ABSTRACT
Quais as mudanças e descobertas que revolucionaram a Odontologia ao longo do tempo? A adesão, osseointegração, ortodontia e a tecnologia CAD/CAM estão entre essas grandes mudanças. Neste primeiro editorial de 2023 trazemos essa reflexão para o período que se inicia.
What changes and discoveries have revolutionized dentistry over time? Adhesion, osseointegration, orthodontics and CAD/CAM technology are among these major changes. In this first editorial of 2023, we bring this reflection to the period that begins.
ABSTRACT
Background:Traditional dental scanners require a heavy investment, representing a high barrier of entry into digital dentistry. Photogrammetric-based scanners may represent an affordable cost-effective alternative to traditional dental scanners used for the digitalization of plaster models. Photogrammetry is the science of extracting 3D information from photographs. The process involves taking overlapping photographs of an object or space and converting them into 2D or 3D digital models. Objective:This review aimedto identify and appraise the reported accuracy of photogrammetric-generated digital dental models.Materials and methods:A search strategy was applied in 3 databases (Medline, Web of Science and Scopus), from Feb 1 2021 to Dec 1 2021, the search was limited to articles in English published in the last 5 years about studies evaluating the dimensional accuracy of 3-dimensional digital models acquired by the scanning of plaster models with photogrammetric technologies.Results:Two independent reviewers screened 75 records on basis of titles and abstracts for assessment against the inclusion criteria for the review, 4 articles were deemed eligible, the risk of bias for the selected articles was measured, data extraction was performed by only one author.Conclusion:With today's technology, based on the four studies evaluated, we conclude that photogrammetric-generated digital models while lacking accuracy for incorporation into the treatment flow, in the future it could be used for diagnostic, planning, and achieving.
Antecedentes:Los escáneres dentales tradicionales requieren una gran inversión, lo que representa una gran barrera de entrada a la odontología digital. Los escáneres basados en fotogrametría pueden representar una alternativa asequible y rentable a los escáneres dentales tradicionales utilizados para la digitalización de modelos de yeso. La fotogrametría es la ciencia de extraer información 3D de fotografías. El proceso implica tomar fotografías superpuestas de un objeto o espacio y convertirlas en modelos digitales 2D o 3D.Objetivo:esta revisión tuvo como objetivo identificar y evaluar la precisión informada de los modelos dentales digitales generados fotogramétricamente.Materiales y métodos:Se aplicó una estrategia de búsqueda en 3 bases de datos (Medline, Web of Science y Scopus), del 1 de febrero de 2021 al 1 de diciembre de 2021, la búsqueda se limitó a artículos en inglés publicados en los últimos 5 años sobre estudios que evalúan la dimensión precisión de modelos digitales tridimensionales adquirida por el escaneo de modelos de yeso con tecnologías fotogramétricas.Resultados:dos revisores independientes examinaron 75 registros sobre la base de títulos y resúmenes para evaluarlos según los criterios de inclusión para la revisión, 4 artículos se consideraron elegibles, se midió el riesgo de sesgo de los artículos seleccionados, la extracción de datos fue realizada por un solo autor.Conclusión:con la tecnología actual, con base en los cuatro estudios evaluados, concluimos que los modelos digitales generados por fotogrametría si bien carecen de precisión para incorporarlos al flujo de tratamiento, en el futuro podrían usarse para el diagnóstico, la planificación y el logro.
ABSTRACT
3D printing is a technology that describes a manufacturing process previously planned and designed in a computer to create an object 1,2. This technology was introduced in dentistry by Chuck Hull since 1986 and allowed the automation and thus improved dental workflow 2. Technologies used in 3D printing involves: Stereolithography (SLA), bioprinting, fused deposition modeling (FDM), selective laser sintering (SLS), and PolyJet printing. We can choose one of them depending on the clinical use and material, need of accuracy among others. To 3D printing you need to use a scanner with an integrated software in order to capture the 3D images of the object being scanned. Those 3D images are stored in Standard Tessellation Language (STL) file 3. But what "Tessellation" means? Tessellation is the covering process of a surface, using one or more geometric shapes, with no overlaps and no gaps. It meansthat the object scanned is copied in detail with high reliability and then can be printed.
