The ion partition detected in homeopathically manufactured medicine cuprum metallicum and controls

Homeopathy is highly controversial. The main reason for this is its use of very highly dilute medicines (high homeopathic potencies, HHP), diluted beyond the Avogadro/Loschmidt limit. Research using Nano Tracking Analysis has demonstrated the presence of particles in HHPs. This study aims to verify the results of a previous publication that identified the ionic composition of these particles in all dilutions. We used Scanning Electron Microscopy & Energy Dispersive X-Ray Spectroscopy (SEM-EDX) to examine dilutions of a commonly used homeopathic medicine, an insoluble metal, Cuprum metallicum, for the presence of particles (NPs). The homeopathic medicines tested were specially prepared according to the European pharmacopoeia standards. We compared the homeopathic dilutions/dynamizations of copper with simple dilutions and dynamized lactose controls. We observed an ionic diversity common to all preparations including HHPs but also significant differences in the relative quantity of each ion between manufacturing lines of homeopathic copper and lactose controls. The probability that the observed differences could have occurred chance alone (especially above Avogadro limit) can be rejected at p < 0.001. The essential component of these homeopathic medicines is sodium hydrogen carbonate, modulated by some other elements and by its quantity, size and shape. Homeopathic medicines made of Cuprum metallicum do contain material with a specific ionic composition even in HHPs diluted beyond the Avogadro/Loschmidt limit. This specificity can be attributed to the manufacturing process. This material demonstrates that the step-by-step process (dynamized or not) does not match the theoretical expectations of a dilution process. The starting material and dilution/dynamization method influences the nature of these NPs. Further measurements are needed on other raw materials using the same controls (solvent and simply diluted manufacturing lines) to support these findings. The role of sodium bicarbonate must be carefully studied in the future.

The Materiality of Homeopathic Medicines. DynHom Research Program

Homeopathy is controversial because using highly dilute medicines (high homeopathic potencies, HHP) beyond the Avogadro/Loschmidt limit. Previous publications [1,2] using NMR relaxation revealed the involvement of nanobubbles and/or nanoparticles and/or nanometric superstructures in high potentizations. Nano Tracking Analyse (NTA) demonstrated the presence of particles in HHPs [3,4]. WithSEM-EDX [5] we observed an ionic diversity common to all preparations including HHPs and significant differences in the relative quantity of each ion between different homeopathic manufacturing lines and controls. FTIR spectroscopy [6] shows that the molecular composition is that of carbonates, primarily sodium bicarbonate.Methods:To observe the materiality of homeopathic medicines a multidisciplinary approach is necessary. In collaboration with several universities,we canobserve these medications with NMR, NTA, SEM-EDX, FTIR, pH,and EPA. Results:The essential component of all already studied homeopathic medicines is sodium hydrogen carbonate modulated by some other elements in a specific quantity, size,and shape. The probability that the observed results could have occurred just by random chance can be rejected(significantlyabove the Avogadro limit) p < 0,001.Conclusions:The homeopathic medicines do contain material with a specific ionic composition even in HHPs diluted beyond the Avogadro/Loschmidt limit. This specificity can be attributed to the manufacturing process. These results demonstrate that the step-by-step process (dynamized or not) does not match the theoretical expectations in a dilution process. The starting material and dilution/dynamization method influencethe nature of these NPs. The role of carbonates and sodium bicarbonate must be carefully studied in the future. Its aqueous solution is alkaline in nature but itis an amphoteric compound, which means that the compound has both acidic as well as alkaline character. The reaction with acids results in sodium salts and carbonic acid and the reaction with the basic solution producescarbonates and water. Specific electric fields are indeed detectable.

