitários (n=28) foram restaurados com as resinas compostas Filtek™ One Bulk-fill (BF) (3M ESPE) ou Zirconfill ® (ZF) (BM4), através da técnica semidireta, utilizando o sistema adesivo Single Bond Universal (3M ESPE) e o cimento resino dual Relyx™ Ultimate (3M ESPE). A análise da polimerização foi realizada através da razão base/topo (B/T) de dureza Vickers. E a resistência de união RU foi realizada através do teste de extrusão push-out em máquina de ensaio universal. As amostras foram armazenadas em água destilada a 37 ºC por 24 horas ou 06 meses, mas apenas a RU avaliou as amostras após 06 meses de envelhecimento. Os dados da B/T e da RU foram submetidos à análise de variância (ANOVA) a um e a dois critérios, respectivamente, com pós-teste de Tukey (p <0.05). Resultados: Não houve diferença estatisticamente significativa entre as resinas compostas na B/T. Para a RU, a resina composta ZF mostrou valores maiores do que a resina BF em ambos os tempos avaliados. Não houve diferença estatisticamente significativa de nenhuma resina na avaliação ao longo do tempo. Conclusão: A resina composta contendo diatomita mostrou-se promissora quando utilizada em restaurações semidiretas, visto que obteve resultados similar e até superior a resina composta bulk-fill (AU).
The scarcity of data validating scientific diatomite benefits for physical properties of Zirconfill® resin composite makes essential to develop new studies, especially regarding the use of this resin composite containing diatomite in semi-direct restorations. Aim: To evaluate in vitro the cure and bond strength between a resin composite containing diatomite and a bulk-fill resin composite after 24 hours and after 06 months of water storage. Materials and methods: Twenty-eight bovine incisors (n=28) were used to produce conical dentinal cavities (4,8 mm of larger diameter x 2,8 mm of smaller diameter x 4 mm of thickness) and C-factor of magnitude 3.1. These cavities were restored with Filtek™ One Bulk-Fill (BF) (3M ESPE) or Zirconfill® (ZF) (BM4) resin composites, through the semi-direct technique, using Scotchbond™ Universal (3M ESPE) adhesive system and Relyx™ Ultimate (3M ESPE) dual resin cement. The cure analysis was performed through bottom-to-top (B/T) ratio of vickers hardness, while bond strength (RU) was performed through the push-out test in a universal testing machine. The specimens were stored in distilled water at 37 ºC for 24 hours or 06 months, but only RU analyzed the specimens after 06 months aging. B/T and RU data were, respectively, submitted to one-way and two-way analysis of variance (ANOVA) with Tukey's post-test (p <0.05). Results: There was no statistically significant difference between the composite resins in B/T. For RU, the ZF composite resin showed higher values than the BF resin at both evaluated times. However, there was no statistically significant difference in resin composites over time. Conclusion: The resin composite containing diatomite showed promise when used in semi-direct restorations since it obtained similar or even superior results to bulk-fill resin composite (AU).
Subject(s)
Animals , Zirconium , Polymerization , Diatomaceous Earth , Time Factors , In Vitro Techniques/methods , Analysis of Variance , Dental Restoration, Permanent , Hardness TestsABSTRACT
La tierra de diatomea boliviana es una fuente de silicio potencialmente más económica en comparación a los reactivos de alta pureza comúnmente utilizados para la síntesis de zeolitas. Dada su composición compleja es necesario realizarle un pretratamiento ácido con el fin de reducir las impurezas y regular el contenido de aluminio. En este artículo se realizaron múltiples experimentos durante la etapa de pretratamiento ácido. La temperatura del pretratamiento ácido fue modificada en un rango entre 50 y 155 °C esto con el fin de determinar su efecto en la relación Si/Al final. Los resultados mostraron que la relación Si/Al puede ser modulada en un rango entre 6,2 y 38,1. Posteriormente, se obtuvieron zeolitas a partir de la tierra de diatomea modificada. Las zeolitas obtenidas presentaron una relación Si/Al entre 9,6 y 40,2. Se aplicaron distintas técnicas de caracterización para la determinación de las propiedades. El grado de cristalinidad y el área superficial específica están directamente relacionadas con la relación Si/Al. Los sitios ácidos están conformados por ácidos fuertes de tipo Brönsted y ácidos fuertes y débiles de tipo Lewis. Para la zeolita con menor relación Si/Al se determinó una elevada acidez total (>0,51 molNH3/Kgzeolita), mientras que para la zeolita con mayor relación Si/Al la acidez total se redujo considerablemente (<0,38 molNH3/Kgzeolita).
