ELEMENTAL CONCENTRATION OF PACKAGED MEALS (BAKED ANDEXTRUDED GOODS MADE USING COMPOSITE CEREAL-PULSE FLOUR) PROCURED AT DEBRE TABOR MARKETPLACES IN ETHIOPIA

The elemental analysis of packed food items which is collected in Debre Tabor markets, Ethiopia namely Pasta, Macaroni, cookies, biscuit, wheat bread, white teff injera, Red teff injera, barley so, barleycorn and maiz bread samples were carried out using EDX spectrometer. An X-ray beam was used to excite each sample and spectra were recorded with a high-resolution Si(Li) detector. The data analysis was carried out by software. Trace elements P, K, Na, Cl, Mg, Ca, Fe, Al and Zn were estimated, and elemental concentrations were determined. To get the exact results of the present study the analysis repeats three times.

The ion partition detected in homeopathically manufactured medicine cuprum metallicum and controls

Homeopathy is highly controversial. The main reason for this is its use of very highly dilute medicines (high homeopathic potencies, HHP), diluted beyond the Avogadro/Loschmidt limit. Research using Nano Tracking Analysis has demonstrated the presence of particles in HHPs. This study aims to verify the results of a previous publication that identified the ionic composition of these particles in all dilutions. We used Scanning Electron Microscopy & Energy Dispersive X-Ray Spectroscopy (SEM-EDX) to examine dilutions of a commonly used homeopathic medicine, an insoluble metal, Cuprum metallicum, for the presence of particles (NPs). The homeopathic medicines tested were specially prepared according to the European pharmacopoeia standards. We compared the homeopathic dilutions/dynamizations of copper with simple dilutions and dynamized lactose controls. We observed an ionic diversity common to all preparations including HHPs but also significant differences in the relative quantity of each ion between manufacturing lines of homeopathic copper and lactose controls. The probability that the observed differences could have occurred chance alone (especially above Avogadro limit) can be rejected at p < 0.001. The essential component of these homeopathic medicines is sodium hydrogen carbonate, modulated by some other elements and by its quantity, size and shape. Homeopathic medicines made of Cuprum metallicum do contain material with a specific ionic composition even in HHPs diluted beyond the Avogadro/Loschmidt limit. This specificity can be attributed to the manufacturing process. This material demonstrates that the step-by-step process (dynamized or not) does not match the theoretical expectations of a dilution process. The starting material and dilution/dynamization method influences the nature of these NPs. Further measurements are needed on other raw materials using the same controls (solvent and simply diluted manufacturing lines) to support these findings. The role of sodium bicarbonate must be carefully studied in the future.

The Materiality of Homeopathic Medicines. DynHom Research Program

Homeopathy is controversial because using highly dilute medicines (high homeopathic potencies, HHP) beyond the Avogadro/Loschmidt limit. Previous publications [1,2] using NMR relaxation revealed the involvement of nanobubbles and/or nanoparticles and/or nanometric superstructures in high potentizations. Nano Tracking Analyse (NTA) demonstrated the presence of particles in HHPs [3,4]. WithSEM-EDX [5] we observed an ionic diversity common to all preparations including HHPs and significant differences in the relative quantity of each ion between different homeopathic manufacturing lines and controls. FTIR spectroscopy [6] shows that the molecular composition is that of carbonates, primarily sodium bicarbonate.Methods:To observe the materiality of homeopathic medicines a multidisciplinary approach is necessary. In collaboration with several universities,we canobserve these medications with NMR, NTA, SEM-EDX, FTIR, pH,and EPA. Results:The essential component of all already studied homeopathic medicines is sodium hydrogen carbonate modulated by some other elements in a specific quantity, size,and shape. The probability that the observed results could have occurred just by random chance can be rejected(significantlyabove the Avogadro limit) p < 0,001.Conclusions:The homeopathic medicines do contain material with a specific ionic composition even in HHPs diluted beyond the Avogadro/Loschmidt limit. This specificity can be attributed to the manufacturing process. These results demonstrate that the step-by-step process (dynamized or not) does not match the theoretical expectations in a dilution process. The starting material and dilution/dynamization method influencethe nature of these NPs. The role of carbonates and sodium bicarbonate must be carefully studied in the future. Its aqueous solution is alkaline in nature but itis an amphoteric compound, which means that the compound has both acidic as well as alkaline character. The reaction with acids results in sodium salts and carbonic acid and the reaction with the basic solution producescarbonates and water. Specific electric fields are indeed detectable.