La impresión 3D es una tecnología que describe un proceso de fabricación previamente planificado y diseñado en un computador para crear un objeto. Esta tecnología fue introducida en odontología por Chuck Hull desde 1986 y permitió la automatización y, por lo tanto, mejoró el flujo de trabajo del consultorio. Las tecnologías utilizadas en la impresión 3D incluyen: estereolitografía (SLA), bioimpresión, modelado por deposición fundida (FDM), sinterización selectiva por láser (SLS) e impresión PolyJet. Podemoselegir uno de ellos dependiendo del uso clínico y material, necesidad de precisión entre otros.Para la impresión 3D, debe usar un escáner con un software integrado para capturar las imágenes 3D del objeto que se escanea. Esas imágenes 3D se almacenan en el archivo de Lenguaje estándar de teselado (STL). Pero, ¿qué significa "Teselado"? El teselado es el proceso de recubrimiento de una superficie, utilizando una o más formas geométricas, sin superposiciones ni espacios. Significa que el objeto escaneado secopia en detalle con alta confiabilidad y luego se puede imprimir.
ABSTRACT
Several treatment options for replacement of anterior missing teeth exist, varying from no-prep (no preparation) adhesive restorations to implants. Patients' biological, psychological, economic conditions or age have an effect on the treatment choice. It is important to perform the most conservative and beneficial treatment option considering the patient based factors. The aim of this case report was to demonstrate a single session, minimally invasive, cantilevered 2-unit all-ceramic restorations replacing anterior missing teeth combined with the advantages of CAD/CAM technology and materials. (AU)
Existem várias opções de tratamento para reabilitação de dentes anteriores ausentes, variando de restaurações adesivas sem preparo (sem preparação) até implantes. As condições biológicas, psicológicas, econômicas ou a idade dos pacientes têm um efeito na escolha do tratamento. É importante realizar a opção de tratamento mais conservadora e benéfica, considerando os fatores baseados no paciente. O objetivo deste relato de caso foi demonstrar em sessão única, minimamente invasiva, um cantiléver de restaurações de cerâmica pura de 2 unidades, reabilitando a região de dentes anteriores ausentes combinadas com as vantagens da tecnologia CAD/CAM.(AU)
Subject(s)
Humans , Male , Adult , Denture, Partial, Fixed, Resin-Bonded , Dental Prosthesis , Computer-Aided DesignABSTRACT
Nowadays, a lot of people need in reconstruction of the teeth in connection with their loss. Before prosthetics or any other manipulations, a person wants to quickly see the aesthetic appearance of his future tooth. At the moment, many dentists use the option of verbal explanation to the patient, what will look like a smile or a front row of teeth after treatment, but the visual representation of the person remains aside. But now this can be achieved with the help of "Digital smile design", which shows the person the final result of the dentition. This technology has a number of advantages. Some of them are the rapid creation of a prototype model and high accuracy in the manufacture of work. Thanks to these technologies, communication between the specialist and the patient has been facilitated. The digital smile design has simplified the doctor's work process and reduced patient data processing time. From now on, achieving aesthetic results in the reconstruction of teeth for the dentist is not a problem.
Subject(s)
Humans , Decision Making, Computer-Assisted , Tooth Loss/therapy , Denture Design/methods , Dental Prosthesis Design/methods , Computer-Aided Design , Proof of Concept StudyABSTRACT
As the number of elderly population increases, the proportion of edentulous patients is increasing, and the demand for traditional dentures will also increase. Arranging the artificial teeth according to the relationship and shape of the upper and lower alveolar ridge is an important factor increasing the stability of the denture. This case is a 79 year old female patient who wishes to make denture covered by national health insurance for psychological and economical reasons. With the alveolar bone severely atrophic, the dental CAD software was used for accurate diagnosis and the posterior teeth were arranged in a cross bite according to the interalveolar crest line angle by the program. After completion, the denture showed adequate stability and maintenance in periodic examinations and treatment, and the patient also expressed high satisfaction.
Subject(s)
Aged , Female , Humans , Alveolar Process , Denture, Complete , Dentures , Diagnosis , Malocclusion , National Health Programs , Rehabilitation , Tooth , Tooth, ArtificialABSTRACT
Computer aided design and manufacturing and implant surgery using a guide template improve restoration-driven implant treatment procedures. This case utilized those digital technologies to make definitive prostheses for a patient. According to the work flow of digital dentistry, cone beam computed tomography established the treatment plan, which was followed to make the guide template for implant placement. The template guided the implants to be installed as planned. The customized abutments and surveyed fixed restorations were digitally designed and made. The metal framework of the removable partial denture was cast from resin pattern using an additive manufacturing technique, and the artificial resin teeth were replaced with the zirconia onlays for occlusal stability. These full mouth rehabilitation procedures provided functionally and aesthetically satisfactory results for the patient.