Particle characterisation of traditional homeopathically manufactured medicine cuprum metallicum and controls

Homeopathy is highly controversial. The main reason for this is its use of very highly dilute medicines (high homeopathic potencies, HHP), diluted beyond the Avogadro/Loschmidt limit. Research using several different methods has demonstrated the presence of particles, including nanoparticles of source material, in HHPs. This study aims to verify the results of a previous publication that detected the presence of particles in all dilutions. We used the Nano Tracking Analyzer (NTA) to examine dilutions of a commonly used homeopathic medicine, an insoluble metal, Cuprum metallicum, for the presence of particles. The homeopathic medicines tested were specially prepared according to the European pharmacopoeia standards. We compared the homeopathic dilutions/dynamizations with simple dilutions and controls including a soluble medicine. We observed the presence of solid material in all preparations including HHPs (except for pure water). The measurements showed significant differences in particle sizes distribution between homeopathic manufacturing lines and controls. Homeopathic medicines do contain material with a specific size distribution even in HHPs diluted beyond the Avogadro/Loschmidt limit. This specificity can be attributed to the manufacturing and potentization process. This material demonstrates that the step-by-step process (dynamized or not) does not match the theoretical expectations in a dilution process. The starting material and dilution/dynamization method influences the nature and concentration of these NPs.

Finite Element Analysis of a Controlled Dynamization Device for External Circular Fixation / Análise de elementos finitos de um dispositivo de dinamização controlada para fixação circular externa

Abstract Objective To virtually prototype a device for external circular fixation of long bone fractures with controlled dynamization made of two different materials and predict their mechanical behavior by using the finite element analysis (FEA) method. Method A software was used for 3D modeling two metal parts closely attached by a sliding dovetail joint and a high-density silicone damper. Distinctive FEAs were simulated by considering two different materials (stainless steel or titanium), modes (locked or dynamized) and loading conditions (static/point or dynamic/0.5 sec) with uniform 150 kg axial load on top of the device. Results The finite elements (FEs) model presented 81,872 nodes and 45,922 elements. Considering stainless steel, the maximum stress peak (140.98 MPa) was reached with the device locked under static loading, while the greatest displacement (2.415 × 10−3 mm) was observed with the device locked and under dynamic loading. Regarding titanium, the device presented the maximum stress peak (141.45 MPa) under static loading and with the device locked, while the greatest displacement (3.975 × 10−3 mm) was found with the device locked and under dynamic loading. Conclusion The prototyped device played the role of stress support with acceptable deformation in both locked and dynamized modes and may be fabricated with both stainless steel and titanium.

Resumo Objetivo Construir um protótipo virtual de um dispositivo de fixação circular externa para fraturas em ossos longos com dinamização controlada a partir de dois materiais diferentes e prever seu comportamento mecânico por meio da análise de elementos finitos AEF). Método Modelos tridimensionais compostos de duas peças metálicas unidas por uma junta deslizante em rabo de andorinha e um amortecedor de silicone de alta densidade foram criados em um software. Análises de elementos finitos distintas foram simuladas considerando dois materiais (aço inoxidável ou titânio), modos (bloqueado ou dinamizado) e condições de carregamento (estático/pontual ou dinâmico/0,5 segundo) diferentes com carga axial uniforme de 150 kg na porção superior do dispositivo. Resultados O modelo de elementos finitos (EFs) apresentou 81.872 nós e 45.922 elementos. Com aço inoxidável, o pico de tensão máxima (140,98 MPa) foi alcançado com o dispositivo bloqueado e sob carga estática, enquanto o maior deslocamento (2.415 × 10−3 mm) foi obtido com o dispositivo bloqueado e sob carga dinâmica. Com titânio, o pico de tensão máxima (141,45 MPa) ocorreu com o dispositivo bloqueado e sob carga estática, enquanto o maior deslocamento (3.975 × 10−3 mm) foi observado com o dispositivo bloqueado e sob carga dinâmica. Conclusão O protótipo do dispositivo desempenhou o papel de suporte de tensão com deformação aceitável nos dois modos, bloqueado ou dinamizado, e pode ser fabricado com aço inoxidável ou titânio.

The dynamization of external fixation for treatment of open tibia and fibula fractures / 中国修复重建外科杂志

Results: All patients were followed up 4-13 months, with an average of 5.7 months. During the treatment, there was no complication such as loosening or breaking of the external fixator, fracture displacement, or re-fracture in 2 groups. The using time of external fixator in group A was (24.77±1.42) weeks and the fracture healing time was (23.04±1.30) weeks, which were all significantly reduced when compared with those in group B [(34.38±1.71) weeks and (32.46±1.66) weeks] ( t=16.10, P=0.00; t=15.58, P=0.00). In group A, there were 2 cases of needle tract infection and 1 case of muscle weakness, the incidence of complication was 23.1%; in group B, there were 3 cases of needle tract infection, 1 case of muscle weakness, and 1 case of delayed union of fracture, the incidence of complication was 38.5%; there was no significant difference in the incidence of complication between 2 groups ( P=1.000).