Evaluación de la mineralización en mandíbula y diente de trucha arcoíris (Oncorhynchus mykiss) mediante microscopía electrónica de barrido de presión variable acoplada a detector de espectroscopía de rayos X de energía dispersiva / Evaluation of mineralization in jaw and teeth of rainbow trout (Oncorhynchus mykiss) using variable pressure scanning electron microscopy coupled to energy-dispersive X-ray spectroscopy detector

RESUMEN: En salmonicultura se utilizan imágenes de rayos X, para evaluar la columna vertebral y las aletas, pero estas no permiten cuantificar los minerales que constituyen el hueso, para esto se utilizan otras técnicas que son destructivas. La Microscopía Electrónica de Barrido de presión variable (VP SEM) acoplada al detector espectroscopia de rayos X de energía dispersiva (EDX) acoplado, nos permite analizar la microestructura y a la vez determinar elementos químicos, porcentaje y distribución presentes en puntos específicos en una muestra. Se utilizaron 5 truchas control y 5 con deformidad mandibular, de agua dulce en etapa de smolt, se analizó la estructura y mineralización del hueso, se eligieron en promedio 6 puntos de cuantificación por región de interés y se analizaron mediante Microscopía Electrónica de Barrido (VP SEM-EDX). Los datos obtenidos muestran porcentaje en masa de Ca promedio en hueso articular de truchas fueron de 8.07 % y de 14.48 % en truchas con deformidad mandibular y control respectivamente y el porcentaje en masa promedio de P es de 4.07 % y 7.60 %, en truchas con deformidad mandibular y control respectivamente. Se identificó además otros elementos presentes en la muestra como Mg, Na, C, O, N, S, F, Zn, Al y Fe, con especial interés en el aumento de carbono en las muestras analizadas con deformidad mandibular y la presencia de aluminio en todas las muestras. La Técnica de VP SEM-EDX, permite evaluar de forma directa, sin destrucción de la muestra y con una preparación mínima de la muestra. En el hueso, la aplicación más frecuente de SEM-EDX es la medición del contenido de Ca y P y la relación que existe entre estos elementos Ca/P, en la muestra. Paralelamente la técnica nos permite la detección de otros microelementos provenientes del agua o de la alimentación y que eventualmente pueden provocar alteraciones en los peces, confirmando la hipótesis que el microanálisis elemental tiene utilidad para la salmonicultura.

SUMMARY: In salmon farming systems, X-ray images are used to evaluate the spine and fins, but these do not allow quantifying the minerals that make up the bone, for different techniques that are destructive are used. Variable Pressure Scanning Electron Microscopy (VP SEM) coupled to an Energy Dispersive X-ray spectroscopy detector (EDX), allows us to analyze the microstructure and at the same time determine chemical elements, percentages, and distribution present at specific points in a sample. Five control and five jaw deformity trout, from freshwater and in the smolt stage were used. The structure and mineralization of the bone were analyzed, an average six quantification points were chosen per region of interest (ROI) and then they were analyzed by Scanning Electron Microscopy (VP SEM-EDX). The data obtained have shown the average mass percentage of calcium in trout joint bone was 8.07 % and 14.48 % in jaw deformity and control trout, respectively; and the average mass percentage of phosphorus is 4.07 % and 7.60 %, in jaw deformity and control trout, respectively. Other elements present in the sample were also identified, such as magnesium, sodium, carbon, oxygen, nitrogen, sulphur, fluorine, zinc, aluminium, and iron, with special interest the increase of carbon in the analyzed samples with mandibular deformity and the presence of aluminum in all samples. The VP SEM-EDX Technique allows direct evaluation, without destruction of the sample and with minimal sample preparation. In bone, the most frequent application of SEM-EDX is the measurement of the content of calcium (Ca) and phosphorus (P) and the relationship that exists between these elements, calcium/phosphorus (Ca/P), in the sample. At the same time, the technique allows us to detect other microelements from water or food that can eventually cause alterations in fish, confirming the hypothesis that elemental microanalysis is useful for salmon farming.