Subject(s)
Humans , Computer-Aided Design , Cone-Beam Computed Tomography , Dentistry , Denture, Partial, Removable , Inlays , Mouth Rehabilitation , Mouth , Prostheses and Implants , Tooth , WorkflowABSTRACT
As digital dentistry technology is being developed, it is being used in various ways. This case covers how digital dentistry technology is being applied on the treatment of patients with loss of vertical dimension due to worn dentition and multiple loss of teeth. The loss of vertical dimension was carefully assessed and recovered, and implants were placed with surgical guides, designed considering the final restoration. The movement of the mandibular was measured with the electronic instrument for recording mandibular movement. Wax-up process was done with Naturgemäße Aufwachs-Technik (N.A.T.) and Natural functional reconstruction (N.F.R.). It was scanned, and the provisional restoration was fabricated using Computer-Aided-Design/Computer-Aided-Manufacturing (CAD/CAM) technology, and the adjustment process was done at the clinic to meet with the satisfaction both functionally and esthetically, and then, using double scanning and CAD/CAM technology, it was carried out as a final restoration. As a result, the patient obtained satisfying results, utilizing the benefits of digital dentistry technology and traditional methods.
Subject(s)
Humans , Dentistry , Dentition , Mouth Rehabilitation , Mouth , Tooth Loss , Tooth , Vertical DimensionABSTRACT
CAD/CAM technology has already been used in most areas of prosthetics. The range of CAD/CAM application in denture fabricating process has been gradually increasing since the CAD/CAM technology was introduced for the fabrication of complete dentures in 1994. This paper describes a technique that combines conventional and CAD/CAM technology for the fabrication of complete dentures: the master casts from a conventional impression techniques were scanned first, and the wax denture was fabricated using Amann Girrbach's Ceramill full denture system (fds). The purpose of this paper is to introduce the case in which making an esthetically and functionally satisfied denture in shorter time is possible with CAD/CAM technology.
Subject(s)
Humans , Denture, Complete , Dentures , RehabilitationABSTRACT
After the teeth were extracted, maxillary and mandibular alveolar ridges show the opposite resorption pattern and as a result, the mandibular arch is enlarged than maxillary arch relatively. In this situation, we should evaluate both alveolar ridge relationship and arrange the artificial teeth properly for stability of removable prosthesis. This case is a 77 years old male patient who wishes to make removable prosthesis and has atrophic alveolar ridge. By use of model scanner and CAD software, the angle between interalveolar crest line and occlusal plane was easily measured. Depending on the measurement, the artificial teeth are arranged in unilateral cross bite and after completion, patient was satisfied with the denture which showed proper stability, retention, support.
Subject(s)
Humans , Male , Alveolar Process , Dental Occlusion , Dentures , Malocclusion , Prostheses and Implants , Tooth , Tooth, ArtificialABSTRACT
In edentulous patients, implant - supported fixed prosthesis treatment has been proved to be useful, but involves complex treatment process. On the other hand, in the modern dentistry, digital technology has been developed day by day and it has expanded its range to the implant restoration of edentulous patients. In this case, a digital system was used for all stages of diagnosis, surgery, design and fabrication of provisional implants fixed prosthesis restoration in 66-year-old mandibular edentulous patients. In the preoperative diagnosis stage, a provisional restoration was designed based on the mucosal scan using the intraoral scanner and the stable occlusion of prefabricated complete denture of the patient. After flapless implant surgery using the surgical guide, the prefabricated interim restoration was connected to the implant and used as immediate provisional restoration. The final restoration was designed and fabricated by transferring the vertical dimension and the centric relation of the provisional restoration with stable occlusion using digital technology. We report a simple protocol of implant treatment in edentulous patients by using digital techniques to preserve the patient's vertical dimension and occlusion.