Bolivian diatomaceous earth is a potentially lower cost silica source than conventional high purity reagents used in zeolite synthesis. Due to its complex composition, it is necessary to pre-treat it with sulfuric acid in order to reduce impurities and regulate the aluminum content. In the present work several experiments were carried out with natural Bolivian diatomaceous earth in the pre-treatment stage. In order to determine the effect on the final Si/Al ratio, the temperature of the acid pre-treatment was varied between 50 to 155 °C. The results show that the Si/Al ratio can be modulated from 6.2 up to 38.1. These treated diatomaceous earth samples were used to synthetise ZSM-5 zeolite. The obtained ZSM-5 zeolites have a Si/Al ratio in the following range: 9.6 to 40.2. XRD, NH3-TPD and Nitrogen Physisorption techniques were used to characterise the properties of the obtained zeolites. The degree of crystallisation and the specific surface area are directly related to the Si/Al ratio, resulting in high values at high Si/Al ratios. The acid sites are composed of strong Brönsted acid sites and, strong and weak Lewis acid sites. For the zeolite with a low Si/Al ratio a high total acidity was found (>0.51 molNH3/Kgzeolite), while at high Si/Al ratios the total acidity is reduced (<0.38 molNH3/Kgzeolite).
A terra diatomácea boliviana é uma fonte potencialmente mais barata de silício em comparação com os reagentes de alta pureza comumente usados para a síntese de zeólitas. Dada a sua composição complexa, é necessário realizar um pré-tratamento ácido para reduzir as impurezas e regular o teor de alumínio. No presente trabalho, vários experimentos foram realizados durante a etapa de pré-tratamento ácido. A temperatura do pré-tratamento ácido foi modificada em uma faixa entre 50 e 155 °C para determinar seu efeito na relação Si/Al final. Os resultados mostram que a razão Si/Al pode ser modulada em uma faixa entre 6,2 e 38,1. Posteriormente, as zeólitas foram obtidas a partir de terra diatomácea modificada. As zeólitas obtidas possuem uma razão Si/Al entre 9,6 e 40,2. Diferentes técnicas de caracterização foram aplicadas para determinar as propriedades. O grau de cristalinidade e a área superficial específica estão diretamente relacionados com a razão Si/Al. Os sítios ácidos são compostos por ácidos fortes do tipo Brönsted e ácidos fortes e fracos do tipo Lewis. Para a zeólita com menor relação Si/Al, foi determinada uma alta acidez total (>0,51 molNH3/Kgzeólita), enquanto para a zeólita com maior relação Si/Al, a acidez total foi consideravelmente reduzida (<0,38 molNH3/Kgzeolita).
ABSTRACT
<p><b>OBJECTIVE</b>To evaluate the insecticidal effect of diatomaceous earth (DE) against adults and nymphs of Blattella germanica.</p><p><b>METHODS</b>This cross sectional study has been done on the laboratory strain of German cockroaches. Two stages, nymph and adult, were exposed to six dose rates of the DE, 2.5, 5, 10, 15, 20 and 25 g/m(2), at 24, 48 and 72 h exposure period. Mortality (number of dead cockroaches) was assessed after 24 h. Other exposed specimens were transferred to the beakers contained food and water for counting the retard mortality rate after 1 week.</p><p><b>RESULTS</b>Increasing in dose rates of DE increased mortality rate, so that the lowest and highest mortality rates were observed in 2.5 and 25 g/m(2), respectively. The results of the statistical analysis showed no significant difference in the lethality of 50% of DE plus water on the German cockroach nymphs.</p><p><b>CONCLUSIONS</b>Due to the resistance of German cockroach against organochloride, organophosphorus, carbamate and pyrethriodes insecticides, it is suggested to use DE for insect's control.</p>
ABSTRACT
Objective: To evaluate the insecticidal effect of diatomaceous earth (DE) against adults and nymphs of Blattella germanica.Methods:cockroaches. Two stages, nymph and adult, were exposed to six dose rates of the DE, 2.5, 5, 10, 15, 20 and 25 g/m2, at 24, 48 and 72 h exposure period. Mortality (number of dead cockroaches) was assessed after 24 h. Other exposed specimens were transferred to the beakers contained food and water for counting the retard mortality rate after 1 week. This cross sectional study has been done on the laboratory strain of German Results: Increasing in dose rates of DE increased mortality rate, so that the lowest and highest mortality rates were observed in 2.5 and 25 g/m2, respectively. The results of the statistical analysis showed no significant difference in the lethality of 50% of DE plus water on the German cockroach nymphs.Conclusions:Due to the resistance of German cockroach against organochloride organophosphorus, carbamate and pyrethriodes insecticides, it is suggested to use DE for insect’s control.