One-pot synthesis of silver nanocomposites from Achyranthes aspera: An eco-friendly larvicide against Aedes aegypti L

Objective: To formulate silver nanocomposites from Achyranthes aspera leaf extracts and evaluate its larvicidal activity against Aedes aegypti. Methods: The silver nanocomposites were synthesized from Achyranthes aspera leaf extracts. The process was optimized and traced through UV-visible and photon correlation spectroscopy. The larvicidal potential of silver nanocomposites of Achyranthes aspera leaf extracts was assessed against the early fourth instars of Aedes aegypti and three non-target organisms. Furthermore, the most effective and eco-safe nanocomposite was characterized by different biophysical techniques including scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier transform-infrared spectroscopy (FT-IR). Results: The formulated silver nanocomposites exhibited efficient larvicidal efficacy against Aedes aegypti. Bioassay with silver nanocomposites formulated using different AgNO 3 concentrations (3, 4, and 5 mM) revealed respective LC

One-pot synthesis of silver nanocomposites from Achyranthes aspera: An eco-friendly larvicide against Aedes aegypti L

Objective: To formulate silver nanocomposites from Achyranthes aspera leaf extracts and evaluate its larvicidal activity against Aedes aegypti.Methods: The silver nanocomposites were synthesized from Achyranthes aspera leaf extracts. The process was optimized and traced through UV-visible and photon correlation spectroscopy. The larvicidal potential of silver nanocomposites of Achyranthes aspera leaf extracts was assessed against the early fourth instars of Aedes aegypti and three non-target organisms. Furthermore, the most effective and eco-safe nanocomposite was characterized by different biophysical techniques including scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier transform-infrared spectroscopy (FT-IR). Results: The formulated silver nanocomposites exhibited efficient larvicidal efficacy against Aedes aegypti. Bioassay with silver nanocomposites formulated using different AgNO3 concentrations (3, 4, and 5 mM) revealed respective LC50 values of 37.570, 6.262 and 1.041 μg/mL; 5.819, 1.412 and 0.489 μg/mL; and 5.519, 1.302 and 0.267 μg/mL after 24, 48 and 72 h. The silver nanocomposites with 4 mM AgNO3 were selected for characterization. SEM and TEM analysis revealed spherical, poly-dispersed structure with varied diameters of 1-25 nm. The XRD analysis established the crystalline and face-centred-cubic structure of silver nanocomposites with the maximum peak at a 2θ value of 37.42°. The EDX pattern showed the presence of Ag, O and C in the nanocomposites in their order of weight％. The FT-IR displayed visibly distinct peaks in different ranges demonstrating the intricacy of silver nanocomposites. In addition, the lethal concentrations of silver nanocomposites of Achyranthes aspera leaf extracts against Aedes aegypti larvae were non-toxic to non-target organisms including Gambusia affinis, Daphnia magna and Moina macrocopa. Conclusions: Silver nanocomposites synthesized with leaf extract of Achyranthes aspera provide a cost-effective and eco-safe alternative to conventional insecticides, and can be utilized as a potent mosquito nano-larvicide.