Subject(s)
Aged , Humans , Centric Relation , Dentistry , Denture, Complete , Diagnosis , Hand , Printing, Three-Dimensional , Prostheses and Implants , Vertical DimensionABSTRACT
PURPOSE: Recently, according to the development of digital technology, computer aided design/computer aided manufacture (CAD/CAM) system is widely used for fabrication of various dental prostheses in the field of dentistry. This study aims to survey the present state and awareness of CAD/CAM system on domestic dental field, and to supply the advice for the application of the new system. MATERIALS AND METHODS: In this questionnaire survey was conducted for a total of 298 dentists, dental hygienist and dental technicians of the whole country including the dental hospital of Seoul National University for two months from November to December, 2016 through mail. RESULTS: The most important purpose to consider when purchasing a dental CAD/CAM milling machine were the performance of the milling machine (64.43%) and the use of milling machine was the highest with 49.33% of manufacturing for dental prosthesis and customized implant abutment. In addition, more than 60% of respondents answered positively about the purchase of new milling machine if the CAD/CAM milling machine was improved to satisfactory performance. CONCLUSION: This survey results show that the improved CAD/CAM milling machine would be play an important role in the dental industry in preparation for digitization and the 4th industrial revolution.
Subject(s)
Humans , Dental Hygienists , Dental Prosthesis , Dental Technicians , Dentistry , Dentists , Postal Service , Seoul , Surveys and QuestionnairesABSTRACT
Computational three-dimensional (3D) models of a dental structure generated from 3D dental computed tomography (CT) images are now widely used in digital dentistry. To generate precise 3D models, high-resolution imaging of the dental structure with a dental CT is required. However, a small head motion of the patient during the dental CT scan could degrade the spatial resolution of CT images to the extent that digital dentistry is no longer possible. A bench-top micro-CT has been built to evaluate the head motion effects on the dental CT images. A micro-CT has been built on an optic table with a micro-focus x-ray source and a flat-panel detector. A rotation stage, placed in between the x-ray source and the detector, is mounted on two-directional goniometers that can rotate the rotation stage in two orthogonal directions while the rotation stage is performing the CT scan. The goniometers can make object motions of an arbitrary waveform to simulate head tilting or head nodding. CT images of a phantom have been taken with and without introducing the motions, and the motion effects on the CT images have been evaluated. Object motions parallel to the detector plane have greater effects on the CT images than those against the detector plane. With the bench-top micro-CT, the motion effects have been visually seen at a tiny rotational motion as small as 0.3°. The bench-top micro-CT can be used to evaluate head motion effects on the dental CT images. The projection data, taken with the motion effects, would be used to develop motion artifact correction methods for a high-resolution dental-CT.
Subject(s)
Humans , Artifacts , Dentistry , Head , Tomography, X-Ray ComputedABSTRACT
PURPOSE: To integrate extra-oral facial scanning information with CAD/CAM complete dentures to immediately rehabilitate terminal dentition. MATERIALS AND METHODS: Ten patients with terminal dentition scheduled for total extraction and immediate denture placement were recruited for this study. The patients were submitted to a facial scanning procedure using the in-office PritiMirror scanner with bite registration records in-situ. Definitive stone cast models and bite records were subsequently submitted to a lab scanning procedure using the lab scanner (iSeries DWOS; Dental Wings). The scanned models were used to create a virtual teeth setup of a complete denture. Using the intra-oral bite records as a reference, the virtual setup was incorporated in the facial scan thereby facilitating a virtual clinical evaluation (teeth try-in) phase. After applying necessary adjustments, the virtual setup was submitted to a CAM procedure where a 5-axis industrial milling machine (M7 CNC; Darton AG General) was used to fabricate a full-milled PMMA immediate provisional prosthesis. RESULTS: Total extractions were performed, the dentures were immediately inserted, and subjective clinical fit was evaluated. The immediate provisional prostheses were inserted and clinical fit, occlusion/articulation, and esthetics were subjectively assessed; the results were deemed satisfactory. All provisional prostheses remained three months in function with no notable technical complications. CONCLUSION: Ten patients with terminal dentition were treated using a complete digital approach to fabricate complete dentures using CAD/CAM technology. The proposed technique has the potential to accelerate the rehabilitation procedure starting from immediate denture to final implant-supported prosthesis leading to more predictable functional and aesthetics outcomes.