A comparative study of patients with tibial shaft fracture underwent interlocking intramedullary nail postoperative between dynamization and non-dynamization / 重庆医学

Objective To prospectively compare the clinical outcome of dynamization and non-dynamization of interlocking intr-amedullary nail on union of tibial shaft fractures (fracture gap0 .05];16 weeks after internal fixation surgery ,VAS score of the dynamization group was statistically higher than that of the non-dynamization group [(4 .1 ± 0 .6) vs .(2 .3 ± 0 .8) ,t=16 .100 ,P<0 .05];the knee pain rate of the dynamization group was statistically higher than that of the non-dynamization group (28 .7% vs .12 .9% ,χ2 =5 .764 ,P<0 .05) .Conclusion When treating tibial shaft fractures with closed reduction and intramedullary nail fixation ,the main fracture gap<2 .0 mm ,early dynamization didn′t have any advantage .

Study on influence of early dynamization of interlocking intramedullary nail on treatment effect of lower limb fracture / 重庆医学

Objective To study the influence of early dynamization of interlocking intramedullary nail on the treatment effect of the patients with lower limb fracture .Methods 62 patients with lower limb fracture treated with interlocking intramedullary nail in our hospital from June 2010 to March 2012 were selected as the research subjects and divided into the control group and the obser-vation group with 31 cases in each group according to random number table .The control group was treated with routine treatment method ,while the observation group was treated with early dynamization .Then the Johner-Wruch score ,healing time ,rate of ad-verse fracture healing ,incidence rate of complications and fracture healing related factors before and after the treatment were ana-lyzed and compared .Results The Johner-Wruch score excellent and good rate of the observation group was higher than that of the control group ,the healing time was shorter than that of the control group ,the rate of adverse fracture healing and the incidence rate of complications were lower than those of the control group ,the fracture healing related factors after treatment were all better than those of the control group ,the differences had statistical significance (all P<0 .05) .Conclusion The early dynamization of interloc-king intramedullary nail has the better effect for treating lower limb fracture and its influence on the fracture healing related factors is better too .

A research into early dynamization of interlocking intramedullary nail for treatment of tibial shaft fractures / 中华创伤骨科杂志

Objective To retrospectively evaluate effects of early dynamization of interlocking intramedullary nail on union of tibial shaft fractures.Methods From January 2002 to Septemher 2004,75 patients with tibial shaft fractures were treated in our department with internal fixation using static interlocking iutramedullary nails.Early dy- namization(6 to 10 weeks postoperative)was adopted in 32 patients (the dynamic group) according to the fracture con- ditions,while the other 43 patients were treated without early dynamization (the non-dynamic group).The healing time of fractures and the rate of delayed union in both groups were documented.Results All the cases were followed up for a mean duration of 6.5 months (range,4 to 13 months).The mean healing time was 115.6 days (range,105 to 126 days) in the dynamic group and 124.5 days (range,119 to 133 days) in the non-dynamic group.The difference was statistically significant between the two groups (P＜0.05).There were two cases (6.2%) of delayed union in the dynamic group and four (9.4%) in the non-dynamic group.The difference was not significant (P＞0.05). Conclusion Early dynamization of interlocking intramedullary nail can promote union of tibial shaft fractures.

Changes of Bone Meneral Density of the Distraction Gap and Adjacent Parent Bone in Callotasis of the Cnanine Tibia / 대한정형외과학회잡지