Bioflocculant production from Streptomyces platensis and its potential for river and waste water treatment

ABSTRACT A bacterium isolated from Sterkfontein dam was confirmed to produce bioflocculant with excellent flocculation activity. The 16S rDNA nucleotide sequence analyses revealed the bacteria to have 99% similarity to Streptomyces platensis strain HBUM174787 and the sequence was deposited in the Genbank as Streptomyces platensis with accession number FJ 486385.1. Culture conditions for optimal production of the bioflocculant included glucose as a sole carbon source, resulting in flocculating activity of 90%. Other optimal conditions included: peptone as nitrogen source; presence of Mg2+ as cations and inoculum size of 1.0% (v/v) at neutral pH of 7. Optimum dose of the purified bioflocculant for the clarification of 4 g/L kaolin clay suspension at neutral pH was 0.2 mg/mL. Energy Dispersive X-ray analysis confirmed elemental composition of the purified bioflocculant in mass proportion (%w/w): carbon (21.41), oxygen (35.59), sulphur (26.16), nitrogen (0.62) and potassium (7.48). Fourier Transform Infrared Spectroscopy (FTIR) indicated the presence of hydroxyl, carboxyl, methoxyl and amino group in the bioflocculant. The bioflocculant produced by S. platensis removed chemical oxygen demand (COD) in river water and meat processing wastewater at efficiencies of 63.1 and 46.6% respectively and reduced their turbidity by 84.3 and 75.6% respectively. The high flocculating rate and removal efficiencies displayed by S. platensis suggests its industrial application in wastewater treatment.

Characterization of coal fly ash nanoparticles and their induced in vitro cellular toxicity and oxidative DNA damage in different cell lines.

Coal combustion generates considerable amount of ultrafine particles and exposure to such particulate matter is a major health concern in the developing countries. In this study, we collected nano sized coal fly ash (CFA) and characterized them by scanning electron microscope-energy dispersive X-ray analysis (SEM-EDX), particle size analyzer (PSA) and transmission electron microscope (TEM), and investigated its toxicity in vitro using different cell lines. The imaging techniques showed that the coal fly ash nanoparticles (CFA-NPs) are predominately spherical shaped. The analyses have revealed that the CFA-NPs are 7-50 nm in diameter and contain several heavy metals associated with CFA particles. The studies showed significant amount of toxicity in all cell lines on treatment with CFA-NPs. The cytotoxicity and oxidative DNA damage caused by CFA-NPs were determined by inhibition of cellular metabolism (MTT), total intracellular glutathione (GSH), reactive oxygen species (ROS) and DNA fragmentation in cultured cell lines (Chang liver, HS294T and LL29). The cellular metabolism was inhibited in a dose-dependent manner in CFA-NPs treated cell lines. The CFA-NPs induced ROS and decreased the total intracellular glutathione with increased dose. Further, the CFA-NPs treated cells showed severe DNA laddering as a result of DNA fragmentation.

Microscopical and chemical surface characterization of CAD/CAM zircona abutments after different cleaning procedures. A qualitative analysis

PURPOSE: To describe and characterize the surface topography and cleanliness of CAD/CAM manufactured zirconia abutments after steaming and ultrasonic cleaning. MATERIALS AND METHODS: A total of 12 ceramic CAD/CAM implant abutments of various manufacturers were produced and randomly divided into two groups of six samples each (control and test group). Four two-piece hybrid abutments and two one-piece abutments made of zirconium-dioxide were assessed per each group. In the control group, cleaning by steam was performed. The test group underwent an ultrasonic cleaning procedure with acetone, ethyl alcohol and antibacterial solution. Groups were subjected to scanning electron microscope (SEM) analysis and Energy-dispersive X-ray spectroscopy (EDX) to verify and characterize contaminant chemical characterization non-quantitatively. RESULTS: All zirconia CAD/CAM abutments in the present study displayed production-induced wear particles, debris as well as organic and inorganic contaminants. The abutments of the test group showed reduction of surface contamination after undergoing an ultrasonic cleaning procedure. However, an absolute removal of pollutants could not be achieved. CONCLUSION: The presence of debris on the transmucosal surface of CAD/CAM zirconia abutments of various manufacturers was confirmed. Within the limits of the study design, the results suggest that a defined ultrasonic cleaning process can be advantageously employed to reduce such debris, thus, supposedly enhancing soft tissue healing. Although the adverse long-term influence of abutment contamination on the biological stability of peri-implant tissues has been evidenced, a standardized and validated polishing and cleaning protocol still has to be implemented.