Subject(s)
Humans , Dentition , Denture, Complete , Dentures , Esthetics , Jaw Relation Record , Mouth Rehabilitation , Mouth , Polymethyl Methacrylate , Prostheses and Implants , Prosthodontics , Rehabilitation , ToothABSTRACT
Digital dentistry has influenced many dental procedures, such as three-dimensional (3D) diagnosis and treatment planning, surgical splints, and prosthetic treatments. Patient-specific protective appliances (PSPAs) prevent dental injury during endotracheal intubation. However, the required laboratory work takes time, and there is the possibility of tooth extraction while obtaining the dental impression. In this technical report, we utilized new digital technology for creating PSPAs, using direct intraoral scanners and 3D printers for dental cast fabrication.
Subject(s)
Dentistry , Diagnosis , Intubation, Intratracheal , Printing, Three-Dimensional , Splints , Tooth ExtractionABSTRACT
The digital workflow in dentistry allows for complete digital processing of the restoration starting with the digital impression using an intraoral scanner to until the fabrication of final reconstruction. Recent advances in 3D printing technologies opened new possibilities also for dental technicians through which wax-up and casting procedures in the laboratories could be eliminated. In this clinical report, a technique is described where the pattern was fabricated using additive manufacturing for pressed lithium disilicate onlay restorations. (AU)
O fluxo de trabalho digital em odontologia permite o processamento digital completo da restauração começando com a impressão digital usando um scanner intraoral até a fabricação da peça final. Os avanços recentes nas tecnologias de impressão 3D abriram novas possibilidades também para os técnicos em prótese dentária através dos quais os procedimentos de cera e fundição nos laboratórios poderiam ser eliminados. Neste relato de caso clínico, descreve-se uma técnica onde o padrão foi fabricado usando a fabricação de aditivos para restaurações do tipo onlay em dissilicato de lítio injetadas. (AU)
Subject(s)
Humans , Male , Adult , Printing, Three-Dimensional , Cracked Tooth Syndrome/diagnostic imaging , Inlays/methodsABSTRACT
Introdução: diante da dificuldade observada pelos cirurgiões- -dentistas, relacionada a compreensão dos responsáveis do paciente quanto a real condição da saúde bucal e a importância de realizar os tratamentos que são definidos pelos profissionais, foi criado o Teste do Dentinho. Objetivo: a proposta deste estudo, foi realizar por meio de um interpretador digital dos dados da saúde bucal com base em um exame odontológico, um instrumento para oferecer aos responsáveis dos pacientes uma visão individualizada, detalhada e de fácil compreensão. Método: a amostra constituiu-se de 50 pacientes, com idade entre 0 e 7 anos, atendidos na clínica de odontope diatria, acompanhados de um responsável. Foi realizada a coleta de dados pessoais e o exame clínico no paciente por meio da utilização de um odontograma digital para os cálculos do Índice de Funcionalidade dos Dentes (IFD) e do Nível de Risco (NR). O paciente e os responsáveis puderam acompanhar a coleta e inserção dos dados, bem como os resultados no momento da execução do exame. Resultados e Discussão: foi observado que 90% dos entrevistados responderam que a apresentação dos resultados do instrumento foi ótima e 10% responderam que é boa. Conclusão: a compreensão diagnóstica se torna facilitada com o Teste do Dentinho. Gerando estes dados, aos Cirurgiões Dentistas e os responsáveis, poderão realizar juntos os comparativos de dados coletados a cada consulta odontológica, proporcionando uma visão educativa e assertiva da saúde bucal do paciente.
Introduction: because of patient´s difficulties on understanding their responsibility on oral health conditions, as well as difficulties about the importance of having treatments suggested by the professionals, the Tooth Test was created. Objective: the purpose of this study was to perform, through a data digital interpreter based on a dental examination, an instrument to offer the patients´ tutors a detailed and individual view with easy understanding. Method: the sample consisted of 50 patients, aged between 0 and 07 years, seen at the Pediatric Dentistry Clinic, accompanied by a tutor. Personal data collection and clinical examination were performed on the patient using a digital Odontogram to calculate the teeth functionality index and the risk level. The patients and tutors could observe and follow the collection and insertion of data, as well as the results at the moment of the examination. Results: it was observed that 90% of the interviewed considered the results of the instrument excellent and 10% considered good. Thus, the diagnostic comprehension becomes easier with the tooth test. Conclusion: the dental surgeon and those in charge, will be able to compare collected data in every dental appointment, providing an educative and assertive view of the patient´s oral health.