The purpose of this study are to delineate the temporal and spatial changes of bone mineralization at the distraction gap and adjacent parent bone, and to investigate the effect of microaxial dynamization on regenerate bone healing and on development of regional osteopenia at the adjacent parent bone, during callotasis. Sixteen Korean adult mongrel dogs underwent bilateral tibial lengthening by callotasis. To the right hindlimbs, no dynamization was applied and served as control group (group I, and axial elastic dynamization was conffered to the left hindlimbs (group II). Bone mineral density(BMD) was measured by dual X-ray absorptionmetry(DXA) at immediate post-operative day, post-operative 12 day, 22 day, 36 day, 50 day, 65 day, and 85 day. Quantitative computed tomogram(Q-CT) was also taken after sacrifice to analyze temporal changes of mineralization pattern in the distraction gap. The following results were obtained; 1. In both group I and II, the BMD was lowest at the interzone in the distraction gap and increased linearly toward the corticotomy surface. This pattern did not change with time until the consolidation of the distraction gap, but the difference of BMD between the interzone and adjacent parent bone decreased with progress of consolidation. 2. During the distraction period, BMD increased progressively at the distraction gap and adjacent parent bone in both group I and II. During consolidation period, although BMD of the distraction gap still increased progressively, that of the adjacent parent bone decreased progressively in group I; the more distant from the corticotomy surface, the more decreased the relative BMD. in group II, the decrease in BMD of the adjacent parent bone was less than that in group I which was statistically significant in mid-consolidation period. In conclusion, the new bone in the distraction gap during callotasis appeared to form in bilateral direction with linear gradient from interzone toward corticotomy surface. Dynamization during callotasis not only stimulated regenerate bone healing in the distraction gap, but also prevented the occurrence of transient regional osteopenia at the distant part of the adjacent bone during midconsolidation period.

Dynamization After Static Interlocking Intramedullary Nailing / 대한정형외과학회잡지

The purpose of this study is to make an emphasis the necessity of the dynamization after interlocking intramedullary nailing. We reviewed 75 cases of the fractures of the shaft of femur or tibia fixed with static interlocking intramedullary nailing. We excluded the cases in whom the locking screws were removed for the purpose of the relief of pain from the irriataion by those screws. The parameter we reviewed were the type of fracture, postoperative gap between the major fragments. Early callus formation, the union time, postoperative dynamization and controlled weight bearing. In those cases in which the contact surface between the major fragments was more than 50% and there noticed no early callus within 6 weeks after operation, the union time was shortened after dynamization, when the contact surface was less than 50% and there noticed no early callus, the union time was shortened after bone graft and dynamization which resulted in some shortening in the length in acceptable ranges. In cases with a major gap of more than 2mm, the union time was shortened after dynamization. The rate of early callus formation was a little higher in cases with postoperative controlled weight bearing than those to whom we did not permit a controlled weight bearing.

The Effect of Controlled Elastic Dynamization on Regenerate Bone Healing in Distraction Osteogenesis of Canine Tibia / 대한정형외과학회잡지

In order to investigate wheter or not elastic dynamization by axial micromotion enhanced regenerate bone healing in distraction osteogenesis(callotasis), a unilateral external fixator, with which the magnitude of dynamization could be controlled, was applied to the tibiae of 12 Korean adult mongrel dogs, weighting approximately 35kg. Tibiae and fibulae of both sides were osteotomized at the proximal metaphysio-diaphyseal junction and fixed with unilateral external fixators. Distraction was started from the third postoperative day until 2 cm (10% of tibial length) of length gian was achived, at the rate of 0. mm twice a day. When 1 cm (5%) of lengthening was achieved, controlled elastic dynamization of 1 mm (group I), 2 mm (group II), and 3 mm (group III) in magnitude was allowed on left tibia. Right tibia was not dynamized until sacrifice, and served as a control for each group. Plain anteroposterior radiographs and measurements of bone mineral density(BMD) by dual x-ray absorptiometry(DXA) were obtained pre- and post-operatively. Relative ratio of BMD was calculated, dividing the BMD value measured in each period by the BMD value measured at the beginning of dynamization. Mechanical test was performed in uniaxial compression on an Instron machine. Following observations were made: 1. Plain anteroposterior radiography showed that at mid-consolidation phase (postoperative 50th day) the width of callus in the distraction gap increased significantly in all dynamization groups, as compared to their control groups(p 0.05). 3. Axial Compression test revealed that the dynamization group had significantly increased stiffness, maximal load, elastic modulus, and strength, as compared to those of the control group(p < 0.05). In conclusion, controlled elastic dynamization effectively enhances regenerate bone healing in distraction osteogenesis of canine tibia, at 1 mm to 3 mm of magnitude.