Microscopical and chemical surface characterization of CAD/CAM zircona abutments after different cleaning procedures. A qualitative analysis

PURPOSE: To describe and characterize the surface topography and cleanliness of CAD/CAM manufactured zirconia abutments after steaming and ultrasonic cleaning. MATERIALS AND METHODS: A total of 12 ceramic CAD/CAM implant abutments of various manufacturers were produced and randomly divided into two groups of six samples each (control and test group). Four two-piece hybrid abutments and two one-piece abutments made of zirconium-dioxide were assessed per each group. In the control group, cleaning by steam was performed. The test group underwent an ultrasonic cleaning procedure with acetone, ethyl alcohol and antibacterial solution. Groups were subjected to scanning electron microscope (SEM) analysis and Energy-dispersive X-ray spectroscopy (EDX) to verify and characterize contaminant chemical characterization non-quantitatively. RESULTS: All zirconia CAD/CAM abutments in the present study displayed production-induced wear particles, debris as well as organic and inorganic contaminants. The abutments of the test group showed reduction of surface contamination after undergoing an ultrasonic cleaning procedure. However, an absolute removal of pollutants could not be achieved. CONCLUSION: The presence of debris on the transmucosal surface of CAD/CAM zirconia abutments of various manufacturers was confirmed. Within the limits of the study design, the results suggest that a defined ultrasonic cleaning process can be advantageously employed to reduce such debris, thus, supposedly enhancing soft tissue healing. Although the adverse long-term influence of abutment contamination on the biological stability of peri-implant tissues has been evidenced, a standardized and validated polishing and cleaning protocol still has to be implemented.

Mechanical and interfacial characterization of laser welded Co-Cr alloy with different joint configurations

PURPOSE: The mechanical and interfacial characterization of laser welded Co-Cr alloy with two different joint designs. MATERIALS AND METHODS: Dumbbell cast specimens (n=30) were divided into 3 groups (R, I, K, n=10). Group R consisted of intact specimens, group I of specimens sectioned with a straight cut, and group K of specimens with a 45degrees bevel made at the one welding edge. The microstructure and the elemental distributions of alloy and welding regions were examined by an SEM/EDX analysis and then specimens were loaded in tension up to fracture. The tensile strength (TS) and elongation (epsilon) were determined and statistically compared among groups employing 1-way ANOVA, SNK multiple comparison test (alpha=.05) and Weibull analysis where Weibull modulus m and characteristic strength sigmaomicron were identified. Fractured surfaces were imaged by a SEM. RESULTS: SEM/EDX analysis showed that cast alloy consists of two phases with differences in mean atomic number contrast, while no mean atomic number was identified for welded regions. EDX analysis revealed an increased Cr and Mo content at the alloy-joint interface. All mechanical properties of group I (TS, epsilon, m and sigmaomicron) were found inferior to R while group K showed intermediated values without significant differences to R and I, apart from elongation with group R. The fractured surfaces of all groups showed extensive dendritic pattern although with a finer structure in the case of welded groups. CONCLUSION: The K shape joint configuration should be preferred over the I, as it demonstrates improved mechanical strength and survival probability.

Comparative analysis of domestic and foreign medical MOOC / 中华医学图书情报杂志

Objective To provide the effective and convenient medical MOOC and remote medical education by comparatively analyzing domestic and foreign medical MOOC.Methods The following items were comparatively an-alyzed, including the number of medical MOOC, the universities offering medical MOOC, the languages used in teaching medical MOOC, the identification of MOOC, and the development of domestic and foreign medical MOOC on platforms of Coursera, edX, China university MOOC and people's health MOOC.Results The domestic medical MOOC still had a longer way to go than foreign medical MOOC in their number, scale and identification.Conclu-sion Domestic medical workers should grasp the opportunity to provide more effective and convenient medical MOOC platform.