ABSTRACT
O crescimento da produção avícola provocado pela alta demanda do mercado acarreta um aumento da criação de aves em confinamento, o que resulta em um aumento da densidade das aves dentro do galpão. Em função disso, há um incremento da umidade da cama aviária, proveniente tanto das excretas das aves, como da água dos bebedouros, que favorece o crescimento de populações do coleóptero Alphitobius diaperinus, popularmente conhecido como cascudinho. O contato direto do inseto com a cama das aves, assim como a alimentação a partir de aves moribundas e mortas, faz do A. diaperinus um veiculador de diversos patógenos, sendo destacados bactérias, protozoários e vírus que causam imunossupressão nas aves. Além da relação com os patógenos, os cascudinhos podem provocar danos nas instalações avícolas, pois, na fase larval, escavam túneis no material isolante para empuparem e destroem a proteção de poliuretano usada para isolamento térmico dos galpões em países de clima frio, a qual precisa ser trocada a cada dois ou três anos. Outro fator prejudicial às aves é a substituição da ração balanceada por larvas e adultos do coleóptero, uma vez que afeta o ganho de peso, principalmente, das mais jovens. Frente ao exposto, a presença do cascudinho em instalações avícolas torna-se um problema, tanto sanitário, como financeiro. O controle do A. diaperinus é considerado difícil, e inseticidas químicos são comumente utilizados em aviários, mas apresentam desvantagens, pois deixam resíduos na carcaça, bem como no meio ambiente. A presença de alta quantidade de matéria orgânica nos aviários provoca a diminuição da efetividade dos inseticidas químicos. Vários estudos vêm sendo desenvolvidos na busca de alternativas, como, por exemplo, nematoides e fungos entomapatogênicos, mas até o momento não são produzidos em escala comercial. Outra linha de pesquisa é a utilização de terra diatomácea, um pó-inerte que não deixa resíduos na carne de frango e no ambiente.
The growth in poultry production because of the high market's demand causes an increase in the confinement raising, which increases the density of birds in poultry houses. As a result of this function, there is moisture increase in broiler litter, both from the excreta and drinkers, which favors the growth of the coleopterons Alphitobius diaperinus, popularly known as darkling beetle. The direct contact of the insects with the broiler litter as well as their feeding from dead and sick broilers make the A. diaperinus a vehicle for various pathogens, especially bacteria, protozoa and viruses. Besides the relationship with the pathogens, the darkling beetle can cause damage to poultry house, because at the larva stage they tent to burrow in to the insulating material and destroying the protection of polyurethane used for thermal insulation of poultry houses in countries with cold climate, which have to be changed every two or three years. Another harming factor to the broilers is the replacement of theirs balanced diet for larvae and adults of coleopterons, which affect the weight gain, mainly within younger individuals. Due to this factor, the presence of darkling beetle in poultry installations becomes a health as well as financial problem. The control of A. diaperinus is regarded as difficult and the use of chemical insecticides is common in poultry raising, even though it has disadvantages because it leaves residue in the carcass and in the environment. The presence of high amount of organic matter in poultry causes the decrease of the effectiveness of chemical insecticides. Several studies have been developed in research for alternatives, such as nematodes, fungi entomopathogenics, but they are not yet available commercially. Another line of research is the use of diatomaceous earth, an inert and non toxic powder which leaves no residues in chicken meat or in the environment.
ABSTRACT
Diatomaceous earth, quarried from the remains of aquatic plants deposited millions of years ago, continues to be a very important raw material with many industrial uses. In its natural state diatomaceous earth is an amorphous silica with no crystalline pattern. For many uses, however, it is calcinated and calcination converts a portion of the amorphous silica to a crystalline form, cristobalite which is far more fibrogenic. In a factory which produces calcinated diatomaceous earth, seven workers were proved as pneumoconiosis on l991 and 1992. Authors reviewed medical chart and current status of them. Authors also examined thirty one subject from the factory with questionnaire, physical examination, spirometry and chest radiography on August 13th 1993. The radiographs were independently interpreted by two radiologists and their findings were classified by International Classification of Radiography of pneumoconiosis(lLO, 1980). Total and respirable dust of diatomaceous earth were measured on october 1993. The results were as follows: 1.Of 31 workers, 6 (19.4%) were diagnosed as diatomaceous earth pneumoconiosis. There was an increasing tendency in prevalence of pneumocoiosis as the duration of dust exposure gets longer. 2. There were no significant differences in age, smoking rate, alcohol drinking rate, and pulmonary function test results between cases and non-cases. 3. The means of total dust exposures at flour manufacturing, fire brick grinding and packaging, ceramic raws packaging processes exceeded Korean and AGGIH standards, 10mg/m3. Above results suggest that engineering controls, periodic environmental and medical surveillance are important for preventing pneumoconiosis in the diatomite factory.