Chemical and microbiological comparison of biodeterioration inColombian heritage constructions / Comparación química y microbiológica del biodeterioro en construcciones patrimoniales en Colombia

Se compararon química y microbiológicamente morterosde Bogotá, Villa de Leyva y Barichara. Las muestras seanalizaron por espectrometría de absorción y emisión atómica,espectroscopia infrarroja con transformada de Fourier,difracción de Rayos X, microscopía electrónica de barrido yespectroscopia por dispersión de energía. Se encontraron óxidosde silicio, aluminio, calcio, hierro, magnesio, yeso, weddellita,despuljosita, cuarzo, berlinita, carbonatos, mica, feldespatos,silicatos, sales de nitratos, sulfitos y compuestos orgánicos.A su vez, se hallaron partículas irregulares entre 10, 50 y 100µm y fibras de tipo orgánico de 20 µm. Se realizó el conteo deunidades formadoras de colonias por el método de dilucionespara identificar microorganismos fúngicos. Se identificaron lossiguientes géneros Aspergillus, Penicillium, Alternaria, Fusarium,Mucor y Syncephalastrum. La muestra de Bogotá presentó el mayornúmero de UFC/mL y el mayor porcentaje de humedad relativa.La concentración de hongos en esta muestra, a diferencia delas de Villa de Leyva y de Barichara, causó la degradación de lamayoría de los metales identificados. Esta comparación químicay microbiológica propone un plan eficaz de intervención paraeliminar y prevenir el biodeterioro en apoyo a la conservación deobras patrimoniales...

Mortars from Bogotá, Villa de Leyvaand Barichara were compared chemically andmicrobiologically. We analyzed the samples using atomicabsorption and emission spectrometry, Fourier-transforminfrared spectroscopy, X-ray diffraction, scanningelectron microscopy and energy dispersive spectroscopy.Oxides of silicon, aluminum, calcium, iron, magnesium,gypsum, weddellite, despujolsite, quartz, berlinite,carbonate, mica, feldspars, silicates, nitrate salts, sulfites,and organic compounds were identified. In addition,irregular particles between 10, 50 an 100 µm werefound, as well organic fibers of 20 µm. Was performeda CFU count using a dilution method to identify fungalmicroorganisms and found following genera Aspergillus,Penicillium, Alternaria, Fusarium, Mucor and Syncephalastrum.The mortar sample taken in Bogotá presented thehighest number of CFU/mL and the highest percentageof relative humidity. The concentration of fungi in thissample, unlike those from Villa de Leyva and Barichara,caused degradation in most of the metals identified.This chemical and microbiological comparison proposesan effective plan of action to eliminate and preventbiodeterioration in support of the conservation ofheritage constructions...

As amostras foram analisadas por espectrometria deemissão e espectroscopia de absorção atômica, infravermelhocom transformada de Fourier, difração de raios X, microscopiaeletrônica de varredura e espectroscopia de energia dispersiva.Foram identificados óxidos de silício, alumínio, cálcio, ferro,magnésio, gesso, weddellita, despuljosita, quartzo, berlinita,carbonato, mica, feldspato, silicatos, sais de nitratos, sulfitos, ecompostos orgânicos. Partículas irregulares entre os 10, 50 e 100µm foram encontradas bem como fibras de tipo orgânico de20 µm. Realizou-se uma contagem CFU usando um método dediluição para identificar microorganismos fúngicos e encontrousefungos dos gêneros Aspergillus, Penicillium, Alternaria, Fusarium,Mucor e Syncephalastrum. A amostra de Bogotá apresentou o maiornúmero de UFC/mL e umidade relativa do ar. A maior presençade fungos desta amostra, ao contrário das amostras da Villa deLeyva e Barichara, causou degradação na maioria dos metaisidentificados. Esta comparação química e microbiológica podesugerir um plano de ação eficaz para a eliminação e prevenção dabiodegradação e assim preservar obras patrimoniais.Departamento de Química, Facultad de Ciencias. PontificiaUniversidad Javeriana. Bogotá, D.C., Colombia.Departamento de Microbiología, Facultad de Ciencias. PontificiaUniversidad Javeriana. Bogotá, D.C., Colombia.Departamento de Biología, Facultad de Ciencias. PontificiaUniversidad Javeriana. Bogotá, D.C., Colombia.Departamento de Arquitectura, Facultad de Arquitectura y Diseño.Pontificia Javeriana. Bogotá, D.C., Colombia.Received: 15-12-2012 Accepted: 02-02-2013 Published on line: 28-02-2013 Edited by Alberto Acosta mUniversitas Scientiarum, Journal of the Faculty of Sciences, Pontificia Universidad Javeriana, is licensed under the Creative Commons 2.5 of Colombia: Attribution - Noncommercial - No Derivative...

Obtención de hidroxiapatita sintética por tres métodos diferentes y su caracterización para ser utilizada como sustituto óseo / Synthetic hydroxyapatite obtaining using three different methods and characterization to use it as bone substitute

El método de obtención de la hidroxiapatita (HAp) para ser utilizada como sustituto óseo, debe ofrecer un producto de alta pureza, rendimiento, rapidez y bajo costo, y contar con propiedades como bioactividad, biocompatibilidad, osteoconductividad y unión directa al hueso. En este trabajo se elaboró HAp sintética mediante tres métodos reportados en la literatura de vía sinterización y vía precipitación. El material obtenido se caracterizó por espectrometría de absorción atómica (AAS), espectrometría de absorción molecular (UV-Vis), espectroscopía infrarroja con transformada de Fourier (FTIR), difracción de rayos X (XRD), microscopía electrónica de barrido (SEM) y espectroscopía por dispersión de energía de rayos X (EDX). La ruta de síntesis de HAp por precipitación ofreció mejores resultados, comparados con la muestra estándar comercial y el hueso bovino, obteniéndose un tamaño de grano aproximado de 1 µm, relación molar Ca/P de 1,7, alta pureza y cristalinidad; mientras que los resultados obtenidos por vía sinterización mostraron la presencia de fases amorfas. El método de síntesis por precipitación vía húmeda usando nitratos de calcio y fosfatos, mostró ser práctico y adecuado para realizar la inmovilización de HAp sobre un soporte metálico como silicio, importante para su uso en cirugía reconstructiva en el área odontológica y médica.

The method by which to obtain Hydroxyapatite to be used as bone substitute should offer specific qualities such as, high purity, performance, low cost and has to be the following, bioactive, biocompatible, it has to have osteoconductivity and it has to bond directly to the bone. In this paper, synthetic HAp was prepared using 3 different methods reported in the literature as a route via sintering and precipitation, and subsequently characterized by atomic absorption spectrometry (AAS), molecular absorption spectrometry (UV-Vis), infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy X-ray (EDX). The route of synthesis of HAp precipitation gives better results, compared to the commercial standard sample and bovine bone, such as grain size which is of about 1 µm, molar ratio Ca/P of 1.7, high purity and crystallinity, while the results obtained via sintering show the presence of amorphous phases. The synthesis method using a wet precipitation of calcium nitrates and phosphates is practical and suitable for the immobilization of HAp on a metal substrate such as silicon, important for the use in dental and medical reconstructive surgery.

Estudo comparativo in vitro das estruturas orgânicas e inorgânicas da dentina saudável e esclerosada humana e bovina: nanodureza, concentração de Ca e P e análise morfológica / In vitro comparative study of organic and inorganic components analysis of health and sclerotic human and bovine dentin: nanohardness, Ca and P concentration and morphological analysis

A dentina esclerosada é um substrato comumente encontrado em pacientes idosos. No entanto, existem poucos estudos comparativos entre dentina humana e bovina esclerosadas. O objetivo deste estudo foi comparar os componentes inorgânicos e orgânicos da dentina saudável e esclerosada humana e bovina, através de cinco parâmetros: nanodureza, módulo de elasticidade, análise quantitativa da concentração de Cálcio (Ca) e Fósforo (P), densidade tubular e morfologia do colágeno. Trinta dentes humanos e 30 bovinos foram distribuídos em 4 grupos experimentais (n=15 por grupo): dentina humana saudável (DHS), esclerosada humana (DEH), bovina saudável (DBS), e bovina esclerosada (DBE). Os dentes saudáveis foram preparados na mesma altura e inclinação dos dentes esclerosados expondo níveis similares da dentina e obtendo fragmentos com 2mm de espessura. Foram realizadas 3 medições por espécime em 3 áreas pré determinadas de dentina intertubular com a utilização do Nanoindentador (carga de 500N por 5 s). Cinco espécimes de cada grupo foram preparados para Microscopia Eletrônica de Varredura (MEV). Com o auxílio da Energia Dispersiva por Raios-X EDX foram obtidos os valores (em percentagem) das concentrações de Ca e P e calculada a relação Ca:P. A contagem dos túbulos por área foi realizada em todas as eletromicrografias. Após descalcificação e preparo, o restante dos espécimes foi analisado em Microscopia Eletrônica de Transmissão (MET)...

The sclerotic dentin has been commonly found in elderly patients. However, there are scarce reports in the literature comparing on the use of human and bovine sclerotic dentins. The objective of this study was to compare inorganic and organic components of healthy and sclerotic dentins from human and bovine. Five parameters were analyzed: nanohardness, elastic modulus, quantitative analysis of Calcium (Ca) and Phosphorous (P) concentrations, tubular density and ultrastructural morphology. Thirty human teeth plus 30 bovine teeth were distributed in 4 experimental groups (n=15 per group): human healthy dentin (HHD), human sclerotic dentin (HSD), bovine healthy dentin (BHD) and bovine sclerotic dentin (BSD). Healthy teeth were cut in the same level and inclination of the sclerotic superficial dentins. The nanohardness and elastic modulus (GPa) of three pre determined areas of each exposed dentin was measured using a nanoindenter (500N for 5s). Five samples of each group were prepared for scanning electron microscopy (SEM) examination. Energy Dispersive X-ray (EDX) was used for obtaining the Ca/P ratio. The tubular density was obtained by counting the tubules in scanning electron micrographs taken in the same magnification and work distance...

Study about the possibility of estimating firing distance of "5.4" hand gun according to the GSR / 中国法医学杂志

Objective To study the relationship between GSR and firing distance, and to discuss whether the relationship can be used to estimate the firing distance. MethodsShotting porkets with "5.4" hand gun at the firing distance of 5, 10, 15, 20, 30, 40, 50, 60, 70, 80, 90, 120cm respectively, then observing the distributing and element of GSR with SEM/EDX and finally building the equation of regression. ResultsThe relationship between the quantity of GSR and firing distance is linear and the equation is built. When the firing distance is from 10 to 90cm, the result is preferably. ConclusionWe can estimate the "5.4"hand gun firing distance through testing GSR around gunshot wounds.

Calcium Cytocheiuical Localization and EDX Microanalysis in Myocardial Cells / 第二军医大学学报

Intracellular calcium distribution was studied in myocardial cells of mice by using pyroantimonate cytochemistry and EDX microanalysis. The results demonstrated that both OPP and PPP methods had a selective localization of intracellular bound calcium, and OPP method was more sensitive to calcium. The distribution of calcium in myocardial cells is highly departmentalized, and its mam pools were confined to sarcoplasmic reticulum and mitochondria. Calcium eylochemical localization is very useful in studying the effect of calcium in metabolism and pathogenesis of myocandial cells.

The Effects of Inosine and Rhizoma Ligustici Chuanxiong on Ischemia Injury of Renal Proximal Tubule Epithelial Cells: Cytochemical Study / 第二军医大学学报

Cytochemical methods were used to evaluate the changes of intracellular calcium, plasma membrane permeability and their relationship during ischemia and reflow in rat renal proximal tubule epithelia cells. In addition, the preventive effects of inosine and Rhizoma Ligustici Chuanxiong on ischemia and reperfusion cell injury were studied. The results showed that the preventive effects of inosine and Rhizoma Ligustici Chuanxiong were obvious. Redistribution and slight increase of calcium occurred during ischemic period in the proximal tubule cells. In this period the changes of plasma membrane permeability were gentle. Following the extention of reflow time, a large amount of calcium deposited in the cells and mitochondria. The plasma membrane became broken.